Avalanche dynamics in hierarchical fiber bundles

Creep failure of hierarchical materials

Creep failure of hierarchical materials is investigated by simulation of beam network models. Such models are idealizations of hierarchical fibrous materials where bundles of load-carrying fibers are held together by multi-level (hierarchical) cross-links. Failure of individual beams is assumed to be governed by stress-assisted thermal activation over local barriers, and beam stresses are computed by solving the global balance equations of linear and angular momentum across the network. Disorder is mimicked by a statistical distribution of barrier heights. Both initially intact samples and samples containing side notches of various length are considered. Samples with hierarchical cross-link patterns are simulated alongside reference samples where cross-links are placed randomly without hierarchical organization. The results demonstrate that hierarchical patterning may strongly increase creep strain and creep lifetime while reducing the lifetime variation. This is due to the fact that hierarchical patterning induces a failure mode that differs significantly from the standard scenario of failure by nucleation and growth of a critical crack. Characterization of this failure mode demonstrates good agreement between the present simulations and experimental findings on hierarchically patterned paper sheets.

On the utility of hierarchical self-healing fiber bundle materials under different environments

Bio-materials use a hierarchical structure to optimize their self-healing mechanical behavior. However, the utility may be restricted by different environments. In this paper, based on the previous work in Ji and Li (J Mater Sci 53:14858-14870, 2018) on the constitutive relation of hierarchical self-healing fiber bundle materials (FBMs), the stability is investigated for the mechanical-environmental interaction system established in Ji and Li (Int J Fract 212:105-112, 2018). With the principle of total potential, the stability criterion is proposed. The critical environment stiffness is derived and the system is therefore classified into the absolutely stable one and the conditionally stable one. For the conditionally stable system, the applied strain of FBMs reduces to be [0,[Formula: see text]], where [Formula: see text] is the cutoff strain. Finally, the toughness of hierarchical self-healing FBMs is studied for different interaction systems. The results show that in the absolutely stable system there exists a critical healing rate across which the toughness benefits from a hierarchical structure. In the conditionally stable system, the toughness is significantly affected by the environment stiffness, i.e., the toughness of a FBM increases with a rising hierarchical level, whereas it decreases with a rising healing rate. Moreover, the critical healing rate for toughness becomes greater compared to that in an absolutely stable system.