Collective performance of a finite-time quantum Otto cycle

Enhancing Otto refrigerator performance with a precooling strategy

The precooling strategy, which leads to exponentially faster heating, is a counterintuitive relaxation phenomenon wherein cooling the system before heating it dramatically shortens the relaxation time. We investigate the performance of a Markovian system functioning as an Otto refrigerator for a finite time, incorporating a precooling stage before the cyclic heating process. Our results demonstrate that precooling prior to the heating process in the Otto cycle optimizes the machine's performance by significantly enhancing the machine performance and the stability of the refrigerator.

Unifying collisional models and the Monte Carlo Metropolis method: Algorithms for dynamics of open quantum systems

Collisional models, or repeated interaction schemes, are a category of microscopic open quantum system models that have seen growing use in studying quantum thermalization, in which the bath is modeled as a large ensemble of identical ancillas that sequentially interact with the system. We demonstrate an equivalence between the system dynamics generated by the collisional model framework and the Metropolis algorithm, subject to two primary conditions. Namely, that each collisional model bath ancilla is prepared in a thermal state with a discrete spectrum that matches the energy eigenstate transitions of the system and that the ratio of the ancilla partition function to the number of system eigenstates remains small. If these conditions are satisfied, then the system dynamics generated by both methods are identical for arbitrary initial states and in both the steady-state and transient regimes. This allows the typically purely phenomenological Metropolis scheme to be used as a tool to study exact prethermalization dynamics without the need to explicitly model the system-bath interaction.

Universal Scaling Bounds on a Quantum Heat Current

In this Letter, we derive new bounds on a heat current flowing into a quantum L-particle system coupled with a Markovian environment. By assuming that a system Hamiltonian and a system-environment interaction Hamiltonian are extensive in L, we prove that the absolute value of the heat current scales at most as Θ(L^{3}) in a limit of large L. Furthermore, we present an example of noninteracting particles globally coupled with a thermal bath, for which this bound is saturated in terms of scaling. However, the construction of such a system requires many-body interactions induced by the environment, which may be difficult to realize with the existing technology. To consider more feasible cases, we consider a class of the system where any nondiagonal elements of the noise operator (derived from the system-environment interaction Hamiltonian) become zero in the system energy basis, if the energy difference exceeds a certain value ΔE. Then, for ΔE=Θ(L^{0}), we derive another scaling bound Θ(L^{2}) on the absolute value of the heat current, and the so-called superradiance belongs to a class for which this bound is saturated. Our results are useful for evaluating the best achievable performance of quantum-enhanced thermodynamic devices, including far-reaching applications such as quantum heat engines, quantum refrigerators, and quantum batteries.

Bounds on nonequilibrium fluctuations for asymmetrically driven quantum Otto engines

For a four-stroke asymmetrically driven quantum Otto engine with working medium modeled by a single qubit, we study the bounds on nonequilibrium fluctuations of work and heat. We find strict relations between the fluctuations of work and individual heat for hot and cold reservoirs in arbitrary operational regimes. Focusing on the engine regime, we show that the ratio of nonequilibrium fluctuations of output work to input heat from the hot reservoir is both upper and lower bounded. As a consequence, we establish a hierarchical relation between the relative fluctuations of work and heat for both cold and hot reservoirs and further make a connection with the thermodynamic uncertainty relations. We discuss the fate of these bounds also in the refrigerator regime. The reported bounds, for such asymmetrically driven engines, emerge once both the time-forward and the corresponding reverse cycles of the engine are considered on an equal footing. We also extend our study and report bounds for a parametrically driven harmonic oscillator Otto engine.

Optimal figure of merit of low-dissipation quantum refrigerators

The Drazin inverse of the Liouvillian superoperator provides a solution to determine the dynamics of a time-dependent system governed by the Markovian master equation. Under the condition of slow driving, the perturbation expansion of the density operator of the system in powers of time can be derived. As an application, a finite-time cycle model of the quantum refrigerator driven by a time-dependent external field is established. The method of the Lagrange multiplier is adopted as a strategy to find the optimal cooling performance. The figure of merit given by the product of the coefficient of performance and the cooling rate is taken as a new objective function, and, consequently, the optimally operating state of the refrigerator is revealed. The effects of the frequency exponent determining dissipation characteristics on the optimal performance of the refrigerator are discussed systemically. The results obtained show that the adjacent areas of the state of the maximum figure of merit are the best operation region of low-dissipative quantum refrigerators.

Collective effects on the performance and stability of quantum heat engines

Recent predictions for quantum-mechanical enhancements in the operation of small heat engines have raised renewed interest in their study both from a fundamental perspective and in view of applications. One essential question is whether collective effects may help to carry enhancements over larger scales, when increasing the number of systems composing the working substance of the engine. Such enhancements may consider not only power and efficiency, that is, its performance, but, additionally, its constancy, that is, the stability of the engine with respect to unavoidable environmental fluctuations. We explore this issue by introducing a many-body quantum heat engine model composed by spin pairs working in continuous operation. We study how power, efficiency, and constancy scale with the number of spins composing the engine and introduce a well-defined macroscopic limit where analytical expressions are obtained. Our results predict power enhancements, in both finite-size and macroscopic cases, for a broad range of system parameters and temperatures, without compromising the engine efficiency, accompanied by coherence-enhanced constancy for finite sizes. We discuss these quantities in connection to thermodynamic uncertainty relations.

Quantum-Enhanced Heat Engine Based on Superabsorption

We propose a quantum-enhanced heat engine with entanglement. The key feature of our scheme is superabsorption, which facilitates enhanced energy absorption by entangled qubits. Whereas a conventional engine with N separable qubits provides power with a scaling of P=Θ(N), our engine uses superabsorption to provide power with a quantum scaling of P=Θ(N^{2}). This quantum heat engine also exhibits a scaling advantage over classical ones composed of N-particle Langevin systems. Our work elucidates the quantum properties allowing for the enhancement of performance.

Molecular Polaritonics: Chemical Dynamics Under Strong Light-Matter Coupling

Chemical manifestations of strong light-matter coupling have recently been a subject of intense experimental and theoretical studies. Here we review the present status of this field. Section 1 is an introduction to molecular polaritonics and to collective response aspects of light-matter interactions. Section 2 provides an overview of the key experimental observations of these effects, while Section 3 describes our current theoretical understanding of the effect of strong light-matter coupling on chemical dynamics. A brief outline of applications to energy conversion processes is given in Section 4. Pending technical issues in the construction of theoretical approaches are briefly described in Section 5. Finally, the summary in Section 6 outlines the paths ahead in this exciting endeavor. Expected final online publication date for the Annual Review of Physical Chemistry, Volume 73 is April 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Periodically Driven Quantum Thermal Machines from Warming up to Limit Cycle

Theoretical treatments of periodically driven quantum thermal machines (PD-QTMs) are largely focused on the limit-cycle stage of operation characterized by a periodic state of the system. Yet, this regime is not immediately accessible for experimental verification. Here, we present a general thermodynamic framework that handles the performance of PD-QTMs both before and during the limit-cycle stage of operation. It is achieved by observing that periodicity may break down at the ensemble average level, even in the limit-cycle phase. With this observation, and using conventional thermodynamic expressions for work and heat, we find that a complete description of the first law of thermodynamics for PD-QTMs requires a new contribution, which vanishes only in the limit-cycle phase under rather weak system-bath couplings. Significantly, this contribution is substantial at strong couplings even at limit cycle, thus largely affecting the behavior of the thermodynamic efficiency. We demonstrate our framework by simulating a quantum Otto engine building upon a driven resonant level model. Our results provide new insights towards a complete description of PD-QTMs, from turn-on to the limit-cycle stage and, particularly, shed light on the development of quantum thermodynamics at strong coupling.

Many-body quantum thermal machines

Thermodynamics of quantum systems and quantum thermal machines are rapidly developing fields, which have already delivered several promising results, as well as raised many intriguing questions. Many-body quantum machines present new opportunities stemming from many-body effects. At the same time, they pose new challenges related to many-body physics. In this short review we discuss some of the recent developments on technologies based on many-body quantum systems. We mainly focus on many-body effects in quantum thermal machines. We also briefly address the role played by many-body systems in the development of quantum batteries and quantum probes.

Finite-time performance of a single-ion quantum Otto engine

We study how a quantum heat engine based on a single trapped ion performs in finite time. The always-on thermal environment acts like the hot bath, while the motional degree of freedom of the ion plays the role of the effective cold bath. The hot isochoric stroke is implemented via the interaction of the ion with its hot environment, while a projective measurement of the internal state of the ion is performed as an equivalent to the cold isochoric stroke. The expansion and compression strokes are implemented via suitable change in applied magnetic field. We study in detail how the finite duration of each stroke affects the engine performance. We show that partial thermalization can in fact enhance the efficiency of the engine, due to the residual coherence, whereas faster expansion and compression strokes increase the inner friction and therefore reduce the efficiency.

Geometrical Bounds of the Irreversibility in Markovian Systems

We derive geometrical bounds on the irreversibility in both quantum and classical Markovian open systems that satisfy the detailed balance condition. Using information geometry, we prove that irreversible entropy production is bounded from below by a modified Wasserstein distance between the initial and final states, thus strengthening the Clausius inequality in the reversible-Markov case. The modified metric can be regarded as a discrete-state generalization of the Wasserstein metric, which has been used to bound dissipation in continuous-state Langevin systems. Notably, the derived bounds can be interpreted as the quantum and classical speed limits, implying that the associated entropy production constrains the minimum time of transforming a system state. We illustrate the results on several systems and show that a tighter bound than the Carnot bound for the efficiency of quantum heat engines can be obtained.

Performance of quantum heat engines under the influence of long-range interactions

We examine a quantum heat engine with an interacting many-body working medium consisting of the long-range Kitaev chain to explore the role of long-range interactions in the performance of the quantum engine. By analytically studying two types of thermodynamic cycles, namely, the Otto cycle and Stirling cycle, we demonstrate that the work output and efficiency of a long-range interacting heat engine can be boosted by the long-range interactions, in comparison to the short-range counterpart. We further show that in the Otto cycle there exists an optimal condition for which the maximum enhancement in work output and efficiency can be achieved simultaneously by the long-range interactions. But, for the Stirling cycle, the condition which can give the maximum enhancement in work output does not lead to the maximum enhancement in efficiency. We also investigate how the parameter regimes under which the engine performance is enhanced by the long-range interactions evolve with a decrease in the range of interactions.

Thermodynamics of the Coarse-Graining Master Equation

We study the coarse-graining approach to derive a generator for the evolution of an open quantum system over a finite time interval. The approach does not require a secular approximation but nevertheless generally leads to a Lindblad-Gorini-Kossakowski-Sudarshan generator. By combining the formalism with full counting statistics, we can demonstrate a consistent thermodynamic framework, once the switching work required for the coupling and decoupling with the reservoir is included. Particularly, we can write the second law in standard form, with the only difference that heat currents must be defined with respect to the reservoir. We exemplify our findings with simple but pedagogical examples.

Optimal Cycles for Low-Dissipation Heat Engines

We consider the optimization of a finite-time Carnot engine characterized by small dissipations. We bound the power with a simple inequality and show that the optimal strategy is to perform small cycles around a given working point, which can be, thus, chosen optimally. Remarkably, this optimal point is independent of the figure of merit combining power and efficiency that is being maximized. Furthermore, for a general class of dissipative dynamics the maximal power output becomes proportional to the heat capacity of the working substance. Since the heat capacity can scale supraextensively with the number of constituents of the engine, this enables us to design optimal many-body Carnot engines reaching maximum efficiency at finite power per constituent in the thermodynamic limit.

Finite-time quantum Otto engine: Surpassing the quasistatic efficiency due to friction

In finite-time quantum heat engines, some work is consumed to drive a working fluid accompanying coherence, which is called "friction." To understand the role of friction in quantum thermodynamics, we present a couple of finite-time quantum Otto cycles with two different baths: Agarwal versus Lindbladian. We solve them exactly and compare the performance of the Agarwal engine with that of the Lindbladian engine. In particular, we find remarkable and counterintuitive results that the performance of the Agarwal engine due to friction can be much higher than that in the quasistatic limit with the Otto efficiency, and the power of the Lindbladian engine can be nonzero in the short-time limit. Based on additional numerical calculations of these outcomes, we discuss possible origins of such differences between two engines and reveal them. Our results imply that, even with an equilibrium bath, a nonequilibrium working fluid brings on the higher performance than what an equilibrium working fluid does.