Extrapolating the thermodynamic length with finite-time measurements

Optimal control theory for maximum power of Brownian heat engines

The pursuit of achieving the maximum output power in microscopic heat engines has gained increasing attention in the field of stochastic thermodynamics. We employ the optimal control theory to study Brownian heat engines and determine the optimal heat-engine cycles in a generic damped situation, which were previously known only in the overdamped and the underdamped limits. These optimal cycles include two isothermal processes, two adiabatic processes, and an extra isochoric relaxation process at the high stiffness constraint. Our results determine the maximum output power under realistic control constraints, and also bridge the gap of the optimal cycles between the overdamped and the underdamped limits. Hence, we solve an outstanding problem in the studies of heat engines by employing the optimal control theory to stochastic thermodynamics. These findings bring valuable insights for the design of high-performance Brownian heat engines in experimental setups.

Shortcut to finite-time memory erasure

To achieve fast computation, it is crucial to reset the memory to a desired state within a limited time. However, the inherent delay in the system's response often prevents reaching the desired state once the control process is completed in finite time. To address this challenge, we propose a shortcut strategy that incorporates an auxiliary control to guide the system towards an equilibrium state that corresponds to the intended control, thus enabling memory reset to desired accuracy regardless of the erasure speed. Through the application of thermodynamic geometry, we derive an optimal shortcut protocol for erasure processes that minimizes the energy cost. This research provides an effective design principle for realizing the finite-time erasure process to desired accuracy while simultaneously reducing the energy cost, thereby alleviating the burden of heat dissipation.

Efficiency bounds for bipartite information-thermodynamic systems

In this paper, we introduce an approach to derive a lower bound for the entropy production rate of a subsystem by utilizing the Cauchy-Schwarz inequality. It extends to establishing comprehensive upper and lower bounds for the efficiency of two subsystems. These bounds are applicable to a wide range of Markovian stochastic processes, which enhances the accuracy in depicting the range of energy conversion efficiency between subsystems. Empirical validation is conducted using a two-quantum-dot system model, which serves to confirm the effectiveness of our inequality in refining the boundaries of efficiency.

Thermodynamic Geometry of Nonequilibrium Fluctuations in Cyclically Driven Transport

Nonequilibrium thermal machines under cyclic driving generally outperform steady-state counterparts. However, there is still lack of coherent understanding of versatile transport and fluctuation features under time modulations. Here, we formulate a theoretical framework of thermodynamic geometry in terms of full counting statistics of nonequilibrium driven transports. We find that, besides the conventional dynamic and adiabatic geometric curvature contributions, the generating function is also divided into an additional nonadiabatic contribution, manifested as the metric term of full counting statistics. This nonadiabatic metric generalizes recent results of thermodynamic geometry in near-equilibrium entropy production to far-from-equilibrium fluctuations of general currents. Furthermore, the framework proves geometric thermodynamic uncertainty relations of near-adiabatic thermal devices, constraining fluctuations in terms of statistical metric quantities and thermodynamic length. We exemplify the theory in experimentally accessible driving-induced quantum chiral transport and Brownian heat pump.

Optimal figure of merit of low-dissipation quantum refrigerators

The Drazin inverse of the Liouvillian superoperator provides a solution to determine the dynamics of a time-dependent system governed by the Markovian master equation. Under the condition of slow driving, the perturbation expansion of the density operator of the system in powers of time can be derived. As an application, a finite-time cycle model of the quantum refrigerator driven by a time-dependent external field is established. The method of the Lagrange multiplier is adopted as a strategy to find the optimal cooling performance. The figure of merit given by the product of the coefficient of performance and the cooling rate is taken as a new objective function, and, consequently, the optimally operating state of the refrigerator is revealed. The effects of the frequency exponent determining dissipation characteristics on the optimal performance of the refrigerator are discussed systemically. The results obtained show that the adjacent areas of the state of the maximum figure of merit are the best operation region of low-dissipative quantum refrigerators.

Geodesic path for the optimal nonequilibrium transition: Momentum-independent protocol

Accelerating controlled thermodynamic processes requires an auxiliary Hamiltonian to steer the system into instantaneous equilibrium states. An extra energy cost is inevitably needed in such finite-time operation. We recently developed a geodesic approach to minimize such energy cost for the shortcut to isothermal process. The auxiliary control typically contains momentum-dependent terms, which are hard to be experimentally implemented due to the requirement of constantly monitoring the speed. In this work, we employ a variational auxiliary control without the momentum-dependent force to approximate the exact control. Following the geometric approach, we obtain the optimal control protocol with variational minimum energy cost. We demonstrate the construction of such protocol via an example of Brownian motion with a controllable harmonic potential.

Optimizing Brownian heat engine with shortcut strategy

Shortcuts to isothermality provide a powerful method to speed up quasistatic thermodynamic processes within finite-time manipulation. We employ the shortcut strategy to design and optimize Brownian heat engines, and we formulate a geometric description of the energetics with the thermodynamic length. We obtain a tight and reachable bound of the output power for shortcut-driven heat engines. The bound is reached by the optimal shortcut protocol to vary the control parameters with a proper constant velocity of the thermodynamic length. With the shortcut strategy, we optimize the control of Brownian heat engines to achieve the maximum power in the general-damped situation. We also derive the efficiency at the maximum power and the maximum power at the given efficiency for shortcut-driven heat engines.

Minimal energy cost to initialize a bit with tolerable error

Landauer's principle imposes a fundamental limit on the energy cost to perfectly initialize a classical bit, which is only reached under the ideal operation with infinitely long time. The question on the cost in the practical operation for a bit has been raised under the constraint by the finiteness of operation time. We discover a raise-up of energy cost by L^{2}(ε)/τ from the Landaeur's limit (k_{B}Tln2) for a finite-time τ initialization of a bit with an error probability ε. The thermodynamic length L(ε) between the states before and after initializing in the parametric space increases monotonously as the error decreases. For example, in the constant dissipation coefficient (γ_{0}) case, the minimal additional cost is 0.997k_{B}T/(γ_{0}τ) for ε=1% and 1.288k_{B}T/(γ_{0}τ) for ε=0.1%. Furthermore, the optimal protocol to reach the bound of minimal energy cost is proposed for the bit initialization realized via a finite-time isothermal process.

Microscopic theory of the Curzon-Ahlborn heat engine based on a Brownian particle

The Curzon-Ahlborn (CA) efficiency, as the efficiency at the maximum power (EMP) of the endoreversible Carnot engine, has significant impact on finite-time thermodynamics. However, the CA engine is based on many assumptions. In the past few decades, although a lot of efforts have been made, a microscopic theory of the CA engine is still lacking. By adopting the method of the stochastic differential equation of energy, we formulate a microscopic theory of the CA engine realized with a highly underdamped Brownian particle in a class of nonharmonic potentials. This theory gives microscopic interpretation of all assumptions made by Curzon and Ahlborn. In other words, we find a microscopic counterpart of the CA engine in stochastic thermodynamics. Also, based on this theory, we derive the explicit expression of the protocol associated with the maximum power for any given efficiency, and we obtain analytical results of the power and the efficiency statistics for the Brownian CA engine. Our research brings new perspectives to experimental studies of finite-time microscopic heat engines featured with fluctuations.

Geodesic Path for the Minimal Energy Cost in Shortcuts to Isothermality

Shortcuts to isothermality are driving strategies to steer the system to its equilibrium states within finite time, and enable evaluating the impact of a control promptly. Finding the optimal scheme to minimize the energy cost is of critical importance in applications of this strategy in pharmaceutical drug tests, biological selection, and quantum computation. We prove the equivalence between designing the optimal scheme and finding the geodesic path in the space of control parameters. Such equivalence allows a systematic and universal approach to find the optimal control to reduce the energy cost. We demonstrate the current method with examples of a Brownian particle trapped in controllable harmonic potentials.