Shear-induced crystallization in jammed systems

Crystallization in load-controlled shearing flows of monosized spheres

Identical, inelastic spheres crystallize when sheared between two parallel, bumpy planes under a constant load larger than a minimum value. We investigate the effect of the inter-particle friction coefficient of the sheared particles on the flow dynamics and the crystallization process with discrete element simulations. If the imposed load is about the minimum value to observe crystallization in frictionless spheres, adding small friction to the granular assembly results in a shear band adjacent to one of the planes and one crystallized region, where a plug flow is observed. The ordered particles are arranged in both face-centered cubic and hexagonal-closed packed phases. The particles in the shear band are in between the crystalline state and the fluid state, but the latter is never reached, which results in a large shear resistance. As the particle friction increases, the shear band disappears, and the ordering in the core region is destroyed. A significant portion of the particles are in a fluid state with a zero shear rate, leading to a substantial and unexpected reduction in the shear resistance with respect to the frictionless case. If the imposed load is increased well above the minimum from the onset of crystallization, we observe the formation of one shear band in the core, where the particles are again between the crystalline state and the fluid state, surrounded by two crystallized regions near the boundaries, in which most of the particles are in the face-centered cubic phase and translate as a rigid body with the boundaries themselves. In this case, the macroscopic shear resistance is independent of the particle friction.

Rheology of periodically sheared suspensions undergoing reversible-irreversible transition

The rheology of noncolloidal suspensions under cyclic shear is studied numerically. The main findings are a strain amplitude (γ_{0}) dependent response in the shear stress and second normal stress difference (N_{2}). Specifically, we find a reduced viscosity, an enhanced intracycle shear thinning, the onset of a finite N_{2}, and its frequency doubling, all near a critical strain amplitude γ_{c} that scales with the volume fraction ϕ as γ_{c}∼ϕ^{-2}. These rheological changes also signify a reversible-irreversible transition (RIT), dividing stroboscopic particle dynamics into a reversible absorbing phase (for γ_{0}<γ_{c}) and a persistently diffusing phase (for γ_{0}>γ_{c}). We explain the results based on two flow-induced mechanisms and elucidate their connection in the context of RIT through the underlying microstructure, which tends toward hyperuniformity near γ_{0}=γ_{c}. Overall, we expect this correspondence between rheology and emergent dynamics to hold in a wide range of settings where structural organizations are dominated by volume exclusions.

Isothermal Crystallization and Time-Temperature Transformation of Amorphous Nifedipine: A Case of Polymorphism Formation and Conversion

Crystallization of active pharmaceutical ingredients (APIs) from the supercooled liquid state is an important issue in determining the stability of amorphous pharmaceutical dispersions. In the present study, the isothermal crystallization from the supercooled liquid state of the pharmaceutical compound nifedipine was investigated by both rheological and differential scanning calorimetry (DSC) measurements, and the crystallization kinetics was fitted to the Johnson-Mehl-Avrami (JMA) equation. Both the crystallization induction time and completion time from the two methods were used to construct the time-temperature-transformation (TTT) diagram for nifedipine. A model based on a modification of classical homogeneous nucleation and crystal growth theory was employed to fit the induction and completion time curves. Both DSC and rheological methods give similar results for the crystallization kinetics of the nifedipine. From the crystallization kinetics modeling, the solid-liquid interfacial surface tension σ_SL of nifedipine was estimated and the value was found to be consistent with prior results obtained from melting point depression measurements as a function of crystal size. Evidence is shown that for temperatures below 110 °C, at the early stage of nucleation, NIF first nucleates into the metastable β'-form and later converts into the stable α-form during the isothermal crystallization. We are also able to report the heat of fusion of the γ'-NIF based on the calorimetric experiments.

Homogeneous nucleation of sheared liquids: advances and insights from simulations and theory

One of the most ubiquitous and technologically important phenomena in nature is the nucleation of homogeneous flowing systems. The microscopic effects of shear on a nucleating system are still imperfectly understood, although in recent years a consistent picture has emerged. The opposing effects of shear can be split into two major contributions for simple atomic and molecular liquids: increase of the energetic cost of nucleation, and enhancement of the kinetics. In this perspective, we describe the latest computational and theoretical techniques which have been developed over the past two decades. We collate and unify the overarching influences of shear, temperature, and supersaturation on the process of homogeneous nucleation. Experimental techniques and capabilities are discussed, against the backdrop of results from simulations and theory. Although we primarily focus on simple systems, we also touch upon the sheared nucleation of more complex systems, including glasses and polymer melts. We speculate on the promising directions and possible advances that could come to fruition in the future.

Large-scale ordering of nanoparticles using viscoelastic shear processing

Despite the availability of elaborate varieties of nanoparticles, their assembly into regular superstructures and photonic materials remains challenging. Here we show how flexible films of stacked polymer nanoparticles can be directly assembled in a roll-to-roll process using a bending-induced oscillatory shear technique. For sub-micron spherical nanoparticles, this gives elastomeric photonic crystals termed polymer opals showing extremely strong tunable structural colour. With oscillatory strain amplitudes of 300%, crystallization initiates at the wall and develops quickly across the bulk within only five oscillations. The resulting structure of random hexagonal close-packed layers is improved by shearing bidirectionally, alternating between two in-plane directions. Our theoretical framework indicates how the reduction in shear viscosity with increasing order of each layer accounts for these results, even when diffusion is totally absent. This general principle of shear ordering in viscoelastic media opens the way to manufacturable photonic materials, and forms a generic tool for ordering nanoparticles.

Crystal nucleation and cluster-growth kinetics in a model glass under shear

Crystal nucleation and growth processes induced by an externally applied shear strain in a model metallic glass are studied by means of nonequilibrium molecular dynamics simulations, in a range of temperatures. We observe that the nucleation-growth process takes place after a transient, induction regime. The critical cluster size and the lag-time associated with this induction period are determined from a mean first-passage time analysis. The laws that describe the cluster-growth process are studied as a function of temperature and strain rate. A theoretical model for crystallization kinetics that includes the time dependence for nucleation and cluster growth is developed within the framework of the Kolmogorov-Johnson-Mehl-Avrami scenario and is compared with the molecular dynamics data. Scalings for the cluster-growth laws and for the crystallization kinetics are also proposed and tested. The observed nucleation rates are found to display a nonmonotonic strain rate dependency.

Microscopic structural relaxation in a sheared supercooled colloidal liquid

The rheology of dense amorphous materials under large shear strain is not fully understood, partly due to the difficulty of directly viewing the microscopic details of such materials. We use a colloidal suspension to simulate amorphous materials and study the shear-induced structural relaxation with fast confocal microscopy. We quantify the plastic rearrangements of the particles in several ways. Each of these measures of plasticity reveals spatially heterogeneous dynamics, with localized regions where many particles are strongly rearranging by these measures. We examine the shapes of these regions and find them to be essentially isotropic, with no alignment in any particular direction. Furthermore, individual particles are equally likely to move in any direction other than the overall bias imposed by the strain.

Shear-induced crystallization of an amorphous system

The influence of a stationary shear flow on the crystallization in a glassy system is studied by means of molecular dynamics simulations and subsequent cluster analysis. The results reveal two opposite effects of the shear flow on the processes of topological ordering in the system. Shear promotes the formation of separated crystallites and suppresses the appearance of the large clusters. The shear-induced ordering proceeds in two stages, where the first stage is related mainly to the growth of crystallites and the second stage is due to an adjustment of the created clusters and a progressive alignment of their lattice directions. The influence of strain and shear rate on the crystallization is also investigated. In particular, we find two plausible phenomenological relations between the shear rate and the characteristic time scale needed for ordering of the amorphous system under shear.