Weighted reciprocal of temperature, weighted thermal flux, and their applications in finite-time thermodynamics

Performance of Quantum Heat Engines Enhanced by Adiabatic Deformation of Trapping Potential

We present a quantum Otto engine model alternatively driven by a hot and a cold heat reservoir and consisting of two isochoric and two adiabatic strokes, where the adiabatic expansion or compression is realized by adiabatically changing the shape of the potential. Here, we show that such an adiabatic deformation may alter operation mode and enhance machine performance by increasing output work and efficiency, even with the advantage of decreasing work fluctuations. If the heat engine in the sudden limit operates under maximal power by optimizing the control parameter, the efficiency shows certain universal behavior, η*=ηC/2+ηC2/8+O(ηC3), where ηC=1-βhr/βcr is the Carnot efficiency, with βhr(βcr) being the inverse temperature of the hot (cold) reservoir. However, such efficiency under maximal power can be produced by our machine model in the regimes where the machine without adiabatic deformation can only operate as a heater or a refrigerator.

Driving rapidly while remaining in control: classical shortcuts from Hamiltonian to stochastic dynamics

Stochastic thermodynamics lays down a broad framework to revisit the venerable concepts of heat, work and entropy production for individual stochastic trajectories of mesoscopic systems. Remarkably, this approach, relying on stochastic equations of motion, introduces time into the description of thermodynamic processes-which opens the way to fine control them. As a result, the field of finite-time thermodynamics of mesoscopic systems has blossomed. In this article, after introducing a few concepts of control for isolated mechanical systems evolving according to deterministic equations of motion, we review the different strategies that have been developed to realize finite-time state-to-state transformations in both over and underdamped regimes, by the proper design of time-dependent control parameters/driving. The systems under study are stochastic, epitomized by a Brownian object immersed in a fluid; they are thus strongly coupled to their environment playing the role of a reservoir. Interestingly, a few of those methods (inverse engineering, counterdiabatic driving, fast-forward) are directly inspired by their counterpart in quantum control. The review also analyzes the control through reservoir engineering. Besides the reachability of a given target state from a known initial state, the question of the optimal path is discussed. Optimality is here defined with respect to a cost function, a subject intimately related to the field of information thermodynamics and the question of speed limit. Another natural extension discussed deals with the connection between arbitrary states or non-equilibrium steady states. This field of control in stochastic thermodynamics enjoys a wealth of applications, ranging from optimal mesoscopic heat engines to population control in biological systems.

Maximum efficiency of low-dissipation heat pumps at given heating load

We derive an analytical expression for maximum efficiency at fixed power of heat pumps operating along a finite-time reverse Carnot cycle under the low-dissipation assumption. The result is cumbersome, but it implies simple formulas for tight upper and lower bounds on the maximum efficiency and various analytically tractable approximations. In general, our results qualitatively agree with those obtained earlier for endoreversible heat pumps. In fact, we identify a special parameter regime when the performance of the low-dissipation and endoreversible devices is the same. At maximum power, heat pumps operate as work to heat converters with efficiency 1. Expressions for maximum efficiency at given power can be helpful in the identification of more practical operation regimes.

Finite-power performance of quantum heat engines in linear response

We investigate the finite-power performance of quantum heat engines working in the linear response regime where the temperature gradient is small. The engine cycles with working substances of ideal harmonic systems consist of two heat transfer and two adiabatic processes, such as the Carnot cycle, Otto cycle, and Brayton cycle. By analyzing the optimal protocol under maximum power we derive the explicitly analytic expression for the irreversible entropy production, which becomes the low dissipation form in the long duration limit. Assuming the engine to be endoreversible, we derive the universal expression for the efficiency at maximum power, which agrees well with that obtained from the phenomenological heat transfer laws holding in the classical thermodynamics. Through appropriate identification of the thermodynamic fluxes and forces that a linear relation connects, we find that the quantum engines under consideration are tightly coupled, and the universality of efficiency at maximum power is confirmed at the linear order in the temperature gradient.

Efficiency Bounds for Minimally Nonlinear Irreversible Heat Engines with Broken Time-Reversal Symmetry

We study the minimally nonlinear irreversible heat engines in which the time-reversal symmetry for the systems may be broken. The expressions for the power and the efficiency are derived, in which the effects of the nonlinear terms due to dissipations are included. We show that, as within the linear responses, the minimally nonlinear irreversible heat engines can enable attainment of Carnot efficiency at positive power. We also find that the Curzon-Ahlborn limit imposed on the efficiency at maximum power can be overcome if the time-reversal symmetry is broken.

Thermodynamics of Majority-Logic Decoding in Information Erasure

We investigate the performance of majority-logic decoding in both reversible and finite-time information erasure processes performed on macroscopic bits that contain N microscopic binary units. While we show that for reversible erasure protocols single-unit transformations are more efficient than majority-logic decoding, the latter is found to offer several benefits for finite-time erasure processes: Both the minimal erasure duration for a given erasure and the minimal erasure error for a given erasure duration are reduced, if compared to a single unit. Remarkably, the majority-logic decoding is also more efficient in both the small-erasure error and fast-erasure region. These benefits are also preserved under the optimal erasure protocol that minimizes the dissipated heat. Our work therefore shows that majority-logic decoding can lift the precision-speed-efficiency trade-off in information erasure processes.

General relations between the power, efficiency, and dissipation for the irreversible heat engines in the nonlinear response regime

We derive the general relations between the maximum power, maximum efficiency, and minimum dissipation for the irreversible heat engine in a nonlinear response regime. In this context, we use the minimally nonlinear irreversible model and obtain the lower and upper bounds of the above relations for the asymmetric dissipation limits. These relations can be simplified further when the system possesses the time-reversal symmetry or antisymmetry. We find that our results are the generalization of various such relations obtained earlier for different heat engines.

Universality of maximum-work efficiency of a cyclic heat engine based on a finite system of ultracold atoms

We study the performance of a cyclic heat engine which uses a small system with a finite number of ultracold atoms as its working substance and works between two heat reservoirs at constant temperatures T h and T c ( Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Zhuolin Ye Department of Physics, Nanchang University, Nanchang, 330031, China
Yingying Hu Department of Physics, Nanchang University, Nanchang, 330031, China
Jizhou He Department of Physics, Nanchang University, Nanchang, 330031, China
Jianhui Wang Department of Physics, Nanchang University, Nanchang, 330031, China. Department of Chemistry and Biochemistry, University of Maryland, College Park, MD, 20742, USA. State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing, 100190, China.

Collapse

Endoreversible quantum heat engines in the linear response regime

We analyze general models of quantum heat engines operating a cycle of two adiabatic and two isothermal processes. We use the quantum master equation for a system to describe heat transfer current during a thermodynamic process in contact with a heat reservoir, with no use of phenomenological thermal conduction. We apply the endoreversibility description to such engine models working in the linear response regime and derive expressions of the efficiency and the power. By analyzing the entropy production rate along a single cycle, we identify the thermodynamic flux and force that a linear relation connects. From maximizing the power output, we find that such heat engines satisfy the tight-coupling condition and the efficiency at maximum power agrees with the Curzon-Ahlborn efficiency known as the upper bound in the linear response regime.

Molecular kinetic analysis of a local equilibrium Carnot cycle

We identify a velocity distribution function of ideal gas particles that is compatible with the local equilibrium assumption and the fundamental thermodynamic relation satisfying the endoreversibility. We find that this distribution is a Maxwell-Boltzmann distribution with a spatially uniform temperature and a spatially varying local center-of-mass velocity. We construct the local equilibrium Carnot cycle of an ideal gas, based on this distribution, and show that the efficiency of the present cycle is given by the endoreversible Carnot efficiency using the molecular kinetic temperatures of the gas. We also obtain an analytic expression of the efficiency at maximum power of our cycle under a small temperature difference. Our theory is also confirmed by a molecular dynamics simulation.

Efficiency and its bounds of minimally nonlinear irreversible heat engines at arbitrary power

The efficiency for minimally nonlinear irreversible heat engines at any arbitrary power has been systematically evaluated, and general lower and upper efficiency bounds under the tight coupling condition for different operating regions have been proposed, which can be seen as the generalization of the bounds [η_{C}/2<η_{maxP}<η_{C}/(2-η_{C})] on efficiency at maximum power (η_{maxP}), where η_{C} means the Carnot efficiency. We have also calculated the universal bounds of the maximum gain in efficiency in different operating regions to give further insight into the efficiency gain with the power away from the maximum power. In the region of higher loads (higher than the load which corresponds to the maximum power), a small power loss away from the maximum power induces a much larger gain in efficiency. As actual heat engines may not work at the maximum power condition, this paper may contribute to operating actual heat engines more efficiently.

Efficiency at maximum power and efficiency fluctuations in a linear Brownian heat-engine model

We investigate the stochastic thermodynamics of a two-particle Langevin system. Each particle is in contact with a heat bath at different temperatures T_{1} and T_{2} (<T_{1}), respectively. Particles are trapped by a harmonic potential and driven by a linear external force. The system can act as an autonomous heat engine performing work against the external driving force. Linearity of the system enables us to examine thermodynamic properties of the engine analytically. We find that the efficiency of the engine at maximum power η_{MP} is given by η_{MP}=1-sqrt[T_{2}/T_{1}]. This universal form has been known as a characteristic of endoreversible heat engines. Our result extends the universal behavior of η_{MP} to nonendoreversible engines. We also obtain the large deviation function of the probability distribution for the stochastic efficiency in the overdamped limit. The large deviation function takes the minimum value at macroscopic efficiency η=η[over ¯] and increases monotonically until it reaches plateaus when η≤η_{L} and η≥η_{R} with model-dependent parameters η_{R} and η_{L}.

Efficiency at maximum power of a quantum heat engine based on two coupled oscillators

We propose and theoretically investigate a system of two coupled harmonic oscillators as a heat engine. We show how these two coupled oscillators within undamped regime can be controlled to realize an Otto cycle that consists of two adiabatic and two isochoric processes. During the two isochores the harmonic system is embedded in two heat reservoirs at constant temperatures T(h) and T(c)(<T(h)), respectively, and it is tuned slowly along a protocol to realize an adiabatic process. To illustrate the performance in finite time of the quantum heat engine, we adopt the semigroup approach to model the thermal relaxation dynamics along the two isochoric processes, and we find the upper bound of efficiency at maximum power (EMP) η* to be a function of the Carnot efficiency η(C)(=1-T(c)/T(h)): η*≤η(+)≡η(C)(2)/[η(C)-(1-η(C))ln(1-η(C))], identical to those previously derived from ideal (noninteracting) microscopic, mesoscopic, and macroscopic systems.

Four-level refrigerator driven by photons

We propose a quantum absorption refrigerator driven by photons. The model uses a four-level system as its working substance and couples simultaneously to hot, cold, and solar heat reservoirs. Explicit expressions for the cooling power Q̇(c) and coefficient of performance (COP) η(COP) are derived, with the purpose of revealing and optimizing the performance of the device. Our model runs most efficiently under the tight coupling condition, and it is consistent with the third law of thermodynamics in the limit T→0.

Heat devices in nonlinear irreversible thermodynamics

We present results obtained by using nonlinear irreversible models for heat devices. In particular, we focus on the global performance characteristics, the maximum efficiency and the efficiency at maximum power regimes for heat engines, and the maximum coefficient of performance (COP) and the COP at maximum cooling power regimes for refrigerators. We analyze the key role played by the interplay between irreversibilities coming from heat leaks and internal dissipations. We also discuss the relationship between these results and those obtained by different models.

Constitutive relation for nonlinear response and universality of efficiency at maximum power for tight-coupling heat engines

We present a unified perspective on nonequilibrium heat engines by generalizing nonlinear irreversible thermodynamics. For tight-coupling heat engines, a generic constitutive relation for nonlinear response accurate up to the quadratic order is derived from the stalling condition and the symmetry argument. By applying this generic nonlinear constitutive relation to finite-time thermodynamics, we obtain the necessary and sufficient condition for the universality of efficiency at maximum power, which states that a tight-coupling heat engine takes the universal efficiency at maximum power up to the quadratic order if and only if either the engine symmetrically interacts with two heat reservoirs or the elementary thermal energy flowing through the engine matches the characteristic energy of the engine. Hence we solve the following paradox: On the one hand, the quadratic term in the universal efficiency at maximum power for tight-coupling heat engines turned out to be a consequence of symmetry [Esposito, Lindenberg, and Van den Broeck, Phys. Rev. Lett. 102, 130602 (2009); Sheng and Tu, Phys. Rev. E 89, 012129 (2014)]; On the other hand, typical heat engines such as the Curzon-Ahlborn endoreversible heat engine [Curzon and Ahlborn, Am. J. Phys. 43, 22 (1975)] and the Feynman ratchet [Tu, J. Phys. A 41, 312003 (2008)] recover the universal efficiency at maximum power regardless of any symmetry.

Efficiency at maximum power of a quantum Otto cycle within finite-time or irreversible thermodynamics

We consider the efficiency at maximum power of a quantum Otto engine, which uses a spin or a harmonic system as its working substance and works between two heat reservoirs at constant temperatures T(h) and T(c) (<T(h)). Although the behavior of spin-1/2 system differs substantially from that of the harmonic system in that they obey two typical quantum statistics, the efficiencies at maximum power based on these two different kinds of quantum systems are bounded from the upper side by the same expression η(mp)≤η(+)≡η(C)(2)/[η(C)-(1-η(C))ln(1-η(C))] with η(C)=1-T(c)/T(h) as the Carnot efficiency. This expression η(mp) possesses the same universality of the CA efficiency η(CA)=1-√(1-η(C)) at small relative temperature difference. Within the context of irreversible thermodynamics, we calculate the Onsager coefficients and show that the value of η(CA) is indeed the upper bound of EMP for an Otto engine working in the linear-response regime.

Coefficient of performance under maximum χ criterion in a two-level atomic system as a refrigerator

A two-level atomic system as a working substance is used to set up a refrigerator consisting of two quantum adiabatic and two isochoric processes (two constant-frequency processes ω_{a} and ω_{b} with ω_{a}<ω_{b}), during which the two-level system is in contact with two heat reservoirs at temperatures T_{h} and T_{c}(<T_{h}). Considering finite-time operation of two isochoric processes, we derive analytical expressions for cooling rate R and coefficient of performance (COP) ɛ. The COP at maximum χ(=ɛR) figure of merit is numerically determined, and it is proved to be in nice agreement with the so-called Curzon and Ahlborn COP ɛ_{CA}=sqrt[1+ɛ_{C}]-1, where ɛ_{C}=T_{c}/(T_{h}-T_{c}) is the Carnot COP. In the high-temperature limit, the COP at maximum χ figure of merit, ɛ^{*}, can be expressed analytically by ɛ^{*}=ɛ_{+}≡(sqrt[9+8ɛ_{C}]-3)/2, which was derived previously as the upper bound of optimal COP for the low-dissipation or minimally nonlinear irreversible refrigerators. Within the context of irreversible thermodynamics, we prove that the value of ɛ_{+} is also the upper bound of COP at maximum χ figure of merit when we regard our model as a linear irreversible refrigerator.

Performance optimization of minimally nonlinear irreversible heat engines and refrigerators under a trade-off figure of merit

A performance optimization for minimally nonlinear heat engines and refrigerators is conducted under an optimization criterion of Ω. The results show that under tight-coupling conditions, the efficiency and coefficient of performance (COP) bounds in asymmetric dissipation limits are the same as those obtained by de Tomas et al. [Phys. Rev. E 87, 012105 (2013)] for low dissipation heat devices. The efficiency bounds for heat engines under nontight-coupling conditions are also analyzed and the experimental results lie between theoretical results obtained under different coupling strengths. For refrigerators, the theoretical results are also in good agreement with some observed results. The efficiency and COP bounds under the Ω criterion are refined, which are closer to real heat engines and refrigerators.

Stochastic heat engine with the consideration of inertial effects and shortcuts to adiabaticity

When a Brownian particle in contact with a heat bath at a constant temperature is controlled by a time-dependent harmonic potential, its distribution function can be rigorously derived from the Kramers equation with the consideration of the inertial effect of the Brownian particle. Based on this rigorous solution and the concept of shortcuts to adiabaticity, we construct a stochastic heat engine by employing the time-dependent harmonic potential to manipulate the Brownian particle to complete a thermodynamic cycle. We find that the efficiency at maximum power of this stochastic heat engine is equal to 1-sqrt[T(c)/T(h)], where T(c) and T(h) are the temperatures of the cold bath and the hot one in the thermodynamic cycle, respectively.