Definite existence of subphases with eight- and ten-layer unit cells as studied by complementary methods, electric-field-induced birefringence and microbeam resonant x-ray scattering

Response to an applied electric field in an antiferroelectric 1/2 subphase: The role of thermal fluctuations

The response to an applied electric field in the q_{T}=1/2 subphase of the MC881-MC452 binary mixture system is studied by using thick homeotropically aligned cells. In the ordinary antiferroelectric SmC_{A}^{*} and 1/2 (sub)phases, some nonplanar asymmetric distortions in the antiferroelectric unit cell structure produce induced polarization in the applied field direction, starts to unwind the helix from the beginning, and tends to align the averaged tilt plane direction parallel to the applied field. In the 1/2 subphase under consideration, however, the helix resists being deformed at the beginning and then the thresholdlike steep increase of birefringence Δn occurs in the transition from 1/2 to unwound SmC^{*} at a field of less than 0.5 V/µm; we conclude that the thermal fluctuations play an important role in promoting the director flip-flopping in a single layer under the applied field and bring about additional induced polarization, which counteracts the aforementioned ordinary induced one and prevents the helix from unwinding. This suggests that the Langevin-like director reorientation is the mechanism of the V-shaped switching which was actually observed in the thin films of Mitsui mixture [Phys. Rev. Lett. 87, 015701 (2001)0031-900710.1103/PhysRevLett.87.015701] and must have been used in prototyped thresholdless antiferroelectric liquid-crystal displays.

Variety of subphase emerging sequences, the frustration of three main phases, SmC_{A}^{*}, SmC^{*}, and SmA, and the long-range interlayer interactions

Prompted by the existence of biaxial subphases 1/4, 2/5, and 3/7 [Phys. Rev. E 96, 012701 (2017)2470-004510.1103/PhysRevE.96.012701], we reconsidered the three-phase frustration and the resulting degeneracy lifting by combining the phase diagram of SmC_{A}^{*}, SmC^{*}, and SmA with the discrete flexoelectric effect. We systematically calculated the phase diagrams and tried to understand the overall picture of the phenomena by means of a simple and intuitively clear way in terms of minimal number of parameters. The treatment naturally explains the highly distorted helical structures of the biaxial subphases as well as the microscopic helical short-pitch of SmC_{α}^{*} which increases or decreases accordingly with rising temperature. The regular subphase emerging sequence is SmC_{A}^{*}(SmC_{α}^{*})-1/4-1/3-2/5-3/7-1/2-SmC^{*}(SmC_{α}^{*}), where the subphases other than 1/3 and 1/2 may or may not emerge. At the same time, we can see a variety of irregular sequences; in particular, any one of the biaxial subphases may singly emerge between SmC_{A}^{*}(SmC_{α}^{*}) and (SmC^{*})SmC_{α}^{*}. Moreover, the experimentally confirmed extraordinary subphase emerging sequence SmC^{*}-1/2-SmC_{α}^{*} appears for particular parameter values. Contrastingly to these affirmative aspects, some calculated results are contradictory to the previously reported experimental results: the change from SmC_{A}^{*} and SmC^{*} to SmC_{α}^{*} is always continuous, the 6-layer 2/3 subphase is not stabilized, and the subphase emerging sequence SmC_{A}^{*}-1/3-SmC^{*} does not appear. The causes of inconsistency and how to resolve them were discussed in comparisons with experimental findings.

Synchrotron Microbeam Diffraction Studies on the Alignment within 3D-Printed Smectic-A Liquid Crystal Elastomer Filaments during Extrusion

3D printing of novel and smart materials has received considerable attention due to its applications within biological and medical fields, mostly as they can be used to print complex architectures and particular designs. However, the internal structure during 3D printing can be problematic to resolve. We present here how time-resolved synchrotron microbeam Small-Angle X-ray Diffraction (μ-SAXD) allows us to elucidate the local orientational structure of a liquid crystal elastomer-based printed scaffold. Most reported 3D-printed liquid crystal elastomers are mainly nematic; here, we present a Smectic-A 3D-printed liquid crystal elastomer that has previously been reported to promote cell proliferation and alignment. The data obtained on the 3D-printed filaments will provide insights into the internal structure of the liquid crystal elastomer for the future fabrication of liquid crystal elastomers as responsive and anisotropic 3D cell scaffolds.

Chiral Symmetry Breaking in Liquid Crystals: Appearance of Ferroelectricity and Antiferroelectricity

The study of chiral symmetry breaking in liquid crystals and the consequent emergence of ferroelectric and antiferroelectric phases is described. Furthermore, we show that the frustration between two phases induces a variety of structural phases called subphases and that resonant X-ray scattering is a powerful tool for the structural analysis of these complicated subphases. Finally, we discuss the future prospects for clarifying the origin of such successive phase transition.

Chirality of Liquid Crystals Formed from Achiral Molecules Revealed by Resonant X-Ray Scattering

Intensive research on chiral liquid crystals (LCs) has been fueled by their actively tunable physicochemical properties and structural complexity, comparable to those of sophisticated natural materials. Herein, recent progress in the discovery of new classes of chiral LCs, enabled by a combination of nano- and macroscale investigations is reviewed. First, an overview is provided of liquid crystalline phases, made of chiral and achiral low-weight molecules, that exhibit chiral structure and/or chiral morphology. Then, recent progress in the discovery of new classes of chiral LCs, particularly enabled by the application of resonant X-ray scattering is described. It is shown that the method is sensitive to modulations of molecular orientation and therefore provides information hardly accessible by means of other techniques, such as the sense of helical structures or chirality transfer across length scales. Finally, a perspective is presented on the future scope, opportunities, and challenges in the field of chiral LCs, in particular related to nanocomposites.

Dielectric study of a subphase stabilized in an exceptionally wide temperature range by a delicate balance of interlayer interactions and thermal fluctuations

The chiral smectic phases of calamitic liquid crystals, SmC^{*} and SmC_{A}^{*}, are characterized by the synclinic ferroelectric F ordering and the anticlinic antiferroelectric A ordering in adjacent layers. Various states with mixed A and F orderings are degenerate at the frustrated phase-transition point. The degeneracy lifting is commonly caused by the long-range interlayer interactions (LRILIs), producing a series of biaxial subphases specified by a relative ratio of both orderings, q_{T}=[F]/([A]+[F]). Sandhya et al. [Phys. Rev. E 87, 012502 (2013)PLEEE81539-375510.1103/PhysRevE.87.012502] established, however, the importance of thermal fluctuations in the degeneracy lifting in some binary mixtures of MC881 and MC452. They observed the most intriguing interplay of thermal fluctuations and LRILIs in the stabilization of an apparently single subphase. Since no other detailed experimental study of the subphase has so far been made, we carry out its dielectric investigations and clarify the following five points: (1) the subphase is surely a single phase from ≈80^{∘}C down to room temperature; (2) the imaginary part of complex permittivity ε^{″} shows the weak antiphase mode and hence it must be antiferroelectric q_{T}=1/2; (3) ε^{″} becomes much stronger above ≈80^{∘}C, indicating the emergence of ferroelectric and/or ferrielectric states; (4) the dielectric amplitude gradually increases at least just above the 1/2 subphase, suggesting it be due to a continuous increase of q_{T}; and (5) at low temperatures the antiphase relaxation mode shows irregularities that indicate the important role played by the cooperative motion of the layer undulation as well as of the director tilting.

Unexpected electric-field-induced antiferroelectric liquid crystal phase in the SmC_{α}^{*} temperature range and the discrete flexoelectric effect

The unique nanometer-sized helical structure in SmC_{α}^{*} may sometimes evolve continuously to the micrometer-sized one in SmC^{*}; conceivably ferroelectric SmC_{α}^{*} is to be unwound by an applied electric field. By drawing electric-field-induced birefringence contours in the field-temperature phase diagram and by studying the superlattice structure of the field-induced subphase with resonant x-ray scattering, we established that an applied field unexpectedly stabilizes the well-known antiferroelectric four-layer biaxial subphase as well as the other prototypal ferrielectric three-layer one in the SmC_{α}^{*} temperature range; the effective long-range interlayer interaction due to the discrete flexoelectric effect actually plays an important role in stabilizing not only the biaxial subphases but also the optically uniaxial SmC_{α}^{*} subphase, contrary to the notion that the competition between the direct interactions of the nearest-neighbor layers and those of the next-nearest-neighbor layers should be required for the nanometer-sized helical structure.

Resonant x-ray scattering observation of transitional subphases during the electric-field-induced phase transition in a mixture of Se-containing chiral smectic liquid crystals

Using resonant x-ray scattering techniques, transitional subphases during the electric-field-induced phase transition of a mixture of Se-containing chiral liquid crystals, 80% AS657 and 20% AS620, in a planar-aligned cell geometry were investigated, where the prototypical phase sequence SmC_{A}^{*}-SmC_{γ}^{*}-AF-SmC^{*} was observed; the transitional subphases were formed during the transition from the three-layer periodicity phase to the ferroelectric phase. In the lower-temperature range where the three-layer SmCγ^{*} phase appeared under the low electric field, nine- and six-layer subphases and a "streak" pattern appeared in sequence after the transition from the SmCγ^{*} phase with increasing applied electric field; the ferroelectric phase was realized. In the higher-temperature range where the four-layer AF phase appeared under a low electric field, the AF phase changed to a three-layer phase at the medium electric field. The twelve-, nine-, and six-layer subphases subsequently appeared in sequence, and finally the ferroelectric phase was generated with increasing electric field. The molecular arrangements of the field-induced subphases, especially the newly found nine-layer periodicity phase, was analyzed. The successive field-induced phase transition of the present results was compared with that of our previous results for pure Se-containing and Br-containing liquid crystals, and the relation to the three-layer ferrielectric phase was discussed.