Direct-drive measurements of laser-imprint-induced shock velocity nonuniformities

Solid-to-plasma transition of polystyrene induced by a nanosecond laser pulse within the context of inertial confinement fusion

Laser direct drive (LDD) inertial confinement fusion (ICF) involves irradiating a spherical target of thermonuclear fuel coated with an ablator, usually made of polystyrene. Laser energy absorption near the target surface leads to matter ablation, hydrodynamic shocks, and ultimately capsule implosion. The conservation of spherical symmetry is crucial for implosion efficiency, yet spatial modulations in laser intensity can induce nonuniformities, causing the laser imprint phenomenon. Understanding laser imprint, especially considering the initial solid state, is essential for advancing LDD ICF. A first microscopic model of solid-to-plasma transition was built in 2019, accounting for laser absorption in the solid state with a band-structure-based ionization model. This model has been improved to include chemical fragmentation and a more accurate description of electron collision frequency in various matter states. The latest development involves assessing the model's reliability by comparing theoretical predictions with experimental observations. Despite the success of this approach, questions remain, leading to further investigations and observations under different irradiation conditions. This work presents an experiment with a nanosecond pulse, taking into account hydrodynamic effects, and measures transmission dynamics over the entire laser beam area to observe two-dimensional effects. The objective is to adapt the theoretical model, couple it with a hydrodynamic code, and observe additional effects related to the initial solid state.

Imaging velocity interferometer system for any reflector (VISAR) diagnostics for high energy density sciences

Two variants of optical imaging velocimetry, specifically the one-dimensional streaked line-imaging and the two-dimensional time-resolved area-imaging versions of the Velocity Interferometer System for Any Reflector (VISAR), have become important diagnostics in high energy density sciences, including inertial confinement fusion and dynamic compression of condensed matter. Here, we give a brief review of the historical development of these techniques, then describe the current implementations at major high energy density (HED) facilities worldwide, including the OMEGA Laser Facility and the National Ignition Facility. We illustrate the versatility and power of these techniques by reviewing diverse applications of imaging VISARs for gas-gun and laser-driven dynamic compression experiments for materials science, shock physics, condensed matter physics, chemical physics, plasma physics, planetary science and astronomy, as well as a broad range of HED experiments and laser-driven inertial confinement fusion research.

Improved modeling of the solid-to-plasma transition of polystyrene ablator for laser direct-drive inertial confinement fusion hydrocodes

The target performance of laser direct-drive inertial confinement fusion (ICF) can be limited by the development of hydrodynamic instabilities resulting from the nonhomegeneous laser absorption at the target surface, i.e., the laser imprint on the ablator. To understand and describe the formation of these instabilities, the early ablator evolution during the laser irradiation should be considered. In this work, an improved modeling of the solid-to-plasma transition of a polystyrene ablator for laser direct-drive ICF is proposed. This model is devoted to be implemented in hydrocodes dedicated to ICF which generally assume an initial plasma state. The present approach consists of the two-temperature model coupled to the electron, ion and neutral dynamics including the chemical fragmentation of polystyrene. The solid-to-plasma transition is shown to significantly influence the temporal evolution of both free electron density and temperatures, which can lead to different shock formation and propagation compared with an initial plasma state. The influence of the solid-to-plasma transition on the shock dynamics is evidenced by considering the scaling law of the pressure with respect to the laser intensity. The ablator transition is shown to modify the scaling law exponent compared with an initial plasma state.

Recent progress in quantifying hydrodynamics instabilities and turbulence in inertial confinement fusion and high-energy-density experiments

Since the seminal paper of Nuckolls triggering the quest of inertial confinement fusion (ICF) with lasers, hydrodynamic instabilities have been recognized as one of the principal hurdles towards ignition. This remains true nowadays for both main approaches (indirect drive and direct drive), despite the advent of MJ scale lasers with tremendous technological capabilities. From a fundamental science perspective, these gigantic laser facilities enable also the possibility to create dense plasma flows evolving towards turbulence, being magnetized or not. We review the state of the art of nonlinear hydrodynamics and turbulent experiments, simulations and theory in ICF and high-energy-density plasmas and draw perspectives towards in-depth understanding and control of these fascinating phenomena. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 2)'.

The importance of the laser pulse-ablator interaction dynamics prior to the ablation plasma phase in inertial confinement fusion studies

This work presents studies which demonstrate the importance of the very early heating dynamics of the ablator long before the ablation plasma phase begins in laser driven inertial confinement fusion (ICF) studies. For the direct-drive fusion concept using lasers, the development of perturbations during the thermo-elasto-plastic (TEP) and melting phases of the interaction of the laser pulse with the ablator's surface may act as seeding to the subsequent growth of hydro-dynamic instabilities apparent during the acceleration phase of the interaction such as for instance the Rayleigh-Taylor and the Richtmyer-Meshkov, which strongly affect the implosion dynamics of the compression phase. The multiphysics-multiphase finite-element method (FEM) simulation results are experimentally validated by advanced three-dimensional whole-field dynamic imaging of the surface of the ablator allowing for a transverse to the surface spatial resolution of only approximately 1 nm. The study shows that the TEP and melting phases of the interaction are of crucial importance since transverse perturbations of the ablator's surface can reach tens of nanometres in amplitude within the TEP and melting phases. Such perturbations are of Rayleigh type and are transferred from the ablator to the substrate from the very first moments of the interaction. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 1)'.

Implementing a microphysics model in hydrodynamic simulations to study the initial plasma formation in dielectric ablator materials for direct-drive implosions

A microphysics model to describe the photoionization and impact ionization processes in dielectric ablator materials like plastic has been implemented into the one-dimensional hydrodynamic code LILAC for planar and spherical targets. At present, the initial plasma formation during the early stages of a laser drive are modeled in an ad hoc manner, until the formation of a critical surface. Implementation of the physics-based models predict higher values of electron temperature and pressure than the ad hoc model. Moreover, the numerical predictions are consistent with previous experimental observations of the shinethrough mechanism in plastic ablators. For planar targets, a decompression of the rear end of the target was observed that is similar to recent experiments. An application of this model is to understand the laser-imprint mechanism that is caused by nonuniform laser irradiation due to single beam speckle.

Modeling the solid-to-plasma transition for laser imprinting in direct-drive inertial confinement fusion

Laser imprinting possesses a potential danger for low-adiabat and high-convergence implosions in direct-drive inertial confinement fusion (ICF). Within certain direct-drive ICF schemes, a laser picket (prepulse) is used to condition the target to increase the interaction efficiency with the main pulse. Whereas initially the target is in a solid state (of ablators such as polystyrene) with specific electronic and optical properties, the current state-of-the-art hydrocodes assume an initial plasma state, which ignores the detailed plasma formation process. To overcome this strong assumption, a model describing the solid-to-plasma transition, eventually aiming at being implemented in hydrocodes, is developed. It describes the evolution of main physical quantities of interest, including the free electron density, collision frequency, absorbed laser energy, temperatures, and pressure, during the first stage of the laser-matter interaction. The results show that a time about 100 ps is required for the matter to undergo the phase transition, the initial solid state thus having a notable impact on the subsequent plasma dynamics. The nonlinear absorption processes (associated to the solid state) are also shown to have an influence on the thermodynamic quantities after the phase transition, leading to target deformations depending on the initial solid state. The negative consequences for the ICF schemes consist in shearing of the ablator and possibly preliminary heating of the deuterium-tritium fuel.