Dispersion engineering for vertical microcavities using subwavelength gratings

Bound state in the continuum and polarization-insensitive electric mirror in a low-contrast metasurface

High-contrast refractive indices are pivotal in dielectric metasurfaces for inducing various exotic phenomena, such as the bound state in the continuum (BIC) and electric mirror (EM). However, the limitations of high-index materials are adverse to practical applications, thus, low-contrast metasurfaces offering comparable performance are highly desired. Here, we present a low-contrast dielectric metasurface composed of radial anisotropic cylinders, which are SiO2 cylinders doped with a small amount of WS2. The cylinder exhibits unidirectional forward superscattering resulting from the overlap of the electric and magnetic dipole resonances. When a near-infrared plane wave incident normally, the metasurface consisting of the superscattering constituents manifests a polarization-insensitive EM. In contrast, when subjected to an in-plane incoming wave, the metasurface generates a symmetry-protected BIC characterized by an ultrahigh Q factor and nearly negligible out-of-plane energy radiation. Notably, the EM response of the metasurface exhibits robustness to deviation in the number and thickness of WS2 layers. Our work highlights the doping approach as an efficient strategy for designing low-contrast functional metasurfaces, thereby shedding new light on the potential applications in photonic integrated circuits and on-chip optical communication.

Tamm-cavity terahertz detector

Efficiently fabricating a cavity that can achieve strong interactions between terahertz waves and matter would allow researchers to exploit the intrinsic properties due to the long wavelength in the terahertz waveband. Here we show a terahertz detector embedded in a Tamm cavity with a record Q value of 1017 and a bandwidth of only 469 MHz for direct detection. The Tamm-cavity detector is formed by embedding a substrate with an Nb5N6 microbolometer detector between an Si/air distributed Bragg reflector (DBR) and a metal reflector. The resonant frequency can be controlled by adjusting the thickness of the substrate layer. The detector and DBR are fabricated separately, and a large pixel-array detector can be realized by a very simple assembly process. This versatile cavity structure can be used as a platform for preparing high-performance terahertz devices and opening up the study of the strong interactions between terahertz waves and matter.

Concept of inverted refractive-index-contrast grating mirror and exemplary fabrication by 3D laser micro-printing

Highly reflective mirrors are indispensable components in a variety of state-of-the-art photonic devices. Typically used, bulky, multi-layered distributed Bragg (DBR) reflectors are limited to lattice-matched semiconductors or nonconductive dielectrics. Here, we introduce an inverted refractive index-contrast grating (ICG) as compact, single-layer alternative to DBR. In the ICG, a subwavelength one-dimensional grating made of a low-refractive-index material is implemented on a high-refractive-index cladding. Our numerical simulations show that the ICG provides nearly total optical power reflectance for the light incident from the side of the cladding whenever the refractive index of the grating exceeds 1.75, irrespective of the refractive index of the cladding. Additionally, the ICG enables polarization discrimination and phase tuning of the reflected and transmitted light, the property not achievable with the DBR. We experimentally demonstrate a proof-of-concept ICG fabricated according to the proposed design, using the technique of sub-µm 3D laser lithography in which thin stripes of IP-Dip photoresist are micro-printed on a Si cladding. This one-step method avoids laborious and often destructive etching-based procedures for grating structuration, making it possible to implement the grating on any arbitrary cladding material.

Kerker-type positional disorder immune metasurfaces

Metasurfaces that can operate without a strictly periodic arrangement of meta-atoms are highly desirable for practical optical micro-nano devices. In this paper, we propose two kinds of Kerker-type metasurfaces that exhibit immunity to positional disorder. These metasurfaces consist of two distinct core-shell cylinders that satisfy the first and second Kerker conditions, respectively. Despite significant positional disorder perturbations of the meta-atoms, the metasurfaces can maintain excellent performance comparable to periodic ones, including total transmission and magnetic mirror responses. This positional disorder immunity arises from the unidirectional forward or backward scattering of a single core-shell cylinder, which results in minimal lateral scattering coupling between neighboring cylinders, thereby having little impact on multiple scattering in either the forward or backward direction. In contrast, the response of positional disorder non-Kerker-type metasurfaces decreases significantly. Our findings present a new approach for designing robust metasurfaces and expanding the applications of metasurfaces in sensing and communications within complex practical scenarios.

Chiral electroluminescence from thin-film perovskite metacavities

Chiral light sources realized in ultracompact device platforms are highly desirable for various applications. Among active media used for thin-film emission devices, lead-halide perovskites have been extensively studied for photoluminescence due to their exceptional properties. However, up to date, there have been no demonstrations of chiral electroluminescence with a substantial degree of circular polarization (DCP) based on perovskite materials, being critical for the development of practical devices. Here, we propose a concept of chiral light sources based on a thin-film perovskite metacavity and experimentally demonstrate chiral electroluminescence with a peak DCP approaching 0.38. We design a metacavity created by a metal and a dielectric metasurface supporting photonic eigenstates with a close-to-maximum chiral response. Chiral cavity modes facilitate asymmetric electroluminescence of pairs of left and right circularly polarized waves propagating in the opposite oblique directions. The proposed ultracompact light sources are especially advantageous for many applications requiring chiral light beams of both helicities.

Wavelength-stabilized near-field laser

Surface-trapped electromagnetic waves can be localized at a boundary between a semiconductor distributed Bragg reflector (DBR) and a homogeneous dielectric medium or air. These waves enable a novel class of in-plane-emitting optical devices including edge-emitting lasers, disk microlasers or near-field fiber-coupled lasers. We show that the surface-trapped modes can be controlled by tuning the thickness of a single DBR layer. Diagrams in variables "wavelength - thickness of the control layer" are constructed for both TM and TE optical modes revealing the parameter domains, in which surface-trapped modes exist. The domains contain cusps, in the vicinity of which a surface-trapped optical mode is allowed only in a narrow spectral region, enabling wavelength-stabilized operation of a laser. For a structure designed for lasing at ∼1 µm, the lasing wavelength shifts upon temperature increase at a rate ∼0.08 nm/K. The fraction of the optical power of the surface-trapped mode accumulated in the homogeneous dielectric can reach ∼50%. Thus, such structure is a near-field wavelength-stabilized semiconductor laser. Further, such structure can be applied as a wavelength-stabilized semiconductor optical amplifier adjacent to a dielectric waveguide or an optical fiber, both for integrated photonics and for ultrahigh-brightness laser diodes and diode arrays and stacks.

Virtual cavity in distributed Bragg reflectors

We show theoretically and experimentally that distributed Bragg reflector (DBR) supports a surface electromagnetic wave exhibiting evanescent decay in the air and oscillatory decay in the DBR. The wave exists in TM polarization only. The field extension in the air may reach several wavelengths of light. Once gain medium is introduced into the DBR a novel class of diode lasers, semiconductor optical amplifiers, light-emitting diodes, etc. can be developed allowing a new type of in-plane or near-field light outcoupling. To improve the wavelength stability of the laser diode, a resonant cavity structure can be coupled to the DBR, allowing a coupled state of the cavity mode and the near-field mode. A GaAlAs-based epitaxial structure of a vertical-cavity surface-emitting laser (VCSEL) having an antiwaveguiding cavity and multiple GaInAs quantum wells as an active region was grown and processed as an in-plane Fabry-Pérot resonator with cleaved facets. Windows in the top stripe contact were made to facilitate monitoring of the optical modes. Three types of the optical modes were observed in electroluminescence (EL) studies under high current densities > 1 kA/cm². Mode A with the longest wavelength is a VCSEL-like mode emitting normal to the surface. Mode B has a shorter wavelength, emitting light at two symmetric lobes tilted with respect to the normal to the surface in the direction parallel to the stripe. Mode C has the shortest wavelength and shifts with a temperature at a rate 0.06 nm/K. Polarization studies reveal predominantly TE emission for modes A and B and purely TM for mode C in agreement with the theory. Spectral position, thermal shift and polarization of mode C confirm it to be a coupled state of the cavity mode and near-field DBR surface-trapped mode.

Symmetry Breaking in Photonic Crystals: On-Demand Dispersion from Flatband to Dirac Cones

We demonstrate that symmetry breaking opens a new degree of freedom to tailor energy-momentum dispersion in photonic crystals. Using a general theoretical framework in two illustrative practical structures, we show that breaking symmetry enables an on-demand tuning of the local density of states of the same photonic band from zero (Dirac cone dispersion) to infinity (flatband dispersion), as well as any constant density over an adjustable spectral range. As a proof of concept, we demonstrate experimentally the transformation of the very same photonic band from a conventional quadratic shape to a Dirac dispersion, a flatband dispersion, and a multivalley one. This transition is achieved by finely tuning the vertical symmetry breaking of the photonic structures. Our results provide an unprecedented degree of freedom for optical dispersion engineering in planar integrated photonic devices.

Dynamical dispersion engineering in coupled vertical cavities employing a high-contrast grating

Photon’s effective mass is an important parameter of an optical cavity mode, which determines the strength of light-matter interaction. Here, we propose a novel method for controlling the photon’s effective mass by using coupled photonic cavities and designing the angular dependence of the coupling strength. This can be implemented by employing a high-contrast grating (HCG) as the coupling reflector in a system of two coupled vertical cavities, and engineering both the HCG reflection phase and amplitude response. Several examples of HCG-based coupled cavities with novel features are discussed, including a case capable of dynamically controlling the photon’s effective mass to a large extent while keeping the resonance frequency same. We believe that full-control and dynamical-tuning of the photon’s effective mass may enable new possibilities for cavity quantum electrodynamics studies or conventional/polariton laser applications. For instance, one can dynamically control the condensate formation in polariton lasers by modifying the polariton mass.

Widely tunable 1060-nm VCSEL with high-contrast grating mirror

We report tunable VCSELs emitting around 1060 nm, enabled by high-contrast grating (HCG) mirror. Single-mode continuous-wave (CW) operation up to 110 °C is demonstrated, with room-temperature single-mode output power >1.3 mW at a very low threshold of ~300 µA. The obtained thermal resistance of 0.88 °C/mW is low for VCSELs with an oxide-confined laser aperture. A wide, continuous tuning range up to 40 nm was achieved with electrostatic and thermal tuning, at a fast tuning speed up to 1.15 MHz. In addition, we developed transverse-mode control designs of HCGs to greatly improve the single-mode yield of oxidized VCSELs. The cost-effective, wafer-scale fabrication makes these VCSELs promising as tunable light sources for swept-source optical coherent tomography (SS-OCT) and LiDAR applications.

Ultrahigh-speed Si-integrated on-chip laser with tailored dynamic characteristics

For on-chip interconnects, an ideal light source should have an ultralow energy consumption per bandwidth (operating en-ergy) as well as sufficient output power for error-free detection. Nanocavity lasers have been considered the most ideal for smaller operating energy. However, they have a challenge in obtaining a sufficient output power. Here, as an alternative, we propose an ultrahigh-speed microcavity laser structure, based on a vertical cavity with a high-contrast grating (HCG) mirror for transverse magnetic (TM) polarisation. By using the TM HCG, a very small mode volume and an un-pumped compact optical feedback structure can be realised, which together tailor the frequency response function for achieving a very high speed at low injection currents. Furthermore, light can be emitted laterally into a Si waveguide. From an 1.54-μm optically-pumped laser, a 3-dB frequency of 27 GHz was obtained at a pumping level corresponding to sub-mA. Using measured 3-dB frequen-cies and calculated equivalent currents, the modulation current efficiency factor (MCEF) is estimated to be 42.1 GHz/mA^1/2, which is superior among microcavity lasers. This shows a high potential for a very high speed at low injection currents or avery small heat generation at high bitrates, which are highly desirable for both on-chip and off-chip applications.

Normal incidence filters using symmetry-protected modes in dielectric subwavelength gratings

We investigate narrowband transmission filters based on subwavelength-grating reflectors at normal incidence. Computational results show that the filtering is realized through symmetry-protected mode coupling. The guided mode resonances introduced by the slab layer allow flexible control of the filter frequencies. The quality factor of the filters could exceed 10⁶. Dielectric gratings can be used over the entire range of electromagnetic waves, owing to their scale-invariant operations. Owing to the high refraction index and low index dispersion of semiconductors in the infrared range, these filters can be applied over a broad range from near infrared to terahertz frequencies.

High-quality-factor planar optical cavities with laterally stopped, slowed, or reversed light

In a planar optical cavity, the resonance frequencies increase as a function of in-plane wavevector according to a standard textbook formula. This has well-known consequences in many different areas of optics, from the shifts of etalon peaks at non-normal angles, to the properties of transverse modes in laser diodes, to the effective mass of microcavity photons, and so on. However, this standard formula is valid only when the reflection phase of each cavity mirror is approximately independent of angle. There is a certain type of mirror-a subwavelength dielectric grating near a guided mode resonance-with not only a strongly angle-dependent reflection phase, but also very high reflectance and low losses. Simulations show that by using such mirrors, high-quality-factor planar cavities can be designed that break all these textbook rules, leading to resonant modes that are slow, stopped or even backward-propagating in the in-plane direction. In particular, we demonstrate experimentally high-Q planar cavities whose resonance frequency is independent of in-plane wavevector-i.e., the resonant modes have zero in-plane group velocity, for one polarization but both in-plane directions. We discuss potential applications in various fields including lasers, quantum optics, and exciton-polariton condensation.

Hybrid III-V/SOI resonant cavity enhanced photodetector

A hybrid III-V/SOI resonant-cavity-enhanced photodetector (RCE-PD) structure comprising a high-contrast grating (HCG) reflector, a hybrid grating (HG) reflector, and an air cavity between them, has been proposed and investigated. In the proposed structure, a light absorbing material is integrated as part of the HG reflector, enabling a very compact vertical cavity. Numerical investigations show that a quantum efficiency close to 100 % and a detection linewidth of about 1 nm can be achieved, which are desirable for wavelength division multiplexing applications. Based on these results, a hybrid RCE-PD sample has been fabricated by heterogeneously integrating an InP-based material onto a silicon-on-insulator wafer and has been characterized, which shows a clear enhancement in photo-current at the designed wavelength. This indicates that the HG reflector provides a field enhancement sufficient for RCE-PD operation. In addition, a capability of feasibly selecting the detection wavelength during fabrication as well as a possibility of realizing silicon-integrated bidirectional transceivers are discussed.

Fano resonances of dielectric gratings: symmetries and broadband filtering

The guided mode resonances (GMRs) of diffraction gratings surrounded by low index materials can be designed to produce broadband regions of near perfect reflection and near perfect transmission. These have many applications, including in optical isolators, in hybrid lasers cavities and in photovoltaics. The excitation of rapid GMRs occurs in a background of slowly varying Fabry-Perot oscillation, which produces Fano resonances. We demonstrate the critical role of the polarity of adjacent Fano resonances in the formation of the broadband features. We design gratings for photovoltaic applications that operate at wavelengths where material absorption must be considered and where light is incident at non-normal angles.

Broadband high reflectivity in subwavelength-grating slab waveguides

We computationally study a subwavelength dielectric grating structure, show that slab waveguide modes can be used to obtain broadband high reflectivity, and analyze how slab waveguide modes influence reflection. A structure showing interference between Fabry-Perot modes, slab waveguide modes, and waveguide array modes is designed with ultra-broadband high reflectivity. Owing to the coupling of guided modes, the region with reflectivity R > 0.99 has an ultra-high bandwidth (Δf / ̅f > 30%). The incident-angle region with R > 0.99 extends over a range greater than 40°. Moreover, an asymmetric waveguide structure with a semiconductor substrate is studied.