Temporal Narrowing of Neutrons Produced by High-Intensity Short-Pulse Lasers

Stable high repetition-rate laser-driven proton beam production for multidisciplinary applications on the advanced laser light source ion beamline

Laser-driven proton accelerators are relevant candidates for many applications such as material science or medicine. Today, there are multi-hundred-TW table-top laser systems that can generate relativistic peak intensities >1018 W/cm2 and routinely reach proton energies in the MeV range. However, for most desired applications, there is still a need to optimize the quality and stability of the laser-generated proton beam. In this work, we developed a 0.625 Hz high repetition-rate setup in which a laser with 2.5% RMS energy stability is irradiating a solid target with an intensity of 1019 to 1020 W/cm2 to explore proton energy and yield variations, both with high shot statistics (up to about 400 laser shots) and using different interaction targets. Investigating the above-mentioned parameters is important for applications that rely on specific parts of the proton spectrum or a high ion flux produced over quick multi-shot irradiation. We demonstrate that the use of a stable "multi-shot mode" allows improving applications, e.g., in the detection of trace elements using laser-driven particle-induced x-ray emission.

High-Flux Neutron Generator Based on Laser-Driven Collisionless Shock Acceleration

A novel compact high-flux neutron generator with a pitcher-catcher configuration based on laser-driven collisionless shock acceleration (CSA) is proposed and experimentally verified. Different from those that previously relied on target normal sheath acceleration (TNSA), CSA in nature favors not only acceleration of deuterons (instead of hydrogen contaminants) but also increasing of the number of deuterons in the high-energy range, therefore having great advantages for production of high-flux neutron source. The proof-of-principle experiment has observed a typical CSA plateau feature from 2 to 6 MeV in deuteron energy spectrum and measured a forward neutron flux with yield 6.6×10^{7}  n/sr from the LiF catcher target, an order of magnitude higher than the compared TNSA case, where the laser intensity is 10^{19}  W/cm^{2}. Self-consistent simulations have reproduced the experimental results and predicted that a high-flux forward neutron source with yield up to 5×10^{10}  n/sr can be obtained when laser intensity increases to 10^{21}  W/cm^{2} under the same laser energy.

High-flux neutron generation by laser-accelerated ions from single- and double-layer targets

Contemporary ultraintense, short-pulse laser systems provide extremely compact setups for the production of high-flux neutron beams, such as those required for nondestructive probing of dense matter, research on neutron-induced damage in fusion devices or laboratory astrophysics studies. Here, by coupling particle-in-cell and Monte Carlo numerical simulations, we examine possible strategies to optimise neutron sources from ion-induced nuclear reactions using 1-PW, 20-fs-class laser systems. To improve the ion acceleration, the laser-irradiated targets are chosen to be ultrathin solid foils, either standing alone or preceded by a plasma layer of near-critical density to enhance the laser focusing. We compare the performance of these single- and double-layer targets, and determine their optimum parameters in terms of energy and angular spectra of the accelerated ions. These are then sent into a converter to generate neutrons via nuclear reactions on beryllium and lead nuclei. Overall, we identify configurations that result in neutron yields as high as $$\sim 10^{10}\,{\mathrm{n}}\,{\mathrm{sr}}^{-1}$$ ∼ 10 10 n sr - 1 in $$\sim 1$$ ∼ 1 -cm-thick converters or instantaneous neutron fluxes above $$10^{23}\,{\mathrm{n}}\,{\mathrm{cm}}^{-2}\,{\mathrm{s}}^{-1}$$ 10 23 n cm - 2 s - 1 at the backside of $$\lesssim 100$$ ≲ 100 -$$\upmu$$ μ m-thick converters. Considering a realistic repetition rate of one laser shot per minute, the corresponding time-averaged neutron yields are predicted to reach values ($$\gtrsim 10^7\,{\mathrm{n}} \,{\mathrm{sr}}^{-1}\,{\mathrm{s}}^{-1}$$ ≳ 10 7 n sr - 1 s - 1 ) well above the current experimental record, and this even with a mere thin foil as a primary target. A further increase in the time-averaged yield up to above $$10^8\,{\mathrm{sr}}^{-1}\,{\mathrm{s}}^{-1}$$ 10 8 sr - 1 s - 1 is foreseen using double-layer targets.

Design and commissioning of a neutron counter adapted to high-intensity laser matter interactions

The advent of multi-PW laser facilities world-wide opens new opportunities for nuclear physics. With this perspective, we developed a neutron counter taking into account the specifics of a high-intensity laser environment. Using GEANT4 simulations and prototype testings, we report on the design of a modular neutron counter based on boron-10 enriched scintillators and a high-density polyethylene moderator. This detector has been calibrated using a plutonium-beryllium neutron source and commissioned during an actual neutron-producing laser experiment at the LULI2000 facility (France). An overall efficiency of 4.37(59)% has been demonstrated during calibration with a recovery time of a few hundred microseconds after laser-plasma interaction.

Combined laser-based X-ray fluorescence and particle-induced X-ray emission for versatile multi-element analysis

Particle and radiation sources are widely employed in manifold applications. In the last decades, the upcoming of versatile, energetic, high-brilliance laser-based sources, as produced by intense laser–matter interactions, has introduced utilization of these sources in diverse areas, given their potential to complement or even outperform existing techniques. In this paper, we show that the interaction of an intense laser with a solid target produces a versatile, non-destructive, fast analysis technique that allows to switch from laser-driven PIXE (Particle-Induced X-ray Emission) to laser-driven XRF (X-ray Fluorescence) within single laser shots, by simply changing the atomic number of the interaction target. The combination of both processes improves the retrieval of constituents in materials and allows for volumetric analysis up to tens of microns and on cm² large areas up to a detection threshold of ppms. This opens the route for a versatile, non-destructive, and fast combined analysis technique.

Ultra-Fast High-Precision Metallic Nanoparticle Synthesis using Laser-Accelerated Protons

Laser-driven proton acceleration, as produced during the interaction of a high-intensity (I > 1 × 1018 W/cm2), short pulse (<1 ps) laser with a solid target, is a prosperous field of endeavor for manifold applications in different domains, including astrophysics, biomedicine and materials science. These emerging applications benefit from the unique features of the laser-accelerated particles such as short duration, intense flux and energy versatility, which allow obtaining unprecedented temperature and pressure conditions. In this paper, we show that laser-driven protons are perfectly suited for producing, in a single sub-ns laser pulse, metallic nanocrystals with tunable diameter ranging from tens to hundreds of nm and very high precision. Our method relies on the intense and very quick proton energy deposition, which induces in a bulk material an explosive boiling and produces nanocrystals that aggregate in a plasma plume composed by atoms detached from the proton-irradiated surface. The properties of the obtained particles depend on the deposited proton energy and on the duration of the thermodynamical process. Suitably controlling the irradiated dose allows fabricating nanocrystals of a specific size with low polydispersity that can easily be isolated in order to obtain a monodisperse nanocrystal solution. Molecular Dynamics simulations confirm our experimental results.

Laser-accelerated particle beams for stress testing of materials

Laser-driven particle acceleration, obtained by irradiation of a solid target using an ultra-intense (I > 10¹⁸ W/cm²) short-pulse (duration <1 ps) laser, is a growing field of interest, in particular for its manifold potential applications in different domains. Here, we provide experimental evidence that laser-generated particles, in particular protons, can be used for stress testing materials and are particularly suited for identifying materials to be used in harsh conditions. We show that these laser-generated protons can produce, in a very short time scale, a strong mechanical and thermal damage, that, given the short irradiation time, does not allow for recovery of the material. We confirm this by analyzing changes in the mechanical, optical, electrical, and morphological properties of five materials of interest to be used in harsh conditions.

Recently, there has been significant progress on the application of laser-generated proton beams in material science. Here the authors demonstrate the benefit of employing such beams in stress testing different materials by examining their mechanical, optical, electrical, and morphological properties.

Laser-Generated Proton Beams for High-Precision Ultra-Fast Crystal Synthesis

We present a method for the synthesis of micro-crystals and micro-structured surfaces using laser-accelerated protons. In this method, a solid surface material having a low melting temperature is irradiated with very-short laser-generated protons, provoking in the ablation process thermodynamic conditions that are between the boiling and the critical point. The intense and very quick proton energy deposition (in the ns range) induces an explosive boiling and produces microcrystals that nucleate in a plasma plume composed by ions and atoms detached from the laser-irradiated surface. The synthesized particles in the plasma plume are then deposited onto a cold neighboring, non-irradiated, solid secondary surface. We experimentally verify the synthesizing methods by depositing low-melting-material microcrystals - such as gold - onto nearby silver surfaces and modeling the proton/matter interaction via a Monte Carlo code, confirming that we are in the above described thermodynamic conditions. Morphological and crystallinity measurements indicate the formation of gold octahedral crystals with dimensions around 1.2 μm, uniformly distributed onto a silver surface with dimensions in the tens of mm2. This laser-accelerated particle based synthesis method paves the way for the development of new material synthesis using ultrashort laser-accelerated particle beams.

Electron heating in subpicosecond laser interaction with overdense and near-critical plasmas

In this work we investigate electron heating induced by intense laser interaction with micrometric flat solid foils in the context of laser-driven ion acceleration. We propose a simple law to predict the electron temperature in a wider range of laser parameters with respect to commonly used existing models. An extensive two-dimensional (2D) and 3D numerical campaign shows that electron heating is due to the combined actions of j×B and Brunel effect. Electron temperature can be well described with a simple function of pulse intensity and angle of incidence, with parameters dependent on pulse polarization. We then combine our model for the electron temperature with an existing model for laser-ion acceleration, using recent experimental results as a benchmark. We also discuss an exploratory attempt to model electron temperature for multilayered foam-attached targets, which have been proven recently to be an attractive target concept for laser-driven ion acceleration.