Quasi-Phase-Matched Supercontinuum Generation in Photonic Waveguides

Spatially resolved multimode excitation for smooth supercontinuum generation in a SiN waveguide

We propose a method of supercontinuum light generation enhanced by multimode excitation in a precisely dispersion-engineered deuterated SiN (SiN:D) waveguide. Although a regularly designed SiN-based nonlinear optical waveguide exhibits anomalous dispersion with the fundamental and first-order multimode operation, the center-symmetric light pumping at the input edge has so far inhibited the full potential of the nonlinearity of SiN-based materials. On the basis of numerical analysis and simulation for the SiN:D waveguide, we intentionally applied spatial position offsets to excite the fundamental and higher-order modes to realize bandwidth broadening with flatness. Using this method, we achieved an SNR improvement of up to 18 dB at a wavelength of 0.6 µm with an offset of about 1 µm in the Y-axis direction and found that the contribution was related to the presence of dispersive waves due to the excitation of TE₁₀, and TE₀₁ modes.

Zero dispersion Kerr solitons in optical microresonators

Solitons are shape preserving waveforms that are ubiquitous across nonlinear dynamical systems from BEC to hydrodynamics, and fall into two separate classes: bright solitons existing in anomalous group velocity dispersion, and switching waves forming ‘dark solitons’ in normal dispersion. Bright solitons in particular have been relevant to chip-scale microresonator frequency combs, used in applications across communications, metrology, and spectroscopy. Both have been studied, yet the existence of a structure between this dichotomy has only been theoretically predicted. We report the observation of dissipative structures embodying a hybrid between switching waves and dissipative solitons, existing in the regime of vanishing group velocity dispersion where third-order dispersion is dominant, hence termed as ‘zero-dispersion solitons’. They are observed to arise from the interlocking of two modulated switching waves, forming a stable solitary structure consisting of a quantized number of peaks. The switching waves form directly via synchronous pulse-driving of a Si₃N₄ microresonator. The resulting comb spectrum spans 136 THz or 97% of an octave, further enhanced by higher-order dispersive wave formation. This dissipative structure expands the domain of Kerr cavity physics to the regime near to zero-dispersion and could present a superior alternative to conventional solitons for broadband comb generation.

Here, the authors find the missing link for soliton microcombs that exist at the boundary where the group velocity dispersion of light changes sign: zero-dispersion solitons. The resulting microresonator frequency comb, based in Si3N4, spans almost an octave.

Tailored Multi-Color Dispersive Wave Formation in Quasi-Phase-Matched Exposed Core Fibers

Widely wavelength-tunable femtosecond light sources in a compact, robust footprint play a central role in many prolific research fields and technologies, including medical diagnostics, biophotonics, and metrology. Fiber lasers are on the verge in the development of such sources, yet widespan spectral tunability of femtosecond pulses remains a pivotal challenge. Dispersive wave generation, also known as Cherenkov radiation, offers untapped potentials to serve these demands. In this work, the concept of quasi-phase matching for multi-order dispersive wave formation with record-high spectral fidelity and femtosecond durations is exploited in selected, partially conventionally unreachable spectral regions. Versatile patterned sputtering is utilized to realize height-modulated high-index nano-films on exposed fiber cores to alter fiber dispersion to an unprecedented degree through spatially localized, induced resonances. Nonlinear optical experiments and simulations, as well as phase-mismatching considerations based on an effective dispersion, confirm the conversion process and reveal unique emission features, such as almost power-independent wavelength stability and femtosecond duration. This resonance-empowered approach is applicable to both fiber and on-chip photonic systems and paves the way to instrumentalize dispersive wave generation as a unique tool for efficient, coherent femtosecond multi-frequency conversion for applications in areas such as bioanalytics, life science, quantum technology, or metrology.

Direct f-3f self-referencing using an integrated silicon-nitride waveguide

We have achieved the simultaneous generation of a 2.6-octave-wide supercontinuum (SC) spectrum over 400-2500 nm and third-harmonic light solely by a dispersion-controlled silicon-nitride waveguide (SiNW). To increase the visible intensity of the SC light component, we fabricated low-loss 5-mm-long deuterated SiNWs with spot-size converters by low-temperature deposition. We succeeded in measuring the carrier-envelope-offset (CEO) signal with a 34-dB signal-to-noise ratio because this short deuterated SiNW provides a large temporal overlap between the f and 3f components. In addition, we have demonstrated this method of CEO locking at telecommunications wavelengths with f-3f self-referencing generated solely by the SiNW without the use of highly nonlinear fiber and an additional nonlinear crystal. Compared with the method of CEO locking with a highly nonlinear fiber and a standard f-2f self-referencing interferometer, this method is not only simple and compact but also stable.

Towards integrated photonic interposers for processing octave-spanning microresonator frequency combs

Microcombs-optical frequency combs generated in microresonators-have advanced tremendously in the past decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs promise fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, the use of bulk free-space and fiber-optic components to process microcombs has restricted form factors to the table-top. Taking microcomb-based optical frequency synthesis around 1550 nm as our target application, here, we address this challenge by proposing an integrated photonics interposer architecture to replace discrete components by collecting, routing, and interfacing octave-wide microcomb-based optical signals between photonic chiplets and heterogeneously integrated devices. Experimentally, we confirm the requisite performance of the individual passive elements of the proposed interposer-octave-wide dichroics, multimode interferometers, and tunable ring filters, and implement the octave-spanning spectral filtering of a microcomb, central to the interposer, using silicon nitride photonics. Moreover, we show that the thick silicon nitride needed for bright dissipative Kerr soliton generation can be integrated with the comparatively thin silicon nitride interposer layer through octave-bandwidth adiabatic evanescent coupling, indicating a path towards future system-level consolidation. Finally, we numerically confirm the feasibility of operating the proposed interposer synthesizer as a fully assembled system. Our interposer architecture addresses the immediate need for on-chip microcomb processing to successfully miniaturize microcomb systems and can be readily adapted to other metrology-grade applications based on optical atomic clocks and high-precision navigation and spectroscopy.

Higher order mode supercontinuum generation in tantalum pentoxide (Ta2O5) channel waveguide

We fabricated tantalum pentoxide (Ta₂O₅) channel waveguides and used them to experimentally demonstrate higher-order mode supercontinuum (SC) generation. The Ta₂O₅ waveguide has a high nonlinear refractive index which was in an order magnitude of 10^-14 cm²/W and was designed to be anomalously dispersive at the pumping wavelength. To the best of our knowledge, this is the first time a higher-order mode femtosecond pump based broadband SC has been measured from a nonlinear waveguide using the phase-matching method. This enabled us to demonstrate a SC spectrum spanning from 842 to 1462 nm (at - 30 dB), which corresponds to 0.83 octaves, when using the TM₁₀ waveguide mode. When using the TE₁₀ mode, the SC bandwidth is slightly reduced for the same excitation peak power. In addition, we theoretically estimated and discussed the possibility of using the broadband higher-order modes emitted from the Ta₂O₅ waveguide for trapping nanoparticles. Hence, we believe that demonstrated Ta₂O₅ waveguide are a promising broadband light source for optical applications such as frequency metrology, Raman spectroscopy, molecular spectroscopy and optical coherence tomography.

Group-velocity-dispersion engineering of tantala integrated photonics

Designing integrated photonics, especially to leverage Kerr-nonlinear optics, requires accurate and precise knowledge of the refractive index across the visible to infrared spectral ranges. Tantala (Ta₂O₅) is an emerging material platform for integrated photonics and nanophotonics that offers broadband ultralow loss, moderately high nonlinearity, and advantages for scalable and heterogeneous integration. We present refractive index measurements on a thin film of tantala, and we explore the efficacy of this data for group-velocity-dispersion (GVD) engineering with waveguide and ring-resonator devices. In particular, the observed spectral extent of supercontinuum generation in fabricated waveguides and the wavelength dependence of free spectral range (FSR) in optical resonators provide a sensitive test of our integrated photonics design process. Our work opens up new design possibilities with tantala, including with octave-spanning soliton microcombs.

Heterogeneous photodiodes on silicon nitride waveguides

Heterogeneous integration through low-temperature die bonding is a promising technique to enable high-performance III-V photodetectors on the silicon nitride (Si₃N₄) photonic platform. Here we demonstrate InGaAs/InP modified uni-traveling carrier photodiodes on Si₃N₄ waveguides with 20 nA dark current, 20 GHz bandwidth, and record-high external (internal) responsivities of 0.8 A/W (0.94 A/W) and 0.33 A/W (0.83 A/W) at 1550 nm and 1064 nm, respectively. Open eye diagrams at 40 Gbit/s are demonstrated. Balanced photodiodes of this type reach 10 GHz bandwidth with over 40 dB common mode rejection ratio.

Emission of multiple resonant radiations by spatiotemporal oscillation of multimode dark pulses

In this paper, we illustrate how the periodically modulated nonlinear parameter induced by the spatial beam oscillation can be used to generate broadband resonant radiations, through a train of dark pulses in normally dispersive graded-index multimode fibers under the efficient quasi-phase-matching schemes. More precisely, we demonstrate that two co-propagating waves with equal intensities and certain temporal delays can induce the formation of a train of dark solitons, with each emitting multiple resonant radiation lines, which can possibly form multiple radiation continuums based on vast amount of excited dark solitons. The nonlinear-interaction-aided excitation of dark pulses and their radiations appear to occur through a deterministic pathway, in sharp contrast to the situation for bright pulses in the anomalous dispersion region. The quasi-phase-matching condition via periodic oscillation of spatial beam in the normal-dispersion regime adds a unique dimension to the physical design of multimode waveguides, allowing the spectrum to be engineered for specific applications.

Beyond 100 THz-spanning ultraviolet frequency combs in a non-centrosymmetric crystalline waveguide

Ultraviolet frequency combs enable applications ranging from precision spectroscopy to atomic clocks by addressing electronic transitions of atoms and molecules. Access to ultraviolet light via integrated nonlinear optics is usually hampered by the strong material dispersion and large waveguide attention in ultraviolet regions. Here we demonstrate a simple route to chip-scale ultraviolet comb generators, simultaneously showing a gap-free frequency span of 128 terahertz and high conversion efficiency. This process relies on adiabatic quadratic frequency translation of a near-visible supercontinuum sourced by an ultrafast fiber laser. The simultaneous cubic and quadratic nonlinear processes are implemented in single-crystalline aluminum nitride thin films, where chirp-modulated taper waveguides are patterned to ensure a broad phase matching. The heterodyne characterization suggests that both the near-visible and ultraviolet supercontinuum combs maintain high coherence. Our approach is also adaptable to other non-centrosymmetric photonic platforms for ultrafast nonlinear optics with scalable bandwidth.

Cascaded DFG via quasi-phase matching with Cherenkov-type PPLN for highly efficient terahertz generation

Terahertz (THz) generation in a periodically poled lithium niobate crystal via cascaded difference-frequency generation based on Cherenkov-type quasi-phase matching (QPM) is proposed. Photon conversion efficiency is evaluated based on a promising structure that combines QPM and Cherenkov phase-matching with reduced wave-vector mismatch. Cascading processes contribute to photon conversion efficiency, and THz radiation with maximum photon conversion efficiency of 1154.2% in a 14-order cascaded Stokes process was obtained. Comparing the processes with and without Cherenkov-type radiation, with a 50-MW pump, power was boosted nearly 1.9 times for the former case. These results provide an experimental approach to high-energy THz-wave generation.

Modelling spontaneous four-wave mixing in periodically tapered waveguides

A periodically tapered waveguides technique is an emerging potential route to establish quasi-phase-matching schemes in third-order nonlinear materials for efficient on-demand parametric interactions. In this paper, I investigate this method in enhancing spontaneous photon-pair emission in microstructured fibres and planar waveguides with sinusoidally varying cross sections. To study this process for continuous and pulsed-pump excitations, I have developed a general robust quantum model that takes into account self- and cross-phase modulations. The model shows a great enhancement in photon-pair generation in waveguides with a small number of tapering periods that are feasible via the current fabrication technologies. I envisage that this work will open a new area of research to investigate how the tapering patterns can be fully optimised to tailor the spectral properties of the output photons in nonlinear guided structures.

Tunable mid-infrared generation via wide-band four-wave mixing in silicon nitride waveguides

We demonstrate wide-band frequency down-conversion to the mid-infrared (MIR) using four-wave mixing (FWM) of near-infrared (NIR) femtosecond-duration pulses from an Er:fiber laser, corresponding to 100 THz spectral translation. Photonic-chip-based silicon nitride waveguides provide the FWM medium. Engineered dispersion in the nanophotonic geometry and the wide transparency range of silicon nitride enable large-detuning FWM phase-matching and results in tunable MIR from 2.6 to 3.6 μm on a single chip with 100-pJ-scale pump-pulse energies. Additionally, we observe up to 25 dB broadband parametric gain for NIR pulses when the FWM process is operated in a frequency up-conversion configuration. Our results demonstrate how integrated photonic circuits pumped with fiber lasers could realize multiple nonlinear optical phenomena on the same chip and lead to engineered synthesis of broadband, tunable, and coherent light across the NIR and MIR wavelength bands.