Demonstration of Protection of a Superconducting Qubit from Energy Decay

Optimizing quantum gates towards the scale of logical qubits

A foundational assumption of quantum error correction theory is that quantum gates can be scaled to large processors without exceeding the error-threshold for fault tolerance. Two major challenges that could become fundamental roadblocks are manufacturing high-performance quantum hardware and engineering a control system that can reach its performance limits. The control challenge of scaling quantum gates from small to large processors without degrading performance often maps to non-convex, high-constraint, and time-dynamic control optimization over an exponentially expanding configuration space. Here we report on a control optimization strategy that can scalably overcome the complexity of such problems. We demonstrate it by choreographing the frequency trajectories of 68 frequency-tunable superconducting qubits to execute single- and two-qubit gates while mitigating computational errors. When combined with a comprehensive model of physical errors across our processor, the strategy suppresses physical error rates by ~3.7× compared with the case of no optimization. Furthermore, it is projected to achieve a similar performance advantage on a distance-23 surface code logical qubit with 1057 physical qubits. Our control optimization strategy solves a generic scaling challenge in a way that can be adapted to a variety of quantum operations, algorithms, and computing architectures.

Native Approach to Controlled-Z Gates in Inductively Coupled Fluxonium Qubits

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX interactions. Consequently, effective ZZ or XZ interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-z gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

Quantum computer-aided design for advanced superconducting qubit: Plasmonium

Complex quantum electronic circuits can be used to design noise-protected qubits, but their complexity may exceed the capabilities of classical simulation. In such cases, quantum computers are necessary for efficient simulation. In this work, we demonstrate the use of variational quantum computing on a transmon-based quantum processor to simulate a superconducting quantum electronic circuit and design a new type of qubit called "Plasmonium", which operates in the plasmon-transition regime. The fabricated Plasmonium qubits show a high two-qubit gate fidelity of 99.58(3)%, as well as a smaller physical size and larger anharmonicity compared to transmon qubits. These properties make Plasmonium a promising candidate for scaling up multi-qubit devices. Our results demonstrate the potential of using quantum computers to aid in the design of advanced quantum processors.

Inductively shunted transmons exhibit noise insensitive plasmon states and a fluxon decay exceeding 3 hours

Currently available quantum processors are dominated by noise, which severely limits their applicability and motivates the search for new physical qubit encodings. In this work, we introduce the inductively shunted transmon, a weakly flux-tunable superconducting qubit that offers charge offset protection for all levels and a 20-fold reduction in flux dispersion compared to the state-of-the-art resulting in a constant coherence over a full flux quantum. The parabolic confinement provided by the inductive shunt as well as the linearity of the geometric superinductor facilitates a high-power readout that resolves quantum jumps with a fidelity and QND-ness of >90% and without the need for a Josephson parametric amplifier. Moreover, the device reveals quantum tunneling physics between the two prepared fluxon ground states with a measured average decay time of up to 3.5 h. In the future, fast time-domain control of the transition matrix elements could offer a new path forward to also achieve full qubit control in the decay-protected fluxon basis.

Millisecond Coherence in a Superconducting Qubit

Improving control over physical qubits is a crucial component of quantum computing research. Here we report a superconducting fluxonium qubit with uncorrected coherence time T_{2}^{*}=1.48±0.13  ms, exceeding the state of the art for transmons by an order of magnitude. The average gate fidelity was benchmarked at 0.99991(1). Notably, even in the millisecond range, the coherence time is limited by material absorption and could be further improved with a more rigorous fabrication. Our demonstration may be useful for suppressing errors in the next generation quantum processors.

Effects of Dipole-Dipole Interaction and Time-Dependent Coupling on the Evolution of Entanglement and Quantum Coherence for Superconducting Qubits in a Nonlinear Field System

We examine the temporal comportment of formation entanglement and quantum coherence in a quantum system made up of two superconducting charge qubits (SC-Qs), in the case of two different classes of nonlinear field. The results discussed the impact role of time-dependent coupling (T-DC) and dipole-dipole interaction (D-DI) on the temporal comportment of quantum coherence and entanglement in the ordinary and nonlinear field. In addition, we show that the main parameters of the quantum model affect the entanglement of formation and the coherence of the system in a similar way.

Intrinsic Photon Loss at the Interface of Superconducting Devices

We present a quantum theory of dielectric energy loss arising from the piezoelectric coupling between photons and phonons in superconducting devices. Photon loss is shown to occur predominantly at the interface, where the piezoelectric effect is nonzero even when the materials are perfectly crystalline (epitaxial) and free of two-level system defects. We present explicit numerical calculations for the value of the intrinsic loss tangent at several interfaces to conclude that the T_{1} of superconducting qubits may reach over 10^{4}  μs if the device is made with defect-free interfaces.

Parity-Protected Superconductor-Semiconductor Qubit

Coherence of superconducting qubits can be improved by implementing designs that protect the parity of Cooper pairs on superconducting islands. Here, we introduce a parity-protected qubit based on voltage-controlled semiconductor nanowire Josephson junctions, taking advantage of the higher harmonic content in the energy-phase relation of few-channel junctions. A symmetric interferometer formed by two such junctions, gate-tuned into balance and frustrated by a half-quantum of applied flux, yields a cos(2φ) Josephson element, reflecting coherent transport of pairs of Cooper pairs. We demonstrate that relaxation of the qubit can be suppressed tenfold by tuning into the protected regime.

Non-Gaussian noise spectroscopy with a superconducting qubit sensor

Accurate characterization of the noise influencing a quantum system of interest has far-reaching implications across quantum science, ranging from microscopic modeling of decoherence dynamics to noise-optimized quantum control. While the assumption that noise obeys Gaussian statistics is commonly employed, noise is generically non-Gaussian in nature. In particular, the Gaussian approximation breaks down whenever a qubit is strongly coupled to discrete noise sources or has a non-linear response to the environmental degrees of freedom. Thus, in order to both scrutinize the applicability of the Gaussian assumption and capture distinctive non-Gaussian signatures, a tool for characterizing non-Gaussian noise is essential. Here, we experimentally validate a quantum control protocol which, in addition to the spectrum, reconstructs the leading higher-order spectrum of engineered non-Gaussian dephasing noise using a superconducting qubit as a sensor. This first experimental demonstration of non-Gaussian noise spectroscopy represents a major step toward demonstrating a complete spectral estimation toolbox for quantum devices.

Granular aluminium as a superconducting material for high-impedance quantum circuits

Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, about 100 Ω, and small anharmonicity, which can limit their coherence and logic gate fidelity^1,2. A promising alternative is circuits based on so-called superinductors^3-6, with characteristic impedances exceeding the resistance quantum R_Q = 6.4 kΩ. However, previous implementations of superinductors, consisting of mesoscopic Josephson junction arrays^7,8, can introduce unintended nonlinearity or parasitic resonant modes in the qubit vicinity, degrading its coherence. Here, we present a fluxonium qubit design based on a granular aluminium superinductor strip^9-11. We show that granular aluminium can form an effective junction array with high kinetic inductance and be in situ integrated with standard aluminium circuit processing. The measured qubit coherence time [Formula: see text] illustrates the potential of granular aluminium for applications ranging from protected qubit designs to quantum-limited amplifiers and detectors.

Experimental Realization of Nonadiabatic Shortcut to Non-Abelian Geometric Gates

When a quantum system is driven slowly through a parametric cycle in a degenerate Hilbert space, the state would acquire a non-Abelian geometric phase, which is stable and forms the foundation for holonomic quantum computation (HQC). However, in the adiabatic limit, the environmental decoherence becomes a significant source of errors. Recently, various nonadiabatic holonomic quantum computation (NHQC) schemes have been proposed, but all at the price of increased sensitivity to control errors. Alternatively, there exist theoretical proposals for speeding up HQC by the technique of "shortcut to adiabaticity" (STA), but no experimental demonstration has been reported so far, as these proposals involve a complicated control of four energy levels simultaneously. Here, we propose and experimentally demonstrate that HQC via shortcut to adiabaticity can be constructed with only three energy levels, using a superconducting qubit in a scalable architecture. With this scheme, all holonomic single-qubit operations can be realized nonadiabatically through a single cycle of state evolution. As a result, we are able to experimentally benchmark the stability of STA+HQC against NHQC in the same platform. The flexibility and simplicity of our scheme makes it also implementable on other systems, such as nitrogen-vacancy center, quantum dots, and nuclear magnetic resonance. Finally, our scheme can be extended to construct two-qubit holonomic entangling gates, leading to a universal set of STAHQC gates.

Nanowire Superinductance Fluxonium Qubit

We characterize a fluxonium qubit consisting of a Josephson junction inductively shunted with a NbTiN nanowire superinductance. We explain the measured energy spectrum by means of a multimode theory accounting for the distributed nature of the superinductance and the effect of the circuit nonlinearity to all orders in the Josephson potential. Using multiphoton Raman spectroscopy, we address multiple fluxonium transitions, observe multilevel Autler-Townes splitting and measure an excited state lifetime of T_{1}=20  μs. By measuring T_{1} at different magnetic flux values, we find a crossover in the lifetime limiting mechanism from capacitive to inductive losses.

Loss Mechanisms and Quasiparticle Dynamics in Superconducting Microwave Resonators Made of Thin-Film Granular Aluminum

Superconducting high kinetic inductance elements constitute a valuable resource for quantum circuit design and millimeter-wave detection. Granular aluminum (grAl) in the superconducting regime is a particularly interesting material since it has already shown a kinetic inductance in the range of nH/□ and its deposition is compatible with conventional Al/AlOx/Al Josephson junction fabrication. We characterize microwave resonators fabricated from grAl with a room temperature resistivity of 4×10^{3}  μΩ cm, which is a factor of 3 below the superconductor to insulator transition, showing a kinetic inductance fraction close to unity. The measured internal quality factors are on the order of Q_{i}=10^{5} in the single photon regime, and we demonstrate that nonequilibrium quasiparticles (QPs) constitute the dominant loss mechanism. We extract QP relaxation times in the range of 1 s and we observe QP bursts every ∼20  s. The current level of coherence of grAl resonators makes them attractive for integration in quantum devices, while it also evidences the need to reduce the density of nonequilibrium QPs.

Realization of a Λ System with Metastable States of a Capacitively Shunted Fluxonium

We realize a Λ system in a superconducting circuit, with metastable states exhibiting lifetimes up to 8 ms. We exponentially suppress the tunneling matrix elements involved in spontaneous energy relaxation by creating a "heavy" fluxonium, realized by adding a capacitive shunt to the original circuit design. The device allows for both cavity-assisted and direct fluorescent readouts, as well as state preparation schemes akin to optical pumping. Since direct transitions between the metastable states are strongly suppressed, we utilize Raman transitions for coherent manipulation of the states.