Quantum Measurement Cooling

Dynamic phases of synthetic bath at negative temperatures

Quantum thermal devices are typically designed to perform work beyond classical ability, with their potential to utilize quantum coherence as a resource. Here, we investigate that an energy-carrying molecular model for donor and acceptor coupling to two physical baths and an external driving field offers diverse functions transformed among heat engine, refrigerator, and thermal accelerator. The counter-rotating component of the driving field can induce behavior where the heat flows from the cold bath to the hot one and an output work is done. It is, thus, evident that the precise modulation of the synthetic bath whose inverse temperature varies continuously from negative to positive enables all modes of energy transfer in the phase diagram. The non-equilibrium quantum thermodynamics for realistic devices is further investigated when the external driving field is switched on and off periodically.

Impact of the sequence of system-environment interactions on the functionality and efficiency of quantum thermal machines

In this work, we investigate effects of the sequence of system-environment interactions on the functionality and performance of quantum thermal machines (QTMs). The working substance of our setup consists of two subsystems, each independently coupled to its local thermal reservoir and further interconnected with a common reservoir in a cascaded manner. We demonstrate the impact of the sequential interactions between the subsystems and the common reservoir by exchanging the temperatures of the two local reservoirs. Our findings reveal that, when the two subsystems are in resonance, such an exchange alters the efficiency of QTMs without changing their functional types. Conversely, when the two subsystems are detuned, this exchange not only changes the efficiency but also the types of QTMs. Our results indicate that the manners of system-reservoir interactions offer significant potential for designing QTMs with tailored functionalities and enhanced performance.

Continuous feedback protocols for cooling and trapping a quantum harmonic oscillator

Quantum technologies and experiments often require preparing systems in low-temperature states. Here we investigate cooling schemes using feedback protocols modeled with a quantum Fokker-Planck master equation (QFPME) recently derived by Annby-Andersson et al. [Phys. Rev. Lett. 129, 050401 (2022)0031-900710.1103/PhysRevLett.129.050401]. This equation describes systems under continuous weak measurements, with feedback based on the outcome of these measurements. We apply this formalism to study the cooling and trapping of a harmonic oscillator for several protocols based on position and/or momentum measurements. We find that the protocols can cool the oscillator down to, or close to, the ground state for suitable choices of parameters. Our analysis provides an analytically solvable case study of quantum measurement and feedback and illustrates the application of the QFPME to continuous quantum systems.

Finite-time measurement-driven Otto cycle

A novel quantum Otto heat engine that operates within a finite-time framework by incorporating measurement procedures is proposed. Departing from conventional quantum Otto heat engines, our model replaces the heat absorption process from a high-temperature source with invasive measurement. Moreover, we consider finite-time thermodynamic manipulation in each step. Our model focuses on exploring the effects of the angles of the measurement basis on the Bloch sphere and the timings of time-dependent evolutions on thermodynamic properties, with a specific emphasis on the trade-off between the power output and the efficiency. Our findings demonstrate that by carefully selecting specific parameters, the efficiency and overall performance of this heat engine can be significantly enhanced.

Work extraction from quantum coherence in non-equilibrium environment

Ergotropy, which represents the maximum amount of work that can be extracted from a quantum system, has become a focal point of interest in the fields of quantum thermodynamics and information processing. In practical scenarios, the interaction of quantum systems with their surrounding environment is unavoidable. Recent studies have increasingly focused on analyzing open quantum systems affected by non-stationary environmental fluctuations due to their significant impact on various physical scenarios. While much research has concentrated on work extraction from these systems, it often assumes that the environmental degrees of freedom are substantial and that the environment is effectively in equilibrium. This has led us to explore work extraction from quantum systems under non-stationary environmental conditions. In this work, the dynamics of ergotropy will be investigated in a non-equilibrium environment for both Markovian and non-Markovian regime. In this study, both the coherent and incoherent parts of the ergotropy will be considered. It will be shown that for a non-equilibrium environment, the extraction of work is more efficient compared to when the environment is in equilibrium.

Catalytic enhancement in the performance of the microscopic two-stroke heat engine

We consider a model of heat engine operating in the microscopic regime: the two-stroke engine. It produces work and exchanges heat in two discrete strokes that are separated in time. The working body of the engine consists of two d-level systems initialized in thermal states at two distinct temperatures. Additionally, an auxiliary nonequilibrium system called catalyst may be incorporated with the working body of the engine, provided the state of the catalyst remains unchanged after the completion of a thermodynamic cycle. This ensures that the work produced by the engine arises solely from the temperature difference. Upon establishing the rigorous thermodynamic framework, we characterize twofold improvement stemming from the inclusion of a catalyst. Firstly, we prove that in the noncatalytic scenario, the optimal efficiency of the two-stroke heat engine with a working body composed of two-level systems is given by the Otto efficiency, which can be surpassed by incorporating a catalyst with the working body. Secondly, we show that incorporating a catalyst allows the engine to operate in frequency and temperature regimes that are not accessible for noncatalytic two-stroke engines. We conclude with a general conjecture about the advantage brought by a catalyst: including the catalyst with the working body always allows to improve efficiency over the noncatalytic scenario for any microscopic two-stroke heat engines. We prove this conjecture for two-stroke engines where the working body is composed of two d-level systems initialized in thermal states at two distinct temperatures, as long as the final joint state leading to optimal efficiency in the noncatalytic scenario is not a product state, or at least one of the d-level system is not thermal.

Experimental Realization of Self-Contained Quantum Refrigeration

A fundamental challenge in quantum thermodynamics is the exploration of inherent dimensional constraints in thermodynamic machines. In the context of two-level systems, the most compact refrigerator necessitates the involvement of three entities, operating under self-contained conditions that preclude the use of external work sources. Here, we build such a smallest refrigerator using a nuclear spin system, where three distinct two-level carbon-13 nuclei in the same molecule are involved to facilitate the refrigeration process. The self-contained feature enables it to operate without relying on net external work, and the unique mechanism sets this refrigerator apart from its classical counterparts. We evaluate its performance under varying conditions and systematically scrutinize the cooling constraints across a spectrum of scenarios, which sheds light on the interplay between quantum information and thermodynamics.

Quantum Carnot thermal machines reexamined: Definition of efficiency and the effects of strong coupling

Whether the strong coupling to thermal baths can improve the performance of quantum thermal machines remains an open issue under active debate. Here we revisit quantum thermal machines operating with the quasistatic Carnot cycle and aim to unveil the role of strong coupling in maximum efficiency. Our analysis builds upon definitions of excess work and heat derived from an exact formulation of the first law of thermodynamics for the working substance, which captures the non-Gibbsian thermal equilibrium state that emerges at strong couplings during quasistatic isothermal processes. These excess definitions differ from conventional ones by an energetic cost for maintaining the non-Gibbsian characteristics. With this distinction, we point out that one can introduce two different yet thermodynamically allowed definitions for efficiency of both the heat engine and refrigerator modes. We dub them excess and hybrid definitions, which differ in the way of defining the gain for the thermal machines at strong couplings by either just analyzing the energetics of the working substance or instead evaluating the performance from an external system upon which the thermal machine acts, respectively. We analytically demonstrate that the excess definition predicts that the Carnot limit remains the upper bound for both operation modes at strong couplings, whereas the hybrid one reveals that strong coupling can suppress the maximum efficiency rendering the Carnot limit unattainable. These seemingly incompatible predictions thus indicate that it is imperative to first gauge the definition for efficiency before elucidating the exact role of strong coupling, thereby shedding light on the ongoing investigation on strong-coupling quantum thermal machines.

Anisotropy-assisted thermodynamic advantage of a local-spin quantum thermal machine

We study quantum Otto thermal machines with a two-spin working system coupled by anisotropic interaction. Depending on the choice of different parameters, the quantum Otto cycle can function as different thermal machines, including a heat engine, refrigerator, accelerator, and heater. We aim to investigate how the anisotropy plays a fundamental role in the performance of the quantum Otto engine (QOE) operating in different timescales. We find that while the engine's efficiency increases with the increase in anisotropy for the quasistatic operation, quantum internal friction and incomplete thermalization degrade the performance in a finite-time cycle. Further, we study the quantum heat engine (QHE) with one of the spins (local spin) as the working system. We show that the efficiency of such an engine can surpass the standard quantum Otto limit, along with maximum power, thanks to the anisotropy. This can be attributed to quantum interference effects. We demonstrate that the enhanced performance of a local-spin QHE originates from the same interference effects, as in a measurement-based QOE for their finite-time operation.

Transport and Nonreciprocity in Monitored Quantum Devices: An Exact Study

We study noninteracting fermionic systems undergoing continuous monitoring and driven by biased reservoirs. Averaging over the measurement outcomes, we derive exact formulas for the particle and heat flows in the system. We show that these currents feature competing elastic and inelastic components, which depend nontrivially on the monitoring strength γ. We highlight that monitor-induced inelastic processes lead to nonreciprocal currents, allowing one to extract work from measurements without active feedback control. We illustrate our formalism with two distinct monitoring schemes providing measurement-induced power or cooling. Optimal performances are found for values of the monitoring strength γ, which are hard to address with perturbative approaches.

Monitored nonadiabatic and coherent-controlled quantum unital Otto heat engines: First four cumulants

Recently, measurement-based quantum thermal machines have drawn more attention in the field of quantum thermodynamics. However, the previous results on quantum Otto heat engines were either limited to special unital and nonunital channels in the bath stages, or a specific driving protocol at the work strokes and assuming the cycle being time-reversal symmetric, i.e., V^{†}=U (or V=U). In this paper, we consider a single spin-1/2 quantum Otto heat engine, by first replacing one of the heat baths by an arbitrary unital channel, and then we give the exact analytical expression of the characteristic function from which all the cumulants of heat and work emerge. We prove that under the effect of monitoring, ν_{2}>ν_{1} is a necessary condition for positive work, either for a symmetric or asymmetric-driven Otto cycle. Furthermore, going beyond the average we show that the ratio of the fluctuations of work and heat is lower and upper-bounded when the system is working as a heat engine. However, differently from the previous results in the literature, we consider the third and fourth cumulants as well. It is shown that the ratio of the third (fourth) cumulants of work and heat is not upper-bounded by unity nor lower-bounded by the third (fourth) power of the efficiency, as is the case for the ratio of fluctuations. Finally, we consider applying a specific unital map that plays the role of a heat bath in a coherently superposed manner, and we show the role of the initial coherence of the control qubit on efficiency, on the average work and its relative fluctuations.

Quantum ergotropy and quantum feedback control

We study the energy extraction from and charging to a finite-dimensional quantum system by general quantum operations. We prove that the changes in energy induced by unital quantum operations are limited by the ergotropy and charging bounds for unitary quantum operations. This implies that, in order to break the ergotropy bound for unitary quantum operations, one needs to perform a quantum operation with feedback control. We also show that the ergotropy bound for unital quantum operations, applied to initial thermal equilibrium states, is tighter than the inequality representing the standard second law of thermodynamics without feedback control.

Quantum Otto cycle under strong coupling

Quantum heat engines are often discussed under the weak-coupling assumption that the interaction between the system and the reservoirs is negligible. Although this setup is easier to analyze, this assumption cannot be justified on the quantum scale. In this study, a quantum Otto cycle model that can be generally applied without the weak-coupling assumption is proposed. We replace the thermalization process in the weak-coupling model with a process comprising thermalization and decoupling. The efficiency of the proposed model is analytically calculated and indicates that, when the contribution of the interaction terms is neglected in the weak-interaction limit, it reduces to that of the earlier model. The sufficient condition for the efficiency of the proposed model not to surpass that of the weak-coupling model is that the decoupling processes of our model have a positive cost. Moreover, the relation between the interaction strength and the efficiency of the proposed model is numerically examined by using a simple two-level system. Furthermore, we show that our model's efficiency can surpass that of the weak-coupling model under particular cases. From analyzing the majorization relation, we also find a design method of the optimal interaction Hamiltonians, which are expected to provide the maximum efficiency of the proposed model. Under these interaction Hamiltonians, the numerical experiment shows that the proposed model achieves higher efficiency than that of its weak-coupling counterpart.

Hybrid quantum thermal machines with dynamical couplings

Quantum thermal machines can perform useful tasks, such as delivering power, cooling, or heating. In this work, we consider hybrid thermal machines, that can execute more than one task simultaneously. We characterize and find optimal working conditions for a three-terminal quantum thermal machine, where the working medium is a quantum harmonic oscillator, coupled to three heat baths, with two of the couplings driven periodically in time. We show that it is possible to operate the thermal machine efficiently, in both pure and hybrid modes, and to switch between different operational modes simply by changing the driving frequency. Moreover, the proposed setup can also be used as a high-performance transistor, in terms of output-to-input signal and differential gain. Owing to its versatility and tunability, our model may be of interest for engineering thermodynamic tasks and for thermal management in quantum technologies.

Thermoelectric Rectification and Amplification in Interacting Quantum-Dot Circuit-Quantum-Electrodynamics Systems

Thermoelectric rectification and amplification were investigated in an interacting quantum-dot circuit-quantum-electrodynamics system. By applying the Keldysh nonequilibrium Green's function approach, we studied the elastic (energy-conserving) and inelastic (energy-nonconserving) transport through a cavity-coupled quantum dot under the voltage biases in a wide spectrum of electron-electron and electron-photon interactions. While significant charge and Peltier rectification effects were found for strong light-matter interactions, the dependence on electron-electron interaction could be nonmonotonic and dramatic. Electron-electron interaction-enhanced transport was found under certain resonance conditions. These nontrivial interaction effects were found in both linear and nonlinear transport regimes, which manifested in charge and thermal currents, rectification effects, and the linear thermal transistor effect.

Energy dynamics, heat production and heat-work conversion with qubits: toward the development of quantum machines

We present an overview of recent advances in the study of energy dynamics and mechanisms for energy conversion in qubit systems with special focus on realizations in superconducting quantum circuits. We briefly introduce the relevant theoretical framework to analyze heat generation, energy transport and energy conversion in these systems with and without time-dependent driving considering the effect of equilibrium and non-equilibrium environments. We analyze specific problems and mechanisms under current investigation in the context of qubit systems. These include the problem of energy dissipation and possible routes for its control, energy pumping between driving sources and heat pumping between reservoirs, implementation of thermal machines and mechanisms for energy storage. We highlight the underlying fundamental phenomena related to geometrical and topological properties, as well as many-body correlations. We also present an overview of recent experimental activity in this field.

Measurement-Based Quantum Thermal Machines with Feedback Control

We investigated coupled-qubit-based thermal machines powered by quantum measurements and feedback. We considered two different versions of the machine: (1) a quantum Maxwell's demon, where the coupled-qubit system is connected to a detachable single shared bath, and (2) a measurement-assisted refrigerator, where the coupled-qubit system is in contact with a hot and cold bath. In the quantum Maxwell's demon case, we discuss both discrete and continuous measurements. We found that the power output from a single qubit-based device can be improved by coupling it to the second qubit. We further found that the simultaneous measurement of both qubits can produce higher net heat extraction compared to two setups operated in parallel where only single-qubit measurements are performed. In the refrigerator case, we used continuous measurement and unitary operations to power the coupled-qubit-based refrigerator. We found that the cooling power of a refrigerator operated with swap operations can be enhanced by performing suitable measurements.

Energetics of a Single Qubit Gate

Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qubit becomes entangled with the microwave drive pulse so that there is a quantum superposition between energy flows. We measure the energy change in the drive field conditioned on the outcome of a projective qubit measurement. We demonstrate that the drive's energy change associated with the measurement backaction can exceed by far the energy that can be extracted by the qubit. This can be understood by considering the qubit as a weak measurement apparatus of the driving field.

Heat engines with single-shot deterministic work extraction

We introduce heat engines working in the nanoregime that allow one to extract a finite amount of deterministic work. Using the resource theory approach to themodynamics, we show that the efficiency of these cycles is strictly smaller than Carnot's, and we associate this difference with a fundamental irreversibility that is present in single-shot transformations. When fluctuations in the extracted work are allowed there is a trade-off between their size and the efficiency. As the size of fluctuations increases so does the efficiency and optimal efficiency is attained for unbounded fluctuations, while a certain amount of deterministic work is drawn from the cycle. Finally, we show that when the working medium is composed of many particles, by creating an amount of correlations between the subsystems that scale logarithmically with their number, Carnot's efficiency can also be approached in the asymptotic limit along with deterministic work extraction.

Necessity of feedback control for the quantum Maxwell demon in a finite-time steady feedback cycle

We revisit quantum Maxwell demon in thermodynamic feedback cycle in the steady-state regime. We derive a generalized version of the Clausius inequality for a finite-time steady feedback cycle with a single heat bath. It is shown to be tighter than previously known ones, and allows us to clarify that feedback control is necessary to violate the standard Clausius inequality.

Preparation of quantum correlations assisted by a steering Maxwell demon

A Maxwell demon can reduce the entropy of a quantum system by performing measurements on its environment. The nonsignaling theorem prevents the demon from affecting the average state of the system. We study the preparations of quantum correlations from a system qubit and an auxiliary qubit, assisted by a demon who obtains information of the system qubit from measurements on its environment. The demon can affect the postmeasured states of system by choosing different measurements, which establishes the relationships between quantum steering and other correlations in the thermodynamic framework. We present the optimal protocols for creating mutual information, entanglement, and Bell-nonlocality. These maximal correlations are found to relate exactly to the steerable boundary of the system-environment state with maximally mixed marginals. We also present upper bounds of the prepared correlations by utilizing classical environment-system correlation, which can be regarded as steering-type inequalities bounding the correlations created with the aid of classical demons.

Nonadiabatic coupled-qubit Otto cycle with bidirectional operation and efficiency gains

We study a quantum Otto cycle that uses a 2-qubit working substance whose Hamiltonian does not commute with itself at different times during unitary strokes. We investigate how the cycle responds to the loss of quantum adiabaticity when these strokes are operated with a finite duration. We find that qualitative features such as the possibility of counter-rotating cycles operating as heat engines, or a cycle efficiency that can increase with a decrease in the temperature difference between the baths, are resilient even to highly nonadiabatic strokes. However, cycle efficiency rapidly decreases, although it can still remain above the standard Otto value for small degrees of quantum nonadiabaticity.

Efficiently fueling a quantum engine with incompatible measurements

We propose a quantum harmonic oscillator measurement engine fueled by simultaneous quantum measurements of the noncommuting position and momentum quadratures of the quantum oscillator. The engine extracts work by moving the harmonic trap suddenly, conditioned on the measurement outcomes. We present two protocols for work extraction, respectively based on single-shot and time-continuous quantum measurements. In the single-shot limit, the oscillator is measured in a coherent state basis; the measurement adds an average of one quantum of energy to the oscillator, which is then extracted in the feedback step. In the time-continuous limit, continuous weak quantum measurements of both position and momentum of the quantum oscillator result in a coherent state, whose coordinates diffuse in time. We relate the extractable work to the noise added by quadrature measurements, and present exact results for the work distribution at arbitrary finite time. Both protocols can achieve unit work conversion efficiency in principle.

Strong system-bath coupling effects in quantum absorption refrigerators

We study the performance of three-level quantum absorption refrigerators, paradigmatic autonomous quantum thermal machines, and reveal central impacts of strong couplings between the working system and the thermal baths. Using the reaction coordinate quantum master equation method, which treats system-bath interactions beyond weak coupling, we demonstrate that in a broad range of parameters the cooling window at strong coupling can be captured by a weak-coupling theory, albeit with parameters renormalized by the system-bath coupling energy. As a result, at strong system-bath couplings the window of cooling is significantly reshaped compared to predictions of weak-coupling treatments. We further show that strong coupling admits direct transport pathways between the thermal reservoirs. Such beyond-second-order transport mechanisms are typically detrimental to the performance of quantum thermal machines. Our study reveals that it is inadequate to claim for either a suppression or an enhancement of the cooling performance as one increases system-bath coupling-when analyzed against a single parameter and in a limited domain. Rather, a comprehensive approach should be adopted so as to uncover the reshaping of the operational window.

Measurement-based quantum heat engine in a multilevel system

We compare quantum Otto engines based on two different cycle models: a two-bath model, with a standard heat source and sink, and a measurement-based protocol, where the role of heat source is played by a quantum measurement. We furthermore study these cycles using two different "working substances": a single qutrit (spin-1 particle) or a pair of qubits (spin-1/2 particles) interacting via the XXZ Heisenberg interaction. Although both cycle models have the same efficiency when applied on a single-qubit working substance, we find that both can reach higher efficiencies using these more complex working substances by exploiting the existence of "idle" levels, i.e., levels that do not shift while the spins are subjected to a variable magnetic field. Furthermore, with an appropriate choice of measurement, the measurement-based protocol becomes more efficient than the two-bath model.

Efficiency gain and bidirectional operation of quantum engines with decoupled internal levels

We present a mechanism for efficiency increase in quantum heat engines containing internal energy levels that do not couple to the external work sink. The gain is achieved by using these levels to channel heat in a direction opposite to the one dictated by the second law. No quantum coherence, quantum correlations or ergotropy are required. A similar mechanism allows the engine to run "in reverse" and still produce useful work. We illustrate these ideas using a simple quantum Otto cycle in a coupled-spin system. We find this engine also exhibits other counterintuitive phenomenology. For example, its efficiency may increase as the temperature difference between the heat baths decreases. Conversely, it may cease to operate if the hotter bath becomes too hot or the colder bath too cold.

Thermodynamic performance of a periodically driven harmonic oscillator correlated with the baths

We consider a harmonic oscillator under periodic driving and coupled to two harmonic-oscillator heat baths at different temperatures. We use the thermofield transformation with chain mapping for this setup, which allows us to study the unitary evolution of the system and the baths up to a time when the periodic steady state emerges in the system. We characterize this periodic steady state, and we show that, by tuning the system and the bath parameters, one can turn this system from an engine to an accelerator or even to a heater. The possibility to study the unitary evolution of the system and baths also allows us to evaluate the steady correlations that build between the system and the baths, and correlations that grow between the baths.

Improved bound on entropy production in a quantum annealer

For a system described by a multivariate probability density function obeying the fluctuation theorem, the average dissipation is lower bounded by the degree of asymmetry of the marginal distributions (namely the relative entropy between the marginal and its mirror image). We formally prove that such a lower bound is tighter than the recently reported bound expressed in terms of the precision of the marginal (i.e., the thermodynamic uncertainty relation) and is saturable. We illustrate the result with examples and we apply it to achieve one of the most accurate experimental estimations of dissipation associated with quantum annealing to date.

Channels, measurements, and postselection in quantum thermodynamics

We analyze the benefit, in terms of extracting work, of having a single use of a quantum channel or measurement in quantum thermodynamics. This highlights a connection between unital and catalytic channels, and some subtleties concerning the conditional work cost of implementing a measurement given that a certain result was obtained. We also consider postselected measurements and show that any nontrivial postselection leads to an unbounded work benefit.

Coherences and the thermodynamic uncertainty relation: Insights from quantum absorption refrigerators

The thermodynamic uncertainty relation, originally derived for classical Markov-jump processes, provides a tradeoff relation between precision and dissipation, deepening our understanding of the performance of quantum thermal machines. Here, we examine the interplay of quantum system coherences and heat current fluctuations on the validity of the thermodynamics uncertainty relation in the quantum regime. To achieve the current statistics, we perform a full counting statistics simulation of the Redfield quantum master equation. We focus on steady-state quantum absorption refrigerators where nonzero coherence between eigenstates can either suppress or enhance the cooling power, compared with the incoherent limit. In either scenario, we find enhanced relative noise of the cooling power (standard deviation of the power over the mean) in the presence of system coherence, thereby corroborating the thermodynamic uncertainty relation. Our results indicate that fluctuations necessitate consideration when assessing the performance of quantum coherent thermal machines.

Two-Qubit Engine Fueled by Entanglement and Local Measurements

We introduce a two-qubit engine that is powered by entanglement and local measurements. Energy is extracted from the detuned qubits coherently exchanging a single excitation. Generalizing to an N-qubit chain, we show that the low energy of the first qubit can be up-converted to an arbitrarily high energy at the last qubit by successive neighbor swap operations and local measurements. We finally model the local measurement as the entanglement of a qubit with a meter, and we identify the fuel as the energetic cost to erase the correlations between the qubits. Our findings extend measurement-powered engines to composite working substances and provide a microscopic interpretation of the fueling mechanism.

Charging a quantum battery via nonequilibrium heat current

When a quantum system is subject to a thermal gradient it may sustain a steady nonequilibrium heat current by entering into a so-called nonequilibrium steady state (NESS). Here we show that NESS constitute a thermodynamic resource that can be exploited to charge a quantum battery. This adds to the list of recently reported sources available at the nanoscale, such as coherence, entanglement, and quantum measurements. We elucidate this concept by showing analytic and numerical studies of a two-qubit quantum battery that is alternatively charged by an incoherent heat flow and discharged by application of a properly chosen unitary gate. The presence of a NESS for the charging step guarantees steady operation with positive power output. Decreasing the duration of the charging step results in a time-periodic steady state accompanied by increased efficiency and output power. The device is amenable to implementation with different nanotechnology platforms.

Quantum Coherence and Ergotropy

Constraints on work extraction are fundamental to our operational understanding of the thermodynamics of both classical and quantum systems. In the quantum setting, finite-time control operations typically generate coherence in the instantaneous energy eigenbasis of the dynamical system. Thermodynamic cycles can, in principle, be designed to extract work from this nonequilibrium resource. Here, we isolate and study the quantum coherent component to the work yield in such protocols. Specifically, we identify a coherent contribution to the ergotropy (the maximum amount of unitarily extractable work via cyclical variation of Hamiltonian parameters). We show this by dividing the optimal transformation into an incoherent operation and a coherence extraction cycle. We obtain bounds for both the coherent and incoherent parts of the extractable work and discuss their saturation in specific settings. Our results are illustrated with several examples, including finite-dimensional systems and bosonic Gaussian states that describe recent experiments on quantum heat engines with a quantized load.

Quantum Work Statistics with Initial Coherence

The two-point measurement scheme for computing the thermodynamic work performed on a system requires it to be initially in equilibrium. The Margenau-Hill scheme, among others, extends the previous approach to allow for a non-equilibrium initial state. We establish a quantitative comparison between both schemes in terms of the amount of coherence present in the initial state of the system, as quantified by the l1-coherence measure. We show that the difference between the two first moments of work, the variances of work, and the average entropy production obtained in both schemes can be cast in terms of such initial coherence. Moreover, we prove that the average entropy production can take negative values in the Margenau-Hill framework.

Exploring the role of asymmetric-pulse modulation in quantum thermal machines and quantum thermometry

We explore the consequences of periodically modulating a quantum two-level system (TLS) with an asymmetric pulse when the system is in contact with thermal baths. By adopting the Floquet-Lindblad formalism for our analysis, we find that the unequal "up" and "down" time duration of the pulse has two main ramifications. First, the energy gap of the multiple sidebands or photon sectors created as a result of the periodic modulation are renormalized by a term which is dependent on both the modulation strength as well as the fraction of up (or down) time duration. Second, the weights of the different sidebands are no longer symmetrically distributed about the central band or zero photon sector. We illustrate the advantages of these findings in the context of applications in quantum thermal machines and thermometry. For a thermal machine constructed by coupling the TLS to two thermal baths, we demonstrate that the asymmetric pulse provides an extra degree of control over the mode of operation of the thermal machine. Further, by appropriately tuning the weight of the subbands, we also show that an asymmetric pulse may provide superior optimality in a recently proposed protocol for quantum thermometry, where dynamical control has been shown to enhance the precision of measurement.

Maxwell's Lesser Demon: A Quantum Engine Driven by Pointer Measurements

We discuss a self-contained spin-boson model for a measurement-driven engine, in which a demon generates work from thermal excitations of a quantum spin via measurement and feedback control. Instead of granting it full direct access to the spin state and to Landauer's erasure strokes for optimal performance, we restrict this demon's action to pointer measurements, i.e., random or continuous interrogations of a damped mechanical oscillator that assumes macroscopically distinct positions depending on the spin state. The engine can reach simultaneously the power and efficiency benchmarks and operate in temperature regimes where quantum Otto engines would fail.

Bosons outperform fermions: The thermodynamic advantage of symmetry

We examine a quantum Otto engine with a harmonic working medium consisting of two particles to explore the use of wave function symmetry as an accessible resource. It is shown that the bosonic system displays enhanced performance when compared to two independent single particle engines, while the fermionic system displays reduced performance. To this end, we explore the trade-off between efficiency and power output and the parameter regimes under which the system functions as engine, refrigerator, or heater. Remarkably, the bosonic system operates under a wider parameter space both when operating as an engine and as a refrigerator.

Measurement Induced Synthesis of Coherent Quantum Batteries

Quantum coherence represented by a superposition of energy eigenstates is, together with energy, an important resource for quantum technology and thermodynamics. Energy and quantum coherence however, can be complementary. The increase of energy can reduce quantum coherence and vice versa. Recently, it was realized that steady-state quantum coherence could be autonomously harnessed from a cold environment. We propose a conditional synthesis of N independent two-level systems (TLS) with partial quantum coherence obtained from an environment to one coherent system using a measurement able to increase both energy and coherence simultaneously. The measurement process acts here as a Maxwell demon synthesizing the coherent energy of individual TLS to one large coherent quantum battery. The measurement process described by POVM elements is diagonal in energy representation and, therefore, it does not project on states with quantum coherence at all. We discuss various strategies and their efficiency to reach large coherent energy of the battery. After numerical optimization and proof-of-principle tests, it opens way to feasible repeat-until-success synthesis of coherent quantum batteries from steady-state autonomous coherence.

Unifying Paradigms of Quantum Refrigeration: A Universal and Attainable Bound on Cooling

Cooling quantum systems is arguably one of the most important thermodynamic tasks connected to modern quantum technologies and an interesting question from a foundational perspective. It is thus of no surprise that many different theoretical cooling schemes have been proposed, differing in the assumed control paradigm and complexity, and operating either in a single cycle or in steady state limits. Working out bounds on quantum cooling has since been a highly context dependent task with multiple answers, with no general result that holds independent of assumptions. In this Letter we derive a universal bound for cooling quantum systems in the limit of infinite cycles (or steady state regimes) that is valid for any control paradigm and machine size. The bound only depends on a single parameter of the refrigerator and is theoretically attainable in all control paradigms. For qubit targets we prove that this bound is achievable in a single cycle and by autonomous machines.

Efficiency of a cyclic quantum heat engine with finite-size baths

In this paper we investigate the relationship between the efficiency of a cyclic quantum heat engine with the Hilbert space dimension of the thermal baths. By means of a general inequality, we show that the Carnot efficiency can be obtained only when both the hot and cold baths are infinitely large. By further introducing a specific model where the baths are constituted of ensembles of finite-dimensional particles, we further demonstrate the relationship between the engine's power and efficiency, with the dimension of the working substance and the bath particles.

Characterizing a Statistical Arrow of Time in Quantum Measurement Dynamics

In both thermodynamics and quantum mechanics, the arrow of time is characterized by the statistical likelihood of physical processes. We characterize this arrow of time for the continuous quantum measurement dynamics of a superconducting qubit. By experimentally tracking individual weak measurement trajectories, we compare the path probabilities of forward and backward-in-time evolution to develop an arrow of time statistic associated with measurement dynamics. We compare the statistics of individual trajectories to ensemble properties showing that the measurement dynamics obeys both detailed and integral fluctuation theorems, thus establishing the consistency between microscopic and macroscopic measurement dynamics.

Nonequilibrium dynamics with finite-time repeated interactions

We study quantum dynamics in the framework of repeated interactions between a system and a stream of identical probes. We present a coarse-grained master equation that captures the system's dynamics in the natural regime where interactions with different probes do not overlap, but it is otherwise valid for arbitrary values of the interaction strength and mean interaction time. We then apply it to some specific examples. For probes prepared in Gibbs states, such channels have been used to describe thermalization: while this is the case for many choices of parameters, for others one finds out-of-equilibrium states including inverted Gibbs and maximally mixed states. Gapless probes can be interpreted as performing an indirect measurement, and we study the energy transfer associated with this measurement.