CBETA: First Multipass Superconducting Linear Accelerator with Energy Recovery

Multiplexed emitting system for an energy-recovery-linac-based coherent light source

Recently, a novel approach has been proposed to produce ultrashort, fully coherent high-repetition-rate EUV and X-ray radiation by combining an energy recovery linac (ERL) with the angular-dispersion-induced microbunching methodology. It is critical to maintain microbunching when the beam passes through bending magnets between the undulators, which results in difficulties supporting multiple beamlines. In this paper, the design of a multiplexed emitting system consisting of multi-bend achromats, matching sections and radiators to facilitate the multi-beamline operation is presented. Theoretical analysis and numerical simulations have been carried out and the results show that the microbunching and beam quality can be well maintained after four times of bending. Five radiation pulses with a central wavelength of 13.5 nm and peak power at the MW level have been produced by the same electron beam via this multiplexed emitting system. The proposed method holds potential in the multi-beamline operation of ERL- or storage-ring-based coherent light sources.

Novel approach to push the limit of temporal resolution in ultrafast electron diffraction accelerators

Ultrafast electron diffraction techniques that employ relativistic electrons as a probe have been in the spotlight as a key technology for visualizing structural dynamics which take place on a time scale of a few femtoseconds to hundreds femtoseconds. These applications highly demand not only extreme beam quality in 6-D phase space such as a few nanometer transverse emittances and femtosecond duration but also equivalent beam stability. Although these utmost requirements have been demonstrated by a compact setup with a high-gradient electron gun with state-of-the-art laser technologies, this approach is fundamentally restricted by its nature for compressing the electrons in a short distance by a ballistic bunching method. Here, we propose a new methodology that pushes the limit of timing jitter beyond the state-of-the-art by utilizing consecutive RF cavities. This layout already exists in reality for energy recovery linear accelerator demonstrators. Furthermore, the demonstrators are able to provide MHz repetition rates, which are out of reach for most conventional high-gradient electron guns.

Improving the electrostatic design of the Jefferson Lab 300 kV DC photogun

The 300 kV DC high voltage photogun at Jefferson Lab was redesigned to deliver electron beams with a much higher bunch charge and improved beam properties. The original design provided only a modest longitudinal electric field (E_z) at the photocathode, which limited the achievable extracted bunch charge. To reach the bunch charge goal of approximately few nC with 75 ps full-width at half-maximum Gaussian laser pulse width, the existing DC high voltage photogun electrodes and anode-cathode gap were modified to increase E_z at the photocathode. In addition, the anode aperture was spatially shifted with respect to the beamline longitudinal axis to minimize the beam deflection introduced by the non-symmetric nature of the inverted insulator photogun design. We present the electrostatic design of the original photogun and the modified photogun and beam dynamics simulations that predict vastly improved performance. We also quantify the impact of the photocathode recess on beam quality, where recess describes the actual location of the photocathode inside the photogun cathode electrode relative to the intended location. A photocathode unintentionally recessed/misplaced by sub-millimeter distance can significantly impact the downstream beam size.

Beam halo measurements for special bunches in a storage ring by using a coronagraph

We demonstrate an experimental methodology for measuring the halo distribution of special bunches in a storage ring using a synchrotron radiation coronagraph composed of the objective lens and a re-diffraction system. The optimum parameters for the coronagraph were investigated within several boundary conditions by applying a paraxial Fourier transformation sequentially from one plane to the next plane. In addition, the effect of Mie-scattering was estimated for different polishing-quality lenses and it shows that a high-quality lens is capable of achieving a dynamic range of the monitor of about 10⁴. The capability of the halo monitor has been demonstrated by measuring the horizontal particle distribution of special bunches in beam experiments at the BESSY II storage ring. This monitor offers a new opportunity for continuous monitoring of special bunches in the storage ring such as transverse resonance island buckets and pulse-picking by resonant excitation, which open new horizons for storage rings that are capable of sophisticated experiments using a single bunch signal as well as serving high-flux users simultaneously.

Measurement of bunch length and temporal distribution using accelerating radio frequency cavity in low-emittance injector

We demonstrate an experimental methodology for measuring the temporal distribution of pico-second level electron bunch with low energy using radial electric and azimuthal magnetic fields of an accelerating (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\hbox {TM}_{01}$$\end{document}TM01 mode) radio frequency (RF) cavity that is used for accelerating electron beams in a linear accelerator. In this new technique, an accelerating RF cavity provides a phase-dependent transverse kick to the electrons, resulting in the linear coupling of the trajectory angle with the longitudinal position inside the bunch. This method does not require additional devices on the beamline since it uses an existing accelerating cavity for the projection of the temporal distribution to the transverse direction. We present the theoretical basis of the proposed method and validate it experimentally in the compact-energy recovery linac accelerator at KEK. Measurements were demonstrated using a 2-cell superconducting booster cavity with a peak on-axis accelerating field (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_0$$\end{document}E0) of 7.21 MV/m.