Observation of Top Quark Production in p-barp Collisions with the Collider Detector at Fermilab

70 years of hyperon spectroscopy: a review of strange Ξ, Ω baryons, and the spectrum of charmed and bottom baryons

The first hyperon was discovered about 70 years ago, but the nature of these particles, particularly with regard to multistrange hyperons, and many of their properties can still be considered to be literally strange. A dedicated and successful global spectroscopy program in the 1960s and 1970s usingK-beams revealed many multistrange candidates, but the available evidence of their existence is statistically limited. For this reason, there is still much to learn about the systematics of the spectrum of excited hyperon states and what they have in common with their non-strange companions, or how they differ from the nucleon and Δ resonances. Results from photo- and electroproduction experiments off the proton and neutron using polarized beams and targets have provided intriguing evidence for new nucleon excitations and shed light on the structure of some of the known nucleon and Δ states. Recent years have also seen a great deal of progress in the field of charmed and bottom baryon spectroscopy. Unprecedented data from the Large Hadron Collider in particular indicate continued rapid progress in the field of bottom baryons. On the theoretical side, baryons with one heavy quarkQand a lightqqsystem serve as an ideal laboratory for studying lightqq(diquark) correlations and the dynamics of the light quarks in the colour environment of a heavy quark. In this review, we discuss the status of doubly and triply strange Ξ as well as Ω baryons, and the properties of all the known charmed and bottom states. The comparison of the two heavy sectors reveals many similarities as predicted by heavy-quark symmetries, together with differences in mass splittings easily understood by potential models. The multi-strange hyperons bridge the under-explored gap between the light- and the heavy-flavour baryons. How do the properties of a singly charmedQ-qqsystem change with decreasing mass of the heavy quark in the transition to a doubly strangeq-QQsystem with a heavier quark-quark system relative to one light quark? Significant progress towards understanding hyperon resonances is expected in coming years from the ongoing experiments at the high-energy collider facilities and planned experiments usingKbeams at Jefferson Laboratory and J-PARC.

Measurement of the top quark mass using a profile likelihood approach with the lepton + jets final states in proton-proton collisions at s=13TeV

The mass of the top quark is measured in 36.3fb - 1 of LHC proton-proton collision data collected with the CMS detector at s = 13 Te V . The measurement uses a sample of top quark pair candidate events containing one isolated electron or muon and at least four jets in the final state. For each event, the mass is reconstructed from a kinematic fit of the decay products to a top quark pair hypothesis. A profile likelihood method is applied using up to four observables per event to extract the top quark mass. The top quark mass is measured to be 171.77 ± 0.37 Ge V . This approach significantly improves the precision over previous measurements.

Measurement of the differential tt¯ production cross section as a function of the jet mass and extraction of the top quark mass in hadronic decays of boosted top quarks

A measurement of the jet mass distribution in hadronic decays of Lorentz-boosted top quarks is presented. The measurement is performed in the lepton + jets channel of top quark pair production (t t ¯ ) events, where the lepton is an electron or muon. The products of the hadronic top quark decay are reconstructed using a single large-radius jet with transverse momentum greater than 400Ge V . The data were collected with the CMS detector at the LHC in proton-proton collisions and correspond to an integrated luminosity of 138fb - 1 . The differential t t ¯ production cross section as a function of the jet mass is unfolded to the particle level and is used to extract the top quark mass. The jet mass scale is calibrated using the hadronic W boson decay within the large-radius jet. The uncertainties in the modelling of the final state radiation are reduced by studying angular correlations in the jet substructure. These developments lead to a significant increase in precision, and a top quark mass of 173.06 ± 0.84 Ge V .

An updated review of the new hadron states

The past decades witnessed the golden era of hadron physics. Many excited open heavy flavor mesons and baryons have been observed since 2017. We shall provide an updated review of the recent experimental and theoretical progresses in this active field. Besides the conventional heavy hadrons, we shall also review the recently observed open heavy flavor tetraquark statesX(2900) andTcc+(3875)as well as the hidden heavy flavor multiquark statesX(6900),Pcs(4459)0,Zcs(3985)-,Zcs(4000)+, andZcs(4220)+. We will also cover the recent progresses on the glueballs and light hybrid mesons, which are the direct manifestations of the non-AbelianSU(3) gauge interaction of the Quantum Chromodynamics in the low-energy region.

Tevatron greatest hits

The Tevatron collider led the World energy frontier program in particle physics during the late 20th and early 21st centuries. During this exciting period the standard model of particle physics was in its final stages of development and the search for physics beyond the standard model became one of the main research topics. In this review article we summarize the design and performance of the Tevatron collider and its two detectors, CDF and D0, as well as their evolution. Highlights of the Tevatron scientific results are provided, including the discovery of the top quark and measurements of its properties, studies and discoveries of the particles containing heavy quarks, precision studies of the strong and electroweak forces, searches for beyond the standard model particles and interactions, as well as the hunt for the Higgs boson.

The scientific potential and technological challenges of the High-Luminosity Large Hadron Collider program

We present an overview of the High-Luminosity (HL-LHC) program at the Large Hadron Collider (LHC), its scientific potential and technological challenges for both the accelerator and detectors. The HL-LHC program is expected to start circa 2027 and aims to increase the integrated luminosity delivered by the LHC by an order of magnitude at the collision energy of 14 TeV. This requires upgrades to the injector system, accelerator complex and luminosity levelling. The two experiments, ATLAS and CMS, require substantial upgrades to most of their systems in order to cope with the increased interaction rate, and much higher radiation levels than at the current LHC. We present selected examples based on novel ideas and technologies for applications at a hadron collider. Both experiments will replace their tracking systems. We describe the ATLAS pixel detector upgrade featuring novel tilted modules, and the CMS Outer Tracker upgrade with a new module design enabling use of tracks in the level-1 trigger system. CMS will also install state-of-the-art highly segmented calorimeter endcaps. Finally, we describe new picosecond precision timing detectors of both experiments. In addition, we discuss how the upgrades will enhance the physics performance of the experiments, and solve the computing challenges posed by the expected large data sets. The physics program of the HL-LHC is focused on precision measurements probing the limits of the Standard Model (SM) of particle physics and discovering new physics. We present a selection of studies that have been carried out to motivate the HL-LHC program. A central topic of exploration will be the characterization of the Higgs boson. The large HL-LHC data samples will extend the sensitivity of searches for new particles or new interactions whose existence has been hypothesized in order to explain shortcomings of the SM. Finally, we comment on the nature of large scientific collaborations.

Evidence for Top Quark Production in Nucleus-Nucleus Collisions

Ultrarelativistic heavy ion collisions recreate in the laboratory the thermodynamical conditions prevailing in the early universe up to 10^{-6}  sec, thereby allowing the study of the quark-gluon plasma (QGP), a state of quantum chromodynamics (QCD) matter with deconfined partons. The top quark, the heaviest elementary particle known, is accessible in nucleus-nucleus collisions at the CERN LHC, and constitutes a novel probe of the QGP. Here, we report the first evidence for the production of top quarks in nucleus-nucleus collisions, using lead-lead collision data at a nucleon-nucleon center-of-mass energy of 5.02 TeV recorded by the CMS experiment. Two methods are used to measure the cross section for top quark pair production (σ_{tt[over ¯]}) via the selection of charged leptons (electrons or muons) and bottom quarks. One method relies on the leptonic information alone, and the second one exploits, in addition, the presence of bottom quarks. The measured cross sections, σ_{tt[over ¯]}=2.54_{-0.74}^{+0.84} and 2.03_{-0.64}^{+0.71}  μb, respectively, are compatible with expectations from scaled proton-proton data and QCD predictions.

Symmetries and Their Breaking in the Fundamental Laws of Physics

Symmetries in the Physical Laws of Nature lead to observable effects. Beyond the regularities and conserved magnitudes, the last few decades in particle physics have seen the identification of symmetries, and their well-defined breaking, as the guiding principle for the elementary constituents of matter and their interactions. Flavour SU(3) symmetry of hadrons led to the Quark Model and the antisymmetric requirement under exchange of identical fermions led to the colour degree of freedom. Colour became the generating charge for flavour-independent strong interactions of quarks and gluons in the exact colour SU(3) local gauge symmetry. Parity Violation in weak interactions led us to consider the chiral fields of fermions as the objects with definite transformation properties under the weak isospin SU(2) gauge group of the Unifying Electro-Weak SU(2) × U(1) symmetry, which predicted novel weak neutral current interactions. CP-Violation led to three families of quarks opening the field of Flavour Physics. Time-reversal violation has recently been observed with entangled neutral mesons, compatible with CPT-invariance. The cancellation of gauge anomalies, which would invalidate the gauge symmetry of the quantum field theory, led to Quark–Lepton Symmetry. Neutrinos were postulated in order to save the conservation laws of energy and angular momentum in nuclear beta decay. After the ups and downs of their mass, neutrino oscillations were discovered in 1998, opening a new era about their origin of mass, mixing, discrete symmetries and the possibility of global lepton-number violation through Majorana mass terms and Leptogenesis as the source of the matter–antimatter asymmetry in the universe. The experimental discovery of quarks and leptons and the mediators of their interactions, with physical observables in spectacular agreement with this Standard Theory, is the triumph of Symmetries. The gauge symmetry is exact only when the particles are massless. One needs a subtle breaking of the symmetry, providing the origin of mass without affecting the excellent description of the interactions. This is the Brout–Englert–Higgs Mechanism, which produces the Higgs Boson as a remnant, discovered at CERN in 2012. Open present problems are addressed with by searching the New Physics Beyond-the-Standard-Model.

Charge Asymmetry in Top Quark Pair Production

The top quark is the heaviest elementary particle known. It has been proposed many times that new physics beyond the current theory of elementary particles may reveal itself in top quark interactions. The charge asymmetry in the pair production of a fermion and its antiparticle has been known for many decades. Early measurements of such asymmetry in top quark pair production showed a disagreement with the prediction by more than 3 standard deviations. Many years of an effort on both experimental and theoretical side have allowed to understand the top quark pair charge asymmetry better and to bring back the agreement between the measurements and the theory. In this article, these efforts are reviewed together with the discussion about a potential future of such measurements.

Extracting the Top-Quark Width from Nonresonant Production

In the context of the standard model of particle physics, the relationship between the top-quark mass and width (Γ_{t}) has been precisely calculated. However, the uncertainty from current direct measurements of the width is nearly 50%. A new approach for directly measuring the top-quark width using events away from the resonance peak is presented. By using an orthogonal dataset to traditional top-quark width extractions, this new method may enable significant improvements in the experimental sensitivity in a method combination. Recasting a recent ATLAS differential cross section measurement, we find Γ_{t}=1.28±0.30  GeV (1.33±0.29  GeV expected), providing the most precise direct measurement of the width.

Measurement of the top quark mass in the all-jets final state at s = 13 TeV and combination with the lepton+jets channel

A top quark mass measurement is performed using 35.9 fb - 1 of LHC proton-proton collision data collected with the CMS detector ats = 13 TeV . The measurement uses the t t ¯ all-jets final state. A kinematic fit is performed to reconstruct the decay of the t t ¯  system and suppress the multijet background. Using the ideogram method, the top quark mass ( m t ) is determined, simultaneously constraining an additional jet energy scale factor ( JSF ). The resulting value ofm t = 172.34 ± 0.20 (stat+JSF) ± 0.70 (syst) GeV is in good agreement with previous measurements. In addition, a combined measurement that uses the t t ¯ lepton+jets and all-jets final states is presented, using the same mass extraction method, and provides an m t measurement of 172.26 ± 0.07 (stat+JSF) ± 0.61 (syst) GeV . This is the first combined m t extraction from the lepton+jets and all-jets channels through a single likelihood function.

Managing data recovery for Long Term Data Preservation

In the latest years, CNAF worked at a project of Long Term Data Preservation (LTDP) for the CDF experiment, that ran at Fermilab after 1985. A part of this project has the goal of archiving data produced during Run I into recent and reliable storage devices, in order to preserve their availability for further access through not obsolete technologies. In this paper, we report and explain the work done to manage the process of retrieving the aforementioned data, which were stored into about four thousands 2.5/5GB 8mm tape cartridges of different producers, which were widely popular in the nineties. The hardware setup for tape reading is briefly detailed. Particular focus is on describing in-house software tools and backend database that have been set up to drive and orchestrate the tape readers and to deal with the high number of possible problems arising during the process of reading data from hardly reliable media. The outcome of each operation is accounted into the database, making possible to monitor the overall progress and to retry unsuccessful read attempts at a later stage. The implemented solution has proved effective at reading a first 20% of the total amount. The process is currently ongoing. Even though a few aspects of this work are strictly dependant on how the CDF experiment organized its datasets, we believe that several decisions taken and the overall organization still make sense on a variety of use cases, where a relevant amount of data has to be retrieved from obsolete media.

Essay: Half a Century of the Standard Model*,†

The standard model is a quantum field theory that successfully accounts for the strong, weak, and electromagnetic interactions of the known elementary particles. In this essay I reminisce about the forerunners of the standard model, the beginnings of the model half a century ago, and its development and confirmation from then to the present.

Direct top-quark decay width measurement in the t t ¯ lepton+jets channel at s = 8 TeV with the ATLAS experiment

This paper presents a direct measurement of the decay width of the top quark using t t ¯ events in the lepton+jets final state. The data sample was collected by the ATLAS detector at the LHC in proton-proton collisions at a centre-of-mass energy of 8 TeV and corresponds to an integrated luminosity of 20.2 fb- 1 . The decay width of the top quark is measured using a template fit to distributions of kinematic observables associated with the hadronically and semileptonically decaying top quarks. The result,Γ t = 1.76 ± 0.33 ( stat. ) - 0.68 + 0.79 ( syst. ) GeV for a top-quark mass of 172.5 GeV, is consistent with the prediction of the Standard Model.

Measurement of double-differential cross sections for top quark pair production in pp collisions at [Formula: see text][Formula: see text] and impact on parton distribution functions

Normalized double-differential cross sections for top quark pair ([Formula: see text]) production are measured in pp collisions at a centre-of-mass energy of 8[Formula: see text] with the CMS experiment at the LHC. The analyzed data correspond to an integrated luminosity of 19.7[Formula: see text]. The measurement is performed in the dilepton [Formula: see text] final state. The [Formula: see text] cross section is determined as a function of various pairs of observables characterizing the kinematics of the top quark and [Formula: see text] system. The data are compared to calculations using perturbative quantum chromodynamics at next-to-leading and approximate next-to-next-to-leading orders. They are also compared to predictions of Monte Carlo event generators that complement fixed-order computations with parton showers, hadronization, and multiple-parton interactions. Overall agreement is observed with the predictions, which is improved when the latest global sets of proton parton distribution functions are used. The inclusion of the measured [Formula: see text] cross sections in a fit of parametrized parton distribution functions is shown to have significant impact on the gluon distribution.

A review of the open charm and open bottom systems

Since the discovery of the first charmed meson in 1976, many open-charm and open-bottom hadrons were observed. In 2003 two narrow charm-strange states [Formula: see text] and D _s1(2460) were discovered by the BaBar and CLEO Collaborations, respectively. After that, more excited heavy hadrons were reported. In this work, we review the experimental and theoretical progress in this field.

Draft genome of the lined seahorse, Hippocampus erectus

Background

The lined seahorse, Hippocampus erectus , is an Atlantic species and mainly inhabits shallow sea beds or coral reefs. It has become very popular in China for its wide use in traditional Chinese medicine. In order to improve the aquaculture yield of this valuable fish species, we are trying to develop genomic resources for assistant selection in genetic breeding. Here, we provide whole genome sequencing, assembly, and gene annotation of the lined seahorse, which can enrich genome resource and further application for its molecular breeding. A total of 174.6 Gb (Gigabase) raw DNA sequences were generated by the Illumina Hiseq2500 platform. The final assembly of the lined seahorse genome is around 458 Mb, representing 94% of the estimated genome size (489 Mb by k-mer analysis). The contig N50 and scaffold N50 reached 14.57 kb and 1.97 Mb, respectively. Quality of the assembled genome was assessed by BUSCO with prediction of 85% of the known vertebrate genes and evaluated using the de novo assembled RNA-seq transcripts to prove a high mapping ratio (more than 99% transcripts could be mapped to the assembly). Using homology-based, de novo and transcriptome-based prediction methods, we predicted 20 788 protein-coding genes in the generated assembly, which is less than our previously reported gene number (23 458) of the tiger tail seahorse ( H. comes ). We report a draft genome of the lined seahorse. These generated genomic data are going to enrich genome resource of this economically important fish, and also provide insights into the genetic mechanisms of its iconic morphology and male pregnancy behavior.

Recovering Quantum Properties of Continuous-Variable States in the Presence of Measurement Errors

We present two results which combined enable one to reliably detect multimode, multipartite entanglement in the presence of measurement errors. The first result leads to a method to compute the best (approximated) physical covariance matrix given a measured nonphysical one assuming that no additional information about the measurement is available except the standard deviations from the mean values. The other result states that a widely used entanglement condition is a consequence of negativity of partial transposition. Our approach can quickly verify the entanglement of experimentally obtained multipartite states, which is demonstrated on several realistic examples. Compared to existing detection schemes, ours is very simple and efficient. In particular, it does not require any complicated optimizations.

The Standard Model: how far can it go and how can we tell?

The Standard Model of particle physics encapsulates our current best understanding of physics at the smallest distances and highest energies. It incorporates quantum electrodynamics (the quantized version of Maxwell's electromagnetism) and the weak and strong interactions, and has survived unmodified for decades, save for the inclusion of non-zero neutrino masses after the observation of neutrino oscillations in the late 1990s. It describes a vast array of data over a wide range of energy scales. I review a selection of these successes, including the remarkably successful prediction of a new scalar boson, a qualitatively new kind of object observed in 2012 at the Large Hadron Collider. New calculational techniques and experimental advances challenge the Standard Model across an ever-wider range of phenomena, now extending significantly above the electroweak symmetry breaking scale. I will outline some of the consequences of these new challenges, and briefly discuss what is still to be found.This article is part of the themed issue 'Unifying physics and technology in light of Maxwell's equations'.

The Standard Model from LHC to future colliders

This review summarizes the results of the activities which have taken place in 2014 within the Standard Model Working Group of the "What Next" Workshop organized by INFN, Italy. We present a framework, general questions, and some indications of possible answers on the main issue for Standard Model physics in the LHC era and in view of possible future accelerators.

Improving identification of dijet resonances at hadron colliders

The experimental detection of resonances has played a vital role in the development of subatomic physics. The overwhelming multijet backgrounds at the Large Hadron Collider (LHC) necessitate the invention of new techniques to identify resonances decaying into a pair of partons. In this Letter we introduce an observable that achieves a significant improvement in several key measurements at the LHC: the Higgs boson decay to a pair of b quarks; W±/Z0 vector-boson hadronic decay; and extensions of the standard model (SM) with a new hadronic resonance. Measuring the Higgs decay to b quarks is a central test of the fermion mass generation mechanism in the SM, whereas the W±/Z0 production rates are important observables of the electroweak sector. Our technique is effective in large parts of phase space where the resonance is mildly boosted and is particularly well suited for experimental searches dominated by systematic uncertainties, which is true of many analyses in the high-luminosity running of the LHC.

Measurement of the single top quark production cross section and |Vtb| in events with one charged lepton, large missing transverse energy, and jets at CDF

We report a measurement of single top quark production in proton-antiproton collisions at a center-of-mass energy of sqrt[s]=1.96  TeV using a data set corresponding to 7.5  fb(-1) of integrated luminosity collected by the Collider Detector at Fermilab. We select events consistent with the single top quark decay process t→Wb→ℓνb by requiring the presence of an electron or muon, a large imbalance of transverse momentum indicating the presence of a neutrino, and two or three jets including at least one originating from a bottom quark. An artificial neural network is used to discriminate the signal from backgrounds. We measure a single top quark production cross section of 3.04(-0.53)(+0.57)  pb and set a lower limit on the magnitude of the coupling between the top quark and bottom quark |Vtb|>0.78 at the 95% credibility level.

Measurement of top quark-antiquark pair production in association with a W or Z boson in pp collisions at [Formula: see text][Formula: see text]

A measurement of the cross section for the production of top quark-antiquark pairs ([Formula: see text]) in association with a vector boson V (W or Z) in proton-proton collisions at [Formula: see text][Formula: see text] is presented. The results are based on a dataset corresponding to an integrated luminosity of 19.5 fb[Formula: see text] recorded with the CMS detector at the LHC. The measurement is performed in three leptonic (e and [Formula: see text]) channels: a same-sign dilepton analysis targeting [Formula: see text] events, and trilepton and four-lepton analyses designed for [Formula: see text] events. In the same-sign dilepton channel, the [Formula: see text] cross section is measured as [Formula: see text], corresponding to a significance of 1.6 standard deviations over the background-only hypothesis. Combining the trilepton and four-lepton channels, a direct measurement of the [Formula: see text] cross section, [Formula: see text], is obtained with a significance of 3.1 standard deviations. The measured cross sections are compatible with standard model predictions within their experimental uncertainties. The inclusive [Formula: see text] process is observed with a significance of 3.7 standard deviations from the combination of all three leptonic channels.

Precision measurement of the top quark mass in lepton + jets final States

We measure the mass of the top quark in lepton+jets final states using the full sample of pp collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at sqrt[s] = 1.96 TeV, corresponding to 9.7 fb(-1) of integrated luminosity. We use a matrix element technique that calculates the probabilities for each event to result from tt production or background. The overall jet energy scale is constrained in situ by the mass of the W boson. We measure m(t) = 174.98 ± 0.76 GeV. This constitutes the most precise single measurement of the top-quark mass.

Search for s-channel single-top-quark production in events with missing energy plus jets in pp collisions at sqrt[s] = 1.96 TeV

The first search for single-top-quark production from the exchange of an s-channel virtual W boson using events with an imbalance in the total transverse energy, b-tagged jets, and no identified leptons is presented. Assuming the electroweak production of top quarks of mass 172.5 GeV/c(2) in the s channel, a cross section of 1.12(-0.57)(+0.61) (stat+syst) pb with a significance of 1.9 standard deviations is measured. This measurement is combined with the result obtained from events with an imbalance in total transverse momentum, b-tagged jets, and exactly one identified lepton, yielding a cross section of 1.36(-0.32)(+0.37) (stat+syst) pb, with a significance of 4.2 standard deviations.

Observation of the associated production of a single top quark and a W boson in pp collisions at sqrt[s] = 8 TeV

The first observation of the associated production of a single top quark and a W boson is presented. The analysis is based on a data set corresponding to an integrated luminosity of 12.2 fb(-1) of proton-proton collisions at sqrt[s] = 8 TeV recorded by the CMS experiment at the LHC. Events with two leptons and a jet originating from a b quark are selected. A multivariate analysis based on kinematic and topological properties is used to separate the signal from the dominant tt background. An excess consistent with the signal hypothesis is observed, with a significance which corresponds to 6.1 standard deviations above a background-only hypothesis. The measured production cross section is 23.4 ± 5.4 pb, in agreement with the standard model prediction.