Thickness induced structural transition in suspended fcc metal nanofilms

In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials

Solid-state phase transformation is an intriguing phenomenon in crystalline or noncrystalline solids due to the distinct physical and chemical properties that can be obtained and modified by phase engineering. Compared to bulk solids, nanomaterials exhibit enhanced capability for phase engineering due to their small sizes and high surface-to-volume ratios, facilitating various emerging applications. To establish a comprehensive atomistic understanding of phase engineering, in situ transmission electron microscopy (TEM) techniques have emerged as powerful tools, providing unprecedented atomic-resolution imaging, multiple characterization and stimulation mechanisms, and real-time integrations with various external fields. In this Review, we present a comprehensive overview of recent advances in in situ TEM studies to characterize and modulate nanomaterials for phase transformations under different stimuli, including mechanical, thermal, electrical, environmental, optical, and magnetic factors. We briefly introduce crystalline structures and polymorphism and then summarize phase stability and phase transformation models. The advanced experimental setups of in situ techniques are outlined and the advantages of in situ TEM phase engineering are highlighted, as demonstrated via several representative examples. Besides, the distinctive properties that can be obtained from in situ phase engineering are presented. Finally, current challenges and future research opportunities, along with their potential applications, are suggested.

Analytical modeling and numerical analysis of thermoelastic damping in ultrathin elastic films due to surface effects

Analytical techniques used for estimating thermoelastic damping by incorporating both mechanical and thermal interactions between surfaces and the rest of the bulk are intricate and challenging due to the limited understanding of the damping mechanisms in extra-thin films subjected to forced vibrations. This paper proposes a modified model to analytically calculate the thermoelastic damping of ultrathin elastic films due to surface effects and analyzes the thermoelastic damping variation with different factors through numerical experiments on two materials. The model considers surface stresses derived from the elastic surface theory using Kirchhoff's kinetic hypothesis and determines thermoelastic damping by considering thermal dissipation and elastic potential energy. The results show that surface effects significantly influence the thermoelastic damping of the film, and the specific behavior of a thin film's thermoelastic damping with respect to film thickness is impacted by various factors, including material property, the variation range of film thickness, and the forced vibration frequency. This study provides insights into the thermoelastic damping behavior of thin films and has important implications for the development of nanoscale oscillators in MEMS or NEMS systems.

Effect of Domain Size, Boundary, and Loading Conditions on Mechanical Properties of Amorphous Silica: A Reactive Molecular Dynamics Study

Mechanical properties are very important when choosing a material for a specific application. They help to determine the range of usefulness of a material, establish the service life, and classify and identify materials. The size effect on mechanical properties has been well established numerically and experimentally. However, the role of the size effect combined with boundary and loading conditions on mechanical properties remains unknown. In this paper, by using molecular dynamics (MD) simulations with the state-of-the-art ReaxFF force field, we study mechanical properties of amorphous silica (e.g., Young's modulus, Poisson's ratio) as a function of domain size, full-/semi-periodic boundary condition, and tensile/compressive loading. We found that the domain-size effect on Young's modulus and Poisson's ratio is much more significant in semi-periodic domains compared to full-periodic domains. The results, for the first time, revealed the bimodular and anisotropic nature of amorphous silica at the atomic level. We also defined a "safe zone" regarding the domain size, where the bulk properties of amorphous silica can be reproducible, while the computational cost and accuracy are in balance.

Formation of gold composite nanowires using cold welding: a structure-based molecular dynamics simulation

Cold welding between nanowires with various grain structures is researched using molecular dynamics simulation.

Structural instability and phase co-existence driven non-Gaussian resistance fluctuations in metal nanowires at low temperatures

We report a detailed experimental study of the resistance fluctuations measured at low temperatures in high quality metal nanowires ranging in diameter from 15-200 nm. The wires exhibit co-existing face-centered-cubic and 4H hcp phases of varying degrees as determined from the x-ray diffraction data. We observe the appearance of a large non-Gaussian noise for nanowires of diameter smaller than 50 nm over a certain temperature range around ≈30 K. The diameter range ∼30 nm, where the noise has maxima coincides with the maximum volume fraction of the co-existing 4H hcp phase thus establishing a strong link between the fluctuation and the phase co-existence. The resistance fluctuation in the same temperature range also shows a deviation of [Formula: see text] behavior at low frequency with appearance of single frequency Lorentzian type contribution in the spectral power density. The fluctuations are thermally activated with an activation energy [Formula: see text] meV, which is of same order as the activation energy of creation of stacking fault in FCC metals that leads to the co-existing crystallographic phases. Combining the results of crystallographic studies of the nanowires and analysis of the resistance fluctuations we could establish the correlation between the appearance of the large resistance noise and the onset of phase co-existence in these nanowires.

Surface-Stress-Induced Phase Transformation of Ultrathin FeCo Nanowires

Ultrathin metal nanowires have attracted wide attention becau se oftheir unique anisotropy and surface-to-volume effects. In this study, we use ultrathin Au nanowires as the templating core to epitaxially grow magnetic iron-cobalt (FeCo) shell through metal-redox with the control on their thickness and stoichiometry. Large surface-stress-induced phase transformation in Au nanowires triggers and stabilizes metastable tetragonal FeCo nanostructure to enhance its magnetic anisotropy and coercivity. Meanwhile, under illumination, plasmon-induced hotspot in ultrathin Au nanowires enables the light-control on magnetic characteristics of FeCo shell. This study demonstrates the feasibility of surface-stress-induced phase transformation to stabilize and control metastable nanostructures for enhanced magnetic anisotropy, which is one of the key properties of functional magnetic materials.

The ideal strength of gold under uniaxial stress: an ab initio study

We employ an ab initio calculation based on density functional theory to investigate the ideal strength of face-centered cubic crystal Au under uniaxial stress along the [100] direction. We show that the stability of the perfect Au crystal under tensile stress is determined by the tetragonal shear stiffness modulus, with an ideal tensile strength of 4.2 GPa and the corresponding Lagrangian tensile strain of ∼ 0.07. The potential bifurcation from the primary uniaxial loading path is along the tetragonal shear. Under compressive stress, there is a stress-free body-centered cubic phase, which is unstable and ready to transform to a stress-free body-centered tetragonal phase with lower internal energy. The stable region is from - 1.6 to 4.2 GPa in the ideal strength, or from - 0.07 to 0.07 in the Lagrangian strain.

Theoretical investigation on the influence of temperature and crystallographic orientation on the breaking behavior of copper nanowire

In this paper, molecular dynamics simulations have been conducted to study the mechanical stretching of copper nanowires which will finally lead to the formation of suspended liner atomic chains. A total of 2700 samples have been investigated to achieve a comprehensive understanding of the influence of temperature and orientation on the formation of linear atomic chains. Our results prove that linear atomic chains do exist for [100], [111] and [110] crystallographic directions. Stretching along the [111] direction exhibits a higher probability in forming the two-atom contact than that along the [110] and [100] directions. However, for longer linear atomic chains, there emerges a reversed trend. In addition, increasing temperature may decrease the formation probability for stretching along [111] and [110] directions, but this influence is less obvious for that along the [100] direction.

Shape memory and pseudoelasticity in metal nanowires

Structural reorientations in metallic fcc nanowires are controlled by a combination of size, thermal energy, and the type of defects formed during inelastic deformation. By utilizing atomistic simulations, we show that certain fcc nanowires can exhibit both shape memory and pseudoelastic behavior. We also show that the formation of defect-free twins, a process related to the material stacking fault energy, nanometer size scale, and surface stresses is the mechanism that controls the ability of fcc nanowires of different materials to show a reversible transition between two crystal orientations during loading and thus shape memory and pseudoelasticity.

Shape memory effect in Cu nanowires

A rubber-like pseudoelastic behavior is discovered in single-crystalline face-centered-cubic (FCC) Cu nanowires in atomistic simulations. Nonexistent in bulk Cu, this phenomenon is associated primarily with a reversible crystallographic lattice reorientation driven by the high surface-stress-induced internal stresses due to high surface-to-volume ratios at the nanoscale level. The temperature-dependence of this behavior leads to a shape memory effect (SME). Under tensile loading and unloading, the nanowires exhibit recoverable strains up to over 50%, well beyond the typical recoverable strains of 5-8% for most bulk shape memory alloys (SMAs). This behavior is well-defined for wires between 1.76 and 3.39 nm in size over the temperature range of 100-900 K.

Surface-stress-induced phase transformation in metal nanowires

Several researchers have demonstrated, through experiments and analysis, that the structure and properties of nanometre-scale materials can be quite different to those of bulk materials due to the effect of surfaces. Here we use atomistic simulations to study a surface-stress-induced phase transformation in gold nanowires. The emergence of the transformation is controlled by wire size, initial orientation, boundary conditions, temperature and initial cross-sectional shape. For a <100> initial crystal orientation and wire cross-sectional area below 4 nm(2), surface stresses alone cause gold nanowires to transform from a face-centred-cubic structure to a body-centred-tetragonal structure. The transformation occurs roughly when the compressive stress caused by tensile surface-stress components in the length direction exceeds the compressive stress required to transform bulk gold to its higher energy metastable crystal structure.