New structure model for the GaAs(001)-c(4x4) surface

Electrophilic surface sites as precondition for the chemisorption of pyrrole on GaAs(001) surfaces

We report how the presence of electrophilic surface sites influences the adsorption mechanism of pyrrole on GaAs(001) surfaces. For this purpose, we have investigated the adsorption behavior of pyrrole on different GaAs(001) reconstructions with different stoichiometries and thus different surface chemistries. The interfaces were characterized by x-ray photoelectron spectroscopy, scanning tunneling microscopy, and by reflectance anisotropy spectroscopy in a spectral range between 1.5 and 5 eV. On the As-rich c(4 × 4) reconstruction that exhibits only nucleophilic surface sites, pyrrole was found to physisorb on the surface without any significant modification of the structural and electronic properties of the surface. On the Ga-rich GaAs(001)-(4 × 2)/(6 × 6) reconstructions which exhibit nucleophilic as well as electrophilic surface sites, pyrrole was found to form stable covalent bonds mainly to the electrophilic (charge deficient) Ga atoms of the surface. These results clearly demonstrate that the existence of electrophilic surface sites is a crucial precondition for the chemisorption of pyrrole on GaAs(001) surfaces.

Interaction of Mn with GaAs and InSb: incorporation, surface reconstruction and nano-cluster formation

The deposition of Mn on to reconstructed InSb and GaAs surfaces, without coincident As or Sb flux, has been studied by reflection high energy electron diffraction, atomic force microscopy and scanning tunnelling microscopy. On both Ga- and As-terminated GaAs(0 0 1), (2 × n) Mn-induced reconstruction domains arise with n = 2 for the most well ordered reconstructions. On the Ga-terminated (4 × 6), the Mn-induced (2 × 2) persists up to around 0.5 ML Mn followed by Mn nano-cluster formation. For deposition on initially β2(2 × 4)-reconstructed GaAs(0 0 1), the characteristic trench structure of the reconstruction is partially preserved even beyond 1 monolayer Mn coverage. On both the β2(2 × 4) and c(4 × 4) surfaces, MnAs-like nano-clusters form alongside the reconstruction changes. In contrast, there are no new Mn-induced surface reconstructions on InSb. Instead, the Sb-terminated surfaces of InSb (0 0 1), (1 1 1)A and (1 1 1)B revert to reconstructions characteristic of clean In-rich surfaces after well defined coverages of Mn proportional to the Sb content of the starting reconstruction. These surfaces are decorated with self-assembled MnSb nanoclusters. These results are discussed in terms of basic thermodynamic quantities and the generalized electron counting rule.

Anomalous bismuth-stabilized (2x1) reconstructions on GaAs(100) and InP(100) surfaces

First-principles phase diagrams of bismuth-stabilized GaAs- and InP(100) surfaces demonstrate for the first time the presence of anomalous (2x1) reconstructions, which disobey the common electron counting principle. Combining these theoretical results with our scanning-tunneling-microscopy and photoemission measurements, we identify novel (2x1) surface structures, which are composed of symmetric Bi-Bi and asymmetric mixed Bi-As and Bi-P dimers, and find that they are stabilized by stress relief and pseudogap formation.

PTCDA molecules on an InSb(001) surface studied with atomic force microscopy

PTCDA (3,4,9,10-perylene-tetracarboxylic-dianhydride) molecular structures assembled on an InSb(001) c(8 × 2) reconstructed surface have been studied using frequency modulated atomic force microscopy. The high-resolution imaging of the structures is possible through repulsive interactions, using the constant height scanning mode. During initial stages of growth the [110] diffusion channel dominates as indicated by formation of long PTCDA molecular chains parallel to the [110] crystallographic direction on the InSb surface. For a single monolayer coverage a wetting layer of PTCDA is formed. Finally it is shown that the PTCDA/InSb is a promising system for building molecular nanostructures by manipulation of single molecules with the AFM tip.

Element-specific surface X-ray diffraction study of GaAs(001)-c(4 x 4)

In situ structure analysis of GaAs(001)-c(4 x 4) has been carried out by synchrotron surface x-ray diffraction, which is sensitive to the three-dimensional structure and the atomic species. On the basis of 98 independent in-plane diffractions and 11 fractional-order rod profiles, the atomic coordinates and thermal vibration parameters were determined. X-ray diffraction results show the buckling of surface dimers and a strain field extending up to the sixth layer from the surface. An anomalous diffraction technique has been employed to specify the atomic species of the surface dimers. It has provided direct evidence of the formation of Ga-As heterodimers.

Measurement of the surface strain induced by reconstructed surfaces of GaAs (001) using photoreflectance and reflectance-difference spectroscopies

We report photoreflectance-difference and reflectance-difference measurements on reconstructed GaAs (001) surfaces. From these data the linear and quadratic electro-optic coefficient spectra are determined in the important 2.8-3.4 eV spectral region. The surface strain and fields induced by the surface reconstruction are also determined. We show experimentally that between c(4x4) and (2x4) surfaces, there is an inversion of the surface electric field which we attribute to a direct piezo-electric effect related to the surface strain induced by reconstruction.

Ga-rich limit of surface reconstructions on GaAs(001): atomic structure of the (4 x 6) phase

The Ga-rich reconstruction of the GaAs(001) surface has been studied. Using scanning tunneling microscopy (STM), we have found the existence of a well-ordered (4 x 6) reconstruction under extreme Ga-rich conditions. A structure model, consisting of subsurface Ga-Ga dimers and surface Ga-As dimers, is proposed for the (4 x 6) surface. This model is found to be energetically favorable at the Ga-rich limit and agrees well with our experimental data from STM and reflection high-energy electron diffraction.

Atomic structure of the GaAs(001)-c(4x4) surface: first-principles evidence for diversity of heterodimer motifs

The GaAs(001)-c(4x4) surface was studied using ab initio atomistic thermodynamics based on density-functional theory calculations. We demonstrate that in a range of stoichiometries, between those of the conventional three As-dimer and the new three Ga-As-dimer models, there exists a diversity of atomic structures featuring Ga-As heterodimers. These results fully explain the experimental scanning tunneling microscopy images and are likely to be relevant also to the c(4x4)-reconstructed (001) surfaces of other III-V semiconductors.

Kinetics in surface reconstructions on GaAs(001)

We have successfully controlled the surface structures of GaAs(001) by changing incident As-molecular species. Under As4 fluxes, the c(4 x 4) reconstruction with Ga-As dimers [c(4 x 4)alpha structure] is obtained, but the formation of three As-As dimer structures [c(4 x 4)beta structure] is kinetically limited. On the other hand, the structure change from the (2 x 4), through c(4 x 4)alpha, to c(4 x 4)beta phases is observed under As2 fluxes. We found that the c(4 x 4)alpha structure is energetically metastable and provides a kinetic pathway for the structure change between the (2 x 4) and c(4 x 4)beta phases under As2 fluxes.

Imaging the evolution of lateral composition modulation in strained alloy superlattices

Scanning tunneling microscopy is used to investigate the morphological evolution of GaAs/InAs short period superlattice structures. The layers of the superlattice, either grown in compression or tension, exhibit an island or trench morphology. With increasing film thickness, the islands or trenches grow in size and develop a characteristic spacing along [110] of approximately 150 A. This is the first experimental evidence to suggest that lateral composition modulation arises from both thickness variations of the layers and compositional nonuniformities within the atomic plane.

Atomic structure of InSb(001) and GaAs(001) surfaces imaged with noncontact atomic force microscopy

Noncontact atomic force microscopy (NC-AFM) has been used to study the c(8x2) InSb(001) and the c(8x2) GaAs(001) surfaces prepared by sputter cleaning and annealing. Atomically resolved tip-surface interaction maps display different characteristic patterns depending on the tip front atom type. It is shown that representative AFM maps can be interpreted consistently with the most recent structural model of A(III)B(V)(001) surface, as corresponding to the A(III) sublattice, to the B(V) sublattice, or to the combination of both sublattices.