Protein crystallization with microseed matrix screening: application to human germline antibody Fabs

Conduit CAR: Redirecting CAR T-Cell Specificity with A Universal and Adaptable Bispecific Antibody Platform

The success of chimeric antigen receptor (CAR) T-cell therapy against hematologic malignancies has altered the treatment paradigm for patients with these diseases. Nevertheless, the occurrence of relapse due to antigen escape or heterogeneous antigen expression on tumors remains a challenge for first-generation CAR T-cell therapies as only a single tumor antigen can be targeted. To address this limitation and to add a further level of tunability and control to CAR T-cell therapies, adapter or universal CAR T-cell approaches use a soluble mediator to bridge CAR T cells with tumor cells. Adapter CARs allow simultaneous or sequential targeting of multiple tumor antigens, control of immune synapse geometry, dose control, and the potential for improved safety. Herein, we described a novel CAR T-cell adapter platform that relies on a bispecific antibody (BsAb) targeting both a tumor antigen and the GGGGS (G₄S) linker commonly used in single-chain Fv (ScFv) domains expressed on CAR T-cell surfaces. We demonstrated that the BsAb can bridge CAR T cells to tumor cells and potentiate CAR T-cell activation, proliferation, and tumor cell cytolysis. The cytolytic activity of CAR T-cells was redirected to different tumor antigens by changing the BsAb in a dose-dependent manner. This study highlights the potential of G₄S-displaying CAR T cells to be redirected to engage alternative tumor-associated antigens (TAA).

Significance

New approaches are needed to address relapsed/refractory disease and manage potential toxicities associated with CAR T-cell therapy. We describe an adapter CAR approach to redirect CAR T cells to engage novel TAA-expressing cells via a BsAb targeting a linker present on many clinical CAR T-cell therapeutics. We anticipate the use of such adapters could increase CAR T-cell efficacy and reduce potential CAR-associated toxicities.

Crown-ether-mediated crystal structures of the glycosyltransferase PaGT3 from Phytolacca americana

Uridine diphosphate glycosyltransferases (UGTs) are ubiquitous enzymes that are involved in the glycosylation of small molecules. As glycosylation improves the water solubility and stability of hydrophobic compounds, interest in the use of UGTs for the synthesis of glycosides of poorly soluble compounds is increasing. While sugar-donor recognition in UGTs is conserved with the presence of a plant secondary product glycosyltransferase (PSPG) motif, the basis of the recognition of the sugar acceptor and the regioselectivity of the products is poorly understood owing to low sequence identity around the acceptor-binding region. PaGT3, a glycosyltransferase from the plant Phytolacca americana, can glycosylate a range of acceptors. To illustrate the structure-function relationship of PaGT3, its crystal structure was determined. The sugar-donor and sugar-acceptor binding pockets in PaGT3 were recognized by comparison of its structure with those of other UGTs. The key feature of PaGT3 was the presence of longer loop regions around the hydrophobic acceptor-binding pocket, which resulted in a flexible and wider acceptor binding pocket. In this study, PaGT3 crystals were grown by co-crystallization with 18-crown-6 ether or 15-crown-5 ether. The crown-ether molecule in the asymmetric unit was observed to form a complex with a metal ion, which was coordinated on two sides by the main-chain O atoms of Glu238 from two molecules of the protein. The crown ether-metal complex resembles a molecular glue that sticks two molecules of PaGT3 together to enhance crystal growth. Thus, this result provides an insight into the substrate-recognition strategy in PaGT3 for the study of glycosyltransferases. Additionally, it is shown that crown ether-metal ion complexes can be used as a molecular glue for the crystallization of proteins.

From Initial Hit to Crystal Optimization with Microseeding of Human Carbonic Anhydrase IX—A Case Study for Neutron Protein Crystallography

Human carbonic anhydrase IX (CA IX) is a multi-domain membrane protein that is therefore difficult to express or crystalize. To prepare crystals that are suitable for neutron studies, we are using only the catalytic domain of CA IX with six surface mutations, named surface variant (SV). The crystallization of CA IX SV, and also partly deuterated CA IX SV, was enabled by the use of microseed matrix screening (MMS). Only three drops with crystals were obtained after initial sparse matrix screening, and these were used as seeds in subsequent crystallization trials. Application of MMS, commercial screens, and refinement resulted in consistent crystallization and diffraction-quality crystals. The crystallization protocols and strategies that resulted in consistent crystallization are presented. These results demonstrate not only the use of MMS in the growth of large single crystals for neutron studies with defined conditions, but also that MMS enabled re-screening to find new conditions and consistent crystallization success.

X-ray transparent microfluidic platforms for membrane protein crystallization with microseeds

Crystallization of membrane proteins is a critical step for uncovering atomic resolution 3-D structures and elucidating structure-function relationships. Microseeding, the process of transferring sub-microscopic crystal nuclei from initial screens into new crystallization experiments, is an effective, yet underutilized approach to grow crystals suitable for X-ray crystallography. Here, we report simplified methods for crystallization of membrane proteins that utilize microseeding in X-ray transparent microfluidic chips. First, a microfluidic method for introduction of microseed dilutions into metastable crystallization experiments is demonstrated for photoactive yellow protein and cytochrome bo3 oxidase. As microseed concentration decreased, the number of crystals decreased while the average size increased. Second, we demonstrate a microfluidic chip for microseed screening, where many crystallization conditions were formulated on-chip prior to mixing with microseeds. Crystallization composition, crystal size, and diffraction data were collected and mapped on phase diagrams, which revealed that crystals of similar diffraction quality and size typically grow in distinct regions of the phase diagram.

Advanced Methods of Protein Crystallization

This chapter provides a review of different advanced methods that help to increase the success rate of a crystallization project, by producing larger and higher quality single crystals for determination of macromolecular structures by crystallographic methods. For this purpose, the chapter is divided into three parts. The first part deals with the fundamentals for understanding the crystallization process through different strategies based on physical and chemical approaches. The second part presents new approaches involved in more sophisticated methods not only for growing protein crystals but also for controlling the size and orientation of crystals through utilization of electromagnetic fields and other advanced techniques. The last section deals with three different aspects: the importance of microgravity, the use of ligands to stabilize proteins, and the use of microfluidics to obtain protein crystals. All these advanced methods will allow the readers to obtain suitable crystalline samples for high-resolution X-ray and neutron crystallography.

An Adaptive Mutation in Enterococcus faecium LiaR Associated with Antimicrobial Peptide Resistance Mimics Phosphorylation and Stabilizes LiaR in an Activated State

The cyclic antimicrobial lipopeptide daptomycin (DAP) triggers the LiaFSR membrane stress response pathway in enterococci and many other Gram-positive organisms. LiaR is the response regulator that, upon phosphorylation, binds in a sequence-specific manner to DNA to regulate transcription in response to membrane stress. In clinical settings, non-susceptibility to DAP by Enterococcus faecium is correlated frequently with a mutation in LiaR of Trp73 to Cys (LiaR^W73C). We have determined the structure of the activated E. faecium LiaR protein at 3.2Å resolution and, in combination with solution studies, show that the activation of LiaR induces the formation of a LiaR dimer that increases LiaR affinity at least 40-fold for the extended regulatory regions upstream of the liaFSR and liaXYZ operons. In vitro, LiaR^W73C induces phosphorylation-independent dimerization of LiaR and provides a biochemical basis for non-susceptibility to DAP by the upregulation of the LiaFSR regulon. A comparison of the E. faecalis LiaR, E. faecium LiaR, and the LiaR homolog from Staphylococcus aureus (VraR) and the mutations associated with DAP resistance suggests that physicochemical properties such as oligomerization state and DNA specificity, although tuned to the biology of each organism, share some features that could be targeted for new antimicrobials.

Structural diversity in a human antibody germline library

To support antibody therapeutic development, the crystal structures of a set of 16 germline variants composed of 4 different kappa light chains paired with 4 different heavy chains have been determined. All four heavy chains of the antigen-binding fragments (Fabs) have the same complementarity-determining region (CDR) H3 that was reported in an earlier Fab structure. The structure analyses include comparisons of the overall structures, canonical structures of the CDRs and the VH:VL packing interactions. The CDR conformations for the most part are tightly clustered, especially for the ones with shorter lengths. The longer CDRs with tandem glycines or serines have more conformational diversity than the others. CDR H3, despite having the same amino acid sequence, exhibits the largest conformational diversity. About half of the structures have CDR H3 conformations similar to that of the parent; the others diverge significantly. One conclusion is that the CDR H3 conformations are influenced by both their amino acid sequence and their structural environment determined by the heavy and light chain pairing. The stem regions of 14 of the variant pairs are in the ‘kinked’ conformation, and only 2 are in the extended conformation. The packing of the VH and VL domains is consistent with our knowledge of antibody structure, and the tilt angles between these domains cover a range of 11 degrees. Two of 16 structures showed particularly large variations in the tilt angles when compared with the other pairings. The structures and their analyses provide a rich foundation for future antibody modeling and engineering efforts.

De Novo Sequencing and Resurrection of a Human Astrovirus-Neutralizing Antibody

Monoclonal antibody (mAb) therapeutics targeting cancer, autoimmune diseases, inflammatory diseases, and infectious diseases are growing exponentially. Although numerous panels of mAbs targeting infectious disease agents have been developed, their progression into clinically useful mAbs is often hindered by the lack of sequence information and/or loss of hybridoma cells that produce them. Here we combine the power of crystallography and mass spectrometry to determine the amino acid sequence and glycosylation modification of the Fab fragment of a potent human astrovirus-neutralizing mAb. We used this information to engineer a recombinant antibody single-chain variable fragment that has the same specificity as the parent monoclonal antibody to bind to the astrovirus capsid protein. This antibody can now potentially be developed as a therapeutic and diagnostic agent.

A novel microseeding method for the crystallization of membrane proteins in lipidic cubic phase

Random microseed matrix screening (rMMS), in which seed crystals are added to random crystallization screens, is an important breakthrough in soluble protein crystallization that increases the number of crystallization hits that are available for optimization. This greatly increases the number of soluble protein structures generated every year by typical structural biology laboratories. Inspired by this success, rMMS has been adapted to the crystallization of membrane proteins, making LCP seed stock by scaling up LCP crystallization conditions without changing the physical and chemical parameters that are critical for crystallization. Seed crystals are grown directly in LCP and, as with conventional rMMS, a seeding experiment is combined with an additive experiment. The new method was used with the bacterial integral membrane protein OmpF, and it was found that it increased the number of crystallization hits by almost an order of magnitude: without microseeding one new hit was found, whereas with LCP-rMMS eight new hits were found. It is anticipated that this new method will lead to better diffracting crystals of membrane proteins. A method of generating seed gradients, which allows the LCP seed stock to be diluted and the number of crystals in each LCP bolus to be reduced, if required for optimization, is also demonstrated.

Crystallographic and modelling studies suggest that the SKICH domains from different protein families share a common Ig-like fold but harbour substantial structural variations

TAX1BP1 is a pleiotropic multi-domain protein involved in many important biological processes such as signal transduction, cell growth and apoptosis, transcriptional coactivation, membrane trafficking, neurotransmission and autophagy. The N-terminus of TAX1BP1 contains a SKICH domain implicated in autophagy. SKICH domains are also present in four other proteins including NDP52, CALCOCO1, SKIP and PIPP. The SKICH domains of SKIP and PIPP mediate plasma membrane localisation. The functions of the SKICH domains of NDP52 and CALCOCO1 are not known. Here we report the crystal structure of the TAX1BP1 SKICH domain, which has an Ig-like fold similar to the NDP52 SKICH domain. Extensive pairwise and clustered aromatic π-stacking interactions are present in the TAX1BP1 SKICH domain. The aromatic residues mediating these interactions can be classified into four groups with varying degrees of conservation among different protein families. The interactions mediated by highly conserved residues are found in the interior and one outward face of the Ig-like β-barrel, representing common structural features of the SKICH domains. Three TAX1BP1-specific pairwise interactions locate in the loop regions, each augmented by a proline-aromatic interaction. The three proline-aromatic clusters are linked together by more generic hydrophobic interactions, forming a unique hydrophobic surface at one end of the TAX1BP1 SKICH domain. The structures and homologous models of SKICH domains from different proteins reveal substantial differences in electrostatic surface properties of the domains. Together with existing biochemical data, results from the structural study suggest that an intact SKICH domain is required for the autophagy function of TAX1BP1.

Microseed matrix screening for optimization in protein crystallization: what have we learned?

Protein crystals obtained in initial screens typically require optimization before they are of X-ray diffraction quality. Seeding is one such optimization method. In classical seeding experiments, the seed crystals are put into new, albeit similar, conditions. The past decade has seen the emergence of an alternative seeding strategy: microseed matrix screening (MMS). In this strategy, the seed crystals are transferred into conditions unrelated to the seed source. Examples of MMS applications from in-house projects and the literature include the generation of multiple crystal forms and different space groups, better diffracting crystals and crystallization of previously uncrystallizable targets. MMS can be implemented robotically, making it a viable option for drug-discovery programs. In conclusion, MMS is a simple, time- and cost-efficient optimization method that is applicable to many recalcitrant crystallization problems.