Modeling and Operator Control of a Robotic Tool for Bidirectional Manipulation in Targeted Prostate Biopsy

Closed-Loop Control of a Tendon-Driven Active Needle for Tip Tracking at Desired Bending Angle for High-Dose-Rate Prostate Brachytherapy

Prostate cancer is the second most common malignancy in American men. High-dose-rate brachytherapy is a popular treatment technique in which a large, localized radiation dose is used to kill cancer. Utilization of curvilinear catheter implantation inside the prostate gland to provide access channels to host the radiation source has shown superiority in terms of improved dosimetric constraints compared to straight needles. To this aim, we have introduced an active needle to curve inside the prostate conformal to the patient's specific anatomical relationship for improved dose distribution to the prostate and reduced toxicity to the organs at risk (OARs). This work presents closed-loop control of our tendon-driven active needle in water medium and air using the position feedback of the tip obtained in real time from an ultrasound (US) or an electromagnetic (EM) tracking sensor, respectively. The active needle consists of a compliant flexure section to realize bending in two directions via actuation of two internal tendons. Tracking errors using US and EM tracker are estimated and compared. Results show that the bending angle of the active needle could be controlled using position feedback of the US or the EM tracking system with a bending angle error of less than 1.00 degree, when delay is disregarded. It is concluded that the actuation system and controller, presented in this work, are able to realize a desired bending angle at the active needle tip with reasonable accuracy paving the path for tip tracking and manipulation control evaluations in a prostate brachytherapy.

A mechanics-based model for a tendon-driven active needle navigating inside a multiple-layer tissue

Percutaneous minimally invasive procedures such brachytherapy and biopsy require a flexible active needle for precise movement inside tissue and accurate placement at target positions for higher success rates for diagnosis and treatment, respectively. In a previous work, we presented a tendon-driven active needle to navigate inside tissue. This work presents a new model to predict the deflection of the tendon-driven needle while steering in a multiple-layer soft tissue. A multi-layer phantom tissue with different localized stiffness was developed for needle insertion tests followed by indentation tests to identify its mechanical properties. Using a robot that inserts and actively bends the tendon-driven needle inside the soft tissue while simultaneously tracking the needle through ultrasound imaging, various experiments were conducted for model validation. The proposed model was verified by comparing the simulation results to the empirical data. The results demonstrated the accuracy of the model in predicting the tendon-driven needle deflection in multiple-layer (different stiffness) soft tissue.

Hingeless arm for space robotics actuated through shape memory alloys

Operating outside the spacecraft via remotely controlled structures is an important opportunity in different space applications. The research in this area is focused on designing robots that are sufficiently flexible to allow inspection in locations where access is difficult or impossible for astronauts, while minimizing weight and bulk. The purpose of the research is to design a borescope for space applications with no hinges or other mechanisms, exploiting biomimetic design concepts. This is pursued by giving to the borescope a backbone exoskeleton provided by a continuous structure made of fibre reinforced composite material and using NiTi wires as tendons, taking advantage of their low weight and dimensions, which allow them to be embedded between the composite layers during the lamination process. After a study of the state of the art of flexible structures, concentrated in the medical and robotic fields, the research work unfolded in two phases. In the first design phase, several composite layup solutions were considered and analysed using finite element models, leading to the definition of the borescope geometrical parameters and to an initial estimate of the displacements that can be achieved. In the second experimental phase, seven prototypes were produced and tested, with one or more wires, to validate the design and to search for a configuration that can be actuated in different directions. The borescope prototypes resulted flexible enough to achieve an extended degree of bending and at the same time sufficiently rigid to allow complete rearm of the NiTi wires. The numerical and experimental study led to the definition of the design parameters, the number of wires, and the manufacturing technique to integrate NiTi actuators.

HDR Brachytherapy Planning using Active Needles - Preliminary Investigation on Dose Planning

In this study we present a new approach to plan a high-dose-rate (HDR) prostate brachytherapy (BT) using active needles recently developed by our group. The active needles realize bi-directional bending inside the tissue, and thereby more compliant with the patient's anatomy compared with conventional straight needles. A computational method is presented to first generate a needle arrangement configuration based on the patient's prostate anatomy. The needle arrangement is generated to cover the prostate volume, providing accessible channels for the radiation source during a HDR BT. The needle arrangement configuration avoids healthy organs and prevents needle collision inside the body. Then a treatment plan is proposed to ensure sufficient prescribed dosage to the whole prostate gland. The method is applied to a prostate model reconstructed from an anonymized patient to show the feasibility of this method. Finally, the active needle's capability to generate the required bending is shown. We have shown that our method is able to automatically generate needle arrangement configuration using active needles, and plan for a treatment that meets the dose objectives while using fewer needles (about 20% of conventional straight needles) than the conventional HDR BT performed by straight needles.