Breast Cancer Detection using Multimodal Time Series Features from Ultrasound Shear Wave Absolute Vibro-Elastography

Deep learning algorithm using bispectrum analysis energy feature maps based on ultrasound radiofrequency signals to detect breast cancer

Background

Ultrasonography is an important imaging method for clinical breast cancer screening. As the original echo signals of ultrasonography, ultrasound radiofrequency (RF) signals provide abundant tissue macroscopic and microscopic information and have important development and utilization value in breast cancer detection.

Methods

In this study, we proposed a deep learning method based on bispectrum analysis feature maps to process RF signals and realize breast cancer detection. The bispectrum analysis energy feature maps with frequency subdivision were first proposed and applied to breast cancer detection in this study. Our deep learning network was based on a weight sharing network framework for the input of multiple feature maps. A feature map attention module was designed for multiple feature maps input of the network to adaptively learn both feature maps and features that were conducive to classification. We also designed a similarity constraint factor, learning the similarity and difference between feature maps by cosine distance.

Results

The experiment results showed that the areas under the receiver operating characteristic curves of our proposed method in the validation set and two independent test sets for benign and malignant breast tumor classification were 0.913, 0.900, and 0.885, respectively. The performance of the model combining four ultrasound bispectrum analysis energy feature maps in breast cancer detection was superior to that of the model using an ultrasound grayscale image and the model using a single bispectrum analysis energy feature map in this study.

Conclusion

The combination of deep learning technology and our proposed ultrasound bispectrum analysis energy feature maps effectively realized breast cancer detection and was an efficient method of feature extraction and utilization of ultrasound RF signals.

Multi-Frequency 3D Shear Wave Absolute Vibro-Elastography (S-WAVE) System for the Prostate

This article describes a novel system for quantitative and volumetric measurement of tissue elasticity in the prostate using simultaneous multi-frequency tissue excitation. Elasticity is computed by using a local frequency estimator to measure the three-dimensional local wavelengths of steady-state shear waves within the prostate gland. The shear wave is created using a mechanical voice coil shaker which transmits simultaneous multi-frequency vibrations transperineally. Radio frequency data is streamed directly from a BK Medical 8848 transrectal ultrasound transducer to an external computer where tissue displacement due to the excitation is measured using a speckle tracking algorithm. Bandpass sampling is used that eliminates the need for an ultra-fast frame rate to track the tissue motion and allows for accurate reconstruction at a sampling frequency that is below the Nyquist rate. A roll motor with computer control is used to rotate the transducer and obtain 3D data. Two commercially available phantoms were used to validate both the accuracy of the elasticity measurements as well as the functional feasibility of using the system for in vivo prostate imaging. The phantom measurements were compared with 3D Magnetic Resonance Elastography (MRE), where a high correlation of 96% was achieved. In addition, the system has been used in two separate clinical studies as a method for cancer identification. Qualitative and quantitative results of 11 patients from these clinical studies are presented here. Furthermore, an AUC of 0.87±0.12 was achieved for malignant vs. benign classification using a binary support vector machine classifier trained with data from the latest clinical study with leave one patient out cross-validation.

3-D Ultrafast Shear Wave Absolute Vibro-Elastography Using a Matrix Array Transducer

Real-time ultrasound imaging plays an important role in ultrasound-guided interventions. The 3-D imaging provides more spatial information compared to conventional 2-D frames by considering the volumes of data. One of the main bottlenecks of 3-D imaging is the long data acquisition time, which reduces practicality and can introduce artifacts from unwanted patient or sonographer motion. This article introduces the first shear wave absolute vibro-elastography (S-WAVE) method with real-time volumetric acquisition using a matrix array transducer. In S-WAVE, an external vibration source generates mechanical vibrations inside the tissue. The tissue motion is then estimated and used in solving a wave equation inverse problem to provide the tissue elasticity. A matrix array transducer is used with a Verasonics ultrasound machine and a frame rate of 2000 volumes/s to acquire 100 radio frequency (RF) volumes in 0.05 s. Using plane wave (PW) and compounded diverging wave (CDW) imaging methods, we estimate axial, lateral, and elevational displacements over 3-D volumes. The curl of the displacements is used with local frequency estimation to estimate elasticity in the acquired volumes. Ultrafast acquisition extends substantially the possible S-WAVE excitation frequency range, now up to 800 Hz, enabling new tissue modeling and characterization. The method was validated on three homogeneous liver fibrosis phantoms and on four different inclusions within a heterogeneous phantom. The homogeneous phantom results show less than 8% (PW) and 5% (CDW) difference between the manufacturer values and the corresponding estimated values over a frequency range of 80-800 Hz. The estimated elasticity values for the heterogeneous phantom at 400-Hz excitation frequency show the average errors of 9% (PW) and 6% (CDW) compared to the provided average values by magnetic resonance elastography (MRE). Furthermore, both imaging methods were able to detect the inclusions within the elasticity volumes. An ex vivo study on a bovine liver sample shows less than 11% (PW) and 9% (CDW) difference between the estimated elasticity ranges by the proposed method and the elasticity ranges provided by MRE and acoustic radiation force impulse (ARFI).

3-D Transducer Mounted Shear Wave Absolute Vibro-Elastography: Proof of Concept

Quantitative tissue stiffness characterization using ultrasound (US) has been shown to improve prostate cancer (PCa) detection in multiple studies. Shear wave absolute vibro-elastography (SWAVE) allows quantitative and volumetric assessment of tissue stiffness using external multifrequency excitation. This article presents a proof of concept of a first-of-a-kind 3-D hand-operated endorectal SWAVE system designed to be used during systematic prostate biopsy. The system is developed with a clinical US machine, requiring only an external exciter that can be mounted directly to the transducer. Subsector acquisition of radio frequency (RF) data allows imaging of shear waves with a high effective frame rate (up to 250 Hz). The system was characterized using eight different quality assurance phantoms. Due to the invasive nature of prostate imaging, at this early stage of development, validation of in vivo human tissue was instead carried out by intercostally scanning the livers of n = 7 healthy volunteers. The results are compared with 3-D magnetic resonance elastography (MRE) and an existing 3-D SWAVE system with a matrix array transducer (M-SWAVE). High correlations were found with MRE (99% in phantoms, 94% in liver data) and with M-SWAVE (99% in phantoms, 98% in liver data).

Texture Analysis for the Bone Age Assessment from MRI Images of Adolescent Wrists in Boys

Currently, bone age is assessed by X-rays. It enables the evaluation of the child's development and is an important diagnostic factor. However, it is not sufficient to diagnose a specific disease because the diagnoses and prognoses may arise depending on how much the given case differs from the norms of bone age.

BACKGROUND

The use of magnetic resonance images (MRI) to assess the age of the patient would extend diagnostic possibilities. The bone age test could then become a routine screening test. Changing the method of determining the bone age would also prevent the patient from taking a dose of ionizing radiation, making the test less invasive.

METHODS

The regions of interest containing the wrist area and the epiphyses of the radius are marked on the magnetic resonance imaging of the non-dominant hand of boys aged 9 to 17 years. Textural features are computed for these regions, as it is assumed that the texture of the wrist image contains information about bone age.

RESULTS

The regression analysis revealed that there is a high correlation between the bone age of a patient and the MRI-derived textural features derived from MRI. For DICOM T1-weighted data, the best scores reached 0.94 R2, 0.46 RMSE, 0.21 MSE, and 0.33 MAE.

CONCLUSIONS

The experiments performed have shown that using the MRI images gives reliable results in the assessment of bone age while not exposing the patient to ionizing radiation.

Identification of Anomalies in Mammograms through Internet of Medical Things (IoMT) Diagnosis System

Breast cancer is the primary health issue that women may face at some point in their lifetime. This may lead to death in severe cases. A mammography procedure is used for finding suspicious masses in the breast. Teleradiology is employed for online treatment and diagnostics processes due to the unavailability and shortage of trained radiologists in backward and remote areas. The availability of online radiologists is uncertain due to inadequate network coverage in rural areas. In such circumstances, the Computer-Aided Diagnosis (CAD) framework is useful for identifying breast abnormalities without expert radiologists. This research presents a decision-making system based on IoMT (Internet of Medical Things) to identify breast anomalies. The proposed technique encompasses the region growing algorithm to segment tumor that extracts suspicious part. Then, texture and shape-based features are employed to characterize breast lesions. The extracted features include first and second-order statistics, center-symmetric local binary pattern (CS-LBP), a histogram of oriented gradients (HOG), and shape-based techniques used to obtain various features from the mammograms. Finally, a fusion of machine learning algorithms including K-Nearest Neighbor (KNN), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA are employed to classify breast cancer using composite feature vectors. The experimental results exhibit the proposed framework's efficacy that separates the cancerous lesions from the benign ones using 10-fold cross-validations. The accuracy, sensitivity, and specificity attained are 96.3%, 94.1%, and 98.2%, respectively, through shape-based features from the MIAS database. Finally, this research contributes a model with the ability for earlier and improved accuracy of breast tumor detection.

Breast Cancer—How Can Imaging Help?

Breast cancer is the most common malignant disease among women, causing death and suffering worldwide. It is known that, for the improvement of the survival rate and the psychological impact it has on patients, early detection is crucial. For this to happen, the imaging techniques should be used at their full potential. We selected and examined 44 articles that had as subject the use of a specific imaging method in breast cancer management (mammography, ultrasound, MRI, ultrasound-guided biopsy, PET-CT). After analyzing their data, we summarized and concluded which are the best ways to use each one of the mentioned techniques for a good outcome. We created a simplified algorithm with easy steps that can be followed by radiologists when facing this type of neoplasia.