Human motion quality and accuracy measuring method for human–robot physical interactions

In human–robot collaboration (HRC), human motion capture can be considered an enabler for switching autonomy between humans and robots to create efficient and safe operations. For this purpose, wearable motion tracking systems such as IMU and lighthouse-based systems have been used to transfer human joint motions into robot controller models. Due to reasons such as global positioning, drift, and occlusion, in some situations, e.g., HRC, both systems have been combined. However, it is still not clear if the motion quality (e.g., smoothness, naturalness, and spatial accuracy) is sufficient when the human operator is in the loop. This article presents a novel approach for measuring human motion quality and accuracy in HRC. The human motion capture has been implemented in a laboratory environment with a repetition of forty-cycle operations. Human motion, specifically of the wrist, is guided by the robot tool center point (TCP), which is predefined for generating circular and square motions. Compared to the robot TCP motion considered baseline, the hand wrist motion deviates up to 3 cm. The approach is valuable for understanding the quality of human motion behaviors and can be scaled up for various applications involving human and robot shared workplaces.

Mixed Reality-Enhanced Intuitive Teleoperation with Hybrid Virtual Fixtures for Intelligent Robotic Welding

This paper presents an integrated scheme based on a mixed reality (MR) and haptic feedback approach for intuitive and immersive teleoperation of robotic welding systems. By incorporating MR technology, the user is fully immersed in a virtual operating space augmented by real-time visual feedback from the robot working space. The proposed robotic tele-welding system features imitative motion mapping from the user’s hand movements to the welding robot motions, and it enables the spatial velocity-based control of the robot tool center point (TCP). The proposed mixed reality virtual fixture (MRVF) integration approach implements hybrid haptic constraints to guide the operator’s hand movements following the conical guidance to effectively align the welding torch for welding and constrain the welding operation within a collision-free area. Onsite welding and tele-welding experiments identify the operational differences between professional and unskilled welders and demonstrate the effectiveness of the proposed MRVF tele-welding framework for novice welders. The MRVF-integrated visual/haptic tele-welding scheme reduced the torch alignment times by 56% and 60% compared to the MRnoVF and baseline cases, with minimized cognitive workload and optimal usability. The MRVF scheme effectively stabilized welders’ hand movements and eliminated undesirable collisions while generating smooth welds.

Trajectory Extrapolation for Manual Robot Remote Welding

This article describes an algorithm for the online extrapolation of hand-motion during remote welding. The aim is to overcome the spatial limitations of the human welder’s arms in order to cover a larger workspace with a continuous weld seam and to substantially relieve the welder from strain and fatigue. Depending on the sampled hand-motion data, an extrapolation of the given motion patterns is achieved by decomposing the input signals in a linear direction and a periodic motion component. An approach to efficiently determine the periodicity using a sampled autocorrelation function and the subsequent application of parameter identification using a spline function are presented in this paper. The proposed approach is able to resemble all practically relevant motion patterns and has been validated successfully on a remote welding system with limited input space and audio-visual feedback by an experienced welder.

A review on applications of rotary-wing unmanned aerial vehicle charging stations

Today’s technology allows people to remotely control and monitor many systems. In these technological systems, robots or unmanned vehicles are generally used, which are controlled remotely without human interaction. Unmanned aerial vehicle (UAV), which does not have a pilot on it, is one of the unmanned vehicles capable of flying either remotely or automatically. UAVs are among the systems that are used in many fields for military, civil, and academic purposes and are constantly developing in parallel with the advancement of technology. One of the biggest problems of UAVs that are effectively used in many areas is undoubtedly flight times. To overcome this situation, charging stations are used and allow the UAV batteries to be charged without human intervention. In this article, a review study about the charging stations developed for charging batteries used in UAVs has been made. In this study, the findings obtained as a result of literature research on charging stations were analyzed and the performances of charging stations were compared. The main purpose of this review study is to guide people who will develop a charging station for rotary-wing UAVs by providing a preliminary research opportunity and to help choose one of the wired or wireless charging stations according to the needs in the applications to be developed.

Homecare Robotic Systems for Healthcare 4.0: Visions and Enabling Technologies

Powered by the technologies that have originated from manufacturing, the fourth revolution of healthcare technologies is happening (Healthcare 4.0). As an example of such revolution, new generation homecare robotic systems (HRS) based on the cyber-physical systems (CPS) with higher speed and more intelligent execution are emerging. In this article, the new visions and features of the CPS-based HRS are proposed. The latest progress in related enabling technologies is reviewed, including artificial intelligence, sensing fundamentals, materials and machines, cloud computing and communication, as well as motion capture and mapping. Finally, the future perspectives of the CPS-based HRS and the technical challenges faced in each technical area are discussed.