A Review of Electric Impedance Matching Techniques for Piezoelectric Sensors, Actuators and Transducers

Any electric transmission lines involving the transfer of power or electric signal requires the matching of electric parameters with the driver, source, cable, or the receiver electronics. Proceeding with the design of electric impedance matching circuit for piezoelectric sensors, actuators, and transducers require careful consideration of the frequencies of operation, transmitter or receiver impedance, power supply or driver impedance and the impedance of the receiver electronics. This paper reviews the techniques available for matching the electric impedance of piezoelectric sensors, actuators, and transducers with their accessories like amplifiers, cables, power supply, receiver electronics and power storage. The techniques related to the design of power supply, preamplifier, cable, matching circuits for electric impedance matching with sensors, actuators, and transducers have been presented. The paper begins with the common tools, models, and material properties used for the design of electric impedance matching. Common analytical and numerical methods used to develop electric impedance matching networks have been reviewed. The role and importance of electrical impedance matching on the overall performance of the transducer system have been emphasized throughout. The paper reviews the common methods and new methods reported for electrical impedance matching for specific applications. The paper concludes with special applications and future perspectives considering the recent advancements in materials and electronics.

Dependence of pulser driving responses on electrical and motional characteristics of NDE ultrasonic probes

Acoustic performance in ultrasonic transmitters can be improved by means of a suitable electrical driving response and matching/tuning networks. It is important to predict this electrical response, but doing so is not easy because it departs notably from the nominal pattern with the loading probes. In practice, the analysis of HV pulser spikes in NDE applications requires fairly complex models in the transient regime and, in addition, non-linear problems could arise, especially in the case of tuned transmitters. In this paper, the most relevant influences of loading characteristics of NDT ultrasonic probes on the pulser electrical driving responses are evaluated in time and frequency domains. Conventional pulse generators and typical NDE pulsers are considered. Driving responses are analysed across commercial ultrasonic probes and, alternatively, across similar purely electrical loads. Distinct influences on pulser responses from electrical and motional sections of the probes are identified. All these aspects are studied on the basis of experimental and computer results.

Improvement in transient piezoelectric responses of NDE transceivers using selective damping and tuning networks

NDE ultrasonic applications for quality control purposes, based on piezoelectric devices working as pulsed ultrasonic probes, usually include some tuning circuit either across the pulser output connectors or close to the piezoelectric probe electrodes. Classic criteria to determine tuning parameters in ultrasonic transducers do not perform very well in transient regime under the typical electrical conditions and peculiar output impedances of the required high-voltage pulsers. In most practical situations, the tuning values are manually adjusted in specific circuits for each NDE case, testing each channel of a multiprobe inspection system to find the best sensitivity. In this paper, the positive influences of certain selective damping and tuning networks on the time and frequency behaviors of NDE piezoelectric transceivers are analyzed in detail. Different waveforms and spectra of received ultrasonic signals are comparatively evaluated for different real tuning conditions, after passing through two ultrasonic processes linked in cascade: a transmitter of industrial type and a broad-band ultrasonic receiver. Piezoelectric transducer impedances, transduction transfer functions, and HV output spikes from a piezoelectrically loaded NDE pulser, are computed, to identify separately the influence of each stage. In order to improve amplitude and axial resolution in the received transient responses, relative contributions from emission and reception tuning networks are individually evaluated for a particular NDE two-stage piezoelectric channel. Also shown are the final experimental results relative to the ultrasonic test pulse and detected in a through-transmission NDE configuration, gradually improved by using distinct tuning levels.

Ultrasonic transducers as a black-box: equivalent circuit synthesis and matching network design

A new modeling technique for ultrasonic transducers is developed in order to build an analytical model in the Laplace s-domain. The model is intended for use in analog circuit CAD system for the front-end electronic design and to visualize the acoustic pulse modifications under different excitation conditions. The transducer is characterized by two analytical functions representing the driving point impedance and the electroacoustic transfer function. The transfer function is obtained as the ratio of the transducer axial response and the excitation voltage. The reference responses of the impedance and transfer function are derived by the Fourier transform of the measured signals. The model is derived by the measurements of the driving point current and voltage, and the field axial response is sensed by a hydrophone. The procedure for the model identification is described. The results of testing 5-MHz transducer for medical applications are presented. An approach for the design of broadband matching networks using a constant resistance network is reported.