Pediatric Airway Stent Designed to Facilitate Mucus Transport and Atraumatic Removal

Robotic system for magnetic resonance imaging-guided focused ultrasound treatment of thyroid nodules

BACKGROUND

Herein, a robotic system offering Magnetic Resonance-guided Focused Ultrasound (MRgFUS) therapy of thyroid nodules was developed.

METHODS

The robotic system offers linear motion in 2 PC-controlled axes that navigate a 3 MHz single-element focused transducer. The system, through a C-arm structure attaches to the table of Magnetic Resonance Imaging (MRI) scanners and couples to the neck of patients lying in the supine position. The MRI compatibility of the developed system was assessed inside a 3 T scanner. Benchtop and MRI feasibility studies evaluating the heating performance of the system were executed on excised pork tissue and on homogeneous and thyroid model agar-based phantoms.

RESULTS

The MRI compatibility of the system was successfully established. Grid sonications executed using robotic motion inflicted discrete and overlapping lesions on the excised tissue, while magnetic resonance (MR) thermometry successfully monitored thermal heating in agar-based phantoms.

CONCLUSIONS

The developed system was found to be efficient with ex-vivo evaluation. The system can perform clinical MRgFUS therapy of thyroid nodules and other shallow targets after further in-vivo evaluation.

A novel ex vivo tracheobronchomalacia model for airway stent testing and in vivo model refinement

OBJECTIVES

We sought to develop an ex vivo trachea model capable of producing mild, moderate, and severe tracheobronchomalacia for optimizing airway stent design. We also aimed to determine the amount of cartilage resection required for achieving different tracheobronchomalacia grades that can be used in animal models.

METHODS

We developed an ex vivo trachea test system that enabled video-based measurement of internal cross-sectional area as intratracheal pressure was cyclically varied for peak negative pressures of 20 to 80 cm H2O. Fresh ovine tracheas were induced with tracheobronchomalacia by single mid-anterior incision (n = 4), mid-anterior circumferential cartilage resection of 25% (n = 4), and 50% per cartilage ring (n = 4) along an approximately 3-cm length. Intact tracheas (n = 4) were used as control. All experimental tracheas were mounted and experimentally evaluated. In addition, helical stents of 2 different pitches (6 mm and 12 mm) and wire diameters (0.52 mm and 0.6 mm) were tested in tracheas with 25% (n = 3) and 50% (n = 3) circumferentially resected cartilage rings. The percentage collapse in tracheal cross-sectional area was calculated from the recorded video contours for each experiment.

RESULTS

Ex vivo tracheas compromised by single incision and 25% and 50% circumferential cartilage resection produce tracheal collapse corresponding to clinical grades of mild, moderate, and severe tracheobronchomalacia, respectively. A single anterior cartilage incision produces saber-sheath type tracheobronchomalacia, whereas 25% and 50% circumferential cartilage resection produce circumferential tracheobronchomalacia. Stent testing enabled the selection of stent design parameters such that airway collapse associated with moderate and severe tracheobronchomalacia could be reduced to conform to, but not exceed, that of intact tracheas (12-mm pitch, 0.6-mm wire diameter).

CONCLUSIONS

The ex vivo trachea model is a robust platform that enables systematic study and treatment of different grades and morphologies of airway collapse and tracheobronchomalacia. It is a novel tool for optimization of stent design before advancing to in vivo animal models.

A single-tube-braided stent for various airway structures

Background: Airway stent has been widely used in airway procedures. However, the metallic and silicone tubular stents are not customized designed for individual patients and cannot adapt to complicated obstruction structures. Other customized stents could not adapt to complex airway structures with easy and standardized manufacturing methods.

Object: This study aimed to design a series of novel stents with different shapes which can adapt to various airway structures, such as the “Y” shape structure at the tracheal carina, and to propose a standardized fabrication method to manufacture these customized stents in the same way.

Methods: We proposed a design strategy for the stents with different shapes and introduced a braiding method to prototype six types of single-tube-braided stents. Theoretical model was established to investigate the radial stiffness of the stents and deformation upon compression. We also characterized their mechanical properties by conducting compression tests and water tank tests. Finally, a series of benchtop experiments and ex vivo experiments were conducted to evaluate the functions of the stents.

Results: The theoretical model predicted similar results to the experimental results, and the proposed stents could bear a compression force of 5.79N. The results of water tank tests showed the stent was still functioning even if suffering from continuous water pressure at body temperature for a period of 30 days. The phantoms and ex-vivo experiments demonstrated that the proposed stents adapt well to different airway structures.

Conclusion: Our study offers a new perspective on the design of customized, adaptive, and easy-to-fabricate stents for airway stents which could meet the requirements of various airway illnesses.

Vancomycin-Loaded Polycaprolactone Electrospinning Nanofibers Modulate the Airway Interfaces to Restrain Tracheal Stenosis

Site-specific release of therapeutics at the infected trachea remains a great challenge in clinic. This work aimed to develop a series of vancomycin (VA)-loaded polycaprolactone (PCL) composite nanofiber films (PVNF-n, n = 0, 1, and 5, respectively) via the electrospinning technique. The physiochemical and biological properties of PVNF-n were evaluated by a series of tests, such as FT-IR, XRD, SEM-EDS, and antibacterial assay. The PVNF-n samples displayed a typical network structure of fibers with random directions. VA was successfully introduced into the PCL nanofibers and could be sustained and released. More importantly, PVNF-5 showed relatively good antibacterial activity against both methicillin-resistant Staphylococcus aureus (MRSA) and Streptococcus pneumoniae (SPn). Thus, PVNF-5 was covered onto the self-expandable metallic stent and then implanted into a New Zealand rabbit model to repair tracheal stenosis. Compared to a metallic stent, a commercial pellosil matrix–covered stent, and a PVNF-0–covered metallic stent, the PVNF-5–covered airway stent showed reduced granulation tissue thickness, collagen density, α-SMA, CD68, TNF-α, IL-1, and IL-6 expression. In conclusion, this work provides an anti-infection film–covered airway stent that in site restrains tracheal stenosis.

Synergistic effects of silver nanoparticles and cisplatin in combating inflammation and hyperplasia of airway stents

Anti-inflammatory and antihyperplasia activities are essential requirements for the successful use of airway stents. In this work, silver nanoparticles (AgNPs) and cisplatin (DDP) were combined in a synergistic modification strategy to improve the surface function of airway stents. Using polycaprolactone (PCL) as a drug carrier, a dual-functional PCL-AgNPs-DDP fiber film-coated airway stent was fabricated by electrospinning. The physicochemical and biological properties of the obtained fiber films were examined. The ATR-FTIR, XPS, SEM-EDS and TEM results suggested that AgNPs and DDP could be successfully immobilized onto the airway stent surface. The drug release and surface degradation results revealed that AgNPs and DDP can undergo sustained release from films for 30 d, and the weight loss was approximately 50% after 35 d. In addition, the dual-functional fiber film suppressed human embryonic lung fibroblast growth and exhibited excellent antibacterial activity against Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans. Furthermore, the effectiveness of the dual-functional fiber film-coated airway stent was evaluated by application to the trachea of New Zealand rabbits. The in vivo results indicated that PCL-AgNPs-DDP fiber film-coated airway stent can significantly inhibit granulation tissue formation and collagen deposition, reduced the expression of IL-8, TNF-α, IL-1α, PCNA, α-SMA and CD68, and ultimately achieved anti-inflammatory and antihyperplasia effects. Hence, this study provides a dual-functional surface-coated airway stent to address the clinical complications associated with respiratory tract inflammation and granulation tissue hyperplasia, thus inhibiting tracheal stenosis.

•

This study provides a dual-functional PCL-AgNPs-DDP nanofiber film-coated airway stent.

•

The airway stent processes antibacterial activity and suppress CCC-HPF-1 growth.

•

The stent inhibits tracheal stenosis by antiinflammatory and antihyperplasia treatment.

State of the Science in Tracheal Stents: A Scoping Review

OBJECTIVE

Recent material science advancements are driving tracheal stent innovation. We sought to assess the state of the science regarding materials and preclinical/clinical outcomes for tracheal stents in adults with benign tracheal disease.

METHODS

A comprehensive literature search in April 2021 identified 556 articles related to tracheal stents. One-hundred and twenty-eight full-text articles were reviewed and 58 were included in the final analysis. Datapoints examined were stent materials, clinical applications and outcomes, and preclinical findings, including emerging technologies.

RESULTS

In the 58 included studies, stent materials were metals (n = 28), polymers (n = 19), coated stents (n = 19), and drug-eluting (n = 5). Metals included nitinol, steel, magnesium alloys, and elgiloy. Studies utilized 10 different polymers, the most popular included polydioxanone, poly-l-lactic acid, poly(d,l-lactide-co-glycolide), and polycaprolactone. Coated stents employed a metal or polymer framework and were coated with polyurethane, silicone, polytetrafluoroethylene, or polyester, with some polymer coatings designed specifically for drug elution. Drug-eluting stents utilized mitomycin C, arsenic trioxide, paclitaxel, rapamycin, and doxycycline. Of the 58 studies, 18 were human and 40 were animal studies (leporine = 21, canine = 9, swine = 4, rat = 3, ovine/feline/murine = 1). Noted complications included granulation tissue and/or stenosis, stent migration, death, infection, and fragmentation.

CONCLUSION

An increasing diversity of materials and coatings are employed for tracheal stents, growing more pronounced over the past decade. Though most studies are still preclinical, awareness of tracheal stent developments is important in contextualizing novel stent concepts and clinical trials. Laryngoscope, 2021.

In Vivo Molding of Airway Stents

Like ready-to-wear clothing, medical devices come in a fixed set of sizes. While this may accommodate a large fraction of the patient population, others must either experience suboptimal results due to poor sizing or must do without the device. Although techniques have been proposed to fabricate patient-specific devices in advance of a procedure, this process is expensive and time consuming. An alternative solution that provides every patient with a tailored fit is to create devices that can be customized to the patient's anatomy as they are delivered. This paper reports an in vivo molding process in which a soft flexible photocurable stent is delivered into the trachea or bronchi over a UV-transparent balloon. The balloon is expanded such that the stent conforms to the varying cross-sectional shape of the airways. UV light is then delivered through the balloon curing the stent into its expanded conformal shape. The potential of this method is demonstrated using phantom, ex vivo and in vivo experiments. This approach can produce stents providing equivalent airway support to those made from standard materials while providing a customized fit.

A flexible porous chiral auxetic tracheal stent with ciliated epithelium

Tracheal stent placement is a principal treatment for tracheobronchial stenosis, but complications such as mucus plugging, secondary stenosis, migration, and strong foreign body sensation remain unavoidable challenges. In this study, we designed a flexible porous chiral tracheal stent intended to reduce or overcome these complications. The stent was innovatively designed with a flexible tetrachiral and anti-tetrachiral hybrid structure as the frame and hollows filled with porous silicone sponge. Detailed finite element analysis (FEA) showed that the designed frame can maintain a Poisson's ratio that is negative or close to zero at up to 50% tensile strain. This contributes to improved airway ventilation and better resistance to migration during physiological activities such as respiration and neck movement. The preparation process combined indirect 3D printing with gas foaming and particulate leaching methods to efficiently fabricate the stent. The stent was then subjected to uniaxial tension and local radial compression tests, which indicated that it not only has the same desirable auxetic performance but also has flexibility similar to the native trachea. The porous sponge facilitated the adhesion of cells, allowed nutrient diffusion, and would prevent the ingrowth of granulation tissue. Furthermore, a ciliated tracheal epithelium similar to that of the native trachea was differentiated from normal human bronchial primary epithelial cells on the internal wall of the stent under air-liquid interface conditions. These results suggest that the designed stent has the potential for application in the treatment of tracheobronchial stenosis.

Pediatric bronchoscopy: recent advances and clinical challenges

Introduction: During the last 40 years equipment has been improved with smaller instruments and sufficient size working channels. This has ensured that bronchoscopy offers therapeutic and interventional options.Areas covered: We provide a review of recent advances and clinical challenges in pediatric bronchoscopy. This includes single-use bronchoscopes, endobronchial ultrasound, and cryoprobe. Bronchoscopy in persistent preschool wheezing and asthma is included. The indications for interventional bronchoscopy have amplified and included balloon dilatation, endoscopic intubation, the use of airway stents, whole lung lavage, closing of fistulas and air leak, as well as an update on removal of foreign bodies. Others include the use of laser and microdebrider in airway surgery. Experience with bronchoscope during the COVID-19 pandemic has been included in this review. PubMed was searched for articles on pediatric bronchoscopy, including rigid bronchoscopy as well as interventional bronchoscopy with a focus on reviewing literature in the past 5 years.Expert opinion: As the proficiency of pediatric interventional pulmonologists continues to grow more interventions are being performed. There is a scarcity of published evidence in this field. Courses for pediatric interventional bronchoscopy need to be developed. The COVID-19 experience resulted in safer bronchoscopy practice for all involved.

A new airway spiral stent designed to maintain airway architecture with an atraumatic removal after full epithelization-Research of feasibility and viability in canine patients with tracheomalacia

OBJECTIVE

Surgical management of tracheomalacia is a challenge, with current treatments still presenting numerous complications. In the field of veterinary medicine, this same pathology is present in a significant number of dogs. For this reason, we present an experimental clinical trial performed on canines with tracheobronchomalacia, using a new atraumatic removable tracheal spiral stent (SS). Both implantation procedure and clinical improvement have been analyzed in this study.

METHODS

In this study, four small dogs, a mean weight of 4.89 kg and body condition scores IV-V, were included. SS was implanted by two different surgical approaches. Image and clinical follow-up have been performed during 90 days. Symptoms were evaluated from 1 to 10 every week.

RESULTS

This study achieved 100% technical and clinical success. Median tracheal diameters were as follows: cervical 10.85 (3.3), inlet 7.75 (2.1), and carina 7.75 (1.9) mm, and length was 77.5 (26) mm. A 12 × 10 × 100-mm SS was implanted in all cases. Goose honk cough punctuation improved from 8 to 1; also, there were important changes in exercise intolerance, a mean weight loss of 8.76%. The values of modified Karnofsky scale varied from 50 (20) before surgery to 90 (10) after 30 days of surgery. Neither granuloma tissue nor fractures of the prosthesis was observed.

CONCLUSION

The results in dogs are promising, and a new therapeutic alternative seems to be available for veterinarian field. The similarity of this disease between dogs and newborns suggests that this SS design can also be useful for human trials.

Preclinical evaluation of a pediatric airway stent for tracheobronchomalacia

OBJECTIVES

We sought to demonstrate in an animal model that helical stents made from a nickel titanium alloy called nitinol (NiTi) and designed for malacic airways could be delivered and removed without significant trauma while minimally impeding mucus clearance during the period of implantation.

METHODS

Stents were delivered and removed from the tracheas of healthy 20 kg swine (n = 5) using tools designed to minimize trauma. In 4-week experiments, the stents were implanted on day 0, removed after 3 weeks, and swine were put to death after 4 weeks. Weekly bronchoscopies, radiographs, and mucus clearance examinations were performed in vivo. Hematoxylin and eosin staining and scanning electron microscopy imaging were used to evaluate foreign body response, tracheal tissue reaction, and damage and to measure unciliated regions.

RESULTS

In all in vivo experiments, the stent was implanted and removed atraumatically. Mucus clearance was maintained throughout the experiment period. Hematoxylin and eosin-stained slides showed that foreign body response and tracheal tissue damage were localized to the stented subsections. Tracheal tissue reaction and damage was further restricted to the epithelium and submucosal layers. Scanning electron microscopy imaging revealed that the cilia were absent only over the contact area between the trachea and the wire forming the helical stent.

CONCLUSIONS

Helical nitinol stents designed to provide radial support for malacic airways were well tolerated in a porcine model, providing for mucus clearance while also enabling atraumatic removal.