An Ellipsoidal Focused Ultrasound Transducer for Extend-focus Photoacoustic Microscopy

Complex amplitude encoding metalens realizing arbitrary ultrasonic needle beams

Extending the depth of focus is necessary in many scenarios. Recent progress in ultrasonic applications demands various kinds of foci and poses challenges to science and technologies. Here, we propose to connect individual foci forming an ultrasonic needle beam (UNB) through complex amplitude encoding with super-units. Two phase distributions are encoded into one metalens through super-units, which realizes a complex-amplitude modulation and achieve multifocal points in space. The performance of the metalens can be improved by adjusting the parameters of super-units. Both simulations and experiments have demonstrated that the metalens designed through the proposed method can efficiently produce single or twin UNBs. Our work has potential applications in biomedical treatment and imaging, remote communication, and nondestructive detection.

Transparent ultrasonic transducers based on relaxor ferroelectric crystals for advanced photoacoustic imaging

Photoacoustic imaging is a promising non-invasive functional imaging modality for fundamental research and clinical diagnosis. However, achieving capillary-level resolution, wide field-of-view, and high frame rates remains challenging. To address this, we propose a transparent ultrasonic transducer design using our developed transparent Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 crystals. Our fabrication technique incorporates quartz-glass-and-epoxy matching layers with low-resistance indium-tin-oxide electrodes through a brass-ring based structure, enabling a high frequency (28.5 MHz), wide bandwidth (78%), and enhanced pulse-echo sensitivity (2.5 V under 2-μJ pulse excitation). Our Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3-based transparent ultrasonic transducer demonstrates a four-fold enhancement in photoacoustic detection sensitivity when compared to the LiNbO3-based counterpart, leading to a 13 dB improvement of signal-to-noise ratio in microvascular photoacoustic imaging. This enables dynamic monitoring of mouse cerebral cortex microvasculature during seizures at 0.8 Hz frame rates over a 1.5 × 1.5 mm2 field-of-view. Our work paves the way for high-performance and compact photoacoustic imaging systems using advanced piezoelectric materials.

Advancing insights into in vivo meningeal lymphatic vessels with stereoscopic wide-field photoacoustic microscopy

Meningeal lymphatic vessels (mLVs) play a pivotal role in regulating metabolic waste from cerebrospinal fluid (CSF). However, the current limitations in field of view and resolution of existing imaging techniques impede understanding the stereoscopic morphology and dynamic behavior of mLVs in vivo. Here, we utilized dual-contrast functional photoacoustic microscopy to achieve wide-field intravital imaging of the lymphatic system, including mLVs and glymphatic pathways. The stereoscopic photoacoustic microscopy based on opto-acoustic confocal features has a depth imaging capability of 3.75 mm, facilitating differentiation between mLVs on the meninges and glymphatic pathways within the brain parenchyma. Subsequently, using this imaging technique, we were able to visualize the dynamic drainage of mLVs and identify a peak drainage period occurring around 20-40 min after injection, along with determining the flow direction from CSF to lymph nodes. Inspiringly, in the Alzheimer's disease (AD) mouse model, we observed that AD mice exhibit a ~ 70% reduction in drainage volume of mLVs compared to wild-type mice. With the development of AD, there is be continued decline in mLVs drainage volume. This finding clearly demonstrates that the AD mouse model has impaired CSF drainage. Our study opens up a horizon for understanding the brain's drainage mechanism and dissecting mLVs-associated neurological disorders.

Highly sensitive self-focused ultrasound transducer with a bionic back-reflector for multiscale-resolution photoacoustic microscopy

In this study, we designed a self-focused ultrasonic transducer made of polyvinylidene fluoride (PVDF). This transducer involves a back-reflector, which is modeled after tapetum lucidum in the eyes of some nocturnal animals. The bionic structure reflects the ultrasound, which passes through the PVDF membrane, back to PVDF and provides a second chance for the PVDF to convert the ultrasound to electric signals. This design increases the amount of ultrasound absorbed by the PVDF, thereby improving the detection sensitivity. Both ultrasonic and photoacoustic (PA) experiments were conduct to characterize the performance of the transducer. The results show that the fabricated transducer has a center frequency of 13.07 MHz, and a bandwidth of 96% at -6 dB. With an acoustic numerical aperture (NA) of 0.64, the transducer provides a lateral resolution of 140µm. Importantly, the bionic design improves the detection sensitivity of the transducer about 30%. Finally, we apply the fabricated transducer to optical-resolution (OR) and acoustic-resolution photoacoustic microscopy (AR-PAM) to achieve multiscale-resolution PA imaging. Imaging of the bamboo leaf and the leaf skeleton demonstrates that the proposed transducer can provide high spatial resolution, better imaging intensity and contrast. Therefore, the proposed transducer design will be useful to enhance the performance of multiscale-resolution PAM.

In vivo liver function reserve assessments in alcoholic liver disease by scalable photoacoustic imaging

We present a rapid and high-resolution photoacoustic imaging method for evaluating the liver function reserve (LFR). To validate its accuracy, we establish alcoholic liver disease (ALD) models and employ dual-wavelength spectral unmixing to assess oxygen metabolism. An empirical mathematical model fits the photoacoustic signals, obtaining liver metabolism curve and LFR parameters. Liver oxygen metabolism significantly drops in ALD with the emergence of abnormal hepatic lobular structure. ICG half-life remarkably extends from 241 to 568 s in ALD. A significant decline in LFR occurs in terminal region compared to central region, indicated by a 106.9 s delay in ICG half-life, likely due to hepatic artery and vein damage causing hypoxia and inadequate nutrition. Reduced glutathione repairs LFR with a 43% improvement by reducing alcohol-induced oxidative damage. Scalable photoacoustic imaging shows immense potential for assessing LFR in alcoholic-related diseases, providing assistance to early detection and management of liver disease.

A Review of High-Frequency Ultrasonic Transducers for Photoacoustic Imaging Applications

Photoacoustic imaging (PAI) is a new and rapidly growing hybrid biomedical imaging modality that combines the virtues of both optical and ultrasonic (US) imaging. The nature of the interaction between light and ultrasound waves allows PAI to make good use of the rich contrast produced by optics while retaining the imaging depths in US imaging. High-frequency US transducers are an important part of the PAI systems, used to detect the high-frequency and broad-bandwidth photoacoustic signals excited by the target tissues irradiated by short laser pulses. Advancement in high-frequency US transducer technology has influenced the boost of PAI to broad applications. Here, we present a review on high-frequency US transducer technologies for PAI applications, including advanced piezoelectric materials and representative transducers. In addition, we discuss the new challenges and directions facing the development of high-frequency US transducers for PAI applications.

Three dimensional confocal photoacoustic dermoscopy with an autofocusing sono-opto probe

Photoacoustic dermoscopy (PAD) is uniquely positioned for the diagnosis and assessment of dermatological conditions because of its ability to visualize optical absorption contrast in vivo in three dimensions. In this Letter, we developed a 3D confocal PAD (3D-CPAD) equipped with an autofocusing sono-opto probe to facilitate the reconstruction of high-spatial-resolution imaging of skin with multilaminate structures in depth direction. The autofocusing sono-opto probe integrated a 10-mm electrowetting-based varifocal lens to automatically control the acoustic and optical confocal length, and an annular ultrasonic detector with a mid-frequency of ~32.8 MHz is coaxially configured for receiving photoacoustic signals. Using this sono-opto probe, the acoustic and optical confocal length-shifting range from ~7 to 43 mm with high image contrast and spatial resolution in the 3D image reconstruction. Autofocusing property tests and 3D human skin in vivo imaging were carried out to demonstrate the imaging capability of the 3D-CPAD for potential clinical foreground in noninvasive biopsies of skin disease.