Integration of haptic virtual reality simulators in undergraduate dental curricula: A survey-based study in Gulf Cooperation Council countries

BACKGROUND

The integration of haptic simulators in contemporary dental education has been reported to improve students' hand-eye coordination and fine motor skills during pre-clinical education to facilitate a smooth transition to the clinical setting. The aim of this study was to assess the integration of haptic virtual reality simulation (HVRS) in undergraduate dental curricula in the Gulf Cooperation Council countries.

METHODS

All dental schools offering undergraduate dental programs in the Gulf Cooperation Council countries were invited to participate in this cross-sectional study design. Data was collected using an online survey on a voluntary basis and analyzed using Microsoft Excel.

RESULTS

Out of 34 dental schools, responses were received from 30 dental schools (response rate 88.2%). In terms of haptic integration, only two (6.7%) dental institutions have adopted haptic simulation in undergraduate dental education. However, a considerable proportion of schools (n = 13, 46.4%) expressed an interest in the future use of haptic technology. The key strengths of HRVS included the integration of modern technology, opportunities for self-directed learning, development and consolidation of manual skills, and boosting self-confidence amongst undergraduate dental students. Financial cost and limited patient cases in the HRVS library were regarded as the main barriers to widespread use of this technology.

CONCLUSION

Although the Gulf Cooperation Council countries have strong economies with a high gross domestic product (GDP), only a limited number of dental schools have incorporated haptic technology in their curricula. Nevertheless, a high proportion of dental schools in the region are actively considering purchasing and implementation of haptic devices in undergraduate dental programs.

Do Pre-Clinical Summative Assessments Predict a Student's Clinical Performance? A Retrospective Study

INTRODUCTION

Dental students are deemed fit to treat patients (clinical readiness) based on their performance in pre-clinical summative assessments. This involves assessing knowledge (theory exams) and technical skills (simulation-based activities). However, there is weak evidence to support whether these pre-clinical assessments accurately predict clinical performance. The aim of this study was to determine if pre-clinical summative assessments predicted the clinical performance of students in a graduate dental programme.

MATERIALS AND METHODS

This retrospective longitudinal cohort study analysed the results of pre-clinical (theory, simulation) and clinical summative assessments in Restorative Dentistry, Periodontics and Endodontics from six cohorts of second- and third-year students (2013 to 2019) enrolled in The University of Sydney's Doctor of Dental Medicine program. The association between pre-clinical (theory and simulation) marks with clinical marks were analysed by discipline using Pearson's correlation coefficient (r2).

RESULTS

A weak but significant positive correlation was found between a student's pre-clinical theory mark and their clinical performance in all three disciplines. The only significant positive correlation between pre-clinical simulation marks and clinical performance was found in Restorative Dentistry.

DISCUSSION

While some positive correlations were found between pre-clinical and clinical performance, overall, these results indicate that pre-clinical ability was not a reliable predictor of a student's clinical competence.

CONCLUSIONS

Assessing clinical readiness is complex. Our results indicate this attribute may potentially be better assessed using a range of qualitative and quantitative metrics. Further research is required to better define and quantify clinical readiness.

Benefits and challenges of the integration of haptics-enhanced virtual reality training within dental curricula

BACKGROUND

Haptics-enhanced virtual reality (VR-haptic) simulation in dental education has evolved considerably during the past decade, representing a promising resource of simulation-based training opportunities to support conventional practice. We aim to summarize current literature on the applications of VR-haptics in learning, practicing, and teaching dental education.

METHODS

A literature search was performed using PubMed, focusing on research articles published between January 2010 and January 2024. Out of the 667 articles that matched the search terms (dentistry, education, haptic, teaching, training, virtual reality), 105 were screened, and 42 were eligible for full-text reading and utilization. Findings from an ongoing educator survey on the use of VR-haptics in dental education have also been provided.

RESULTS

VR-haptic simulation has been shown to have a supportive role in dental simulation practice. Despite training within a digital world, hand skill transfer to the real world has been demonstrated, which affords educators more flexibility in how to train their students before and during traditional preclinical and clinical practical education. The individualized VR-haptic training and feedback help students in mastering essential working techniques, while also increasing engagement and motivation.

CONCLUSIONS

VR-haptics-supported dental education can help students effectively address challenges during their preclinical and clinical training, as well as in their subsequent careers, and it may help mitigate some weaknesses of the current educational system. Validation is a key factor for the acceptance of VR-haptic simulators; thus, further research and verification are needed before VR-haptics could be considered a primary hand skill development method of learning in dental education. VR-haptic simulation may in the future be used as an assessment tool for the students' and clinicians' credentialing process.

O-Health-Edu: A viewpoint into the current state of oral health professional education in Europe: Part 2: Curriculum structure, facilities, staffing and quality assurance

INTRODUCTION

Oral health professional (OHP) education is likely to vary across Europe in accordance with an EU directive that is open to broad interpretation. It is not clear how OHP curricula are structured or delivered across Europe. The objectives of Part 2 of this paper series are: (i) to provide an overview of common practices in curriculum structure, the availability of facilities, staffing (faculty) and quality assurance processes and (ii) to consider how the existing programme structures align to stakeholder guidance documents.

METHODS

A total of 27 questions from a 91-item questionnaire were used for this manuscript. The questionnaire was developed following the Delphi method to establish consensus from a group of experts. Members of the research team and colleagues from other countries in Europe completed a multi-step piloting process. An online data hub was created to allow the respondents to be data controllers and respond to the questionnaire. ADEE member schools (n = 144) were invited to provide data.

RESULTS

Totally, 71 institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Data on curriculum approaches, teaching methods, integration of topics of interest, clinical education, staff-student ratios, access to facilities and new technologies, teaching staff (faculty) and quality assurance processes are presented for Primary Dental Degree Programmes.

CONCLUSION

To the best of our knowledge, this series of papers are the first attempts to provide a comprehensive overview of OHP education in Europe. Results showed that the majority of European dental programmes are engaged in providing innovative and scientifically grounded education in order to develop quality future OHPs. Nevertheless, significant variability in the delivery of clinical education across the European OHP schools was notable in this dataset. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

Mapping the Terrain of Faculty Development for Simulation: A Scoping Review

ABSTRACT

Understanding what interventions and approaches are currently being used to improve the knowledge, skills, and effectiveness of instructors in simulation-based education is an integral step for carving out the future of simulation. The current study is a scoping review on the topic, to uncover what is known about faculty development for simulation-based education.We screened 3259 abstracts and included 35 studies in this scoping review. Our findings reveal a clear image that the landscape of faculty development in simulation is widely diverse, revealing an array of foundations, terrains, and peaks even within the same zone of focus. As the field of faculty development in simulation continues to mature, we would hope that greater continuity and cohesiveness across the literature would continue to grow as well. Recommendations provided here may help provide the pathway toward that aim.

Scaffolding competence-based learning design in the dental simulation curriculum

INTRODUCTION

Learning in a clinical domain in dentistry is complex and learners may face uncertain clinical scenarios. A simulation curriculum can be designed to have simple clinical scenarios and learning activities which progress in complexity and employ competence assessments of simulated clinical practice before students can undertake authentic practice on patients. This paper presents how scaffolding of competence can be used for designing learning with simulators (haptics and phantom head) demonstrated in a specific domain in restorative dentistry.

METHODS

A collaborative workshop as a research approach was undertaken to inform the iterative analysis, development, and discussion on scaffolding the learning design with respect to competence assessments of learning cavity preparation with simulation-based learning technologies. A workshop was conducted, which was collaborative and involved design negotiations between researchers, technologists, and teachers/practitioners in developing the simulation curriculum.

RESULTS

A competence assessment with feedback in a specific domain in preparing interproximal caries was used as a context to describe how the learning activities and outcomes were designed to meet assessment of competence with varied levels of simple to complex learning activities and structured sessions.

CONCLUSION

Simulation curriculum can be designed and implemented by scaffolding the level of competence that can be learned using simulation between haptics and phantom-head. This brings impetus to the need in meeting the relevant competence criteria in context to a specific affordance of the simulation-based learning technologies to provide optimal patient-centred holistic care.

Virtual reality and haptics in dental education: Implementation progress and lessons learned after a decade

INTRODUCTION

The search for alternative training environments in dentistry responded mainly to scarcity and lack of standardisation of training material and non-availability of specific clinical procedures. The development of haptic virtual reality (VR) dental trainers provides a platform where irreversible procedures can be safely and unlimitedly practised. The aim of this study was to assess the educational implementation of these devices and evaluate schools' satisfaction.

METHODS

Dental schools that were using haptic VR dental trainers, were approached. The Dental Trainer User Inventory (DTUI), addressing the educational implementation and users' satisfaction, was developed and distributed.

RESULTS

Twenty-seven schools completed the DTUI. The total number of VR dental trainers available varied from one to 42 devices with a mean of 7 devices. The dental trainer was mostly made available from the first year (63.0%) of the undergraduate program, but it was mostly integrated into the curriculum by the third year (70.4%). Curricular integration was reported by 18 schools (66.7%), while nine schools (33.3%) indicated that they had not yet achieved integration. Twenty-one schools (69.4%) were 'satisfied' or 'very satisfied' with the devices, while two schools (7.4%) were dissatisfied and six schools (22.2%) were neither satisfied nor dissatisfied.

CONCLUSION

VR haptic dental trainers are implemented in multiple dental programs and are also being used for educational research and clinical training. Even though curricular changes and teachers' acceptance remain a challenge, most schools are satisfied with VR haptic dental trainers and would recommend the device to other schools.

Haptic and Force Feedback Technology in Dental Education: A Bibliometric Analysis

The haptic and force feedback technology has received an increasing attention in dental schools due to its effectiveness in psychomotor skill training. However, the bibliometric analysis on haptic and force feedback technology in dental education is still scarce. Therefore, the aim of this study was to perform a bibliometric analysis of the development of haptic and force feedback technology and its changing trends in dental education. From 1 January 2001 to 30 November 2022, all papers published on haptic and force feedback technology were searched from the Web of Science Core Collection database. These data were then entered into Apple Numbers for descriptive bibliometric analysis and visualized using VOSviewer software. A total of 85 articles were retrieved following the inclusive and exclusive criteria. The results demonstrated that USA and China exhibited the most publications. The combination of correspondence author and author co-citation analysis identified the more prominent authors in this research field. The top-cited and the average citation count per year ranking led to different views of popularity. A significant increase in the number of haptic and force feedback technology publications were found in the last two years. Virtual reality is the main keyword that indicates more new integrative applications currently underway. Taken together, this study provides a detailed bibliographic analysis of haptic and force feedback technology in dental education to indicate representative authors, literatures, keywords, and trends. These detailed data will help researchers, teachers, and dental students as a very useful information when trying to make haptic and force feedback technology more prevalent in dental education in the near further.

3-Dimensional simulations and student learning in orthodontic education

INTRODUCTION

The electronic dental model (e-model) is an example of a digital 3-dimensional technology to support inquiry-based learning in undergraduate dental education. As student perceptions of and engagement with e-models vary, it is uncertain whether these perceptions have implications for their learning processes and outcomes.

MATERIALS AND METHODS

Third-year dental students (N = 40) completed a questionnaire to identify their perceptions of and preferences for model modalities. They were divided into three groups based on their preference: Preferring plaster models (Group 1); Preferring e-models (Group 2); No preference (Group 3). Students from three groups (N = 9) attended a hands-on digital occlusion evaluation workshop, and then completed a case-based diagnostic evaluation test using digital occlusion evaluation software. Camtasia Studio™ recorded real-time and on-screen data of the number of mouse-clicks and time spent.

RESULTS

Students reported positive feedbacks on the use of e-models, and 72.5% of the students preferred combination use of e-models and plaster models. After attending the hands-on digital dental occlusion evaluation workshop, Group 2 scored higher on the diagnostic evaluation test (p < .05) and registered more mouse-clicks than Group 1 when evaluating the arch symmetry (p < .05). Group 2 registered fewer mouse-clicks than Group 3 during tooth size measurement (p < .05). There was no significant difference regarding the time used to answer the knowledge questions amongst the three groups.

CONCLUSION

Undergraduate dental students indicated a generally high acceptance of e-models for their learning in orthodontics, and more prefer a blended approach. Students preferring e-models presented higher performance outcomes, which supports cognitive load theory regarding prior exposure to simulation-based environments.

A conceptual model for clinical psychomotor skill development in an era of simulated and virtual reality

Psychomotor skill development is central to a beginner practitioner's learning pathway. Curriculum constraints around time, access to facilities and resources in health professions education have prompted the growth in alternative approaches to clinical skill development in both simulation and direct patient care. Among these is the increased incorporation of virtual reality (VR) systems with haptic feedback alongside traditional, solid simulations. Given the rapid growth in the adoption of technological affordances to support skill development, it is cogent to pause and examine whether the underpinning concepts regarding psychomotor skill development that have driven much of the approaches to teach clinical skill acquisition in dentistry remain fit-for-purpose. This conceptual paper proposes a new taxonomy for clinical simulation psychomotor skill development in the era of increasing variety of simulation modalities.

Meta-Analysis of Prevalence of Depression in Dental Students during COVID-19 Pandemic

Background and Objectives: The COVID-19 pandemic has a negative impact on the mental health of the population in general, and in college students in particular. Dental students have seen their teaching altered and their clinical practice reduced. This study was aimed at conducting a systematic review and meta-analysis of studies reporting levels of depression among dental students during the COVID-19 and estimating the pooled prevalence of depression. Materials and Methods: Medline via PubMed and other databases were searched for studies on the prevalence of depression in dental undergraduates, published from 1 December 2019 to 1 September 2021. The pooled proportions of depression were calculated with random effects models. Results: We identified 13 studies from 9 countries. The pooled prevalence of depression in dental students was 37% (95% CI: 26-49%) with no variation due to gender, response rate or methodological quality. We only found a significantly higher prevalence of depression in studies from Asia compared to Europe and America. Conclusions: Our results suggest that dental students are suffering from higher levels of depression compared with the general population or other college students during the COVID-19 pandemic, with differences across regions. Measures to improve mental health and wellbeing of dental students during the pandemic are needed.

Significance of Haptic and Virtual Reality Simulation (VRS) in the Dental Education: A Review of Literature

The significance of haptic and virtual reality (VR) has been acknowledged by eminent dental professionals and has transformed dental teaching in the modern dental world. With this novel technological concept, students can interact with digital simulation on the screen and learn treatment skills before transferring them to real situations. This is helpful for gaining skills confidence, revising exercises again and again without the waste of materials, and for student assessment controlled by a teacher or tutor. It is a promising technology to enhance dental education for the new era of post COVID-19 practice due to noncontact patient training environments. It can create a safe learning environment for the teacher and learner or participant. The prospect of this literature review is to highlight the significance and clinical applications of virtual reality and simulations in undergraduate dental education.

Prevalence of Anxiety in Dental Students during the COVID-19 Outbreak: A Meta-Analysis

Background: Since the onset of the COVID-19 pandemic, the psychological state of university students has been a cause for concern. In particular, odontology students have experienced symptoms of anxiety due to the closure of universities and the suspension of clinical training. Methods: Medline via PubMed was searched for studies on the prevalence of anxiety in dental undergraduates, published from 1 December 2019 to 1 August 2021. Results: A total of fifteen studies were included in this review. Our results show a prevalence of anxiety of 35% reported by dental students, which was independent of gender, response rate or methodological quality. The only significant finding was a lower prevalence of anxiety in studies located in Europe compared to those located in other continents. Conclusions: The results suggest dental students are experiencing significant levels of anxiety during this COVID-19 pandemic and that there seem to be differences between students from different regions of the world. Therefore, it is important to help dental students psychologically as the pandemic situation continues.

The utility of haptic simulation in early restorative dental training: A scoping review

BACKGROUND

Haptic dental simulators are becoming increasingly available in dental schools around the world; however, there is a paucity of evidence on their pedagogical effectiveness particularly in early dental training for the acquisition of the highly specific fine motor dental skills.

METHODS

A scoping review was performed to broadly map the available evidence and to detect knowledge gaps on the utility of haptic dental simulation in early dental training. The review is reported using the PRISMA-ScR guidelines. Eight bibliographic databases were searched: Web of Science, Scopus, MEDLINE via PubMed, Cochrane library, CENTRAL, ERIC, IEEE Xplore, and TRIP. Charted data were reported by clustering results according to study characteristics, research themes, research purpose, and type of validity evidence identified.

RESULTS

The review process resulted in the inclusion of 36 studies published between 2009 and 2020. The majority of the studies were cross-sectional in design with short-term evaluation data. Of the studies included, 64% investigated commercially available haptic simulators, while 36% investigated experimental haptic simulators. The research themes identified were skill acquisition and transfer, task-specific haptic training, trainee level discrimination, feedback, subjective user evaluation, performance prediction, and human factors in haptic training.

CONCLUSION

Short-term evaluation evidence from reviewed studies indicates the usefulness of the haptic simulators in early dental training. They complement the existing phantom head simulators by offering qualitatively different features. Further empirical research is needed to investigate the long-term impact of training with haptic dental simulators, to improve the availability of validation evidence and to enhance the results generalizability.

Simulation design and students' satisfaction with home-based simulation learning in oral health therapy

OBJECTIVES

The COVID-19 pandemic presents a challenging situation for dental education, with school closures worldwide. While practical sessions are important for the acquisition of clinical skills, few studies have examined the role of home-based simulation learning (HBSL). This study aims to identify key aspects of simulation design and factors associated with students' satisfaction with HBSL.

METHODS

During a "circuit-breaker" period in Singapore, the Nanyang Polytechnic School of Health & Social Sciences (Oral Health Therapy) distributed portable manikins and instruments to students and staff for use at home. Synchronous teaching sessions with real-time feedback were carried out over the Zoom teleconferencing platform. A cross-sectional survey of students was conducted after 3 weeks of the HBSL program. Multiple linear regression analyses were carried out to assess the association between satisfaction with domains of simulation design and overall satisfaction with HBSL.

RESULTS

The top three factors of importance to students in HBSL were feedback and guided reflection, support, and objectives and information. Final-year students expressed higher levels of overall satisfaction and self-confidence following HBSL than first-year students. Satisfaction with the objectives (β = 0.42, 95% CI 0.26-0.57), support (β = 0.27, 95% CI 0.11-0.42), and problem-solving (β = 0.28, 95% CI 0.10-0.46) domains in the Simulation Design Scale were positively associated with overall student satisfaction and self-confidence in learning.

CONCLUSION

The findings can aid educators in the design of future HBSL programs, with a focus on areas of simulation design that are of importance to students.

Analysis of Confidence Levels and Application Success Rates in Simulator-Based Dental Anesthesia Education Among Undergraduate Dental Students

PURPOSE

We investigated the confidence levels of undergraduate dental students who used dental anesthesia simulators and patient reports of undergraduate dental students' confidence levels in delivering anesthesia injections, in comparison with undergraduate dental students who did not use dental anesthesia simulators. We also investigated application success rates.

MATERIALS AND METHODS

The study was carried out in the dental anesthesia simulator laboratory and in the faculty clinics of the Faculty of Dentistry of Ankara University. One-hundred volunteer undergraduate dental students who had completed the third year of the 5-year undergraduate education program and who had not performed local anesthesia on a patient participated in the study. Seventy and 30 undergraduate dental students did and did not receive training on dental anesthesia simulators, respectively, before performing procedures on patients. Using a questionnaire, undergraduate dental students conducted a self-assessment of preparedness and confidence, educators assessed the application success rates, and patients evaluated the undergraduate dental students' confidence levels.

RESULTS

Patients reported that the undergraduate dental students trained using the simulators were more confident. The self-reported confidence and success rates in providing anesthesia did not differ significantly as per the use of dental anesthesia simulators.

CONCLUSIONS

Although use of simulators did not enhance self-reported confidence, patients reported that undergraduate dental students who used the simulators were more confident and reassuring. Use of simulators did not increase the undergraduate dental students' self-reported confidence or preparedness. However, we recommend using such simulators to overcome the ethical and moral issues associated with other teaching methods.

Can an interactive case-based activity help bridge the theory-practice gap in operative dentistry?

INTRODUCTION

A theory-practice gap in pre-doctoral dental education is a common source of stress for dental students. An interactive, small-group, case-based activity was designed to bridge the gap between pre-clinical and clinical experiences. The aim of our study was to assess the effectiveness of the case-based activity by evaluating students' comfort level in operative procedures.

MATERIALS AND METHODS

Over 5 years, a total of 172 second-year students from the classes of 2017 through 2021 participated in the case-based activity delivered after the completion of the core operative dentistry course. The exercise included a pre-activity online quiz, an in-class case-based session and a laboratory exercise. Students' self-reported comfort levels in performing operative procedures were collected by surveys at three different times. They included the post-course survey distributed after the completion of the core operative dentistry course, the post-activity survey distributed after the completion of the case-based activity, and the follow-up survey distributed after students completed their first operative procedures in clinic.

RESULTS

There was a 93% response rate. The average rating of all eight statements revealed statistically significant increase in students' comfort level after completing the case-based activity and after performing their first operative procedures in the teaching practice.

CONCLUSION

This observation suggests that the case-based activity was effective in raising students' comfort levels. The activity may serve as an important tool in bridging the theory-practice gap between pre-clinical and clinical operative experiences.

Re-defining the virtual reality dental simulator: Demonstrating concurrent validity of clinically relevant assessment and feedback

INTRODUCTION

Virtual reality (VR) dental simulators are gaining momentum as a useful tool to educate dental students. To date, no VR dental simulator exercise has been designed which is capable of reliably providing validated, meaningful clinical feedback to dental students. This study aims to measure the concurrent validity of the assessment and the provision of qualitative feedback, pertaining to cavity preparations by VR dental simulators.

METHODS

A cavity preparation exercise was created on a VR dental simulator, and assessment criteria for cavity preparations were developed. The exercise was performed 10 times in order to demonstrate a range of performances, and for each, the simulator feedback was recorded. The exercises were subsequently three-dimensionally printed, and 12 clinical teachers were asked to assess the preparations according to the same criteria. Inter-rater reliability (IRR) between clinical teachers was measured using a free-marginal multirater kappa value. Clinical teacher assessment responses were compared with the VR simulator responses and percentage agreements calculated.

RESULTS

IRR values for each exercise ranged from 0.39 to 0.77 (69.39%-88.48%). The assessment of smoothness (κfree 0.58, 78.79%) and ability to follow the outline (κfree 0.56, 77.88%) demonstrated highest agreement between clinical teachers, whilst the assessment of undercut (κfree 0.15, 57.58%) and depth (κfree 0.28, 64.09%) had the lowest agreement. The modal percentage agreement between clinical teachers and the VR simulator was, on average, 78% across all exercises.

CONCLUSION

The results of this study demonstrate that it is possible to provide reliable and clinically relevant qualitative feedback via a VR dental simulator. Further research should look to employ this technique across a broader range of exercises that help to develop other complex operative dental skills.

O-HEALTH-EDU: A scoping review on the reporting of oral health professional education in Europe

INTRODUCTION

The variability in oral health professional education is likely to impact on the management of oral health needs across Europe. This scoping review forms the initial part of a larger EU-funded collaborative Erasmus + project, 'O-Health-Edu'. The aim of this scoping review is to investigate how oral health professional education in Europe is reported.

METHODS

The PRISMA and Arksey & O'Malley methodological frameworks for scoping reviews were used to guide reviewers in answering the research question "How is oral health professional education reported in Europe?". The search strategy encompassed published literature searches, internet searches and further searching of relevant documents from educational organisations, regulators and professional bodies. Once the search strategy was developed, it was sent to key stakeholders for consultation. Sources were reviewed by two authors (JD, JF) and included in the review if they reported on oral health professional education in Europe.

RESULTS

A total of 508 sources were retrieved from all of the searches. A total of 405 sources were excluded as they did not report on the topic of interest, leaving 103 sources that reported on oral health professional education in Europe. Handsearching the references of published sources lead to a further 41 sources being screened, of which, 15 were included. In total, 33 duplications were removed and the final number of included sources was 85. The average year of publication for the included sources was 2007, with sources most commonly published in journals dedicated to dental education. Surveys represented the most common form of reporting. From the data obtained, four broad themes of reporting were evident: dental education at a programme level, dental education at a discipline level, other oral health professional education, and postgraduate education and continuous professional development.

CONCLUSION

The reporting of dental and oral health professional education in Europe is limited. Whilst there are many useful documents that provide guidelines on dental education, there is limited knowledge on how education is implemented and delivered. There is a greater need for comprehensive educationally driven programme-level data on oral health professional education across Europe.

Psychometric analysis of a measure of acceptance of new technologies (UTAUT), applied to the use of haptic virtual simulators in dental students

BACKGROUND

The aims of this study are (a) to assess the psychometric quality of an instrument of acceptance of new technologies adapted from the UTAUT model, (b) to validate the UTAUT model as a valid measure to be applied in dental education, and (c) to determine which factors of the UTAUT model predict the behavioural intention of using a haptic virtual simulator (HVS).

METHODS

A cross-sectional design study with a sample of 265 dentistry students was carried out.

RESULTS

Using structural equation modelling, confirmatory factor analysis verified the adequacy of four-factor model, although the only factor that directly predicts behavioural intention is performance expectancy. Internal consistency coefficients of each factor ranged from 0.800 to 0.969.

DISCUSSION

These findings, as well as the predictive power of performance expectancy on behaviour intention, are in line with previous evidence found in the literature.

CONCLUSION

These findings suggest that the UTAUT scale has adequate reliability and construct factorial validity; therefore, UTAUT model could be a valuable approach to assess haptic virtual simulator acceptance in dental education.

Balancing assessment of depth and breadth in the dental curriculum: A bi-dimensional assessment strategy

Introduction

Integrated curricula are being increasingly adopted in health professions, owing to their advantages including patient-centred training and development of critical thinking. Similarly, the majority of dental Universities have either moved away from discipline-specific towards integrated curricula or have incorporated elements of integration. Despite several advantages offered by the integrated curriculum, one disadvantage is failure to assess depth of knowledge. Assessing the depth of knowledge is a characteristic of discipline-specific curriculum. This commentary describes the inclusion of both discipline-based and integrated assessments at Faculty of Dentistry, SEGi University, Malaysia.

Material and methods

Module tests (discipline-based assessments) comprising of discipline specific questions are conducted at the end of every term, mimicking the traditional discipline-specific assessment. Questions in the module tests are intended to assess the depth of knowledge of students. Mid semester examinations are conducted at the end of the semester, mimicking the integrated assessment. Integrated questions are intended to test the breadth of knowledge of students.

Results

Lecturers and students felt introduction of module tests, helped them to prepare for topics in a phased manner and better answer questions posed by lecturers during case discussions and clinical presentations. The 'borderline distinction' students felt that studying for module tests provided them with the depth of knowledge essential to answer questions during viva voce.

Discussion

Including both the traditional and integrated methods of assessments would engage students in a learning experience developing their breadth and depth of knowledge. Further prospective research is essential to assess the impact of this assessment strategy.

Measuring the impact of simulation practice on the spatial representation ability of dentists by means of Impacted Mandibular Third Molar (IMTM) Surgery on 3D printed models

INTRODUCTION

The ability of spatial representation is one of the most important competences of an oral surgeon, but also a challenging competence to assess in educational settings. The aim of this pilot study was to investigate the impact of a hands-on simulation practice on the development of the Dental Anatomy Spatial Representation Ability (DASRA) of recent dental graduates, using a novel assessment instrument based on CBCT radiographic data.

MATERIALS AND METHODS

A novel instrument for the measurement of DASRA for oral surgery was developed, utilising panoramic, sagittal and horizontal slices from 3D radiographic imaging of impacted wisdom teeth. Twenty-one young dentists (nine males and 12 females) were enrolled in this study. After measurement of dentists' perceptual ability (PA), all dentists completed a DASRA drawing test and thereafter practiced surgical extraction on 3D printed models, which were based on actual patients' anatomy. A second DASRA was administered after the hands-on exercise, followed by a feedback survey.

RESULTS

A slight increase in DASRA scores was revealed after practicing on models, which however did not reach statistical significance. However, statistically significant decrease in drawing time was observed after hands-on experiences (P < 0.001), while important qualitative improvements were noted, such as dentists' ability to position the mandibular nerve. Dentists perceived 3D printed model as a very effective and efficient manner in planning and practicing of surgical interventions.

CONCLUSIONS

An instrument for the measurement of DASRA based on 3D radiographic imaging might support educators in the assessment of spatial skills of novice surgeons. Practice on 3D printed, anatomically precise models can benefit dentists on pre-clinical surgical training and has the potential of improving their dental anatomy spatial representation ability.

Development and Assessment of a Three-Dimensional Tooth Morphology Quiz for Dental Students

Tooth morphology has a pivotal role in the dental curriculum and provides one of the important foundations of clinical practice. To supplement tooth morphology teaching a three-dimensional (3D) quiz application (app) was developed. The 3D resource enables students to study tooth morphology actively by selecting teeth from an interactive quiz, modify their viewpoint and level of zoom. Additionally, students are able to rotate the tooth to obtain a 3D spatial understanding of the different surfaces of the tooth. A cross-over study was designed to allow comparison of students' results after studying with the new application or traditionally with extracted/model teeth. Data show that the app provides an efficient learning tool and that students' scores improve with usage (18% increase over three weeks, P < 0.001). Data also show that student assessment scores were correlated with scores obtained while using the app but were not influenced by the teaching modality initially accessed (r²  = 0.175, P < 0.01). Comparison of the 2016 and 2017 class performance shows that the class that had access to the app performed significantly better on their final tooth morphology assessment (68.0% ±15.0 vs. 75.3% ±13.4, P < 0.01). Furthermore, students reported that the 3D application was intuitive, provided useful feedback, presented the key features of the teeth, and assisted in learning tooth morphology. The 3D tooth morphology app thus provides students with a useful adjunct teaching tool for learning dental anatomy. Anat Sci Educ 00: 000-000. © 2018 American Association of Anatomists.