Standardisation of allergen products: 4. Validation of a candidate European Pharmacopoeia standard method for quantification of major grass pollen allergen Phl p 5

Novel monoclonal antibodies against house dust mite allergen Der p 21 and their application to analyze allergen extracts

Background

Allergen extracts and recombinant allergens are used in allergy diagnostics and immunotherapy. Since allergen extracts from different manufacturers lack proper standardization regarding their composition, monoclonal antibodies (MAbs) against specific allergen components can be used for their identification and quantification in allergen extracts. This study aimed to generate MAbs against allergen Der p 21 of Dermatophagoides pteronyssinus for the analysis of allergen extracts.

Methods

Recombinant Der p 21 was expressed in E. coli and purified using affinity chromatography. MAbs against Der p 21 were generated using hybridoma technology. House dust mite (HDM) allergen extracts were analyzed using the newly developed sandwich enzyme-linked immunosorbent assay, Western blotting and microarray immunoassay.

Results

MAbs raised against recombinant Der p 21 were characterized in detail and proven to be reactive with natural Der p 21. Highly specific sandwich enzyme-linked immunosorbent assay for the quantification of Der p 21 was developed and optimized. The allergen was detected and its concentration was determined in only three of six analyzed HDM allergen extracts from different manufacturers.

Conclusion

HDM analysis by MAb-based immunoassays shows their differences in allergen composition. The results demonstrate the importance of allergen-specific MAbs as a tool for the characterization of allergen extracts and the need for their appropriate standardization before their use for allergy diagnostics or immunotherapy.

Quality control of allergen products with mass spectrometry part I: Positioning within the EU regulatory framework

Mass spectrometry (MS) has advanced greatly and many of its applications are ready for utilization within regulatory procedures and could significantly contribute to overcome challenges in standardization of allergen products. It seems sensible to discuss MS within the regulatory framework, before addressing technical questions. While the application to purified proteins is well established from product development to manufacturer's release analytics, its application to complex products such as allergen products is still under development. It needs to be determined where it can complement or replace established methods or where MS offers limited improvement. Despite its technical appeal and versatility, currently MS is mentioned in regulatory guidelines only as one possible measurement method. For example, no specific MS method is given in the European Pharmacopoeia. We discuss applications of MS within the EU regulatory framework. This includes their advantages and disadvantages and their positioning between research, characterization, manufacturer's release analytics and official batch testing. We discuss the qualitative detection of single and multiple allergens as proof of identity, qualitative to semi-quantitative protein profiles for batch to batch consistency testing, and quantification of allergens to state mass units of allergens. MS may also facilitate standardization of allergen products, reference products and reference standards.

The Art of Dosing for Subcutaneous Immunotherapy in North America

Subcutaneous immunotherapy (SCIT) is a long-established treatment option for allergic rhinoconjunctivitis. Proper dosing of the allergens is critical for the efficacy and safety of SCIT. Of the hundreds of liquid allergen extracts in the United States, effective and well-tolerated SCIT dosing has only been established for a small number. Thus, SCIT dosing remains largely empiric and continues to be, by necessity, an art. To highlight the complexity of SCIT dosing, this review summarizes the historical and current landscape of U.S. allergen extracts, differences among U.S. and European allergen extracts, allergen selection for SCIT, considerations for compounding of allergen extract mixtures, and recommended dosing. As of 2021, 18 standardized allergen extracts are available in the United States; all other extracts remain unstandardized without characterization of allergen content or potency. U.S. allergen extracts differ from European extracts in formulation and potency characterization. There is no standardized methodology for SCIT allergen selection, and interpretation of allergen sensitization is not straightforward. Compounding of SCIT mixtures requires consideration of potential dilution effects, allergen cross-reactivity, proteolytic activity, and additives. Probable effective dose ranges for SCIT are recommended in U.S. allergy immunotherapy practice parameters, although there are few studies using U.S. extracts supporting these doses as therapeutic. In contrast, optimized doses of sublingual immunotherapy tablets have been confirmed in North American phase 3 trials. The SCIT dosing for each patient remains an art that requires clinical experience and consideration of polysensitization, tolerability, compounding of allergen extract mixtures, and the range of recommended doses within the context of extract potency variability.

EAACI Molecular Allergology User's Guide 2.0

Since the discovery of immunoglobulin E (IgE) as a mediator of allergic diseases in 1967, our knowledge about the immunological mechanisms of IgE-mediated allergies has remarkably increased. In addition to understanding the immune response and clinical symptoms, allergy diagnosis and management depend strongly on the precise identification of the elicitors of the IgE-mediated allergic reaction. In the past four decades, innovations in bioscience and technology have facilitated the identification and production of well-defined, highly pure molecules for component-resolved diagnosis (CRD), allowing a personalized diagnosis and management of the allergic disease for individual patients. The first edition of the "EAACI Molecular Allergology User's Guide" (MAUG) in 2016 rapidly became a key reference for clinicians, scientists, and interested readers with a background in allergology, immunology, biology, and medicine. Nevertheless, the field of molecular allergology is moving fast, and after 6 years, a new EAACI Taskforce was established to provide an updated document. The Molecular Allergology User's Guide 2.0 summarizes state-of-the-art information on allergen molecules, their clinical relevance, and their application in diagnostic algorithms for clinical practice. It is designed for both, clinicians and scientists, guiding health care professionals through the overwhelming list of different allergen molecules available for testing. Further, it provides diagnostic algorithms on the clinical relevance of allergenic molecules and gives an overview of their biology, the basic mechanisms of test formats, and the application of tests to measure allergen exposure.

Introduction of General Chapters on standard methods for allergen quantification in the European Pharmacopoeia

The Biological Standardization Project BSP090 has been successfully concluded in 2021. As a result, two standard methods for quantification of the major allergens Bet v 1 and Phl p 5 will be implemented in the European Pharmacopoeia (Ph. Eur.). The General Chapter describing the protocol of the respective Bet v 1-specific ELISA has already been adopted by the Ph. Eur. Commission and will become an official part of the Ph. Eur. in the beginning of 2023. As this will be the first allergen-specific standard method in the EU, this paper intends to summarize the preceding process and outline the measures necessary to comply with the new regulatory requirement.

Identification of Potentially Tolerated Fish Species by Multiplex IgE Testing of a Multinational Fish-Allergic Patient Cohort

BACKGROUND

Although recent studies indicated that many fish-allergic patients may safely consume certain fish species, no clinical guidelines are available for identification of the exact species tolerated by specific patients.

OBJECTIVE

To investigate whether multiplex immunoglobulin E (IgE) testing reveals potentially tolerated fish through absence of IgE to parvalbumin (PV) and extracts from specific species.

METHODS

Sera from 263 clinically well-defined fish-allergic patients from Austria, China, Denmark, Luxembourg, Norway, and Spain were used in a research version of the ALEX² multiplex IgE quantification assay. Specific IgE to PVs from 10 fish species (9 bony and 1 cartilaginous), and to extracts from 7 species was quantified. The IgE signatures of individual patients and patient groups were analyzed using SPSS and R.

RESULTS

Up to 38% of the patients were negative to cod PV, the most commonly used molecule in fish allergy diagnosis. Forty-five patients (17%) tested negative to PVs but positive to the respective fish extracts, underlining the requirement for extracts for accurate diagnosis. Between 60% (Spain) and 90% (Luxembourg) of the patients were negative to PV and extracts from ray, a cartilaginous fish, indicating its potential tolerance. Up to 21% of the patients were negative to at least 1 bony fish species. Of the species analyzed, negativity to mackerel emerged as the best predictive marker of negativity to additional bony fish, such as herring and swordfish.

CONCLUSIONS

Parvalbumins and extracts from multiple fish species relevant for consumption should be used in fish-allergy diagnosis, which may help identify potentially tolerated species for individual patients.

Simultaneous quantification of specific food allergen proteins using a fluorescent multiplex array

The aim was to develop a fluorescent multiplex array for simultaneously measuring regulated food allergens using specific allergen protein molecules from peanut, tree nut, cow's milk, egg, soy, fish, shellfish, sesame, mustard and celery. Microspheres coupled to specific monoclonal antibodies were used for allergen detection, with purified allergens as reference standards.Standard curves for 17 allergens covered a 5-log dynamic range. Intra- and inter-assay acceptance criteria were within 70-130% recovery and a CV of ≤15%. Food reference materials contained high levels of their respective major allergens (2000-175,000 µg/g), Similar high allergen levels were found in 10 selected foods analysed using a 9-plex array. Egg, milk, peanut, hazelnut and walnut allergens were detectable in chocolate bars with incurred allergens at 3, 10, 30, and 100 ppm. The multiplex array is an efficient tool for measuring specific food allergens, with applications for risk assessment and standardization of therapeutic products for food allergy.

Absolute quantification of Bet v 1 in birch polymerized allergenic extracts via mass spectrometry-targeted analysis

BACKGROUND

Quantifying major allergens is essential for evaluating the quality and efficacy of allergenic extracts. They are usually measured in non-polymerized extracts using immunoassays. However, the direct measurement of allergens in allergoids is currently not supported. This study set out to develop a method for quantifying Bet v 1 in polymerized birch extracts using mass spectrometry-based targeted analysis.

METHODS

Three isotopically labelled peptide sequences of Bet v 1 were synthetized and used as internal standards for the development of a mass spectrometry-based targeted analysis. The calibration curves of the three peptides to assess the linearity and limit of detection, as well as reverse calibration curves with a constant amount of sample, were constructed. The Bet v 1 content was determined and measured in 18 batches of depigmented (native extracts purified by a mild acid treatment) and depigmented-polymerized extracts.

RESULTS

Bet v 1 isoforms were identified in both type of extracts by mass spectrometry. According to mass spectrometry-targeted analysis depigmented and depigmented-polymerized extracts exhibited mean values of 70.5 and 73.5 µg Bet v 1/mg of lyophilized extract, respectively. A statistically significant correlation between the allergen content of both extracts was identified. Statistically significant differences were observed when the Bet v 1 content in non-polymerized extracts was measured via mass spectrometry (70.5 ± 11.6 µg/mg) or immunoassay (83.7 ± 19.8 µg/mg).

CONCLUSIONS

These results represent the first direct quantification of Bet v 1 in allergoids using mass spectrometry-based targeted analysis. The proposed method demonstrates robustness and reliability and constitutes a promising alternative for detailed characterization of polymerized allergenic extracts.

The History, Present and Future of Allergen Standardization in the United States and Europe

The topic of standardization in relation to allergen products has been discussed by allergists, regulators, and manufacturers for a long time. In contrast to synthetic medicinal products, the natural origin of allergen products makes the necessary comparability difficult to achieve. This holds true for both aspects of standardization: Batch-to-batch consistency (or product-specific standardization) and comparability among products from different manufacturers (or cross-product comparability). In this review, we focus on how the United States and the European Union have tackled the topic of allergen product standardization in the past, covering the early joint standardization efforts in the 1970s and 1980s as well as the different paths taken by the two players thereafter until today. So far, these two paths have been based on rather classical immunological methods, including the corresponding benefits like simple feasability. New technologies such as mass spectrometry present an opportunity to redefine the field of allergen standardization in the future.