Fibrin clot extension on zirconia surface for dental implants: a quantitative in vitro study

Oral Tissue Interactions and Cellular Response to Zirconia Implant-Prosthetic Components: A Critical Review

Background: Dental components manufactured with zirconia (ZrO₂) represent a significant percentage of the implant prosthetic market in dentistry. However, during the last few years, we have observed robust clinical and pre-clinical scientific investigations on zirconia both as a prosthetic and an implantable material. At the same time, we have witnessed consistent technical and manufacturing updates with regards to the applications of zirconia which appear to gradually clarify points which until recently were not well understood. Methods: This critical review evaluated the “state of the art” in relation to applications of this biomaterial in dental components and its interactions with oral tissues. Results: The physico-chemical and structural properties as well as the current surface treatment methodologies for ZrO₂ were explored. A critical investigation of the cellular response to this biomaterial was completed and the clinical implications discussed. Finally, surface treatments of ZrO₂ demonstrate that excellent osseointegration is possible and provide encouraging prospects for rapid bone adhesion. Furthermore, sophisticated surface treatment techniques and technologies are providing impressive oral soft tissue cell responses thus leading to superior biological seal. Conclusions: Dental devices manufactured from ZrO₂ are structurally and chemically stable with biocompatibility levels allowing for safe and long-term function in the oral environment.

Evaluation of silk fibroin electrogel coating for zirconia material surface

Zirconia is commonly used in dental applications. It has been reported that surface-modified zirconia implants showed better performance in vivo than machined zirconia implants. Silk fibroin electrogel is a good candidate for controlled drug delivery; however, the use of silk fibroin electrogel on zirconia implants has not previously been reported. The aim of this study was to investigate a method to coat zirconia implants with silk fibroin electrogel and evaluate the mechanical and biological properties of the coating. The results show that the wettability of the coating was close to that of sand-blasted and acid-etched (SLA)-treated zirconia, and the bond strength was larger than that of the coating prepared from silk fibroin aqueous solution. ATR-FTIR spectra provided evidence that the secondary structure changed during the electrogelation process. Culturing cells on the coating revealed its nontoxicity to osteoblast-like cells. Thus, it can be suggested that a silk fibroin electrogel coating is a promising biocompatible and degradable drugdelivery material for zirconia implants.

Evaluation of Fibrin Clot Attachment on Titanium Laser-Conditioned Surface Using Scanning Electron Microscopy

OBJECTIVES

The study aimed to evaluate the effects of different titanium surface treatments on blood clot extension (bce).

METHODS

A total of 54 titanium disks with machined surface (M), laser-conditioned surface (L), and grit-blasted surface (S) were used in the present study. The surface characteristics such as contact angles and the microroughness were determined on each group (n = 4). To evaluate the bce, 0.1 mL of human blood was dropped onto the surface of each specimen and left for 7 minutes at room temperature. After fixation, dehydration, and gold sputtering treatments, the specimens were observed under scanning electron microscope. The bce values were expressed as percentage of specimen surface covered by blood clot.

RESULTS

The surface roughness (Ra ± standard deviation [SD]) was 0.75 ± 0.02 μm for M, 0.25 ± 0.02 μm for L, and 1.30 ± 0.03 μm for S. The contact angles measured in static conditions (WCA ± SD) were 71 ± 5.4° for M, 107 ± 6.6° for L, and 91 ± 7.2° for S. Regarding the bce (bce ± SD) of M samples (65.5 ± 4.3%) was statistically lower compared with both L (83.4 ± 5.1%) and S samples (72.4 ± 4.7%) (P < 0.05). Meanwhile, the L group showed the higher bce value.

CONCLUSION

The present results suggest that the laser-conditioned surface may increase the wettability and bce.

Effect of different implant abutment surfaces on OBA-09 epithelial cell adhesion

For the long-term success of implants, it is necessary to achieve a direct contact between the implant and the subjacent bone. To avoid bacterial penetration that could adversely affect the initial wound healing as well as the long-term behavior of the implants, an early tissue barrier must form that is able to protect the biological peri-implant structures. Given the need of an effective tissue early barrier around dental implants, the present study evaluated, in vitro, the influence of physical and chemical characteristics of two implant abutment surfaces on gingival epithelial cells (OBA-9) adhesion. To this end, titanium (Ti) and zirconia (ZrO₂ ) disk-shaped specimens were used mimicking the abutment components surfaces, while bovine enamel (BE) and glass cover slips (GCS) disks served as positive and negative controls, respectively. Roughness and surface free energy (SFE) of all materials were evaluated previously to cellular adhesion step. In sequence, the effect of each material on cells morphology and viability was analyzed after 1 and 24 hr. The results showed that roughness and SFE had no effect on the cell viability data or on their interaction (p = .559), independent of a post-contact analysis of 1 or 24 hr. However, cells attachment and spreading increased after 24 hr on Ti and ZrO₂ than BE, corresponding to the highest SFE values. SFE appears to be an important property interfering on the quality of the soft tissue surrounding dental implants. These data can be considered a trigger point for developing new material surfaces.

Dental pulp stem cells grown on dental implant titanium surfaces: An in vitro evaluation of differentiation and microRNAs expression

The surface roughness of dental implants influences the proliferation and differentiation rate of adult mesenchymal stem cells (MSCs). The aim of the present study was to evaluate whether specifically treated titanium implant surfaces influenced human dental pulp stem cells (DPSCs) differentiation in an osteogenic pattern through modulation of microRNAs expression. The degree of differentiation was evaluated after 7, 14, and 21 days, through the expression of microRNAs characterizing the osteogenesis (miR-133 and miR-135), of Runx2 and Smad5 (key factor transcriptions associated with osteoblast differentiation) and Osteocalcin, marker for the bone formation process. DPSCs were cultured on sandblasted and acid-etched titanium disks, with (Test) or without the presence of ions (Control). Early differentiation of DPSCs cultured on titanium could be detected at all the evaluated time points, respect to cells grown alone. Moreover, the Test surfaces seemed to induce a more marked cells differentiation. The obtained results demonstrated that microRNAs played a pivotal role in the differentiation of MSCs and could be used as marker of osteogenic differentiation. Furthermore, the evaluated ionized sandblasted and acid-etched surface seemed to markedly enhance the development of osteoblast cells. A faster osseointegration could be achieved in the presence of specifically treated implant surfaces, promising encouraging clinical outcomes. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 953-965, 2017.

Anatomical Remodeling of Buccal Bone Plate in 35 Premaxillary Post-Extraction Immediately Restored Single TPS Implants: 10-Year Radiographic Investigation

PURPOSE

The anatomical remodeling technique (ART) was proposed to place postextraction implants with the aid of specific osteotomes. This study is a clinical and radiographic evaluation with 10-year follow-up of anterior postextraction single implants placed with the ART and immediately restored.

MATERIALS AND METHODS

Thirty-five patients, with a hopeless tooth in the anterior maxilla, were included in the study and 35 implants were inserted according to the ART. Clinical and radiographic evaluations were performed at baseline (T0), after 6 (T1) and 14 months (T2), 4 years after surgery (T3) and every other year up to the 10-year follow-up (T4, T5, and T6). Implant success, survival, and failure rates were evaluated according to the International Congress of Oral Implantologists Pisa Consensus Conference criteria.

RESULTS

Twenty-nine patients and 29 implants were available for the 10-year data analysis. After 10 years, the accumulated mean marginal bone loss was 2.69 ± 0.42 mm. The cumulative survival rate of the implants was 100%.

CONCLUSIONS

Immediately loaded postextractive implants, placed according to the ART, have been proved to be a predictable method to rehabilitate single tooth in the anterior maxilla.

Enhanced differentiation of human osteoblasts on Ti surfaces pre-treated with human whole blood

Early and effective integration of a metal implant into bone tissue is of crucial importance for its long-term stability. While different material properties including surface roughness and wettability but also initial blood-implant surface interaction are known to influence this osseointegration, implications of the latter process are still poorly understood. In this study, early interaction between blood and the implant surface and how this affects the mechanism of osseointegration were investigated. For this, blood coagulation on a micro-roughened hydrophobic titanium (Ti) surface (SLA-H(phob)) and on a hydrophilic micro-roughened Ti surface with nanostructures (SLActive-H(phil)NS), as well as the effects of whole human blood pre-incubation of these two surfaces on the differentiation potential of primary human bone cells (HBC) was assessed. Interestingly, pre-incubation with blood resulted in a dense fibrin network over the entire surface on SLActive-H(phil)NS but only in single patches of fibrin and small isolated fibre complexes on SLA-H(phob). On SLActive-H(phil)NS, the number of HBCs attaching to the fibrin network was greatly increased and the cells displayed enhanced cell contact to the fibrin network. Notably, HBCs displayed increased expression of the osteogenic marker proteins alkaline phosphatase and collagen-I when cultivated on both surfaces upon blood pre-incubation. Additionally, blood pre-treatment promoted an earlier and enhanced mineralization of HBCs cultivated on SLActive-H(phil)NS compared to SLA-H(phob). The results presented in this study therefore suggest that blood pre-incubation of implant surfaces mimics a more physiological situation, eventually providing a more predictive in vitro model for the evaluation of novel bone implant surfaces.