A retrospective study on ultra‐wide diameter dental implants for immediate molar replacement

Three-dimensional radiographic assessment of immediate implant placement in the posterior mandible: A novel parameter-based classification

OBJECTIVES

To assess the implant position (IP), the interradicular septum width (ISW) and radiographic bone to implant contact (BIC), when simulating an immediate implant placement in first and second mandibular molars.

STUDY DESIGN

75 patients (150 sites) were studied using cone beam computed tomography scans (CBCT) and computer aided design software. Implants were placed in a prosthetically driven position; subsequently, IP and BIC were digitally calculated. Linear ISW was also analyzed at 2, 4 and 6mm apically to the highest septal bony peak. Multiple linear regressions were performed to assess relationships between BIC and the different predictive variables. Additionally, the receiver operating characteristics (ROC) curve was used to create a model for BIC based on the ISW at 2mm.

RESULTS

BIC in implants replacing first molars was the highest at the septal (S) position when compared to those in septal-mesial (S-M) position (p-value 0.001). As for the second molar, the highest percentage of BIC was recorded at the septal (S) position, followed by those in S-M and mesial (M) positions (p<0.001).

CONCLUSION

According to the proposed classification, clinician must consider the ISW and IP when placing immediate implant in the first and second mandibular molar sites. When tackling first molars, S position is predominant, while S-M position is the most common in the second molars. ISW at 2mm should be at least respectively 2mm and 2.5mm at the first and second molar sites to achieve 50% of BIC.

Full arch immediate occlusal loading using site specific implants: A clinical series of 10 patients (13 arches)

PURPOSE

Osseointegration of dental endosseous implants has proven to be effective, predictable, and clinically successful. Unloaded healing protocols were originally used in treating edentulous patients. Full arch immediate occlusal loading protocols have been shown to be as effective as unloaded healing protocols. This paper reports on the results, benefits, and limitations of one specific immediate loading protocol using site specific implants for fresh extraction and healed extraction sites.

MATERIALS AND METHODS

Ten consecutive patients [{13 arches} (age range: 64-81 years; average: 70.1) (4 males/6 females) were treated by the first 2 authors in private practice settings. Hopeless teeth were scheduled for extraction with immediate implant placement and immediate loading with insertion of full arch, screw-retained, acrylic resin interim prostheses within 24 hours. Implants were also placed into healed edentulous ridges. Insertion torque values for each implant were recorded. Interim prostheses were removed after at least 3 months of healing. Implants were reverse torque tested (35 Ncm) and evaluated for macroscopic mobility. Definitive full arch prostheses were made. Patients were followed for 21 to 48 months postimplant surgery. Panoramic radiographs were taken immediately postimplant placement and 1 year postoperative.

RESULTS

Thirteen arches were treated; 11 ultrawide diameter implants were placed into molar sockets, 26 inverted body-shift implants were placed into anterior sockets; 25 standard diameter, tapered implants were placed into edentulous sites; 2 zygomatic implants were placed in one patient. The total number of implants placed was 64 (4 preexisting implants were also used and not included in this study). The minimum implant insertion torque value was 20 Ncm. After 12 to 18 months of function (average 14 months), the implant and prosthetic survival rates were 100%. Eight patients were restored with definitive zirconia or acrylic resin hybrid fixed prostheses. Two patients were restored with bar titanium frameworks and removable overdenture prostheses. No prosthetic complications were reported for the definitive prostheses.

CONCLUSIONS

The results of this clinical series with site specific implants and immediate full arch occlusal loading in treating edentulous patients resulted in 100% clinical implant and prosthetic survival rates. According to this study, this protocol can be used with high levels of anticipated success.

Survival Rate of Ultrawide Diameter Implants Placed into Molar Postextraction Sockets and in Function for Up to 144 Months

PURPOSE

Innovations in macroimplant design, specifically ultrawide implants 7.0 mm or greater in diameter, have allowed immediate molar replacement. This is a retrospective study assessing the survival rates of ultrawide diameter implants (7.0, 8.0, 9.0 mm) immediately placed into molar extraction sockets. Implants were followed up to 144 months postplacement.

MATERIALS AND METHODS

A retrospective study was conducted of all patients treated in a private surgical practice between January 1, 2008 and December 31, 2020, who received ultrawide dental implants (7.0, 8,0, 9.0 mm.) placed immediately into molar extraction sockets. Wide diameter healing abutments were placed on all implants at the time of surgery. Abutments and crown restorations were fabricated after at least 4 months of unloaded healing. Patient age, sex, implant location and implant diameters were examined for survival. Insertion torque values at the time of placement and time in function were also evaluated. Biometric statistics were computed with p-values (<0.05. Descriptive and bivariate statistics were computed; p-values were set at 0.05.

RESULTS

Five hundred forty-four patients (225 males; 319 females) average age 62.5 years (range 27 to 95) had 563 implants placed. Five hundred thirty-five of five hundred sixty-three (535/563) implants survived; 28 failed [clinical survival rate (CSR) 95.03%]. Number and time in function were: 0 to 12 years 100%; 0 to 9 years 85%; 0 to 6 years 69%; 0 to 3 years 35% or 10 to 12 years 16%; 7 to 9 years 16%; 4 to 6 years 34%; 0 to 3 years 35%. No significant differences were found between sex and implant failures (p = 0.22). Maxillary (266/285; 93.3%) and mandibular (269/278; 96.8%) implant CSRs were not significantly different. Three implant diameters were used: 7.0 mm (206/563) [36.6%]; 8.0 mm (267/563) [47.4%]; 9.0 mm (90/563) [15.9%]. Clinical survival rates were: 7.0 mm (201/206) [97.6%]; 8.0 mm (252/267) [94.4%]; 9.0 mm (82/90) [91.1%]. Mean age for patients with failed implants did not show any significant differences (p = 0.1398). Fifteen of the 28 failed implants failed within 120 days of surgical placement (prior to definitive restoration; [53.6%]; 4 implants failed between 4 and 12 months [14.3%]; 9 implants failed at least 1-year postloading [32.1%].

CONCLUSIONS

The results of this long-term retrospective study regarding ultrawide diameter implants suggested that these implants were viable treatment options for immediate molar replacement following tooth extraction in either jaw with an unloaded healing protocol. High clinical survival rates were reported over a 144-month (12-year) timeframe.

Morphological Characteristics of Maxillary Molars Interradicular Septum and Clinical Implications - What do We Know So Far?

The interradicular septum describes area in the root furcation that separate alveoli of multi-rooted teeth. The shape and dimension depend of the topography of the extraction socket, the geometry of residual root and anatomy of molars alveoli. The clinical implications of this anatomic structure may be used in oral surgery resection procedures, periodontology and implantology. There is an opinion from the surgical and prosthodontic side that center of interradicular septum may be adequate place for immediate implantation. The aim of this study was to investigate morphological characteristics and clinical implications of upper molars interradicular septum. The studies showed that interradicular septum is important for success of resection surgery procedures: hemi-section, bisection and root amputation. It’s reported that furcation involvement in periodontal disease is clinical sign for severe bone loss. By reviewing the available literature for immediate implantation, it’s reported the clinical implications for diagnostical plan (pre-intervention), presurgical (pre-instrumentation) and intraoperative evaluation of interradicular septum for immediate implantation. The cone beam computed tomography analyze study presented mean values of septum height and wide for hypothetical plan of immediate implant placement. The presurgical studies evaluate how to assure preservation of septum and safe implant position in center of septum. The research showed varies therapy modalities that can be used, and how to choose right therapy according the socket type and initial septum width classification. According to observation of studies results, other researches should be considered for CBCT anatomical structure analyze and measures of interradicular septum for immediate implantation planning.

Molar Septum Expansion with Osseodensification for Immediate Implant Placement, Retrospective Multicenter Study with Up-to-5-Year Follow-Up, Introducing a New Molar Socket Classification

The ideal positioning of immediate implants in molar extraction sockets often requires the osteotomy to be in the interradicular septum, which can be challenging in some cases, with traditional site preparation techniques. Patients who had undergone molar tooth extraction and immediate implant placement at five different centers, and followed up between August 2015 and September 2020, were evaluated. Inclusion criteria were use of the osseodensification technique for implant site preparation. The primary outcome was septum width measurement pre-instrumentation and osteotomy diameter post expansion. Clinical outcomes, such as implant insertion torque (ISQ) and implant survival rate, were also collected. A total of 131 patients, who received 145 immediate implants, were included. The mean overall septum width at baseline was 3.3 mm and the mean osteotomy diameter post instrumentation was 4.65 mm. A total of ten implants failed: seven within the healing period and three after loading; resulting in a cumulative implant survival rate of 93.1%. This retrospective study showed that osseodensification is a predictable method for immediate implant placement with interradicular septum expansion in molar extraction sockets. Furthermore, it allowed the introduction of a new molar socket classification. In the future, well-designed controlled clinical studies are needed to confirm these results and further explore the potential advantages of this technique.

Three-dimensional alveolar bone assessment of mandibular molars for immediate implant placement: a virtual implant placement study

Background

To elucidate the anatomical features of the mandibular molar region to allow safe immediate implant placement.

Methods

Cone-beam computed tomography images of 150 patients (600 teeth) were reviewed retrospectively. The virtual implants were placed in the mandibular first and second molar region. The anatomic structures of the mandible and inter-radicular septum were both categorized into three types. The relationship between implant and inferior alveolar nerve (IAN), and the horizontal distance from the implant surface to the bone wall were analyzed. Variables were compared using a student’s t-test, or Mann–Whitney U test.

Results

Type U (39.0%) and type S (56.0%) were the most common in the first molar, while type U (67.7%) and type M (54.7%) had the highest prevalence rate in the second molar. The mean distance from the level where the virtual implant was completely surrounded by bone to IAN was 7.06 mm. The mean horizontal widths from the implant to the mesial and distal socket wall were 1.59 mm and 1.89 mm. The widths of the inter-radicular septum and the distances from implant to the buccal and lingual plate on different sections were significantly associated with tooth position (P < .05).

Conclusions

In the first molar region, the implant is suggested to be placed in the center of the inter-radicular septum, while in the second molar region, the mesial root socket could be considered. Immediate implant placement in the mandibular second molar sockets shows a high risk of IAN injury, lingual perforation, and inadequate primary stability.

Computed Tomography for the Assessment of the Potential Risk After Implant Placement in Fresh Extraction Sites in the Posterior Mandible

Immediate implant placement (IIP) is considered a reliable procedure, with survival rates of 94.9%-98.4%. Nevertheless, in the posterior mandible, it poses a high risk of damage to anatomic structures. The aim of this study was to determine the risk of anatomic structures injury associated with IIP in the posterior mandible based on apical primary stability, respecting a safe distance from the inferior alveolar nerve and lingual plate, and to evaluate the influence of different factors on those risks. Pre-extraction cone beam computed tomography scans of 100 patients were retrospectively analyzed. Measurements were taken from tooth apices to lingual plate and to mandibular canal. Values of <4 mm of the former and <6 mm of the latter were categorized as considerable risk. Values of <2 mm at both measurements were considered high risk. Two-sided P < .05 was considered statistically significant. Mean root-to-alveolar canal distance was 7.6 ± 2.7 mm in the first molar, 6.5 ± 3mm in the second premolar, and 5.4 ± 3 mm in the second molar (P < .005). The mean distance to the outer lingual cortex was 3.9 ± 2.1 mm in the first molar and 3.2 ± 0.1 mm in the second molar. Thus, second molars were at higher risk of inferior alveolar nerve injury and lingual plate perforation during IIP. Background factors associated with higher IIP risk were female sex and age < 40 years. In the mandible, the anatomic risk posed by IIP is greatest for second molars and lowest for first molars. Several background factors affect the distances between root apices and the mandibular canal.

Immediate implant placement with or without connective tissue graft: A systematic review and meta-analysis

OBJECTIVES

To assess the effect of connective tissue graft (CTG) in terms of vertical mid-facial soft tissue change when applied at the buccal aspect following single immediate implant placement (IIP).

MATERIALS AND METHODS

Two independent reviewers conducted an electronic literature search in PubMed, Web of Science, EMBASE and Cochrane databases as well as a manual search to identify eligible clinical studies up to January 2020. Randomized controlled trials (RCTs) and non-randomized controlled studies (NRSs) comparing IIP with CTG and without CTG over a mean follow-up of at least 12 months were included for a qualitative analysis. Meta-analyses were performed on data provided by RCTs.

RESULTS

Out of 1814 records, 5 RCTs and 3 NRSs reported on 409 (IIP + CTG: 246, IIP: 163) immediately installed implants with a mean follow-up ranging from 12 to 108 months. Only 1 RCT showed low risk of bias. Meta-analysis revealed a significant difference in terms of vertical mid-facial soft tissue change between IIP + CTG and IIP pointing to 0.41 mm (95% CI [0.21; 0.61], p < .001) in favour of soft tissue grafting. This outcome was clinically relevant since the risk for ≥1 mm asymmetry in mid-facial vertical soft tissue level was 12 times (RR 12.10, 95% CI [2.57; 56.91], p = .002) lower following IIP + CTG. Soft tissue grafting also resulted in a trend towards less bleeding on probing (MD 17%, 95% CI [-35%; 1%], p = .06). Meta-analyses did not reveal significant differences in terms of pink aesthetic score, marginal bone level change and probing depth. Results were inconclusive for horizontal mid-facial soft tissue change and papilla height change. Based on GRADE guidelines, a moderate recommendation for the use of a CTG following IIP can be made.

CONCLUSION

CTG contributes to mid-facial soft tissue stability following IIP. Therefore, CTG should be considered when elevated risk for mid-facial recession is expected in the aesthetic zone (thin gingival biotype, <0.5 mm buccal bone thickness).