Fracture resistance and failure mode of endodontically treated teeth restored using ceramic onlays with or without fiber posts-an ex vivo study

A novel insertion design of fiber materials for the adhesive reattachment in vertically fractured teeth

Objective

This ex vivo study aimed to evaluate the strengthening effect of different ferrule and reattachment designs with fiber and adhesive materials on vertically fractured teeth.

Methods

Ninety extracted single-root premolars were instrumented and divided into nine groups (two control groups and seven experimental groups; n = 10). The negative control (NC) group comprised of intact teeth, while the positive control (PC) group comprised of root canal-treated teeth. The roots of the teeth in the experimental groups were vertically fractured into two equal fragments. The fragments were reattached with one of the followings: 4-methacryloxyethyl trimellitate anhydride/methacrylate-tri-n-butyl borane (4-META/MMA-TBB) resin, 4-META/MMA-TBB + quartz fiber post, 4-META/MMA-TBB + glass fiber bundles, 4-META/MMA-TBB + quartz fiber post + 1 mm ferrule, 4-META/MMA-TBB + glass fiber bundles + 1 mm ferrule, 4-META/MMA-TBB + quartz fiber post + 2 mm ferrule, and 4-META/MMA-TBB + glass fiber bundles + 2 mm ferrule. The core build-ups were made with composite resin. The specimens were subjected to compressive loading until failure occurred. Mean load necessary to fracture each sample and the fracture types of these samples were recorded.

Results

The highest mean fracture load was recorded in the NC group (1,036.7 N), which was not significantly higher than the PC group (989.66 N) (p > 0.05). The roots reattached with quartz fiber post demonstrated significantly less fracture strength (871.9 N) as compared to the other test and control groups (p < 0.05). There was no significant difference between the PC group and reattached fragments with different ferrule designs in terms of fracture resistance (p > 0.05).

Conclusions

The customized fiber bundles may be more suitable for reattachment of vertically fractured teeth than the rigid fiber posts. For reattachment procedures, the ferrule design may be preferred to increase the fracture strength of vertically fractured teeth.

External Marginal Gap Variation and Residual Fracture Resistance of Composite and Lithium-Silicate CAD/CAM Overlays after Cyclic Fatigue over Endodontically-Treated Molars

The purpose of this in vitro study was to evaluate the external marginal gap variation with a 3D quantitative method and the residual fracture resistance after cyclic fatigue in endodontically treated molars restored with overlays of different materials, with and without fiber posts-supported buildups. Forty-eight human maxillary molars were selected, endodontically treated, prepared with standardized MOD cavities and randomly allocated into 6 study groups considering the "core strategy" (build-up with composite resin; build-up with composite resin supported by a fiber post); and the "restorative material" of the indirect adhesive overlay (GrandioBlocks, Voco; Cerasmart, GC; CeltraDuo, Dentsply). All procedures were executed according with manufacturers guidelines. Micro-CT analysis prior and after cyclic fatigue were executed, followed by scanning electron microscope analysis and fracture resistance test. The Two-Way ANOVA analysis showed that interfacial gap progression was significantly influenced by the "core strategy" (p < 0.01) but not of "restorative material" (p = 0.59). Concerning fracture resistance, "restorative material" was statistically significant (p < 0.01), while "core strategy" (p = 0.63) and the interaction (p = 0.84) were not. In conclusion, the fiber post presence within the build-up promoted a lower interfacial gap opening after fatigue, evaluated through micro-CT scans. In terms of fracture resistance, teeth restored with Cerasmart and Celtra Duo were statistically similar, but superior to GrandioBlocks.

Effect of post-space irrigation with acid solutions on bond strength and dentin penetrability using a self-adhesive cementation system

Background

The aim of this study was to evaluate the effects of surface treatments with 1% peracetic acid (PA), solution containing 17% EDTA (SmearClear, Kerr Endodontics), solution containing a combination of 17% EDTA with 2% chlorhexidine (QMix, Dentsply Sirona) on the post-space root dentin compared to 2.5% sodium hypochlorite (NaOCl) on bond strength and resin tags length in dentin.

Material and Methods

Forty human-canine roots were endodontically treated and the post space was prepared. The specimens were randomised into four groups (n = 10): control – irrigation with 2.5% NaOCl solution, PA – irrigation with 1% PA, SmearClear – irrigation with SmearClear solution, and QMix – irrigation with QMix solution. The fibre posts were cemented using a self-adhesive resin system (Relyx U200, 3M ESPE). After six months, the specimens were cross-sectioned and subjected to push-out and confocal laser microscopy tests. One-way ANOVA and Tukey’s tests were used to analyse the data (α= 0.05).

Results

PA and QMix presented the highest bond strength values compared to the other groups (p< 0.05). There was no significant difference between the resin tags length in dentin by the groups (p = 0.75).

Conclusions

Irrigation of the post space with 1% PA and QMix showed a positive clinical impact on the adhesion between the fiber post and root dentin. However, these materials had no influence on resin tags length in dentin by self-adhesive resin cement.

Key words:Fiber post, adhesive cementation, self-adhesive resin cement, root dentin, irrigating solutions.

Effect of Inlays, Onlays and Endocrown Cavity Design Preparation on Fracture Resistance and Fracture Mode of Endodontically Treated Teeth: An In Vitro Study

PURPOSE

To evaluate the fracture resistance and failure modes of endodontically treated mandibular molars restored with different designs of inlays, onlays and endocrowns.

MATERIALS AND METHODS

Extracted mandibular third molars (n = 180) were used. An access cavity was prepared on the occlusal surface of each tooth and the roots were obturated with gutta percha. All specimens were randomly divided into 6 groups (n = 30/group) according to the cavity design and the restoration material used. C: control group without access cavity preparation. IE: MOD inlay preparation with EverX Posterior (GC Europe) in the pulp chamber. IG: MOD inlay preparation with G-aenial Universal Flo (GC America) in the pulp chamber. OE: onlay preparation with EverX Posterior (GC Europe) in the pulp chamber. OG: onlay preparation with G-aenial Universal Flo (GC America) in the pulp chamber. EC: endocrown with an empty pulp chamber. All restorations were fabricated with CAD/CAM system using CERASMART^® (GC Dental products Europe, Belgium) CAD/CAM blocks. Specimens were thermal-cycled and were subjected to a compressive load applied at 30° angle relative to the long axis of the tooth with a universal testing machine. Results were statistically analyzed by ANOVA followed by Tukey post hoc tests. Chi-square test and Fisher Exact tests were used for the comparisons among groups.

RESULTS

The mean fracture strength was significantly different between the groups (p < 0.001); it was significantly highest for intact teeth, followed by endocrowns (p = 0.021). The strength was significantly lower for inlays (with G-aenial Universal Flo and EverX Posterior), intermediate for onlays with EverX Posterior followed by onlays with G-aenial Universal Flo.

CONCLUSIONS

Endocrowns exhibited higher fracture resistance than other tested composite resin groups. Endocrowns and onlays showed a more favorable failure mode than inlay restorations.

Fracture resistance and stress distribution of repairing endodontically treated maxillary first premolars with severe non-carious cervical lesions

This study was to compare the influence of glass fiber post placement and crown restoration on endodontically treated maxillary first premolars with severe NCCLs using three-dimensional finite element analysis and fracture resistance testing. G1, intact teeth. G2, teeth with artificial defect. G3, composite resin (CR). G4, CR and fiber post in buccal canal (FPB). G5, CR and fiber post in palatal canal (FPP). G6, CR and fiber posts in buccal and palatal canals (FPBP). G7, CR and crown (C). G8, CR, FPB, C. G9, CR, FPP, C. G10, CR, FPBP, C. Teeth in G2, G3, and G5 showed a similar stress concentration at the tip of the defect. The fracture resistance of G2 did not differ significantly from G3 and G5 (p>0.05) but differed significantly from that in other groups (p<0.05). The fractures in G4 were more favorable, and the difference of those in G1 from those in G7, G8, G9, and G10 was statistically significant (p<0.05). Restoration of root-filled maxillary premolars with severe NCCLs using fiber post in the buccal canal may be more efficacious than other restoration methods.