Tooth autotransplantation as a pillar for 3D regeneration of the alveolar process after severe traumatic injury: A case report

Tooth autotransplantation outcomes using platelet-rich fibrin: A promising approach; case study

BACKGROUND

Autogenous tooth transplantation refers to a surgical procedure involving the relocation of a tooth within the same individual. Incorporating platelet-rich fibrin (PRF) in this procedure holds the potential to improve healing, accelerate recovery, and optimize treatment outcomes.

METHODS

In this article, the authors illustrate a PRF-based approach for autogenous tooth transplantation through two case scenarios. These cases outline the surgical steps of tooth transplantation and demonstrate the potential role of PRF in enhancing soft tissue healing. Furthermore, the article provides insights from a long-term follow-up spanning over 7 years.

RESULTS

Tooth transplantation in young adults is promising but depends on factors such as root development stage and donor tooth size matching. Including PRF may improve healing, at least in the short term, due to its rich concentration of growth factors and cytokines, promoting effective tissue regeneration.

CONCLUSIONS

Autogenous tooth transplantation has shown to be a viable treatment option for replacing the missing dentition. Adding PRF to the autogenous tooth transplantation procedure may speed up and enhance the treatment outcome. While the favorable results of these cases might be partially attributed to the use of PRF, the contribution of PRF to the healing process of tooth transplant remains conjectural and requires validation through additional research.

KEY POINTS/HIGHLIGHTS

Tooth autotransplantation can be performed in younger patients without requiring root canal treatment, while also potentially benefiting from the incorporation of platelet-rich fibrin (PRF).

Critical analysis of the reporting quality of case reports focusing on dental traumatology using the Preferred Reporting Items for Case reports in Endodontics 2020 checklist: A baseline evaluation prior to checklist publication

BACKGROUND/AIMS

The Preferred Reporting Items for Case Reports in Endodontics (PRICE) 2020 guidelines were published to help authors produce high-quality case reports. The aim of this study was to use the PRICE 2020 guidelines to appraise a sample of 50 case reports related to dental traumatology that were published before the guidelines were available in order to assess various parameters influencing the reporting quality.

METHODS

Fifty case reports published between 2015 and 2019 and related to dental traumatology were randomly selected from the PubMed database. Reports were assessed by two independent evaluators using the PRICE checklist. Each item received a score of "1" if the manuscript met all pertinent criteria, "0" if it was not reported, and "0.5" if it was reported insufficiently. "Not Applicable" (NA) was assigned to items that were irrelevant to a specific report. The estimated total PRICE score for each case report was computed by adding all the scores, with a maximum score of 47 minus any "NA" scores. Descriptive and Inferential statistics (Student's t-test and ANOVA) were used for analysis.

RESULTS

The percentage of case reports that fully met each applicable criteria ranged from 0% to 100%. The percentage of case reports partially satisfying each applicable criterion varied from 0% to 88%. There was a significant difference in scores for case reports published in journals with an impact factor compared with those without (p = .042). No significant difference was observed between the mean scores that compared the period of publication. There was no significant difference between journals that followed the CARE guidelines and those that did not.

CONCLUSION

Several items within the PRICE 2020 guidelines were either not reported or only partially reported in case reports related to dental traumatology prior to the checklist publication. It is recommended that authors follow the PRICE 2020 guidelines to improve the overall quality of their case reports.

Status of the alveolar bone after autotransplantation of developing premolars to the anterior maxilla assessed by CBCT measurements

Background/Aims

Autotransplantation of developing premolars is an established treatment to replace missing teeth in the anterior maxilla in growing patients with a reported success rate of over 90%. The normal shape of the alveolus is observed after transplantation, but data on the presence and amount of alveolar bone after healing has not been previously reported. The aim of this study was to look for potential differences in alveolar bone dimensions between sites where autotransplanted premolars replaced missing incisors and control sites of contralateral incisors.

Material/Methods

There were 11 patients aged between 10 and 12 years five months (mean age: 10 years and 7 months) who underwent autotransplantation of a premolar to replace a central incisor. Cone Beam Computed Tomography (CBCT) performed at least 1 year after transplantation served to evaluate bone at sites of autotransplanted premolars and controls (contralateral maxillary central incisor). The thickness of the labial bone, plus the height and width of the alveolar process were measured on scans and compared at transplant and control sites.

Results

Mean thicknesses of the labial bone at the transplant and control sites were 0.78 mm and 0.82 mm respectively. Mean alveolar bone height was 15.15 mm at the transplant sites and 15.12 mm at the control sites. The mean marginal thickness of the alveolus was 7.75 mm at the transplant sites and 7.98 mm at the control sites. Mean thicknesses of the alveolus for half of its vertical dimension at the transplant and control sites were 7.54 mm and 8.03 mm, respectively.

Conclusion

The mean values of bone thickness, width and height of the alveolar process at sites of transplanted premolars were comparable to the mean values for the control incisors. Successful autotransplantation of developing premolars to replace missing central incisors allowed preservation of alveolar bone in the anterior maxilla.

Tooth autotransplantation using an interdisciplinary approach to rehabilitation in a young patient: Case report with 7-year follow-up

This case report demonstrates the possibility of functional and aesthetic rehabilitation using an interdisciplinary approach in a child following avulsion of a tooth. Autotransplantation after the development of calcific metamorphosis of the pulp and acute apical periodontitis provided satisfactory repair after root canal treatment. A 7-year-old white boy avulsed the right maxillary central incisor (tooth 11). The extra-alveolar time exceeded 60 minutes, and this triggered external replacement resorption of the avulsed tooth. At 11 years of age, the child underwent tooth autotransplantation. After 4 years of follow-up, intraoral clinical and radiographic examination led to the diagnosis of calcific metamorphosis of the pulp and acute apical periodontitis. The patient had minimally invasive root canal treatment, orthodontic treatment and esthetic rehabilitation with a porcelain crown. Control periapical radiography and tomography of the autotransplanted tooth after 7 years revealed bone repair in the periapical region. This case report indicates that tooth autotransplantation can be used to replace anterior teeth after avulsion followed by replacement resorption. Interdisciplinary management helped to maintain the esthetics and function of the rehabilitated area.

Technology at the service of surgery in a new technique of autotransplantation by guided surgery: a case report

Background

The aim of this case report was to use a surgical technique for autotransplantation of tooth using virtually planned 3D printed surgical templates for guided osteotomy preparation of the recipient of donor tooth.

Case presentation

An 18-year-old male patient received autotransplantation of the right mandibular third molar to replace an included right second molar. This procedure was based on guided implant surgery methods by superimposition of DICOM files and 3D data sets of the jaws. In order to design a 3D-printed template with the aid of a fully digital workflow; the third molar was conserved in PRGF during the surgical procedure and the tooth socket was prepared with a template and the help of a 3D-printed donor tooth copy in order to prevent iatrogenic damage to the donor tooth. This template and replica were manufactured using 3D-printing techniques. The transplanted tooth was placed in infra-occlusion and fixed with a suture splint and root canal therapy was performed 15 days later. The intervention was be accomplished by performing preplanned virtual transplantations with guided osteotomies to ensure accurate donor tooth placement in the new recipient site. The 24 months follow-up showed physiological clinical and radiologic results compatible with healing periradicular tissues.

Conclusions

This approach enables the planning and production of a 3D printed surgical template using the latest diagnostic methods and techniques of guided implant surgery. These accurate virtually predesigned surgical templates and printed analogues of the donor tooth could facilitate autotransplantation, ensuring an atraumatic surgical protocol.

Successful pulp revascularization of an autotransplantated mature premolar with fragile fracture apicoectomy and plasma rich in growth factors: a 3-year follow-up

AIM

This case report demonstrates a positive outcome of the adjuvant use of fragile fracture (FF), which is a technique used to harvest dental pulp stem cells (DPSCs), and platelet-rich plasma (PRP) in a mandibular premolar (tooth 44) with a completely formed root that was transplanted into a surgically created socket and which maintained pulp vitality and function.

SUMMARY

After virtual surgical planning, a 3D tooth replica of tooth 44 was fabricated. A surgical socket was created in the position of tooth 14; then, tooth 44 was extracted and the root dentine was abraded using a turbine diamond bur 3 mm from the apex until a circular groove was prepared around the outer circumference of the root; and then, an FF was performed without damaging the pulp tissue. PRP was placed in the socket, after which the donor tooth was inserted in the recipient area. At 2 weeks post-treatment, orthodontic traction was applied. At 3-year follow-up, the tooth had adequate alignment and was asymptomatic. Response to pulp testing was positive, and the presence of pulp canal obliteration was observed as a sign of pulpal healing.

KEY LEARNING POINTS

Autotransplantation is a good alternative for replacing missing teeth, with repair of tissues and pulp revascularization. Revascularization of an autotransplanted mature tooth using the fragile fracture technique and PRP scaffold is a feasible option and might have positive effects on the long-term outcome of the procedure. Including completely formed teeth as donors in autotransplantation, maintaining vitality and their functions is an option that warrants further study.