Anin vitrocomparison of adhesive systems to seal pulp chamber walls

Effect of different adhesive strategies and storage time on bond strength of bifunctional monomers to simulated endodontically-treated dentin

Adhesive strategies were evaluated on the bond strength of bi-functional monomers bonded to endodontically-treated-dentin (ETD). Superficial dentin was removed on human molars. Teeth were immersed in 5 mL 2.5% NaOCl, followed by immersion in 5 mL 17% EDTA. Dentin surface impregnated with epoxy resin-based sealer was then divided four groups (n=10): Scotchbond Multi-Purpose (SBMP); Single Bond Universal (SBU); Optibond All-in-One (OPB); and Tetric-N-Bond Universal (TBU). After 24-h or 1-year-of-storage specimens were submitted to microtensile bond strength (µTBS) and failure classification. A confocal laser scanning microscope (CLSM) evaluated the hybrid layer formation. Two-way ANOVA and Tukey-HSD test were performed (α=5%). The µTBS did not present statistical differences among adhesive strategies after 24-h. Significant differences were found after 1-year-of-storage. CLSM analysis showed water infiltration and consequently degradation of the hybrid layer after 1-year-of-storage. The use of SBU universal adhesive on the self-etching mode on ETD produced more stable bond over the 1-year-of-storage.

Effect of Calcium Hydroxide, Chlorhexidine Digluconate and Camphorated Monochlorophenol on the Sealing Ability of Biodentine Apical Plug

INTRODUCTION

Teeth with immature apex are managed by establishing an apical plug using various materials and techniques. However, the use of previously placed intracanal medicament may affect the sealing ability of permanent filling material used as an apical plug.

AIM

To evaluate the effect of removal of previously placed Calcium Hydroxide, Chlorhexidine Digluconate and Camphorated Monochlorophenol as an intracanal medicament on the sealing ability of the Biodentine as an apical plug.

MATERIALS AND METHODS

A total of 72 recently extracted human permanent teeth with single root were selected and stored in saline at room temperature. The crown portion of each tooth was removed at the level of cemento enamel junction; 14mm root length was taken as standard length. All the roots were submerged in 20% sulphuric acid up to 3 mm from the apex, for four days for root resorption. One sample was cut longitudinally to look for root resorption under stereo microscope. The canal preparation was done; the roots were kept in moist gauze after instrumentation. A total of 71 roots were randomly divided into three groups. GROUP 1:Calcium hydroxide paste, GROUP 2: Chlorhexidine digluconate, GROUP 3: Camphorated Monochlorophenol (CMCP). The medicaments were removed with stainless steel hand files and 0.5% sodium hypochlorite irrigation. After removal of medicament Biodentine was placed in apical third of resorbed roots and the remaining portion of the canals was filled with gutta-percha. All the 71 roots were analysed with fluid filtration method for evaluating microleakage.

RESULTS

Comparing all the three groups statistically there was no significant difference. The mean values were found more for group 1 followed by group 2 & 3.

CONCLUSION

All the groups showed microleakage. Calcium hydroxide showed the maximum microleakage followed by Chlorhexidine digluconate and least with CMCP.

Microleakage evaluation of adhesive systems following pulp chamber irrigation with sodium hypochlorite

Background and aims. This in vitro study evaluated the effect of delaying composite resin restorative procedures bonded with total-etch and self-etch adhesive systems on microleakage following root canal irrigation with sodium hy-pochlorite (NaOCl) solution. Materials and methods. The roofs of pulp chambers and roots (1–2 mm below furcation) of 40 human first molar teeth were cut and pulp tissues completely removed. The teeth were randomly divided into two main groups (n = 20). Group E (experimental) was irrigated with 5% NaOCl and group C (control) was left untreated. For the experimental group, after obturation of root canals with gutta-percha and sealing the cavity with Cavit, the specimens were stored in artificialsaliva for two weeks. Then each group was divided into two subgroups according to the total-etch or self-etch adhesive application protocol: Scotchbond Multi-Purpose and Clearfil SE Bond. The specimens were restored with composite resin using each bonding agent: Z250 and Clearfil Photo Core, respectively. Fluid filtration method was used for evaluation of microleakage. Data was analyzed using two-way ANOVA ( α= 0.05). Results. Two types of dentin adhesive systems showed no statistically significant differences in microleakage (P = 0.77). NaOCl-treated groups demonstrated significantly higher microleakage values compared to the non-NaOCl-treated groups (P= 0.001). The interaction between the two factors was not significant (P = 0.78). Conclusion. Differences in inlay temperature had no effect on microleakage. CAD/CAM inlays had lower cement thick-ness than laboratory-made inlays, but this was not related to their microleakage.

Zinc oxide nano-particles as sealer in endodontics and its sealing ability

Aims:

The aim of this study was to evaluate the sealing ability of new experimental nano-ZOE-based sealer.

Settings and Design:

Three types of nano-ZOE-based sealer (calcined at different temperatures of 500, 600 and 700°C) with two other commercially available sealers (AH26 and micro-sized zinc oxide eugenol sealer) were used.

Materials and Methods:

Zinc oxide nano-particles were synthesized by a modified sol-gel method. The structure and morphology of the prepared powders were characterized using x-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. The instrumented canals of 60 single-rooted teeth were divided into five groups (n = 10), with the remaining ten used as controls. The canals were filled with gutta-percha using one of the materials mentioned above as sealer. After 3, 45 and 90 days, the samples were connected to a fluid filtration system.

Statistical Analysis Used:

The data were analyzed using Student's t-test.

Results:

The XRD patterns and TEM images revealed that all the synthesized powders had hexagonal wurtzite structures with an average particle size of about 30-60 nm at different calcination temperatures. Microleakage in AH26 groups was significantly more than that in three groups of ZnO nano-particles at all the three evaluation intervals. Apical microleakage of ZnO micro-powders was significantly more than that of all the materials, but the sealing ability of ZnO nano-powder sealers did not differ significantly.

Conclusion:

The results of this study showed that the synthesized ZnO nano-powder sealers are suitable for use as a nano-sealer in root canal therapy to prevent leakage; however, further studies should be carried out to verify their safety.

Evaluation of microleakage following application of a dentin bonding agent as root canal sealer in the presence or absence of smear layer

The aim of this study was to compare the apical leakage of roots obturated with gutta-percha using either an epoxy resin sealer (AH26) or a dual cure dentin binding agent (Excite DSC) as sealer in the presence or absence of smear layer with fluid filtration method. The canals of eighty-six, single-rooted premolars were instrumented until a #40 K-file fit at working length and then randomly divided into four groups (n = 20) with the remaining six used as controls. Groups 1 and 2 were filled with gutta-percha using AH26 as sealer; groups 3 and 4 were filled with gutta-percha and Excite DSC as sealer. Groups 1 and 3 were smear layer-positive, while group 2 and 4 were designated as smear layer-negative. After 3 days and 3 months, the samples were connected to a fluid filtration system. Analysis of data with the paired t-test showed that microleakage in AH26 groups (with and without smear layer) decreased significantly at 3 months compared to 3 days; however, in the DBA groups, the amount of microleakage at 3 days and 3 months was not significantly different. According to the results of this study, DBA (Excite DSC) had better apical sealing ability and could be applied clinically.

Sealing Ability of New Adhesive Root Canal Filling Materials Measured by New Dye Penetration Method

The sealing ability of new adhesive root canal filling materials was evaluated using a new dye penetration method. Twenty-eight single-rooted mandibular premolars were randomly divided into four groups of seven teeth each and filled by lateral condensation using one of these combinations: Resilon point with Epiphany sealer (RE); gutta-percha point with Sealapex sealer (GS); gutta-percha point with dentin activator and Superbond sealer (GDS); or gutta-percha point with Accel primer, dentin activator, and Superbond sealer (GADS). Amount of 0.06% methylene blue dye solution (MB) that leaked from the coronal portion to the apical area was measured with a spectrophotometer at one, four, eight, 15, and 30 days in an accumulative manner. The total amount of leaked MB on day 30 was significantly higher for GDS than the other combinations (p < 0.05).

Adhesive Dentistry and Endodontics: Materials, Clinical Strategies and Procedures for Restoration of Access Cavities: A Review

The complexity of restorative dentistry has increased greatly in recent years, with the myriad of products used in "adhesive dentistry." So too has the "simple" matter of restoring access cavities after completion of endodontic treatment. This review discusses current methods of "bonding" to tooth structure, ceramic materials, and metals, with emphasis on those aspects that are important to endodontics. Specific materials, procedures and major decision making elements are discussed, as well as how to avoid problems in compatibility between endodontic and restorative materials.