Polymer-assisted regeneration therapy with Atrisorb barriers in human periodontal intrabony defects

Engineering periodontal tissue interfaces using multiphasic scaffolds and membranes for guided bone and tissue regeneration

Periodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.

Guided Tissue and Bone Regeneration Membranes: A Review of Biomaterials and Techniques for Periodontal Treatments

This comprehensive review provides an in-depth analysis of the use of biomaterials in the processes of guided tissue and bone regeneration, and their indispensable role in dental therapeutic interventions. These interventions serve the critical function of restoring both structural integrity and functionality to the dentition that has been lost or damaged. The basis for this review is laid through the exploration of various relevant scientific databases such as Scopus, PubMed, Web of science and MEDLINE. From a meticulous selection, relevant literature was chosen. This review commences by examining the different types of membranes used in guided bone regeneration procedures and the spectrum of biomaterials employed in these operations. It then explores the manufacturing technologies for the scaffold, delving into their significant impact on tissue and bone regenerations. At the core of this review is the method of guided bone regeneration, which is a crucial technique for counteracting bone loss induced by tooth extraction or periodontal disease. The discussion advances by underscoring the latest innovations and strategies in the field of tissue regeneration. One key observation is the critical role that membranes play in guided reconstruction; they serve as a barrier, preventing the entry of non-ossifying cells, thereby promoting the successful growth and regeneration of bone and tissue. By reviewing the existing literature on biomaterials, membranes, and scaffold manufacturing technologies, this paper illustrates the vast potential for innovation and growth within the field of dental therapeutic interventions, particularly in guided tissue and bone regeneration.

The efficiency of the regeneration of periodontal intrabony defects in East Asians: A systematic review and pooled analysis

This article aimed to assess the efficacy of periodontal regenerative therapy (PRT) for treating periodontal intrabony defects in East Asians. The systematic review was performed according to the PRISMA guidelines. Literature searches on the PubMed and national medical journal databases, and representative clinical journals of the East Asians were performed on July 31, 2018. Randomized controlled trials, prospective case-control studies, retrospective analyses, and case series receiving regenerative procedures, including barrier membrane (BM) and enamel matrix derivative (EMD) applications with or without bone replacement graft (BRG), with follow-up periods of 6 and 12 months were evaluated. The outcome variables were probing depth (PD) reduction and clinical attachment level (CAL) gain. Twenty studies were included, of which eight were assessed for bias risk. Compared to open flap debridement, PD reduction and CAL gain were superior in all PRTs at both follow-up time points. BM or EMD alone showed equivalent outcomes at 6 months, and CAL gain appeared greater with BM alone at 12 months. BM with BRG showed inferior CAL gain relative to BM alone, but EMD with BRG showed superior CAL gain relative to EMD alone at 12 months. In conclusion, PRT showed improved regenerative outcomes compared with OFD in East Asians, while BM application appeared less efficient than in non-East Asians. BRG supplementation provided additional clinical benefits in EMD application.

Periodontal Therapy Using Bioactive Glasses: A Review

This paper reviews the use of bioactive glasses as materials for periodontal repair. Periodontal disease causes bone loss, resulting in tooth loosening and eventual tooth loss. However, it can be reversed using bioactive glass, typically the original 45S5 formulation (Bioglass®) at the defect site. This is done either by plcing bioactive glass granules or a bioactive glass putty at the defect. This stimulates bone repair and causes the defect to disappear. Another use of bioactive glass in periodontics is to repair so-called furcation defects, i.e., bone loss due to infection at the intersection of the roots in multi-rooted teeth. This treatment also gives good clinical outcomes. Finally, bioactive glass has been used to improve outcomes with metallic implants. This involves either placing bioactive glass granules into the defect prior to inserting the metal implant, or coating the implant with bioactive glass to improve the likelihood of osseointegration. This needs the glass to be formulated so that it does not crack or debond from the metal. This approach has been very successful, and bioactive glass coatings perform better than those made from hydroxyapatite.

Recommendations for treating stage I-III periodontitis in the Taiwanese population: A consensus report from the Taiwan Academy of Periodontology

BACKGROUND/PURPOSE

Based on the fundamental of the S3-level clinical practice guideline (CPG) for treating stage I-III periodontitis developed by the European Federation of Periodontology (EFP), this consensus report aimed to develop treatment recommendations for treating periodontitis in the Taiwanese population.

METHODS

The report was constructed by experts from the Taiwan Academy of Periodontology. The following topics were reviewed: (a) the prevalence of periodontitis in Asia and current status of treatment in Taiwan; (b) specific anatomical considerations for treating periodontitis in Asians; (d) educational and preventive interventions and supragingival plaque control; (d) subgingival instrumentation and adjunctive treatment; (e) surgical periodontal therapy; and (f) maintenance and supportive periodontal care. Recommendations were made according to the evidences from the EFP CPG, the published literature and clinical studies in Asians, and the expert opinions.

RESULTS

The treatment recommendations for the Taiwanese population were generally in parallel with the EFP CPG, and extra cautions during treatment and maintenance phases were advised due to the anatomical variations, such as shorter root trunk, higher prevalence of supernumerary distolingual root and lingual bony concavity in mandibular posteriors, and thinner anterior labial plate, of the Asian population.

CONCLUSION

The EFP CPG could be adopted for treating periodontitis and maintaining periodontal health of the Taiwanese population, and anatomical variations should be cautious when the treatment is delivered.

Exposure to the bromodomain inhibitor N-methyl pyrrolidone blocks spermatogenesis in a hormonal and non-hormonal fashion

N-methyl pyrrolidone (NMP) is an FDA approved molecule used as an excipient in pharmaceutical industry. Besides having a central role in formulation of drugs, the most important function of any excipient is to guarantee the safety of the medicine during and after its administration. Several studies have shown that exposure to NMP and especially in rats produce a gonadotoxic effect leading to infertility. However, the mechanisms underlying the effect of NMP on male reproduction are unknown. The aim of this study was to assess the reproductive toxicity of NMP in male rats and to elucidate the underlying mechanism. Male Sprague Dawley rats were injected intraperitoneally, twice/ week, at a dose of 108 mg/ 100 g of body weight with NMP. Analysis of reproductive parameters revealed testicular atrophy in NMP treated animals compared to control animals. Germ cell composition within the seminiferous tubules was disturbed and manifested in an increase in number of cells with fragmented DNA. A subsequent decrease in number of spermatocytes and spermatids was observed. Alpha screen assay shows that NMP acts at the concentrations we applied in vivo as a low affinity inhibitor for BRDT (testis specific bromodomain protein). BRDT inhibition is mirrored by a significant decrease in the expression of early stage spermatocyte markers (lmna, aurkc and ccna1), during which BRDT expression predominates. A significant decrease in testosterone levels was also observed. Since NMP interferes with spermatogenesis on various levels, its use in humans must be carefully monitored.

Advance of Nano-Composite Electrospun Fibers in Periodontal Regeneration

Periodontitis is considered to be the main cause of tooth loss, which affects about 15% of the adult population around the world. Scaling and root-planning are the conventional treatments utilized to remove the contaminated tissue and bacteria, but eventually lead to the formation of a poor connection-long junctional epithelium. Therefore, regenerative therapies, such as guided tissue/bone regeneration (GTR/GBR) for periodontal regeneration have been attempted. GTR membranes, acting as scaffolds, create three-dimensional (3D) environment for the guiding of cell attachment, proliferation and differentiation, and play a significant role in periodontal regeneration. Nano-composite scaffolds based on electrospun nanofibers have gained great attention due to their ability to emulate natural extracellular matrix (ECM) that affects cell survival, attachment and reorganization. Promoted protein absorption, cellular reactions, activation of specific gene expression and intracellular signaling, and high surface area to volume ratio are also important properties of nanofibrous scaffolds. Moreover, several bioactive components, such as bioceramics and functional polymers can be easily blended into nanofibrous matrixes to regulate the physical-chemical-biological properties and regeneration abilities. Simultaneously, functional growth factors, proteins and drugs are also incorporated to regulate cellular reactions and even modify the local inflammatory microenvironment, which benefit periodontal regeneration and functional restoration. Herein, the progress of nano-composite electrospun fibers for periodontal regeneration is reviewed, including fabrication methods, compound types and processes, and surface modifications, etc. Significant proof-of-concept examples are utilized to illustrate the results of material characteristics, cellular interactions and periodontal regenerations. Finally, the existing limitations of nano-composite electrospun fibers and the development tendencies in future are also discussed.

Advanced Scaffolds for Dental Pulp and Periodontal Regeneration

No current therapy promotes root canal disinfection and regeneration of the pulp-dentin complex in cases of pulp necrosis. Antibiotic pastes used to eradicate canal infection negatively affect stem cell survival. Three-dimensional easy-to-fit antibiotic-eluting nanofibers, combined with injectable scaffolds, enriched or not with stem cells and/or growth factors, may increase the likelihood of achieving predictable dental pulp regeneration. Periodontitis is an aggressive disease that impairs the integrity of tooth-supporting structures and may lead to tooth loss. The latest advances in membrane biomodification to endow needed functionalities and technologies to engineer patient-specific membranes/constructs to amplify periodontal regeneration are presented.

Injectable formulations of poly(lactic acid) and its copolymers in clinical use

Poly(lactic acid) and its copolymers have revolutionized the field of drug delivery due to their excellent biocompatibility and tunable physico-chemical properties. These copolymers have served the healthcare sector by contributing many products to combat various diseases and for biomedical applications. This article provides a comprehensive overview of clinically used products of poly(lactic acid) and its copolymers. Multi-dimension information covering product approval, formulation aspects and clinical status is described to provide a panoramic overview of each product. Moreover, leading patented technologies and various clinical trials on these products for different applications are included. This review focuses on marketed injectable formulations of PLA and its copolymers.

A Clinical Evaluation of Biphasic Calcium Phosphate Alloplast with and without a Flowable Bioabsorbable Guided Tissue Regeneration Barrier in the Treatment of Mandibular Molar Class II Furcation Defects

BACKGROUND

Guided tissue regeneration (GTR) therapy has shown good results in the management of mandibular molar class II furcation defects. Advances in biomaterial sciences have developed alloplastic bone replacement graft materials and bioabsorbable GTR barrier membranes with good biologic response and handling properties. The aim of this study was to compare the attachment gain and the bone fill obtained with an alloplast [biphasic calcium phosphate (BCP) 60% hydroxyapatite (HA) and 40% beta tricalcium phosphate (b-TCP)] with and without a bioabsorbable GTR barrier [flowable poly (DL-lactide) (PLA) dissolved in N-methyl-2-pyrrolidone (NMP)] in the treatment of mandibular molar class II furcation defects.

MATERIALS AND METHODS

A total of 20 class II furcation defects were treated in 16 patients with chronic periodontitis in a comparative study. Ten defects were treated with Camceram(®) (BCP 60% HA and 40% - TCP) bone replacement graft material (group I) and 10 defects with a combination of Camceram® bone replacement graft material with Atrisorb® Freeflow™, bio-absorbable GTR barrier (flowable PLA dissolved in NMP) (group II). At baseline and at 6 months postsurgery, clinical parameters of vertical probing depth (PD) and horizontal probing depth (P-H), clinical attachment level (CAL), gingival recession (GR), and vertical depth of furcation defect (VDF) and horizontal depth of furcation defect (BP-H) were evaluated.

RESULTS

Statistical analysis was done with the Statistical Package for Social Sciences (SPSS) program. Intergroup comparisons made at 6 months postsurgery by unpaired Student's t-test showed mean reduction in PD in group I was 3.10 ± 0.73 mm and in group II was 3.20 ± 1.03 mm (p > 0.05). Mean reduction in P-H in group I was 1.60 ± 0.69 mm and in group II was 1.90 ± 0.73 mm (p > 0.05). Gain in CAL in group I was 2.80 ± 1.03 mm and in group II was 2.90 ± 0.94 mm (p > 0.05). Change in GR in group I was -0.30 ± 0.48 mm and in group II was -0.30 ± 0.48 (p > 0.05). Reduction in VDF in group I was 1.30 ± 0.67 mm and in group II was 1.80 ± 0.63 mm (p ≤ 0.01). Reduction in BP-H in group I was 1.30 ± 0.67 mm and in group II was 1.90 ± 0.73 mm (p ≤ 0.05).

CONCLUSION

It was concluded that the combination technique of BCP alloplast with a flowable bioabsorbable GTR barrier led to better results in regard to defect bone fill as compared with when the BCP alloplast alone was used.

Clinical evaluation of autologous platelet rich fibrin in horizontal alveolar bony defects

BACKGROUND

Horizontal bone loss is the most common periodontal problem confronting the clinician but has received little attention. Platelet rich fibrin (PRF) is a second generation platelet concentrate. The platelets, leucocytes, growth factors and cytokines contained within PRF make it a healing biomaterial with tremendous potential for bone and soft tissue regeneration.

AIM

This interventional clinical trial evaluates the clinical effectiveness of Autologous Platelet Rich Fibrin (PRF) in the management of horizontal bony defects.

SETTINGS AND DESIGN

Department of Periodontics. Design was Non Randomized Clinical Trial with split mouth design.

MATERIALS AND METHODS

A total of 45 sites with horizontal bone loss in 15 patients were studied, 15 sites were treated with PRF gel (experimental group I) and 15 sites were treated with PRF gel and PRF membrane (experimental group II). Control group (15 sites) were treated with open flap debridement.

STATISTICAL ANALYSIS

All the parameters were assessed at baseline and after nine months which included Pocket Depth (PD), Clinical Attachment level (CAL), Gingival Recession (REC) and Relative Crest Height (RCH). The mean changes at baseline and after 9 months within each group were compared using Wilcoxon Signed Ranks Test. The mean changes for each parameter between groups were compared using Kruskal Wallis Test.

RESULTS

Re-evaluation at nine months revealed that all groups showed a significant reduction in probing depth (1.1±0.38 mm in control, 1.73±0.53 mm in group I, 1.7±0.45 mm in group II)(p<0.05) and clinical attachment gain (0.86±0.58 mm in control, 1.56±0.62 mm in group I, 1.7±0.52 in group II)(p<0.05) as compared to baseline. Intergroup comparisons of reduction in probing depth and clinical attachment gain showed significant differences in the experimental groups as compared to control (p<0.05), but there was no significant difference between the experimental groups (p>0.05). There was no significant difference in gingival recession and radiographic bone levels at 9 months post surgery (p>0.05) in all the three groups.

CONCLUSION

Within the limitations of this study, it can be concluded that, clinically the use of PRF in both gel and membrane form is more effective than open flap debridement alone in the management of horizontal periodontal defects at nine months post surgery.

Biomaterials for periodontal regeneration: a review of ceramics and polymers

Periodontal disease is characterized by the destruction of periodontal tissues. Various methods of regenerative periodontal therapy, including the use of barrier membranes, bone replacement grafts, growth factors and the combination of these procedures have been investigated. The development of biomaterials for tissue engineering has considerably improved the available treatment options above. They fall into two broad classes: ceramics and polymers. The available ceramic-based materials include calcium phosphate (eg, tricalcium phosphate and hydroxyapatite), calcium sulfate and bioactive glass. The bioactive glass bonds to the bone with the formation of a layer of carbonated hydroxyapatite in situ. The natural polymers include modified polysaccharides (eg, chitosan,) and polypeptides (collagen and gelatin). Synthetic polymers [eg, poly(glycolic acid), poly(L-lactic acid)] provide a platform for exhibiting the biomechanical properties of scaffolds in tissue engineering. The materials usually work as osteogenic, osteoconductive and osteoinductive scaffolds. Polymers are more widely used as a barrier material in guided tissue regeneration (GTR). They are shown to exclude epithelial downgrowth and allow periodontal ligament and alveolar bone cells to repopulate the defect. An attempt to overcome the problems related to a collapse of the barrier membrane in GTR or epithelial downgrowth is the use of a combination of barrier membranes and grafting materials. This article reviews various biomaterials including scaffolds and membranes used for periodontal treatment and their impacts on the experimental or clinical management of periodontal defect.

Composition and characterization of in situ usable light cured dental drug delivery hydrogel system

Biodegradable polymers are compatible, permeable and nontoxic, thus they can provide a useful tool for drug delivery or tissue engineering. These polymers can form hydrogels, which are suitable vehicles for different types of materials e.g. drugs, bioactive molecules or cells. In the case of dentistry, photopolymerization is an obvious method to obtain in situ useable devices which can provide a more efficient way of tailoring drug release. A hydrogel system was developed based on poly-gamma-glutamic acid that was modified with methacryloyl groups to achieve this purpose. The resulting new reactive structure was proved by NMR spectroscopy. The swelling ratio of this type of hydrogel has been found remarkable, over 300 % after 24 h, and it can release 5 ng/mm(2) metronidazole. The prepared hydrogels were nontoxic as viability, cytotoxicity tests and cell morphology investigations proved it. These results render this model system an excellent candidate for use as an in situ curing local drug delivery device. The new photoactive system can be utilized in the treatment of periodontal diseases or raising the effectiveness of drugs used only in the minimal effective dose.

Use of an Autogenous Cortical Graft in Combination with Guided Tissue Regeneration for Treatment of an Infrabony Defect

Infrabony periodontal defects are common findings encountered during complete oral examinations. Treatment options for infrabony lesions are aimed at meeting client demands as well as patient needs. Deciding on how to treat these lesions depends on the nature and degree of disease present as well as having the materials available to improve the chances of achieving the greatest clinical success. Bone grafting of an infrabony defect of the left mandibular first molar tooth of a dog using an autogenous cortical graft harvested with a reusable bone grafter in combination with guided tissue regeneration is described.

A liquid membrane as a barrier membrane for guided bone regeneration

Membranes made of several different materials are available in the market, nonresorbable (e.g. ePTFE), resorbable (e.g. synthetic or collagen) and liguid applicable (e.g. Polyethylene glycol or Atrisorb). The purpose of the present study was to evaluate whether or not in situ application of Atrisorb could be used as a barrier membrane for guided bone regeneration. Ten patients with insufficient alveolar ridge width for implant placement participated in the study. Atrisorb in conjunction with various bone grafts was used to treat 10 different sites, 3 sites treated prior to implant placement and 7 sites in conjunction with implant placement. Augmented sites were allowed to heal for 3 to 7 months, with mean healing time of 4.7 months. Healing was uneventful with no major complications. Two sites experienced a flap dehiscence accompanied by barrier exposure during the initial healing period. Secondary healing was achieved soon after with no signs of infection, giving Atrisorb a barrier exposure rate of 20% for the present study, which corresponds to favorably to that of resorbable membranes. The liquid membrane has the potential of being a viable alternative to traditional resorbable membranes for use in GBR procedures.

Evaluation of a new biodegradable membrane to prevent gingival ingrowth into mandibular bone defects in minipigs

OBJECTIVE

The aim of this study was to test whether a synthetic, biodegradable membrane made of polyethylene glycol (PEG) can prevent soft-tissue ingrowth into alveolar defects.

MATERIAL AND METHODS

In each of 16 minipigs, three mandibular premolars were bilaterally extracted. Three months later, acute standardized defects (diameter 8 mm, depth 8 mm) were prepared. Four treatment modalities were randomly allocated to the defects: (1) PEG membrane plus collagen sponge, (2) polylactide (PLA) membrane plus collagen sponge, (3) collagen sponge alone, and (4) empty defect. Animals were sacrificed at 10 days (n=5), 21 days (n=5), or 2 months (n=6) after treatment. Qualitative and quantitative histological evaluations of soft-tissue ingrowth and bone regeneration were performed on nondecalcified ground sections. For statistical analysis, the Mann-Whitney-Wilcoxon test, the Kruskal-Wallis, and the paired t-test were applied. P-values were adjusted using the Dunnett-Hsu adjustment.

RESULTS

At 10 days, the PEG membrane group showed the least soft-tissue ingrowth (mean value -0.75 mm; range -1.35 to -0.10), followed by the PLA membrane group -0.18 mm (-0.80 to 0.44), the collagen group 0.04 mm (-0.65 to 0.73), and the empty defects 0.60 mm (-0.08 to 1.29). Statistically significant differences were observed between the PEG membrane group and the empty defects (P<0.05). At 21 days, the highest percentage of newly formed bone was found in the PEG membrane group (mean 28.4%; range 21.6-35.2) compared with 23.7% (16.9-30.5; PLA membrane), 15.2% (8.2-22.2; collagen group), and 21.6% (14.5-28.8; empty defects). Statistically significant differences were only found between the PEG membrane group and the collagen group (P<0.05). At 2 months, the tested parameters revealed no statistically significant differences between the groups.

CONCLUSION

The experimental PEG membrane applied in the present study successfully prevented collapse of the covering soft tissues to a degree similar to the PLA membrane. The combination of a collagen sponge and the PEG membrane showed the least soft-tissue ingrowth at 10 days and promoted more bone formation at 21 days.

Bone tissue engineering with novel rhBMP2-PLLA composite scaffolds

The aims of the present study were to fabricate a novel porous polylactic acid (PLLA) composite scaffold and evaluate the capacity of the scaffold in carrying recombinant bone morphogenetic protein 2 (rhBMP2) for engineering bone formation. The structures of the PLLA scaffolds were evaluated by SEM and the controlled release of rhBMP2 from the composite scaffolds was assayed by ELISA. Bone induction by the scaffolds loaded with or without rhBMP2 was performed in the calf muscle of twenty Wistar rats for 3, 7, 10, 14, and 28 days. Tissue specimens were examined by Masson's trichrome and von Kossa stainings, and immunohistochemistry of bone proteins. Our results indicated that a moderate foreign body reaction was found in control scaffolds, which lasted for 4 weeks. The addition of rhBMP2 to this novel scaffold dramatically alleviated the adverse responses to PLLA. Enhanced deposition of collagen matrix and endochondral formation were observed in rhBMP2-PLLA scaffolds at 7-10 days, compatible with an early release of rhBMP2 in the composite scaffolds. Bone sialoprotein and osteopontin were demonstrated simultaneously. Von Kossa staining was observed in the test group at 10-14 days. In conclusion, the PLLA scaffolds exhibited the capability of carrying rhBMP2 for inducing bone formation within 2 weeks. These results suggest that rhBMP2-PLLA scaffold may be applicable in tissue engineering.

Evaluation of an in situ formed synthetic hydrogel as a biodegradable membrane for guided bone regeneration

The aim of the present study was to test whether or not the application of an in situ formed synthetic hydrogel made of polyethylene glycol (PEG) used as a biodegradable membrane for guided bone regeneration will result in the same amount of bone regeneration as with the use of an expanded polytetrafluoro-ethylene (ePTFE) membrane. In eight New Zealand White rabbits, four evenly distributed 6 mm diameter defects were drilled into the calvarial bone. Three treatment modalities were evenly distributed among the 32 defects: hydroxyapatite (HA)/tricalciumphosphate (TCP) granules covered at the outer and inner surface with a PEG membrane (test), HA/TCP granules covered at the outer and inner surface with an ePTFE membrane (positive control) and HA/TCP granules alone without membranes (negative control). After 4 weeks, the animals were sacrificed and the calvarial bones were removed. The area fraction of newly formed bone was determined by histomorphometrical analysis of the vertical sections from the middle of the defect and by micro-computed tomography of the entire defect. Multiple regression analysis (SAS GLM) was used to model the amount of new bone formation. The quantitative histomorphometric analysis clearly revealed higher values of newly formed bone for the two membrane groups compared with the negative control group. The average area fractions of newly formed bone measured within the former defect amounted to 20.3+/-9.5% for the PEG membrane, 18.9+/-9.9% for the ePTFE membrane, and 7.3+/-5.3% for the sites with no membrane. The micro-computed tomography also showed higher values of new bone formation for the PEG and for the ePTFE groups compared with the negative control group. The GLM revealed a highly significant effect of the treatment on the amount of bone formation (P=0.0048). The values for the negative control group were significantly lower than the ones found in the PEG membrane group (P=0.0017), whereas the ePTFE membrane group showed no significant difference from the PEG membrane group. It is concluded that the PEG membrane can be used successfully as a biodegradable barrier membrane in the treatment of non-critical-size defects in the rabbit skull, and leads to similar amounts of bone regeneration as an ePTFE membrane.

Microbial colonization patterns predict the outcomes of surgical treatment of intrabony defects

AIM

To explore the impact of bacterial load and microbial colonization patterns on the clinical outcomes of periodontal surgery at deep intrabony defects.

MATERIALS AND METHODS

One hundred and twenty-two patients with advanced chronic periodontitis and at least one intrabony defect of >3 mm were recruited in 10 centres. Before recruitment, the infection control phase of periodontal therapy was completed. After surgical access and debridement, the regenerative material was applied in the test subjects, and omitted in the controls. At baseline and 1 year following the interventions, clinical attachment levels (CAL), pocket probing depths (PPD), recession (REC), full-mouth plaque scores and full-mouth bleeding scores were assessed. Microbial colonization of the defect-associated pocket was assessed using a DNA-DNA checkerboard analysis.

RESULTS

Total bacterial load and counts of red complex bacteria were negatively associated with CAL gains 1 year following treatment. The probability of achieving above median CAL gains (>3 mm) was significantly decreased by higher total bacterial counts, higher red complex and T. forsythensis counts immediately before surgery.

CONCLUSIONS

Presence of high bacterial load and specific periodontal pathogen complexes in deep periodontal pockets associated with intrabony defects had a significant negative impact on the 1 year outcome of surgical/regenerative treatment.