A QTL for osteoporosis detected in an F2 population derived from White Leghorn chicken lines divergently selected for bone index

Transcriptome profile reveals novel candidate genes associated with bone strength in end-of-lay hens

Bone weakness causes many problems such as osteoporosis, bone fractures, and economic loss, especially at the late stage of lay, in laying hen production. However, the genetic factors and molecular mechanism affecting the bone strength is still largely unknown. To elucidate the molecular mechanism and genetic factors affecting bone strength, a total of six cDNA libraries were constructed and used to compare genetic differences between tibia with higher（Group HBS）and lower（Group LBS）breaking strength in Hyline grey layers. A comparison between Groups HBS and LBS revealed nine differentially expressed genes, of which five were upregulated and four were downregulated in the LBS relative to the HBS in tibia. Our results showed novel candidate genes concerned with bone strength in the late laying period. These include transcription factor paired box protein Pax-5 (Pax5), tissue inhibitor of Metallopoteinase-4 (TIMP4), Kelch-like protein 14 (KLHL14), predicted MAGUK p55 subfamily member 7 isoform X4 (MPP7) and Osteoclast-associated Ig-like receptor (OSCAR). Our data provide a vital resource for discovering important candidate genes associated with bone strength and will help further study the molecular mechanisms for bone remodeling.

Genetic markers associated with bone composition in Rhode Island Red laying hens

BACKGROUND

Bone damage has welfare and economic impacts on modern commercial poultry and is known as one of the major challenges in the poultry industry. Bone damage is particularly common in laying hens and is probably due to the physiological link between bone and the egg laying process. Previous studies identified and validated quantitative trait loci (QTL) for bone strength in White Leghorn laying hens based on several measurements, including bone composition measurements on the cortex and medulla of the tibia bone. In a previous pedigree-based analysis, bone composition measurements showed heritabilities ranging from 0.18 to 0.41 and moderate to strong genetic correlations with tibia strength and density. Bone composition was measured using infrared spectroscopy and thermogravimetry. The aim of this study was to combine these bone composition measurements with genotyping data via a genome-wide association study (GWAS) to investigate genetic markers that contribute to genetic variance in bone composition in Rhode Island Red laying hens. In addition, we investigated the genetic correlations between bone composition and bone strength.

RESULTS

We found novel genetic markers that are significantly associated with cortical lipid, cortical mineral scattering, medullary organic matter, and medullary mineralization. Composition of the bone organic matter showed more significant associations than bone mineral composition. We also found interesting overlaps between the GWAS results for tibia composition traits, particularly for cortical lipid and tibia strength. Bone composition measurements by infrared spectroscopy showed more significant associations than thermogravimetry measurements. Based on the results of infrared spectroscopy, cortical lipid showed the highest genetic correlations with tibia density, which was negative (- 0.20 ± 0.04), followed by cortical CO3/PO4 (0.18 ± 0.04). Based on the results of thermogravimetry, medullary organic matter% and mineral% showed the highest genetic correlations with tibia density (- 0.25 ± 0.04 and 0.25 ± 0.04, respectively).

CONCLUSIONS

This study detected novel genetic associations for bone composition traits, particularly those involving organic matter, that could be used as a basis for further molecular genetic investigations. Tibia cortical lipids displayed the strongest genetic associations of all the composition measurements, including a significantly high genetic correlation with tibia density and strength. Our results also highlighted that cortical lipid may be a key measurement for further avian bone studies.

Breed and loading history influence in vivo skeletal strain patterns in pre-pubertal female chickens

The influence of loading history on in vivo strains within a given specie remains poorly understood, and although in vivo strains have been measured at the hindlimb bones of various species, strains engendered during modes of activity other than locomotion are lacking, particularly in non-human species. For commercial egg-laying chickens specifically, there is an interest in understanding their bones' mechanical behaviour, particularly during youth, to develop early interventions to prevent the high incidence of osteoporosis in this population. We measured in vivo mechanical strains at the tibiotarsus midshaft during steady activities (ground, uphill, downhill locomotion) and non-steady activities (perching, jumping, aerial transition landing) in 48 pre-pubescent female (egg-laying) chickens from two breeds that were reared in three different housing systems, allowing varying amounts and types of physical activity. Mechanical strain patterns differed between breeds, and were dependent on the activity performed. Mechanical strains were also affected by rearing environment: chickens that were restricted from performing dynamic load bearing activity due to caged-housing generally exhibited higher mechanical strain levels during steady, but not non-steady activities, compared to chickens with prior dynamic load-bearing activity experience. Among chickens with prior experience of dynamic load bearing activity, those reared in housing systems that allowed more frequent physical activity did not exhibit lower mechanical strains. In all groups, the tibiotarsus was subjected to a loading environment consisting of a combination of axial compression, bending, and torsion, with torsion being the predominant source of strain. Aerial transition landing produced the highest strain levels with unusual strain patterns compared to other activities, suggesting it may produce the strongest anabolic response. These results exemplify how different breeds within a given specie adapt to maintain different patterns of mechanical strains, and how benefits of physical activity in terms of resistance to strain are activity-type dependent and do not necessarily increase with increased physical activity. These findings directly inform controlled loading experiments aimed at studying the bone mechanoresponse in young female chickens and can also be associated to measures of bone morphology and material properties to understand how these features influence bone mechanical properties in vivo.

Development of an in vivo radiographic method with potential for use in improving bone quality and the welfare of laying hens through genetic selection

1. Genetic selection for bone quality can improve this, as it is heritable. A method was established using digital X-ray which took around 40 s in total and gave an image that allowed quantification of bone density from many appendicular bones.2. The tibiotarsus measurement of bone density on the live hen across the different experiments had correlations with post-mortem whole bone radiographic density from 0.62 to 0.7, similar to that between density and material properties for example. Differences between groups of hens, where calcium and phosphorus in the diet were manipulated, were detected within 3 weeks of treatment using live hen measurement (P < 0.001, n = 24).3. In a gage analysis, 'hen' explained more than 86% of the variance, demonstrating the ability to observe clear differences between hens. The effect of different operators' analysis on the contribution to variance was very low as was the repeated measurement of the same hen.4. The measurement of bone density on the live hen described in this paper represented major progress to a usable method for genetic selection to improve bone strength in laying hens. The method has the potential to reduce the number of animals needed to test nutritional and management interventions to improve bone health.

Untargeted metabolomics reveals the effect of rearing systems on bone quality parameters in chickens

The objective of this study was to investigate the effects of rearing systems on the bone quality parameters in chickens using a metabolomics strategy. A total of 419 male one-day-old chicks were randomly allocated to two groups, a floor rearing group (FRG, n = 173) and a cage rearing group (CRG, n = 246). At 6, 8, 10, and 12 weeks of age, all chickens were radiographed by a digital X-ray machine, and body weight was recorded. At 12 weeks of age, 12 birds were selected from each group to obtain tibia and femur, and bone quality parameters of bone mineral density (BMD), mineral content (BMC), breaking strength (BBS), stiffness, Young's modulus (YM), ash content, calcium content, and phosphorus content were determined. An untargeted metabolomics assay was performed to identify changes in the serum metabolic profile (n = 8 birds/group). The results showed that cage-reared chickens had wider tibiae and greater body weight compared with floor-reared chickens. There were no significant differences in BMC or BBS between the two groups (p > 0.05), but BMD, ash content, calcium content, and phosphorus content of the tibia and femur of FRG were significantly higher than those of CRG (p < 0.05). Greater stiffness and YM of the femur were also observed in birds raised in the FRG compared with those raised in the CRG (p < 0.05). Taken together, the results suggest that rearing systems affected bone quality parameters. Furthermore, 148 and 149 differential metabolites were identified in positive and negative ion modes by LC-MS/MS analysis, among which 257 metabolites were significantly correlated with 16 bone quality parameters, including leucine, myristoleic acid, glycocholic acid, and N-phenylacetamide. KEGG analysis indicated that 15 metabolic pathways, including six pathways of amino acid metabolism, two pathways of lipid metabolism, and two pathways of carbohydrate metabolism, were responsible for bone quality. Overall, the present study demonstrated the effect of rearing systems on bone quality parameters, and identified several metabolites and metabolic pathways associated with bone quality parameters.

Genetics of tibia bone properties of crossbred commercial laying hens in different housing systems

Osteoporosis and bone fractures are a severe problem for the welfare of laying hens, with genetics and environment, such as housing system, each making substantial contributions to bone strength. In this work, we performed genetic analyses of bone strength, bone mineral density, and bone composition, as well as body weight, in 860 commercial crossbred laying hens from 2 different companies, kept in either furnished cages or floor pens. We compared bone traits between housing systems and crossbreds and performed a genome-wide association study of bone properties and body weight. As expected, the 2 housing systems produced a large difference in bone strength, with layers housed in floor pens having stronger bones. These differences were accompanied by differences in bone geometry, mineralization, and chemical composition. Genome scans either combining or independently analyzing the 2 housing systems revealed no genome-wide significant loci for bone breaking strength. We detected 3 loci for body weight that were shared between the housing systems on chromosomes 4, 6, and 27 (either genome-wide significant or suggestive) and these coincide with associations for bone length. In summary, we found substantial differences in bone strength, content, and composition between hens kept in floor pens and furnished cages that could be attributed to greater physical activity in pen housing. We found little evidence for large-effect loci for bone strength in commercial crossbred hens, consistent with a highly polygenic architecture for bone strength in the production environment. The lack of consistent genetic associations between housing systems in combination with the differences in bone phenotypes could be due to gene-by-environment interactions with housing system or a lack of power to detect shared associations for bone strength.

Comparative analysis of the morphology, chemistry and structure of the tibiotarsus, humerus and keel bones in laying hens

1. Bone properties are adapted to their specific functions in the animal, so various types of bones develop different characteristics depending on their location in the skeleton.2. The aim of this research was to compare the chemical composition, mineral characteristics and structural organisation in tibiotarsus, humerus and keel bones as representatives of hen skeletal mineralisation. Complementary analytical techniques, such as X-ray radiography, optical and electron microscopy, thermogravimetry and 2D X-ray diffraction, were used for characterisation.3. The humerus had a thinner cortex and cortical bone mineral had higher crystallinity and a greater degree of crystal orientation than the tibiotarsus. The humerus generally lacks medullary bone although, when present, it has a higher mineral content than seen in the tibiotarsus. These differences were attributed to the different forces that stimulate bone formation and remodelling.4. The keel cortical bone had a lower degree of mineralisation than the tibiotarsus or humerus. Its degree of mineralisation decreased from the cranial to the distal end of the bone. This gradient may affect keel mechanical properties, making it more prone to deformation and fractures.5. Data from studying different bones in laying hens can help to understand mineralisation as well as finding solutions to prevent osteoporosis-related fractures.

Identification and Functional Annotation of Genes Related to Bone Stability in Laying Hens Using Random Forests

Skeletal disorders, including fractures and osteoporosis, in laying hens cause major welfare and economic problems. Although genetics have been shown to play a key role in bone integrity, little is yet known about the underlying genetic architecture of the traits. This study aimed to identify genes associated with bone breaking strength and bone mineral density of the tibiotarsus and the humerus in laying hens. Potentially informative single nucleotide polymorphisms (SNP) were identified using Random Forests classification. We then searched for genes known to be related to bone stability in close proximity to the SNPs and identified 16 potential candidates. Some of them had human orthologues. Based on our findings, we can support the assumption that multiple genes determine bone strength, with each of them having a rather small effect, as illustrated by our SNP effect estimates. Furthermore, the enrichment analysis showed that some of these candidates are involved in metabolic pathways critical for bone integrity. In conclusion, the identified candidates represent genes that may play a role in the bone integrity of chickens. Although further studies are needed to determine causality, the genes reported here are promising in terms of alleviating bone disorders in laying hens.

Dietary betaine reduces plasma homocysteine concentrations and improves bone strength in laying hens

1. This study tested the hypothesis that the methyl-donor properties of betaine could reduce homocysteine concentrations, which has been recognised in a previous genetics study to be linked to bone quality. This was combined with phytase treatment, as phosphorus is critical for bone mineralisation.2. Using a 2 × 2 factorial arrangement, a total of 1920 Lohmann LSL-lite chickens housed as 24 replicates of 20 chickens were fed one of four diets containing dietary betaine (0 or 1000 mg/kg) and phytase (300 or 1000 FTU/kg) from one day old until end-of-lay. Blood and bone samples were collected at 45 and 70 weeks of age.3. Hens fed betaine had lower plasma homocysteine level (P < 0.05), higher tibia breaking strength (P < 0.05) and higher tibia bone density (P < 0.05).4. Egg production and quality was excellent throughout the study and were not affected by the dietary treatments.5. The addition of dietary betaine was successful at reducing plasma homocysteine concentrations and improving bone strength in laying hens, which could be used as an intervention to alleviate welfare concerns.

Relationship between Bone Quality, Egg Production and Eggshell Quality in Laying Hens at the End of an Extended Production Cycle (105 Weeks)

(1) Background: Nowadays the industry aims to improve lay persistency for extended cycles (100 weeks or longer) to make egg production more sustainable. However, intensive egg production challenges hen health, inducing severe osteoporosis and the incidence of bone fractures. In this study, the relationship between bone quality and egg production, and/or eggshell quality, was evaluated at the end of an extended laying cycle of 100 weeks, comparing groups of hens with different production and eggshell quality parameters; (2) Methods: Quality parameters of egg (as weight, egg white height), eggshell (as thickness, weight, breaking strength, elasticity and microstructure) and tibiae bone (weight, diameter, cortical thickness, ash weight, breaking strength, medullary bone) were determined; (3) Results: Hens from groups with a high egg production and good eggshell quality have poorer bone quality (lower ash weight and lesser amount of medullary bone). However, Pearson's correlation analysis shows no clear relationship between bone and egg/eggshell parameters. (4) Conclusions: Bone and egg production/eggshell quality are independent and can be improved separately. Medullary bone has an important contribution to bone mechanical properties, being important to accumulate enough bone medullary bone early in life to maintain skeletal integrity and eggshell quality in old hens.

No evidence that selection for egg production persistency causes loss of bone quality in laying hens

Background

The physiological adaptations that have evolved for egg laying make hens susceptible to bone fractures and keel bone damage. In modern laying hen breeds, longer periods of egg laying could result in a greater risk of poor bone quality, and selection for increased egg production has frequently been stated to be a cause. However, the existing literature does not support this hypothesis. To test the hypothesis that egg production is associated with quality, breaking strength and density of bone, genetic correlations between these traits were estimated in White Leghorn and Rhode Island Red breeds. Genetic correlations of cortical and medullary bone material chemical properties with bone quality were also estimated, in order to identify methods to improve bone quality with appropriately targeted measurement of key traits.

Results

Estimates of heritability for bone quality traits were moderate (0.19–0.59) for both White Leghorn and Rhode Island Red breeds, except for the keel bone trait, which had a heritability estimate equal to zero. There was no evidence for genetic or phenotypic relationships between post-peak egg production and bone quality. In the White Leghorn breed, the estimate of the genetic correlation between pre-peak production/age at first egg and bone quality was significant and negative (− 0.7 to − 0.4). Estimates of heritability of thermogravimetric measurements of tibial medullary bone mineralisation were significant (0.18–0.41), as were estimates of their genetic correlations with tibia breaking strength and density (0.6–0.9).

Conclusions

The low genetic correlation of post-peak egg production with bone quality suggests that selection for increased persistency of egg production may not adversely affect bone quality. Onset of puberty and mineralisation of the medullary bone, which is a specialised adaptation for egg laying, were identified as important factors associated with the quality of the skeleton later during egg production. These are traits for which genetic, as well as environmental and management factors can positively impact the overall quality of the skeleton of laying hens.

Explanations for keel bone fractures in laying hens: are there explanations in addition to elevated egg production?

The current article served to provide the most up-to-date information regarding the causes of keel bone fracture. Although elevated and sustained egg production is likely a major contributing factor toward fractures, new information resulting from the development of novel methodologies suggests complementary causes that should be investigated. We identified 4 broad areas that could explain variation and increased fractures independent of or complementing elevated and sustained egg production: the age at first egg, late ossification of the keel, predisposing bone diseases, and inactivity leading to poor bone health. We also specified several topics that future research should target, which include continued efforts to link egg production and bone health, examination of noncommercial aves and traditional breeds, manipulating of age at first egg, a detailed histological and structural analysis of the keel, assessment of prefracture bone condition, and the relationship between individual activity patterns and bone health.

An eQTL in the cystathionine beta synthase gene is linked to osteoporosis in laying hens

BACKGROUND

Skeletal damage is a challenge for laying hens because the physiological adaptations required for egg laying make them susceptible to osteoporosis. Previously, we showed that genetic factors explain 40% of the variation in end of lay bone quality and we detected a quantitative trait locus (QTL) of large effect on chicken chromosome 1. The aim of this study was to combine data from the commercial founder White Leghorn population and the F2 mapping population to fine-map this QTL and understand its function in terms of gene expression and physiology.

RESULTS

Several single nucleotide polymorphisms on chromosome 1 between 104 and 110 Mb (galGal6) had highly significant associations with tibial breaking strength. The alternative genotypes of markers of large effect that flanked the region had tibial breaking strengths of 200.4 vs. 218.1 Newton (P < 0.002) and, in a subsequent founder generation, the higher breaking strength genotype was again associated with higher breaking strength. In a subsequent generation, cortical bone density and volume were increased in individuals with the better bone genotype but with significantly reduced medullary bone quality. The effects on cortical bone density were confirmed in a further generation and was accompanied by increased mineral maturity of the cortical bone as measured by infrared spectrometry and there was evidence of better collagen cross-linking in the cortical bone. Comparing the transcriptome of the tibia from individuals with good or poor bone quality genotypes indicated four differentially-expressed genes at the locus, one gene, cystathionine beta synthase (CBS), having a nine-fold higher expression in the genotype for low bone quality. The mechanism was cis-acting and although there was an amino-acid difference in the CBS protein between the genotypes, there was no difference in the activity of the enzyme. Plasma homocysteine concentration, the substrate of CBS, was higher in the poor bone quality genotype.

CONCLUSIONS

Validated markers that predict bone strength have been defined for selective breeding and a gene was identified that may suggest alternative ways to improve bone health in addition to genetic selection. The identification of how genetic variants affect different aspects of bone turnover shows potential for translational medicine.

Genetic variation and potential for genetic improvement of cuticle deposition on chicken eggs

Background

The cuticle is an invisible glycosylated protein layer that covers the outside of the eggshell and forms a barrier to the transmission of microorganisms. Cuticle-specific staining and in situ absorbance measurements have been used to quantify cuticle deposition in several pure breeds of chicken. For brown eggs, a pre-stain and a post-stain absorbance measurement is required to correct for intrinsic absorption by the natural pigment. For white eggs, a post-stain absorbance measurement alone is sufficient to estimate cuticle deposition. The objective of the research was to estimate genetic parameters and provide data to promote adoption of the technique to increase cuticle deposition and reduce vertical transmission of microorganisms.

Results

For all pure breeds examined here, i.e. Rhode Island Red, two White Leghorns, White Rock and a broiler breed, the estimate of heritability for cuticle deposition from a meta-analysis was moderately high (0.38 ± 0.04). In the Rhode Island Red breed, the estimate of the genetic correlation between measurements recorded at early and late times during the egg-laying period was ~ 1. There was no negative genetic correlation between cuticle deposition and production traits. Estimates of the genetic correlation of cuticle deposition with shell color ranged from negative values or 0 in brown-egg layers to positive values in white- or tinted-egg layers. Using the intrinsic fluorescence of tryptophan in the cuticle proteins to quantify the amount of cuticle deposition failed because of complex quenching processes. Tryptophan fluorescence intensity at 330 nm was moderately heritable, but there was no evidence of a non-zero genetic correlation with cuticle deposition. This was complicated furthermore by a negative genetic correlation of fluorescence with color in brown eggs, due to the quenching of tryptophan fluorescence by energy transfer to protoporphyrin pigment. We also confirmed that removal of the cuticle increased reflection of ultraviolet wavelengths from the egg.

Conclusions

These results provide additional evidence for the need to incorporate cuticle deposition into breeding programs of egg- and meat-type birds in order to reduce vertical and horizontal transmission of potentially pathogenic organisms and to help improve biosecurity in poultry.

Electronic supplementary material

The online version of this article (10.1186/s12711-019-0467-5) contains supplementary material, which is available to authorized users.

Short tandem repeats and methylation in the promoter region affect expression of cystathionine beta-synthase gene in the laying hen

Homocysteine can be converted to cysteine via the transsulfuration pathway where cystathionine beta-synthase (CBS) is a rate-limiting enzyme. Homocysteine is thought to play a role in bone remodelling and strength. Previous results indicated that some of the difference in bone strength of end-of-lay hens may be associated with CBS expression level. To investigate if differences in the promoter region of the CBS gene might be responsible for observed differences in gene expression between CBS alleles post mortem- and in-vitro expression studies have been undertaken. Transfection of the DF-1 avian cell line with a series of deletion fragments of the 5' promoter, or constructs containing three CBS allele sequences, with a luciferase reporter revealed that a core region of -155 to +131 bp in the CBS promoter was essential for mRNA expression. We found that a variable number of short tandem repeats (7 nucleotide motif and 6 nucleotide repeats) in the core region of the promoter affecting the transcriptional activity and a strong effect for gene expression. However, methylation of the 6 nucleotide repeats varied between allelic variants and these maybe responsible for differences in promoter activity. Our findings indicated variable short tandem repeats and the differentially methylated sites in the promoter region may be responsible for CBS expression differences in the bone of laying hens.

Quantitative trait loci for morphometric and mineral composition traits of the tibia bone in a broiler × layer cross

Many economic losses occur in the poultry industry due to leg fragility. Knowing the genomic regions that influence traits associated with the growth and composition of the leg's bone can help to improve the selection process leading to increased leg resistance to fracture. The present study aimed to map quantitative trait loci (QTL) for mineral composition and morphometric traits of the tibia in 478 animals from an F2 broiler × layer cross. The measurement of weight, length and width of Tibia was carried out at 42 days of age. Ash, dry matter, levels of calcium (Ca), phosphorus (P), magnesium (Mg), Zinc (Zn) and Calcium:Phosphorus (Ca:P) ratio were also recorded. The population was genotyped for 128 microsatellite markers and one single nucleotide polymorphism, covering 2630 cM of the chicken genome. A likelihood ratio test was performed to find QTLs. Additive and dominance effects of the QTLs were included in the model. In the chromosomes 2 (GGA2), 6 (GGA6), 8 (GGA8), 24 (GGA24) and 26 (GGA26) some suggestive QTLs (P&lt;0.00276) were mapped for tibia weight (GGA2 and GGA26), ash percentage (GGA2 and GGA6), dry matter percentage (GGA2), Ca (GGA8 and GGA24) and Ca:P ratio (GGA8), many of which are close to genes already identified as good candidates for those traits. The suggestive QTL on GGA2 has a pleiotropic effect on ash percentage, dry matter and bone weight, whereas in the GGA8 there seems to be two QTLs, one for Ca and another for Ca:P ratio. Thus, this study identified at least five genomic regions, in different chromosomes, that can be targeted for further research to identify potential mutations influencing the development and composition of leg bones in Gallus gallus.

Genome-wide association study for bone strength in laying hens

Bone fracture in egg laying hens is a growing welfare and economic concern in the industry. Although environmental conditions and management (especially nutrition) can exacerbate it, the primary cause of bone weakness and the resulting fractures is believed to have a genetic basis. To test this hypothesis, we performed a genome-wide association study to identify the loci associated with bone strength in laying hens. Genotype and phenotype data were obtained from 752 laying hens belonging to the same pure line population. These hens were genotyped for 580,961 SNPs, with 232,021 SNPs remaining after quality control. Each of the SNPs were tested for association with tibial breaking strength using the family-based score test for association. A total of 52 SNPs across chromosomes 1, 3, 8, and 16 were significantly associated with tibial breaking strength with the genome-wide significance threshold set as a corrected P value of 10e-5. Based on the local linkage disequilibrium around the significant SNPs, 5 distinct and novel QTLs were identified on chromosomes 1 (2 QTLs), 3 (1 QTL), 8 (1 QTL) and 16 (1 QTL). The strongest association was detected within the QTL region on chromosome 8, with the most significant SNP having a corrected P value of 4e-7. A number of candidate genes were identified within the QTL regions, including the BRD2 gene that is required for normal bone physiology. Bone-related pathways involving some of the genes were also identified including chloride channel activity, which regulates bone reabsorption, and intermediate filament organization, which plays a role in the regulation of bone mass. Our result supports previous studies that suggest that bone strength is highly regulated by genetics. It is therefore possible to reduce bone fractures in laying hens through genetic selection and ultimately improve hen welfare.

Influence of physical activity on tibial bone material properties in laying hens

Laying hens develop a type of osteoporosis that arises from a loss of structural bone, resulting in high incidence of fractures. In this study, a comparison of bone material properties was made for lines of hens created by divergent selection to have high and low bone strength and housed in either individual cages, with restricted mobility, or in an aviary system, with opportunity for increased mobility. Improvement of bone biomechanics in the high line hens and in aviary housing was mainly due to increased bone mass, thicker cortical bone and more medullary bone. However, bone material properties such as cortical and medullary bone mineral composition and crystallinity as well as collagen maturity did not differ between lines. However, bone material properties of birds from the different type of housing were markedly different. The cortical bone in aviary birds had a lower degree of mineralization and bone mineral was less mature and less organized than in caged birds. These differences can be explained by increased bone turnover rates due to the higher physical activity of aviary birds that stimulates bone formation and bone remodeling. Multivariate statistical analyses shows that both cortical and medullary bone contribute to breaking strengthThe cortical thickness was the single most important contributor while its degree of mineralization and porosity had a smaller contribution. Bone properties had poorer correlations with mechanical properties in cage birds than in aviary birds presumably due to the greater number of structural defects of cortical bone in cage birds.

Genetic architecture of bone quality variation in layer chickens revealed by a genome-wide association study

Skeletal problems in layer chickens are gaining attention due to animal welfare and economic losses in the egg industry. The genetic improvement of bone traits has been proposed as a potential solution to these issues; however, genetic architecture is not well understood. We conducted a genome-wide association study (GWAS) on bone quality using a sample of 1534 hens genotyped with a 600 K Chicken Genotyping Array. Using a linear mixed model approach, a novel locus close to GSG1L, associated with femur bone mineral density (BMD), was uncovered in this study. In addition, nine SNPs in genes were associated with bone quality. Three of these genes, RANKL, ADAMTS and SOST, were known to be associated with osteoporosis in humans, which makes them good candidate genes for osteoporosis in chickens. Genomic partitioning analysis supports the fact that common variants contribute to the variations of bone quality. We have identified several strong candidate genes and genomic regions associated with bone traits measured in end-of-lay cage layers, which accounted for 1.3–7.7% of the phenotypic variance. These SNPs could provide the relevant information to help elucidate which genes affect bone quality in chicken.

Increasing persistency in lay and stabilising egg quality in longer laying cycles. What are the challenges?

In the past 50 years, selection starting initially at the breed level and then using quantitative genetics coupled with a sophisticated breeding pyramid, has resulted in a very productive hybrid for a variety of traits associated with egg production. One major trait currently being developed further is persistency of lay and the concept of the "long life" layer. Persistency in lay however cannot be achieved without due consideration of how to sustain egg quality and the health and welfare of the birds in longer laying cycles. These multiple goals require knowledge and consideration of the bird's physiology, nutritional requirements, which vary depending on age and management system, reproductive status and choice of the selection criteria applied. The recent advent of molecular genetics offers considerable hope that these multiple elements can be balanced for the good of all in the industry including the hens. The "long life" layer, which will be capable of producing 500 eggs in a laying cycle of 100 weeks, is therefore on the horizon, bringing with it the benefits of a more efficient utilisation of diminishing resources, including land, water, raw materials for feed as well as a reduction in waste, and an overall reduced carbon footprint.

Genetic selection to increase bone strength affects prevalence of keel bone damage and egg parameters in commercially housed laying hens

The prevalence of keel bone damage as well as external egg parameters of 2 pure lines divergently selected for high (H) and low (L) bone strength were investigated in 2 aviary systems under commercial conditions. A standard LSL hybrid was used as a reference group. Birds were kept mixed per genetic line (77 hens of the H and L line and 201 or 206 hens of the LSL line, respectively, per pen) in 8 pens of 2 aviary systems differing in design. Keel bone status and body mass of 20 focal hens per line and pen were assessed at 17, 18, 23, 30, 36, 43, 52, and 63 wk of age. External egg parameters (i.e., egg mass, eggshell breaking strength, thickness, and mass) were measured using 10 eggs per line at both 38 and 57 wk of age. Body parameters (i.e. tarsus and third primary wing feather length to calculate index of wing loading) were recorded at 38 wk of age and mortality per genetic line throughout the laying cycle. Bone mineral density (BMD) of 15 keel bones per genetic line was measured after slaughter to confirm assignment of the experimental lines. We found a greater BMD in the H compared with the L and LSL lines. Fewer keel bone fractures and deviations, a poorer external egg quality, as well as a lower index of wing loading were found in the H compared with the L line. Mortality was lower and production parameters (e.g., laying performance) were higher in the LSL line compared with the 2 experimental lines. Aviary design affected prevalence of keel bone damage, body mass, and mortality. We conclude that selection of specific bone traits associated with bone strength as well as the related differences in body morphology (i.e., lower index of wing loading) have potential to reduce keel bone damage in commercial settings. Also, the housing environment (i.e., aviary design) may have additive effects.

Genetic determinism of bone and mineral metabolism in meat-type chickens: A QTL mapping study

Skeletal integrity in meat-type chickens is affected by many factors including rapid growth rate, nutrition and genetics. To investigate the genetic basis of bone and mineral metabolism, a QTL detection study was conducted in an intercross between two lines of meat-type chickens divergently selected for their high (D +) or low (D -) digestive efficiency. Tibia size (length, diameter, volume) and ash content were determined at 3 weeks of age as well as phosphorus (P) retention and plasma concentration. Heritability of these traits and their genetic correlations with digestive efficiency were estimated. A QTL mapping study was performed using 3379 SNP markers. Tibia size, weight, ash content and breaking strength were highly heritable (0.42 to 0.61). Relative tibia diameter and volume as well as P retention were strongly and positively genetically correlated with digestive efficiency (0.57 to 0.80). A total of 35 QTL were identified (9 for tibia weight, 13 for tibia size, 5 for bone strength, 5 for bone mineralization, 2 for plasma P concentration and 1 for P retention). Six QTL were genome-wide significant, and 3 QTL for tibia relative volume, weight and ash weight on chromosome 6 were fixed, the positive allele coming from the D-line. For two QTL for ash content on chromosome 18 and relative tibia length on chromosome 26, the confidence intervals were small enough to identify potential candidate genes. These findings support the evidence of multiple genetic loci controlling bone and mineral metabolism. The identification of candidate genes may provide new perspectives in the understanding of bone regulation, even beyond avian species.

Genetic regulation of bone strength: a review of animal model studies

Population- and family-based studies have established that fragility fracture risk is heritable; yet, the genome-wide association studies published to date have only accounted for a small fraction of the known variation for fracture risk of either the femur or the lumbar spine. Much work has been carried out using animal models toward finding genetic loci that are associated with bone strength. Studies using animal models overcome some of the issues associated with using patient data, but caution is needed when interpreting the results. In this review, we examine the types of tests that have been used for forward genetics mapping in animal models to identify loci and/or genes that regulate bone strength and discuss the limitations of these test methods. In addition, we present a summary of the quantitative trait loci that have been mapped for bone strength in mice, rats and chickens. The majority of these loci co-map with loci for bone size and/or geometry and thus likely dictate strength via modulating bone size. Differences in bone matrix composition have been demonstrated when comparing inbred strains of mice, and these matrix differences may be associated with differences in bone strength. However, additional work is needed to identify loci that act on bone strength at the materials level.

Unraveling the associations of osteoprotegerin gene with production traits in a paternal broiler line

Improvements on growth and carcass traits in the poultry industry have been achieved by intense selection for heavier chickens at early ages. This faster growth has caused serious problems due to insufficient skeletal structure development needed to support the musculature of modern broilers. The osteoprotegerin gene (OPG), located on GGA2, is an important regulator of bone metabolism and reabsorption, being suggestive as a possible functional candidate gene associated with bone integrity in chickens. This study reports associations of a single nucleotide polymorphism (SNP) in the OPG gene with production traits in a parental broiler line. Different phenotypic groups were evaluated: performance, carcass and skeletal traits. SNPs were identified within the OPG gene and the most informative SNP g.9144C > G was chosen for association analyses. Chickens (n = 1230) were genotyped using PCR-RFLP. The association was carried out with QxPaK v4.0 software using a mixed model including sex, hatch and SNP as fixed effects, and the infinitesimal and residual as random effects. The OPG SNP was associated with important traits as body weight at 21 days, weights of tibia and drumstick skin, leg muscle yield, and tibia breaking strength (P < 0.05). Associations were explained by the additive effect of the SNP and the additive effect within sex. This SNP could be considered a potential marker to improve bone resistance in chickens; however, caution should be taken because of its negative effect in other important traits evaluated in this study. Furthermore, these findings suggest a possible involvement of the OPG gene in fat deposition in poultry.

Bone mineral density QTL at sexual maturity and end of lay

1. An F₂ cross of a broiler male line and a White Leghorn layer line was used to identify quantitative trait loci (QTL) for bone density at the onset of lay and at the end of the laying period. A total of 686 measures of humeral bone density were available for analysis. 2. There was no evidence for epistasis. 3. Genome-wide significant QTL for bone density at the onset of lay were identified on chromosomes 1 (311 cM) and 8 (2 cM) and on chromosomes 1 (311 cM), 3 (57 cM) and 8 (2 cM) with a covariate for the number of yellow follicles (a proxy for the concentration of circulating oestrogen). 4. Evidence for only 4 chromosome-wide suggestive QTL were detected at the end of lay (72 weeks). 5. Analysis of the combined data confirmed two genome-wide suggestive QTL on chromosome 1 (137 and 266 cM) and on chromosomes 8 (2 cM) and 9 (10 cM) in analyses with or without the covariate. 6. Positive QTL alleles came from the broiler line with the exception of 2 suggestive QTL at the onset of lay on chromosomes 3 and 5 in an analysis with the covariate. 7. In general, QTL acted additively, except that dominant effects were identified for three suggestive QTL at the onset of lay on chromosomes 3 (57 and 187 cM) and 5 (9 cM). 8. The significant QTL in this study were at similar locations to QTL identified in a range of crosses in other publications, suggesting that they are prime candidates for the search for genes and mutations that could be used as selection criteria to improve bone strength and decrease fractures in commercial laying hens.

Development of an ex vivo protocol to model bone fracture in laying hens resulting from collisions

Fractures of the keel bone, a bone extending ventrally from the sternum, are a serious health and welfare problem in free range laying hens. Recent findings suggest that a major cause of keel damage within extensive systems is collisions with internal housing structures, though investigative efforts have been hindered by difficulties in examining mechanisms and likely influencing factors at the moment of fracture. The objectives of this study were to develop an ex vivo impact protocol to model bone fracture in hens caused by collision, to assess impact and bird-related factors influencing fracture occurrence and severity, and to identify correlations of mechanical and structural properties between different skeletal sites. We induced keel bone fractures in euthanized hens using a drop-weight impact tester able to generate a range of impact energies, producing fractures that replicate those commonly found in commercial settings. The results demonstrated that impact energies of a similar order to those expected in normal housing were able to produce fractures, and that greater collision energies resulted in an increased likelihood of fractures and of greater severity. Relationships were also seen with keel’s lateral surface bone mineral density, and the peak reactive force (strength) at the base of the manubrial spine. Correlations were also identified between the keel and long bones with respect to both strength and bone mineral density. This is the first study able to relate impact and bone characteristics with keel bone fracture at the moment of collision. Greater understanding of these relationships will provide means to reduce levels of breakage and severity in commercial systems.

Differential gene expression from genome-wide microarray analyses distinguishes Lohmann Selected Leghorn and Lohmann Brown layers

The Lohmann Selected Leghorn (LSL) and Lohmann Brown (LB) layer lines have been selected for high egg production since more than 50 years and belong to the worldwide leading commercial layer lines. The objectives of the present study were to characterize the molecular processes that are different among these two layer lines using whole genome RNA expression profiles. The hens were kept in the newly developed small group housing system Eurovent German with two different group sizes. Differential expression was observed for 6,276 microarray probes (FDR adjusted P-value <0.05) among the two layer lines LSL and LB. A 2-fold or greater change in gene expression was identified on 151 probe sets. In LSL, 72 of the 151 probe sets were up- and 79 of them were down-regulated. Gene ontology (GO) enrichment analysis accounting for biological processes evinced 18 GO-terms for the 72 probe sets with higher expression in LSL, especially those taking part in immune system processes and membrane organization. A total of 32 enriched GO-terms were determined among the 79 down-regulated probe sets of LSL. Particularly, these terms included phosphorus metabolic processes and signaling pathways. In conclusion, the phenotypic differences among the two layer lines LSL and LB are clearly reflected in their gene expression profiles of the cerebrum. These novel findings provide clues for genes involved in economically important line characteristics of commercial laying hens.

How genomics has informed our understanding of the pathogenesis of osteoporosis

Osteoporosis is a skeletal disorder characterized by compromised bone strength that predisposes a person to an increased risk of fracture. Osteoporosis is a complex trait that involves multiple genes, environmental factors, and gene-gene and gene-environment interactions. Twin and family studies have indicated that between 25% and 85% of the variation in bone mass and other skeletal phenotypes is heritable, but our knowledge of the underlying genes is limited. Bone mineral density is the most common assessment for diagnosing osteoporosis and is the most often used quantitative value in the design of genetic studies. In recent years, our understanding of the pathophysiology of osteoporosis has been greatly facilitated by advances brought about by the Human Genome Project. Genetic approaches ranging from family studies of monogenic traits to association studies with candidate genes, to whole-genome scans in both humans and animals have identified a small number of genes that contribute to the heritability of bone mass. Studies with transgenic and knockout mouse models have revealed major new insights into the biology of many of these identified genes, but much more needs to be learned. Ultimately, we hope that by revealing the underlying genetics and biology driving the pathophysiology of osteoporosis, new and effective treatment can be developed to combat and possibly cure this devastating disease. Here we review the rapidly evolving field of the genomics of osteoporosis with a focus on important gene discoveries, new biological/physiological paradigms that are emerging, and many of the unanswered questions and hurdles yet to be overcome in the field.

New hypotheses on the function of the avian shell gland derived from microarray analysis comparing tissue from juvenile and sexually mature hens

Activation of the shell gland region of the avian oviduct is mediated by ovarian steroids. To understand more extensively how shell glands are maintained and function, we have compared gene expression in the shell glands from juvenile and laying hens using a chicken cDNA microarray. Average expression profiles of juvenile and sexually mature shell glands were compared resulting in the identification of 266 differentially regulated genes. Reverse transcription quantitative polymerase chain reaction confirmed expression differences. The differentially expressed genes included several with known involvement in shell gland function, including ion transport and shell matrix proteins. There were also many unpredicted differentially expressed genes, and for some we propose hypotheses for their functions. These include those encoding (a) osteoprotegerin, a decoy death receptor for receptor activator of nuclear factor NFkB ligand (RANKL) and tumor necrosis factor-related apoptosis-inducing ligand (TRAIL), that in the shell gland, may prevent apoptosis and/or may have an endocrine effect by preventing RANKL's action on bone osteoclasts that mobilize stored calcium; (b) prostatic acid phosphatase (ACPP) and prostate stem cell antigen (PSCA) that could play a role in sperm physiology within the shell gland; (c) urea transporter (SLC14A2) that could provide a novel anti-microbial defence; (d) bactericidal/permeability-increasing protein-like 2 (BPIL2), and other potential anti-microbials that have not previously been documented in the chicken. These new hypotheses, if borne out experimentally, will lead to a greater understanding of shell gland function including the processes involved in eggshell formation and anti-microbial activity.