Oxidative Stability, Structure, and Physical Characteristics of Microcapsules Formed by Spray Drying of Fish Oil with Protein and Dextrin Wall Materials

Effects of cluster dextrin encapsulation on the properties and antioxidant stability of fractionated Riceberry protein hydrolysate powder prepared by bromelain

In this work, the biological properties of fractionated Riceberry bran protein hydrolysate obtained by ultrafiltration (URBPH) were evaluated and the possibility of using cluster dextrin to produce hydrolysate powder by spray-drying was investigated. Fractionation into peptides < 3 kDa was observed to improve antioxidant activity. URBPH < 3 kDa was then freeze-dried (FD-URBPH) and spray-dried (SD-URBPH) at different inlet air temperatures of 100-160 °C. The water solubility and antioxidant activity of FD-URBPH were higher than those of SD-URBPH. Nevertheless, encapsulation of hydrolysate with 10% cluster dextrin and an inlet temperature of 120 °C was also successful in maintaining protein qualities, which showed high 2,2'-azino-bis 3-ethylbenzthiazoline-6-sulfonic (ABTS•+) scavenging activity (89.14%) and water solubility index (92.49%) and low water activity (aw = 0.53). Moreover, encapsulation preserved the antioxidant activity of peptides during gastrointestinal digestion better than the free form. URBPH and its spray-dried microcapsules could be used as bioactive ingredients in functional drinks or foods.

Comparison of physicochemical properties and oxidative stability of microencapsulated perilla oil powder prepared by freeze-drying and spray-drying

Perilla oil is vulnerable to lipid oxidation owing to its high linolenic acid content. Microencapsulation using freeze- and spray-drying methods was applied to enhance the oxidative stability and change the physicochemical properties of perilla oil. Freeze-dried powder (FDP) possessed 11.77 to 38.48% oil content, whereas spray-dried powder (SDP) had 8.90-27.83% oil content. Encapsulation efficiency ranged from 51.22 to 85.71% by freeze-drying and from 77.38 to 90.74% by spray-drying. The oxidative stability of powders depends on the oil content and production methods. Generally, FDP had higher oxidative stability and water solubility, and lower moisture content and water activity than SDP. The particle size of FDP (154.00-192.00 μm) in volume-weight mean diameter was 2.56-24.49 times larger than that of SDP (7.84-72.03 μm). SDP had a lower volatile content at the initial time of storage than FDP, while more volatiles were observed in SDP as storage time increased. The microencapsulation method should be selected appropriately depending on the target property or usage in food applications.

Exploiting recent trends for the synthesis and surface functionalization of mesoporous silica nanoparticles towards biomedical applications

Rapid progress in developing multifunctional nanocarriers for drug delivery has been observed in recent years. Inorganic mesoporous silica nanocarriers (MSNs), emerged as an ideal candidate for gene/drug delivery with distinctive morphological features. These ordered carriers of porous nature have gained unique attention due to their distinctive features. Moreover, transformation can be made to these nanocarriers in terms of pores size, pores volume, and particle size by altering specific parameters during synthesis. These ordered porous materials have earned special attention as a drug carrier for treating multiple diseases. Herein, we highlight the strategies employed in synthesizing and functionalizing these versatile nanocarriers. In addition, the various factors that influence their sizes and morphological features were also discussed. The article also summarizes the recent advancements and strategies for drug and gene delivery by rendering smarter MSNs by incorporating functional groups on their surfaces. Averting off-target effects through various capping strategies is a massive milestone for the induction of stimuli-responsive nanocarriers that brings out a great revolution in the biomedical field.

•

MSNs serve as an ideal candidate for gene/drug delivery with unique and excellent attributes.

•

MSNs surface can be functionalized using specific materials to impart unique structural features.

•

Functionalization of MSNs with stimuli-responsive molecules can act as gatekeepers by responding to the desired stimulus after uncapping.

•

These capping agents act as vital targeting agents in developing MSNs being employed in various biomedical applications.

Impact of emulsifiers for the nanoencapsulation with maltodextrin of cannabis oil by spray drying on the physicochemical properties and bioaccessibility of cannabinoids

Our study aimed to investigate the impact of various emulsifiers, namely whey protein isolate (WPI), soy protein isolate (SPI), and Tween 80 (Tw), on their ability to encapsulate cannabis oil with maltodextrin as the wall material. The physicochemical properties of the powder, the stability of the cannabinoids, and their bioaccessibility during static in vitro digestion were examined. The average diameter of fat globules in liquid nanoemulsions was 170, 259, and 95 nm for WPI, SPI, and Tw, respectively. The encapsulation efficiency was high for protein emulsifiers (>95%) compared to Tw (∼16%). Upon powder reconstitution in water, the emulsified fat droplets remained stable for WPI (176 nm); however, higher fat globule size (diameters of 346 nm and 210 nm) was observed for SPI and Tw powders, respectively. All oil powders had high solubility (>97%). The peroxide value (PV) showed nearly a fourfold increase for the oil extracted from the powder than the initial PV of bulk oil (5.2 mEq). However, UPLC-TUV analysis of the main cannabinoids (CBD, THC, and CBN) indicated that there is no significant difference between the various formulations and the bulk oil, except for lower Tw. The in vitro digestion model results showed higher bioaccessibility of the cannabinoids for Tw (∼53%) than for proteins (WPI ∼ 7% and SPI ∼ 10%). These findings suggest that the emulsifiers used for spray drying nanoencapsulation of cannabis oil have an impact on the encapsulation efficiency and cannabinoid bioaccessibility, highlighting the importance of choosing adequate emulsifiying agents for their optimal oral delivery.

Effects of Wall Material on Medium-Chain Triglyceride (MCT) Oil Microcapsules Prepared by Spray Drying

A medium-chain triglyceride (MCT) oil microcapsule was prepared by spray drying. The effects of the wall-material parameters of wall-to-oil ratio (1:1 to 3:1) and type of wall material (gum arabic (GA), whey protein isolate (WPI), and octenyl succinic anhydride (OSA) starch) on the microcapsules were evaluated. The droplet size, size distribution, viscosity, zeta potential, and stability of the emulsions were measured. The spray-dried powder was characterized by its morphology, yield, encapsulation efficiency, and moisture content. The wall material influenced the characteristics of the emulsions and microcapsules. The formulation with a 2:1 wall-to-oil ratio and OSA starch/maltodextrin as the wall material resulted in a small droplet size (0.177 ± 0.002 µm) with high encapsulation efficiency (98.38 ± 0.01%). This formulation had good physical stability over three months under accelerated conditions. Thus, OSA starch/maltodextrin is an appropriate wall material for encapsulating MCT oil.

Microcapsules of Shrimp Oil Using Kidney Bean Protein Isolate and κ-Carrageenan as Wall Materials with the Aid of Ultrasonication or High-Pressure Microfluidization: Characteristics and Oxidative Stability

Emulsions containing shrimp oil (SO) at varying amounts were prepared in the presence of red kidney bean protein isolate (KBPI) and κ-carrageenan (KC) at a ratio of 1:0.1 (w/w). The emulsions were subjected to ultrasonication and high-pressure microfluidization to assist the encapsulation process. For each sample, ultrasonication was carried out for 15 min in continuous mode at 80% amplitude, whereas high-pressure microfluidization was operated at 7000 psi for 10 min. Ultrasonicated and microfluidized emulsions were finally spray-dried to prepare KBPI-KC-SO microcapsules. Moderate to high encapsulation efficiency (EE) ranging from 43.99 to 89.25% of SO in KPBI-KC-SO microcapsules was obtained and the microcapsules had good flowability. Particle size, PDI and zeta potential of KBPI-KC-SO microcapsules were 2.58–6.41 µm, 0.32–0.40 and −35.95–−58.77 mV, respectively. Scanning electron microscopic (SEM) images visually demonstrated that the wall material/SO ratio and the emulsification method (ultrasonication vs microfluidization) had an impact on the size, shape and surface of the KBPI-KC-SO microcapsules. Encapsulation of SO in microcapsules was validated empirically using Fourier transform infrared (FTIR) analysis. Encapsulation of SO in KBPI-KC microcapsules imparted superior protection against oxidative deterioration of SO as witnessed by the higher retention of polyunsaturated fatty acids (PUFAs) and astaxanthin when compared to unencapsulated SO during extended storage at room temperature.

Whole Wheat Crackers Fortified with Mixed Shrimp Oil and Tea Seed Oil Microcapsules Prepared from Mung Bean Protein Isolate and Sodium Alginate

Shrimp oil (SO) rich in n-3 fatty acids and astaxanthin, mixed with antioxidant-rich tea seed oil (TSO), was microencapsulated using mung bean protein isolate and sodium alginate and fortified into whole wheat crackers. SO and TSO mixed in equal proportions were emulsified in a solution containing mung bean protein isolate (MBPI) and sodium alginate (SA) at varied ratios. The emulsions were spray-dried to entrap SO-TSO in MBPI-SA microcapsules. MBPI-SA microcapsules loaded with SO-TSO showed low to moderately high encapsulation efficiencies (EE) of 32.26–72.09% and had a fair flowability index. Two selected microcapsules with high EE possessed the particle sizes of 1.592 and 1.796 µm with moderate PDI of 0.372 and 0.403, respectively. Zeta potential values were −54.81 mV and −53.41 mV. Scanning electron microscopic (SEM) images indicated that microcapsules were spherical in shape with some shrinkage on the surface and aggregation took place to some extent. Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) analyses of samples empirically validated the presence of SO-TSO in the microcapsules. Encapsulated SO-TSO showed superior oxidative stability and retention of polyunsaturated fatty acids (PUFAs) to unencapsulated counterparts during storage of 6 weeks. When SO-TSO microcapsules were fortified in whole wheat crackers at varying levels (0–10%), the crackers showed sensorial acceptability with no perceivable fishy odor. Thus, microencapsulation of SO-TSO using MBPI-SA as wall materials could be used as an alternative carrier system, in which microcapsules loaded with PUFAs could be fortified in a wide range of foods.

Preparation of Melamine/Rice Husk Powder Coated Shellac Microcapsules and Effect of Different Rice Husk Powder Content in Wall Material on Properties of Wood Waterborne Primer

The melamine/rice husk powder-coated shellac microcapsules were prepared by in-situ polymerization with melamine resin mixed with rice husk powder as microcapsule wall material and shellac as microcapsule core material. The effect of the addition amount of microcapsules with different wall material ratios on the performance of wood waterborne primer coating was investigated. The results show that the most important factor affecting the performance of microcapsules is the content of rice husk powder. Through the preparation and analysis of shellac microcapsule primer coating coated with melamine/rice husk powder, when the content of microcapsule powder is 0-6%, it has little effect on the optical properties of wood waterborne primer coating, and the microcapsule with 5.5% rice husk powder has little effect on the color difference of primer coating. The coating hardness increases with the increase of rice husk powder content in wall material. When the rice husk powder content in wall material is more than 5.5%, the coating hardness reaches the best. When the content of microcapsule powder is 3.0-9.0%, the adhesion of the coating is better, and the coating with rice husk powder content of 5.5% in microcapsule wall material has better impact resistance. When the content of rice husk powder was 5.5% and the content of microcapsule powder was 6%, the elongation at break of the primer coating was the highest and the tensile resistance was the best. The composition of wood waterborne primer did not change after adding microcapsule. The water-based primer with microcapsule has better aging resistance. The water-based primer coating with rice husk powder content of 5.5% and the addition amount of 6% had the best comprehensive performance, which lays the technical reference for the toughness and self-repairing of the waterborne wood coatings.

Fabrication and characterization of gum arabic- and maltodextrin-based microcapsules containing polyunsaturated oils

BACKGROUND

Polyunsaturated oils have various health-promoting effects, however, they are highly prone to oxidation. Encapsulation using biopolymers is one of the most effective strategies to enhance oil stability. This research examined the potential of gum arabic and maltodextrin for microencapsulation of omega-3 rich oils, aiming to enhance encapsulation efficiency and stability of encapsulated oil.

RESULTS

We encapsulated fish and flaxseed oils by emulsification-spray drying. Spray-dried microcapsules were prepared by oil-in-water emulsions consisting of 10 wt% oil and 30 wt% biopolymer (gum arabic, maltodextrin, or their mixture). Results showed that both microcapsules were spherical in shape with surface shrinkage, and exhibited amorphous structures. Gum arabic-based microcapsules had higher encapsulation efficiency as well as better storage stability for both types of oil. Flaxseed oil microcapsules generally had higher oxidative stability regardless of the type of wall material.

CONCLUSIONS

Through a comprehensive characterization of the physical and chemical properties of the emulsions and resulting microcapsules, we proved gum arabic to be a more effective wall material for polyunsaturated oil microencapsulation, especially flaxseed oil. This study provides a promising approach to stabilize oils which are susceptible to deterioration, and facilitates their wider uses as food and nutraceutical products. © 2021 Society of Chemical Industry.

Characterization of spray-dried Gac aril extract and estimated shelf life of β-carotene and lycopene

Background

Fresh Gac (Momordica cochinchinensis) fruit is rich in carotenoids, mainly β-carotene and lycopene, but these compounds are sensitive to degradation. Spray drying is used to encapsulate the sensitive β-carotene and lycopene with different materials. Only a few reports of using highly branched cyclodextrin (HBCD) have been published. Additionally, studies of β-carotene and lycopene losses in Gac powders during storage are limited. Therefore, the encapsulation of β-carotene and lycopene of Gac aril with HBCD by spray drying at different inlet temperatures were compared. The shelf life of β-carotene and lycopene during storage was also calculated.

Methods

The fresh Gac aril was separated and kept frozen before the experiment. Gac aril and water (1:5 w/v) were centrifuged at 8,000 g at 20 °C for 15 min using a high-speed centrifuge (Sorval; Dupont, Wilmington, DE, USA). The supernatant was filtered twice and concentrated until 15° Brix using a rotary evaporator (R-200; Buchi, Flawil, Switzerland). The mixture of concentrated aril extract and highly branched cyclodextrin at 5% (w/v) was dried at three inlet temperatures by a spray dryer (B-290; Buchi, Flawil, Switzerland) with drying air flow rate, compressor air pressure, and feed rate set at 473 L/h, 40 m³/h, and 3 mL/min, respectively . The physicochemical qualities, particle image morphology, and estimated storage time of β-carotene and lycopene were determined.

Results

Increased inlet temperatures of spray drying decreased the bulk density, β-carotene, and lycopene content of spray-dried powders significantly. The color values of dried powders had significant differences in yellowness (b*) and chroma, but not lightness (L*), redness (a*), and hue when the inlet temperature increased from 160 °C to 180 °C. The maximum reduction of β-carotene and lycopene observed during storage at 55 °C was 90.88% and 91.11% for 33 and 18 days. For β-carotene, the estimated shelf-life (retention of 50% of β-carotene) was 9.9, 48.4, and 91.6 days at 25 °C, 10 °C, and 4 °C. The shelf-life of lycopene was 26, 176, and 357 days at 25 °C, 10 °C, and 4 °C, respectively. HBCD could be potentially used as an encapsulating agent in spray-dried Gac aril, but the shelf-life of β-carotene and lycopene needs to be improved to be useful as a food ingredient.

Efficient encapsulation of fish oil: Capitalizing on the unique inherent characteristics of whey cream and hydrolyzed whey protein

The effects of protein concentration and of blending a phospholipid-rich whey coproduct, Procream (Salibra 700 Procream, Glanbia Nutritionals), with intact or hydrolyzed whey protein concentrate, on fish oil microencapsulation efficiency and oxidative stability were assessed. Trypsin and protease M, from Aspergillus oryzae, were used to produce 2 unique hydrolysates. All microcapsules had excellent encapsulation efficiencies (>92%) and good physical properties, regardless of protein content and Procream inclusion. Intact α-lactalbumin and β-lactoglobulin and their peptides were involved in stabilizing oil droplets. Disulfide interchange resulted in formation of protein aggregates, which were more pronounced in samples containing Procream. Although all microcapsules had relatively good oxidative stability, most had better stability at 2 versus 0.5% protein. Protease M hydrolysate + Procream microcapsules had the highest stability, regardless of protein content. Results demonstrated that Procream, at a reduced protein inclusion level, can partially replace more expensive whey protein ingredients in microencapsulation, when blended with a select hydrolysate.

The influence of nanodelivery systems on the antioxidant activity of natural bioactive compounds

Bioactive compounds may lose their antioxidant activity (e.g., phenolic compounds) at elevated temperatures, enhanced oxidative conditions and severe light exposures so they should be protected by various strategies such as nano/microencapsulation methods. Encapsulation technology has been employed as a proper method for using antioxidant ingredients and to provide easy dispersibility of antioxidants in all matrices including food and pharmaceutical products. It can improve the food fortification processes, release of antioxidant ingredients, and extending the shelf-life and bioavailability of them when ingested in the intestine. In this study, our main goal is to have an overview of the influence of nanoencapsulation on the bioactivity and bioavailability, and cellular activities of antioxidant ingredients in different delivery systems. Also, the effect of encapsulation process conditions, storage conditions, carrier wall materials, and release profile on the antioxidant activity of different natural bioactives are explained. Finally, analytical techniques for measuring antioxidant activity of nanoencapsulated ingredients will be covered.

Effect of maltodextrin combination with gum arabic and whey protein isolate on the microencapsulation of gurum seed oil using a spray-drying method

This study aimed to evaluate the potential of maltodextrin (MD) combination with gum arabic (GA), and whey protein isolate (WPI) on the microencapsulation of gurum seeds oil by a spray-drying method. Three formulations of protein-based (PB) (WPI: MD, 2:1), carbohydrate-based (CHOB) (GA: MD, 2:1), and mixed (MIX) (WPI: GA: MD, 1:1:1) wall materials were designed. The moisture content and water activity were in the range of 1.65-3.67% and 0.17-0.31, respectively, which is suitable for long-term storage. The best results were achieved when gurum seed oil was microencapsulated with carbohydrate-based, where it had the highest microencapsulation yield (92.80%) and microencapsulation efficiency (97.38%). Carbohydrate-based showed the highest relative crystallinity (32.25%) and the temperature of the glass transition (58.20 °C). FT-IR revealed that the oil was well encapsulated in the microcapsules. SEM of microcapsules showed spherical shapes without any apparent cracking on the surfaces. During the oxidative stability study, carbohydrate-based microencapsulation was the wall material that best protected the active materials against lipid oxidation.

A systematic review and meta-analysis of fish oil encapsulation within different micro/nanocarriers

Fish oil is one of the most important sources of omega 3 polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid and docosahexaenoic acid which are the most important PUFAs with several health benefits. However, PUFAs are prone to oxidation and have a poor water solubility which limits the use of fish oils into food formulations. Encapsulation techniques can be applied to overcome these challenges. There is a large number of published micro/nanoencapsulation papers, where each of them contains a limited number of wall materials, feed formulation, encapsulation technique, and storage conditions. Therefore, without systematic evaluation of the data extracted from available studies, the design of functional foods containing fish oil would not be very successful. The objective of this systematic review is a meta-analysis of published researches on the nano/microencapsulation of fish oil. A comprehensive literature search was performed between 1 October and 31 December 2019 with encapsulation, fish oil, and oxidative stability keywords. Overall, 39 qualified articles were selected for the statistical analysis. Based on the technique used for encapsulation, the fish oil-loaded carriers were classified into four main groups: (a) spray-dried particles; (b) freeze-dried particles; (c) electrospun fibers and electrosprayed capsules; and (d) other carriers prepared by supercritical antisolvent, gelation, liposomes, spray-freeze drying, and transglutaminase catalyzed cross-linking. The three most frequent methods applied for fish oil encapsulation were spray drying (42.86%), freeze drying (21.43%), and electrohydrodynamic (19.04%) methods, respectively. Averagely, the best encapsulation efficiency was obtained for electrohydrodynamic processes. Also, the combination of polysaccharide-protein based wall materials provided the best performance in terms of fish oil encapsulation efficiency.

Antioxidant and antibacterial activities of omega-3 rich oils/curcumin nanoemulsions loaded in chitosan and alginate-based microbeads

Omega-3 fatty acids can be considered as potential alternative therapeutic agents because of their antimicrobial and antioxidant properties. Two investigated omega-3 rich oils (flaxseed or fish) have been nanoemulsified with and without the natural antioxidant (curcumin, Cur) followed by their incorporation into crosslinked polymeric microbeads. The microbeads were developed from chitosan (CS), alginate (AL) and their combination (CSAL). Results indicated that the mean droplet diameter of the plain and Cur-loaded nanoemulsions ranged from 62.3 to 111.29 nm. The microbeads produced from AL, CS and their combination without Cur had predominantly shriveled surfaces compared to Cur-loaded ones. Addition of Cur was found to enhance oxidative stability, encapsulation efficiency, loading capacity, and antioxidant activity of the formulated microbeads. Plain fish oil revealed more antibacterial activity than plain flaxseed oil. Fish oil nanoemulsion-in-AL microbeads had more antibacterial activity than nanoemulsions of flaxseed oil-in-AL, fish oil-in-CS and the combined (CSAL) microbeads. However, flaxseed oil nanoemulsion-in-CS microbeads showed higher antibacterial activity than nanoemulsions of fish oil-in-CS, flaxseed oil-in-AL and the combined microbeads. The obtained results suggested the suitability of the formulated nanoemulsions-loaded microbeads to be used in food and pharmaceuticals products.

Optimisation of the microencapsulation of lavender oil by spray drying

Background: Lavender oil consists of around 100 components and is susceptible to volatilisation and degradation reactions. Aim: Microencapsulate lavender oil by spray drying using a biocompatible polymeric blend of gum acacia and maltodextrin to protect the oil components. Effect of total polymer content, oil loading, gum acacia, and maltodextrin proportions on the size, yield, loading, and encapsulation efficiency of the microparticles was investigated. Methods: Morphology and oil localisation within microparticles were assessed by confocal laser scanning electron microscope. Structural preservation and compatibility were assessed using Fourier transform infra-red spectroscopy, differential scanning calorimetry, and gas chromatography-mass spectrometry. Results: Lavender microparticles of size 12.42 ± 1.79 µm prepared at 30 w/w% polymer concentration, 16.67 w/w% oil loading, and 25w/w% gum acacia showed maximum oil protection at high loading (12 mg w/w%), and encapsulation efficiency (77.89 w/w%). Conclusion: Lavender oil was successfully microencapsulated into stable microparticles by spray drying using gum acacia/maltodextrin polymeric blend.

Investigating the Mechanism for the Enhanced Oxidation Stability of Microencapsulated Omega-3 Concentrates

Enzymatically concentrated anchovy oil (concentrate) is known to be much less stable than unconcentrated anchovy oil. However, we previously showed that concentrate surprisingly forms more stable microcapsules, when produced by complex coacervation, than does unconcentrated anchovy oil. Here we investigate the mechanism of this unexpected stability. We also investigate whether or not incorporation of concentrate can be used as an additive to improve the stability of unconcentrated anchovy oil microcapsules. Results showed that microcap stability increased as the amount of added concentrate increased. Decreased emulsion droplet size, lower positively charged zeta potential, and higher surface hydrophobicity were observed in the oil/water (O/W) emulsion, with the incorporation of concentrate in the oil phase, compared with the unconcentrated anchovy oil O/W emulsion. Both the decreased zeta potential and the increased hydrophobicity of concentrate in the mixed oil phase may improve droplet agglomeration, leading to enhanced oxidative stability of the concentrate-containing microcapsules. Decreased repulsive forces between droplets result in a more compact structure, thicker outer shell, and smoother surface, resulting in enhanced oxidation stability of the concentrate-containing microcapsules.

Controlled release of microencapsulated docosahexaenoic acid (DHA) by spray-drying processing

The omega-3-fatty acid, docosahexaenoic acid (DHA) 22:6 n-3, is an important food component for the visual and brain development of infants. In this study two approaches have been explored for the encapsulation of DHA in the pH dependant polymer hydroxyl-propyl-methyl-cellulose-acetate-succinate (HPMCAS). In the first approach Direct Spray Drying (DSD) was implemented for the microencapsulation of DHA/HPMCAS organic solutions, whilst in the second approach solid lipid nanoparticle (SLN) dispersions of DHA, were first produced by high-pressure homogenization, prior to being spray dried in HPMCAS aqueous solutions. The DSD approach resulted in significantly higher quantities of DHA being encapsulated, at 2.09 g/100 g compared to 0.60 g/100 g in the spray-dried SLNs. The DHA stability increased with the direct spray-drying approach. Release studies of DHA in the direct sprayed dried samples revealed a lag time for 2 h in acidic media followed by rapid release in phosphate buffer (pH 6.8).

Study of the Physicochemical Properties of Fish Oil Solid Lipid Nanoparticle in the Presence of Palmitic Acid and Quercetin

ω-3 polyunsaturated fatty acids, naturally found in fish oil, are highly desirable for their associated health benefits. However, they are highly prone to oxidation and degradation. We examined the feasibility of simultaneously adding a solid lipid (palmitic acid) and an antioxidant (quercetin) into a whey-protein-isolate-stabilized solid lipid nanoparticle emulsion for encapsulating fish oil. The goal was to find a rational and new formulation containing both solid lipid and antioxidant that can encapsulate fish oil and give it the best physicochemical stability. Our results show that adding palmitic acid improved the physical stability of the emulsions by decreasing the size of the oil-in-water droplets. On the basis of the thiobarbituric acid reactive substances assay, we found out that at low concentrations of palmitic acid the addition of quercetin played a dominant role in increasing the oxidation stability of fish oil. On the contrary, at high concentrations of palmitic acid, it was palmitic acid that dominated the oxidation inhibition by the solidification of the encapsulates' core.

Nanostructuring Biopolymers for Improved Food Quality and Safety

Food-grade biopolymers, apart from their inherent nutritional properties, can be tailored designed for improving food quality and safety, either serving as delivery vehicles for bioactive molecules, or as novel packaging components, not only improving the transport properties of biobased packaging structures, but also imparting active antibacterial and antiviral properties. In this chapter, the potential of different food-grade biopolymers (mainly proteins and carbohydrates but also some biopolyesters) to serve as encapsulating matrices for the protection of sensitive bioactives or as nanostructured packaging layers to improve transport properties and control the growth of pathogenic bacteria and viruses are described based on some developments carried out by the authors, as well as the most prominent works found in literature in this area.

Optimization of Rice Bran Oil Encapsulation Using Jackfruit Seed Starch – Whey Protein Isolate Blend as Wall Material and Its characterization

Response surface methodology (RSM) was used to optimize rice bran oil encapsulation using jackfruit seed starch – whey protein isolate blend as wall material by spray drying technique. Oil concentration (20, 25 and 30 %), wall material (Jackfruit seed starch & whey protein isolate) starch-protein ratio (1:1, 3:1 and 5:1) and spray drying inlet air temperature (140, 150 and 160 °C) were considered as process variables for optimization. A three-factor, three-level Box-Behnken design of RSM was used to conduct the experiments with the aim of maximizing encapsulation efficiency and minimizing peroxide value in the encapsulated powder. A polynomial regression model was fitted using design expert software, and the optimum conditions obtained were 20 % oil concentration, 3:1 starch-protein ratio and 140 °C spray drying inlet air temperature. The encapsulated rice bran oil powers obtained at optimized conditions offered 85.90 % of encapsulation efficiency and 1.18 meq/kg oil of peroxide value. The characterization study revealed that powder particles size (diameter) varied from 3.40 to 300.51 µm and most of the particles were smooth spheres with little appendages.

Novel nanoliposomal encapsulated omega-3 fatty acids and their applications in food

The aim of the present research was to evaluate the application, stability and suitability of ω3 polyunsaturated fatty acids (PUFAs) incorporated nanoliposomes in food enrichment. Nanoliposomal ω3 PUFAs was prepared by Mozafari method, and their application in bread and milk was compared with unencapsulated (fish oil) and microencapsulated ω3 PUFAs. Sensory evaluation was conducted to determine the perceptible sensory difference/similarity between control, unencapsulated, microencapsulated, and nanoliposomal ω3 PUFAs enriched foods. Results showed no significant (p=0.11) detectable difference between control and nanoliposomal ω3 PUFAs enriched samples while, samples enriched with unencapsulated or microencapsulated ω3 PUFAs showed significant (p=0.02) fishy flavor. Moreover, significantly (p<0.01) higher ω3 PUFAs % recovery and lower peroxide and anisidine values were observed in nanoliposomal ω3 PUFAs enriched samples in comparison with other samples. In conclusion, an effective and reproducible method for application of ω3 PUFAs in the food system was developed.