Thermodynamic properties of moisture desorption of raw pinhão (Araucaria angustifolia seeds)

New insights into moisture sorption characteristics, nutritional composition, and antioxidant and morphological properties of dried duckweed [Wolffia arrhiza (L.) Wimm]

BACKGROUND

Duckweed has been considered as an alternative future food material as a result of its high nutritional values, although it also has a high moisture content resulting in a short shelf life. Moisture sorption isotherms are used to design dehydration and storage conditions to prolong the shelf life food products. To date, information regarding the sorption isotherm of duckweed has not been reported. Scanning electron microscopy (SEM) is frequently used to study food microstructure. However, this technique has to be performed under high-vacuum conditions and takes a long time. In the present study, two-photon imaging microscopy was selected to investigate the microstructure of dried duckweed instead of SEM.

RESULTS

Among five sorption isotherm models, the Peleg model gave the highest goodness of fit. The monolayer moisture content (M₀ ) of duckweed was in the range 7.43-7.92% dry basis (d.b.) and 8.87-8.86% d.b. for the GAB and BET multilayer kinetic models, respectively. The moisture changing behavior at each relative humidity step could be described by two exponential and reaction order kinetics. A clear cell structure (hexagonal shape) and stomata, as well as structural images (both 2D and 3D), were obtained using the two-photon microscopy technique.

CONCLUSION

The Peleg model best described the moisture sorption behaviors of dried duckweed and the shape of sorption isotherms were classified as type III isotherm. The M₀ of dried duckweed ranged from 7.43 to 8.86% d.b. Two-photon microscopy was a potent tool for investigating the microstructure and composition of dried duckweed. © 2021 Society of Chemical Industry.

Thermodynamic criteria analysis for the use of taro starch spherical aggregates as microencapsulant matrix

Spherical aggregates can be obtained from taro starch by spray-drying without using bonding agents. Accurate information about thermal issues of spherical aggregates can provide valuable information for assessing the application as encapsulant. Spherical aggregates of taro starch were obtained by spray-drying and analyzed using dynamic vapour sorption. The use of the Guggenheim, Anderson and de Boer (GAB) model indicated a Type II isotherm pattern with weaker interactions in the multilayer region. Differential enthalpy and entropy estimates reflected a mesoporous microstructure, implying that energetic mechanisms dominate over transport mechanisms in the sorption process. The limitation by energetic mechanisms was corroborated with enthalpy-entropy compensation estimates. The diffusivity coefficient was of the order of 10^-8 m²·s^-1, which is in line with results obtained for common materials used for encapsulation purposes. The thermodynamic properties and the lack of a bonding agent indicated the viability of spherical aggregates of taro starch for encapsulation of biocompounds.

Moisture Sorption Isotherms, Isosteric Heat of Sorption and Glass Transition Temperature of Murtilla (Ugni molinae T.) Berry

Adsorption and desorption isotherms of fresh and dried murtilla (Ugni molinae Turcz) berries were determined at 20, 40 and 60°C using a gravimetric technique. The experimental data obtained were fitted to eight models, namely GAB, BET, Henderson, Caurie, Smith, Oswin, Halsey and Iglesias–Chirife. A non-linear least square regression analysis was used to evaluate the models. The GAB model best fitted the experimental data. Isosteric heat of sorption was determined from the equilibrium sorption data using the Clausius–Clapeyron equation and was found to decrease exponentially with increasing moisture content. The enthalpy–entropy compensation theory applied to the sorption isotherms indicated an enthalpy controlled sorption process. Glass transition temperature of murtilla was determined by differential scanning calorimetry and modelled as a function of moisture content by the Gordon–Taylor equation and as function of water activity by Roos and Khalloufi models, which proved to be excellent tools for predicting glass transition of murtilla.

Analysis of moisture desorption isotherms of eggplant (Solanum melongena)

Sorption isotherms of eggplant were determined employing, as experimental technique, a static gravimetric method, using saturated salt solutions to achieve the equilibrium. The experiments were carried out at different temperatures (20, 35, 50 and 65 °C). The sorption isotherms can be classified, according to Brunauer's classification, as type II or III depending on temperature. Equilibrium moisture content data were correlated by two models usually applied to foodstuffs (Brunauer--Emmet--Teller (BET) and Halsey). BET model was employed to determine monolayer moisture content (0.121 kg/kg d.b.). Halsey model was selected by the goodness of fitting. Experimental data were analyzed by a thermodynamic approach to obtain some properties as net isosteric heat, equilibrium heat and differential and net integral entropy. The differential enthalpy and entropy decreased with increasing moisture content and satisfied the compensation theory. The net integral enthalpy and entropy showed maximum values (≈31 kJ/mol and ≈88 J/mol.K) at 0.093 (kg/kg d.b.) of moisture content.