Selection and characterization of spontaneous phage-resistant mutant of Limosilactobacillus fermentum

Phage infection remains a major cause of fermentation failures in the dairy industry. The development of phage-resistant mutants of important fermentation strains is an effective measure used to address phage-related issues. This study employed the secondary culture method to screen for spontaneous phage-resistant mutants from the phage sensitive strain Limosilactobacillus fermentum IMAU32646 (L. fermentum IMAU32646). The phenotypic characteristics, technological attributes, probiotic characterization, adsorption characteristics and mutant genes were investigated. The results showed that the mutant strain displayed a high degree of phage-resistance and stability. The mutant strain produced more lactic acid during fermentation than the sensitive strain, while maintaining identical cell structure and morphologies. The mutant strain exhibited superior tolerance to acid and bile salts compared to the sensitive strain. Furthermore, the adsorption rate of phage LFP01 on the mutant strain was significantly lower than that of the sensitive strain. Following genome re-sequencing analysis showed that adsorption interference and blocked DNA injection were responsible for its phage-resistance. These results may provide a new strategy for avoiding phage contamination and industrial application of phage-resistant strains with good characteristics.

Spontaneous Phage Resistance in Avian Pathogenic Escherichia coli

Avian pathogenic Escherichia coli (APEC) is one of the most important bacterial pathogens affecting poultry worldwide. The emergence of multidrug-resistant pathogens has renewed the interest in the therapeutic use of bacteriophages (phages). However, a major concern for the successful implementation of phage therapy is the emergence of phage-resistant mutants. The understanding of the phage-host interactions, as well as underlying mechanisms of resistance, have shown to be essential for the development of a successful phage therapy. Here, we demonstrate that the strictly lytic Escherichia phage vB_EcoM-P10 rapidly selected for resistance in the APEC ST95 O1 strain AM621. Whole-genome sequence analysis of 109 spontaneous phage-resistant mutant strains revealed 41 mutants with single-nucleotide polymorphisms (SNPs) in their core genome. In 32 of these, a single SNP was detected while two SNPs were identified in a total of nine strains. In total, 34 unique SNPs were detected. In 42 strains, including 18 strains with SNP(s), gene losses spanning 17 different genes were detected. Affected by genetic changes were genes known to be involved in phage resistance (outer membrane protein A, lipopolysaccharide-, O- antigen-, or cell wall-related genes) as well as genes not previously linked to phage resistance, including two hypothetical genes. In several strains, we did not detect any genetic changes. Infecting phages were not able to overcome the phage resistance in host strains. However, interestingly the initial infection was shown to have a great fitness cost for several mutant strains, with up to ∼65% decrease in overall growth. In conclusion, this study provides valuable insights into the phage-host interaction and phage resistance in APEC. Although acquired resistance to phages is frequently observed in pathogenic E. coli, it may be associated with loss of fitness, which could be exploited in phage therapy.

Bacteriophages in dairy plants

Bacteriophages represent the main microbiological threat for the manufacture of fermented foods. The dairy industry is the most affected by this problem, as phages are naturally present in raw milk, surfaces, vats, tanks, floors, and distributed by air displacements. Cheese whey may also contain high phage concentrations. Prophages harbored by lysogenic strains could be induced, generating new lytic phages. In this context, where phages cannot be eradicated from dairies, methods of phage monitoring are mandatory. These are mainly based in microbiological features, like classical methods, that are the most used, economic and simple to carry out. Phage DNA detection and quantification by PCR and qPCR, more complex and expensive, are faster, although not able to discern between viable and non-viable virions. Electron microscopy allows direct visualization and characterization of phage morphology, but the apparatus is expensive. Alternative methods based in other phage traits also exist, though less studied and not applicable on a daily basis. Recognition of contamination sources and correct phage monitoring in dairy factories allow a correct application of control measures. These include general measures such as proper factory design, efficient programs of sanitization, good treatment of raw materials, especially milk, and careful handling of by-products. Additionally, the use of starts cultures should be adequate, with application of rotation schemes when possible. Finally, the selection of bacteriophage insensitive mutants (BIM) is essential, and can be achieved simply and empirically, though the study of CRISPR-Cas and other newly discovered mechanisms provide a more rational basis to obtain BIMs with optimized features.

The enemy from within: a prophage of Roseburia intestinalis systematically turns lytic in the mouse gut, driving bacterial adaptation by CRISPR spacer acquisition

Despite an overall temporal stability in time of the human gut microbiota at the phylum level, strong variations in species abundance have been observed. We are far from a clear understanding of what promotes or disrupts the stability of microbiome communities. Environmental factors, like food or antibiotic use, modify the gut microbiota composition, but their overall impacts remain relatively low. Phages, the viruses that infect bacteria, might constitute important factors explaining temporal variations in species abundance. Gut bacteria harbour numerous prophages, or dormant viruses, which can evolve to become ultravirulent phage mutants, potentially leading to important bacterial death. Whether such phenomenon occurs in the mammal's microbiota has been largely unexplored. Here we studied temperate phage-bacteria coevolution in gnotoxenic mice colonised with Roseburia intestinalis, a dominant symbiont of the human gut microbiota, and Escherichia coli, a sub-dominant member of the same microbiota. We show that R. intestinalis L1-82 harbours two active prophages, Jekyll and Shimadzu. We observed the systematic evolution in mice of ultravirulent Shimadzu phage mutants, which led to a collapse of R. intestinalis population. In a second step, phage infection drove the fast counter-evolution of host phage resistance mainly through phage-derived spacer acquisition in a clustered regularly interspaced short palindromic repeats array. Alternatively, phage resistance was conferred by a prophage originating from an ultravirulent phage with a restored ability to lysogenize. Our results demonstrate that prophages are a potential source of ultravirulent phages that can successfully infect most of the susceptible bacteria. This suggests that prophages can play important roles in the short-term temporal variations observed in the composition of the gut microbiota.

Bacteriophages on dairy foods

This review focuses on the impact of bacteriophages on the manufacture of dairy foods. Firstly, the impact of phages of lactic acid bacteria in the dairy industry, where they are considered enemies, is discussed. The sources of phage contamination in dairy plants are detailed, with special emphasis on the rise of phage infections related to the growing use of cheese whey as ingredient. Other topics include traditional and new methods of phage detection, quantification and monitoring, and strategies of phage control in dairy plants, either of physical, chemical or biological nature. Finally, the use of phages or purified phage enzymes as allies to control pathogenic bacteria in the food industry is reviewed.

Phenotypic, fermentation characterization, and resistance mechanism analysis of bacteriophage-resistant mutants of Lactobacillus delbrueckii ssp. bulgaricus isolated from traditional Chinese dairy products

Bacteriophage infection is a large factor in dairy industrial production failure on the basis of pure inoculation fermentation, and developing good commercial starter cultures from wild dairy products and improving the environmental vigor of starter cultures by enhancing their phage resistance are still the most effective solutions. Here we used a spontaneous isolation method to obtain bacteriophage-resistant mutants of Lactobacillus delbrueckii ssp. bulgaricus strains that are used in traditional Chinese fermented dairy products. We analyzed their phenotypes, fermentation characteristics, and resistance mechanisms. The results showed that bacteriophage-insensitive mutants (BIM) BIM8 and BIM12 had high bacteriophage resistance while exhibiting fermentation and coagulation attributes that were as satisfying as those of their respective parent strains KLDS1.1016 and KLDS1.1028. According to the attachment receptor detection, mutants BIM8 and BIM12 exhibited reduced absorption to bacteriophage phiLdb compared with their respective bacteriophage-sensitive parent strains because of changes to the polysaccharides or teichoic acids connected to their peptidoglycan layer. Additionally, genes, including HSDR, HSDM, and HSDS, encoding 3 subunits of a type I restriction-modification system were identified in their respective parent strains. We also discovered that HSDR and HSDM were highly conserved but that HSDS was variable because it is responsible for the DNA specificity of the complex. The late lysis that occurred only in strain KLDS1.1016 and not in strain KLDS1.1028 suggests that the former and its mutant BIM8 also may have an activatable restriction-modification mechanism. We conclude that the L. bulgaricus BIM8 and BIM12 mutants have great potential in the dairy industry as starter cultures, and their phage-resistance mechanism was effective mainly due to the adsorption interference and restriction-modification system.

Melting curve analysis of a groEL PCR fragment for the rapid genotyping of strains belonging to the Lactobacillus casei group of species

Lactobacillus casei group (Lcs) consists of three phylogenetically closely related species (L. casei, L. paracasei, and L. rhamnosus), which are widely used in the dairy and probiotic industrial sectors. Strategies to easily and rapidly characterize Lcs are therefore of interest. To this aim, we developed a method according to a technique known as high resolution melting analysis (HRMa), which was applied to a 150 bp groEL gene fragment. The analysis was performed on 53 Lcs strains and 29 strains representatives of species that are commonly present in dairy and probiotic products and can be most probably co-isolated with Lcs strains. DNA amplification was obtained only from Lcs strains, demonstrating the specificity of the groEL primers designed in this study. The HRMa clustered Lcs strains in three groups that exactly corresponded to the species of the L. casei group. A following HRMa separated the 39 L. paracasei strains in two well distinct intraspecific groups, indicating the possible existence of at least two distinct genotypes inside the species. Nonetheless, the phenotypic characterization demonstrated that the genotypes do not correspond to the two L. paracasei subspecies, namely paracasei and tolerans. In conclusion, the melting curve analysis developed in this study is demonstrably a simple, labor-saving, and rapid strategy obtain the genotyping of a bacterial isolate and simultaneously potentially confirm its affiliation to the L. casei group of species. The application of this method to a larger collection of strains may validate the possibility to use the proposed HRMa protocol for the taxonomic discrimination of L. casei group of species. In general, this study suggests that HRMa can be a suitable technique for the genetic typization of Lactobacillus strains.

Bacteriophages and dairy fermentations

This review highlights the main strategies available to control phage infection during large-scale milk fermentation by lactic acid bacteria. The topics that are emphasized include the factors influencing bacterial activities, the sources of phage contamination, the methods available to detect and quantify phages, as well as practical solutions to limit phage dispersion through an adapted factory design, the control of air flow, the use of adequate sanitizers, the restricted used of recycled products, and the selection and growth of bacterial cultures.

Bacteriophage-insensitive mutants for high quality Crescenza manufacture

Streptococcus thermophilus is a thermophilic lactic acid bacterium used as starter culture for the manufacture of fermented dairy products. For the production of Crescenza and other soft cheeses, Sacco has developed and provides dairies with three different defined blends of S. thermophilus strains. Each blend contains two different S. thermophilus strains. The strains were selected based on their unique technological properties as well as different phage profiles. Analysis of 133 whey samples collected in 2009–2010 from Italian dairies showed a high prevalence (about 50%) of bacteriophage attacks on the blend ST020. More specifically, the strain S. thermophilus ST1A was found to be the preferred target of the bacteriophages. A bacteriophage insensitive mutant (BIM5) of the phage-sensitive strain ST1A was successfully developed and used to substitute strain ST1A in the Crescenza starter culture ST020. The strain BIM5 showed identical technological and industrial traits as those of the phage-sensitive strain ST1A. The improved resistance of the modified Crescenza starter culture ST020R was confirmed at Italian dairies, and its effectiveness monitored on 122 whey samples collected in 2011–2012. Compared to the previous values (2009–2010), the use of the phage-hardened blend ST020R allowed reducing of frequency of phage attacks from about 50 to less than 5% of the whey samples investigated.

Phages of lactic acid bacteria: the role of genetics in understanding phage-host interactions and their co-evolutionary processes

Dairy fermentations are among the oldest food processing applications, aimed at preservation and shelf-life extension through the use of lactic acid bacteria (LAB) starter cultures, in particular strains of Lactococcus lactis, Streptococcus thermophilus, Lactobacillus spp. and Leuconostoc spp. Traditionally this was performed by continuous passaging of undefined cultures from a finished fermentation to initiate the next fermentation. More recently, consumer demands on consistent and desired flavours and textures of dairy products have led to a more defined approach to such processes. Dairy (starter) companies have responded to the need to define the nature and complexity of the starter culture mixes, and dairy fermentations are now frequently based on defined starter cultures of low complexity, where each starter component imparts specific technological properties that are desirable to the product. Both mixed and defined starter culture approaches create the perfect environment for the proliferation of (bacterio)phages capable of infecting these LAB. The repeated use of the same starter cultures in a single plant, coupled to the drive towards higher and consistent production levels, increases the risk and negative impact of phage infection. In this review we will discuss recent advances in tracking the adaptation of phages to the dairy industry, the advances in understanding LAB phage-host interactions, including evolutionary and genomic aspects.