NanoSIMS imaging of Bacillus spores sectioned by focused ion beam

Cryo-FIB for TEM investigation of soft matter and beam sensitive energy materials

Primarily driven by structural biology, the rapid advances in cryogenic electron microscopy techniques are now being adopted and applied by materials scientists. Samples that inherently have electron transparency can be rapidly frozen (vitrified) in amorphous ice and imaged directly on a cryogenic transmission electron microscopy (cryo-TEM), however this is not the case for many important materials systems, which can consist of layered structures, embedded architectures, or be contained within a device. Cryogenic focused ion beam (cryo-FIB) lift-out procedures have recently been developed to extract intact regions and interfaces of interest, that can then be thinned to electron transparency and transferred to the cryo-TEM for characterization. Several detailed studies have been reported demonstrating the cryo-FIB lift-out procedure, however due to its relative infancy in materials science improvements are still required to ensure the technique becomes more accessible and routinely successful. Here, we review recent results on the preparation of cryo-TEM lamellae using cryo-FIB and show that the technique is broadly applicable to a range of soft matter and beam sensitive energy materials. We then present a tutorial that can guide the materials scientist through the cryo-FIB lift-out process, highlighting recent methodological advances that address the most common failure points of the technique, such as needle attachment, lift-out and transfer, and final thinning.

Mass Spectrometry Imaging

Mass spectrometry imaging (MSI) is a technique for obtaining information on the distribution of various molecules by performing mass spectrometry directly on the sample surface. The applications range from small molecules such as lipids to large molecules such as proteins. It is also possible to detect pharmaceuticals and elemental isotopes in interstellar matter. This review will introduce various applications of MSI with examples.

NanoSIP: NanoSIMS Applications for Microbial Biology

High-resolution imaging with secondary ion mass spectrometry (nanoSIMS) has become a standard method in systems biology and environmental biogeochemistry and is broadly used to decipher ecophysiological traits of environmental microorganisms, metabolic processes in plant and animal tissues, and cross-kingdom symbioses. When combined with stable isotope-labeling-an approach we refer to as nanoSIP-nanoSIMS imaging offers a distinctive means to quantify net assimilation rates and stoichiometry of individual cell-sized particles in both low- and high-complexity environments. While the majority of nanoSIP studies in environmental and microbial biology have focused on nitrogen and carbon metabolism (using ¹⁵N and ¹³C tracers), multiple advances have pushed the capabilities of this approach in the past decade. The development of a high-brightness oxygen ion source has enabled high-resolution metal analyses that are easier to perform, allowing quantification of metal distribution in cells and environmental particles. New preparation methods, tools for automated data extraction from large data sets, and analytical approaches that push the limits of sensitivity and spatial resolution have allowed for more robust characterization of populations ranging from marine archaea to fungi and viruses. NanoSIMS studies continue to be enhanced by correlation with orthogonal imaging and 'omics approaches; when linked to molecular visualization methods, such as in situ hybridization and antibody labeling, these techniques enable in situ function to be linked to microbial identity and gene expression. Here we present an updated description of the primary materials, methods, and calculations used for nanoSIP, with an emphasis on recent advances in nanoSIMS applications, key methodological steps, and potential pitfalls.

Fluoride movement into and out of Bacillus spores and growing cells and effects of fluoride accumulation on spore properties

AIMS

To investigate effects of fluoride ion (F^- ) on, and kinetics of its movement into and out of, spores and growing cells of Bacillus species.

METHODS AND RESULTS

Effects of F^- on Bacillus cell growth, spore germination and outgrowth and heat resistance were investigated, as well as F^- movement into and out of spores using ¹⁹ F-NMR. F^- inhibited Bacillus subtilis spore germination and outgrowth, and YhdU, now named FluC, was crucial to prevent F^- accumulation in growing cells and to minimize F^- inhibition of spore germination. Dormant wild-type, yhdU and coat defective B. subtilis spores, and Bacillus cereus spores incubated in 40 mmol l^-1 NaF for 48 h accumulated 2-2·6 mol l^-1  F^- and its movement into Bacillus spores was highest at low pH. Bacillus subtilis spores lacking Ca-dipicolinic acid accumulated higher F^- levels than wild-type spores.

CONCLUSIONS

These results are consistent with F^- incorporation into the dormant spore core, and as HF and/or NaF, but not CaF₂ . YhdU played no significant role in F^- uptake or efflux in dormant spores, but assisted in F^- export early in spore germination.

SIGNIFICANCE AND IMPACT OF STUDY

This knowledge provides new insight into effects of F^- on Bacillus cells and spores and how this anion moves into, and out of spores.

Correlated SEM, FIB-SEM, TEM, and NanoSIMS imaging of microbes from the hindgut of a lower termite: methods for in situ functional and ecological studies of uncultivable microbes

The hindguts of lower termites harbor highly diverse, endemic communities of symbiotic protists, bacteria, and archaea essential to the termite's ability to digest wood. Despite over a century of experimental studies, ecological roles of many of these microbes are unknown, partly because almost none can be cultivated. Many of the protists associate with bacterial symbionts, but hypotheses for their respective roles in nutrient exchange are based on genomes of only two such bacteria. To show how the ecological roles of protists and nutrient transfer with symbiotic bacteria can be elucidated by direct imaging, we combined stable isotope labeling (13C-cellulose) of live termites with analysis of fixed hindgut microbes using correlated scanning electron microscopy, focused ion beam-scanning electron microscopy (FIB-SEM), transmission electron microscopy, and high resolution imaging mass spectrometry (NanoSIMS). We developed methods to prepare whole labeled cells on solid substrates, whole labeled cells milled with a FIB-SEM instrument to reveal cell interiors, and ultramicrotome sections of labeled cells for NanoSIMS imaging of 13C enrichment in protists and associated bacteria. Our results show these methods have the potential to provide direct evidence for nutrient flow and suggest the oxymonad protist Oxymonas dimorpha phagocytoses and enzymatically degrades ingested wood fragments, and may transfer carbon derived from this to its surface bacterial symbionts.

Plutonium transport in the environment

The recent estimated global stockpile of separated plutonium (Pu) worldwide is about 500 t, with equal contributions from nuclear weapons and civilian nuclear energy. Independent of the United States' future nuclear energy policy, the current large and increasing stockpile of Pu needs to be safely isolated from the biosphere and stored for thousands of years. Recent laboratory and field studies have demonstrated the ability of colloids (1-1000 nm particles) to facilitate the migration of strongly sorbing contaminants such as Pu. In understanding the dominant processes that may facilitate the transport of Pu, the initial source chemistry and groundwater chemistry are important factors, as no one process can explain all the different field observations of Pu transport. Very little is known about the molecular-scale geochemical and biochemical mechanisms controlling Pu transport, leaving our conceptual model incomplete. Equally uncertain are the conditions that inhibit the cycling and mobility of Pu in the subsurface. Without a better mechanistic understanding for Pu at the molecular level, we cannot advance our ability to model its transport behavior and achieve confidence in predicting long-term transport. Without a conceptual model that can successfully predict long-term Pu behavior and ultimately isolation from the biosphere, the public will remain skeptical that nuclear energy is a viable and an attractive alternative to counter global warming effects of carbon-based energy alternatives. This review summarizes our current understanding of the relevant conditions and processes controlling the behavior of Pu in the environment, gaps in our scientific knowledge, and future research needs.

Technologies for detecting metals in single cells

In order to fully understand the metallomics of an organism, it is essential to know how much metal is present in each cell and, ideally, to know both the spatial and chemical distributions of each metal (i.e., where within the cell is a metal found, and in what chemical form). No single technique provides all of this information. This chapter reviews the various methods that can be used and the strengths and weaknesses of each.

Mass spectrometry imaging and profiling of single cells

Mass spectrometry imaging and profiling of individual cells and subcellular structures provide unique analytical capabilities for biological and biomedical research, including determination of the biochemical heterogeneity of cellular populations and intracellular localization of pharmaceuticals. Two mass spectrometry technologies-secondary ion mass spectrometry (SIMS) and matrix assisted laser desorption/ionization mass spectrometry (MALDI MS)-are most often used in micro-bioanalytical investigations. Recent advances in ion probe technologies have increased the dynamic range and sensitivity of analyte detection by SIMS, allowing two- and three-dimensional localization of analytes in a variety of cells. SIMS operating in the mass spectrometry imaging (MSI) mode can routinely reach spatial resolutions at the submicron level; therefore, it is frequently used in studies of the chemical composition of subcellular structures. MALDI MS offers a large mass range and high sensitivity of analyte detection. It has been successfully applied in a variety of single-cell and organelle profiling studies. Innovative instrumentation such as scanning microprobe MALDI and mass microscope spectrometers enables new subcellular MSI measurements. Other approaches for MS-based chemical imaging and profiling include those based on near-field laser ablation and inductively-coupled plasma MS analysis, which offer complementary capabilities for subcellular chemical imaging and profiling.

NanoSIP: NanoSIMS applications for microbial biology

Recent advances in high-resolution imaging secondary ion mass spectrometry (SIMS) (J Biol 5: 20, 2006) have made isotopic tracing at the single-cell level a standard technique for microbial ecology and systems biology; elemental and metal cofactor analyses are also showing significant promise. For example, with the NanoSIMS, metabolic activities of single microbial cells can be tracked by imaging natural isotopic/elemental composition or isotope distribution after stable isotope probing. When linked to molecular visualization methods, such as in situ hybridization and antibody labeling, these techniques enable in situ function to be linked to microbial identity and gene expression. We broadly call this combination of methods nanoSIP, for nanometer-scale stable isotope probing. Here we present the primary materials and methods used for nanoSIP, with an emphasis on key steps and potential pitfalls. Applications to pure cultures, cocultures, and complex communities are discussed.

Compositional mapping of the surface and interior of mammalian cells at submicrometer resolution

We present progress toward imaging of chemical species within intact mammalian cells using secondary ion mass spectrometry, including the simultaneous mapping of subcellular elemental and molecular species along with intrinsic membrane-specific cellular markers. Results from imaging both the cell surface and cell interior exposed by site-specific focused ion beam milling demonstrate that in-plane resolutions of approximately 400-500 nm can be achieved. The results from mapping cell surface phosphatidylcholine and several other molecular ions present in the cells establish that spatially resolved chemical signatures of individual cells can be derived from novel multivariate analysis and classification of the molecular images obtained at different m/z ratios. The methods we present here for specimen preparation and chemical imaging of cell interiors provide the foundation for obtaining 3D molecular maps of unstained mammalian cells, with particular relevance for probing the subcellular distributions of small molecules, such as drugs and metabolites.

Identification of diazotrophic microorganisms in marine sediment via fluorescence in situ hybridization coupled to nanoscale secondary ion mass spectrometry (FISH-NanoSIMS)

Growing appreciation for the biogeochemical significance of uncultured microorganisms is changing the focus of environmental microbiology. Techniques designed to investigate microbial metabolism in situ are increasingly popular, from mRNA-targeted fluorescence in situ hybridization (FISH) to the "-omics" revolution, including metagenomics, transcriptomics, and proteomics. Recently, the coupling of FISH with nanometer-scale secondary ion mass spectrometry (NanoSIMS) has taken this movement in a new direction, allowing single-cell metabolic analysis of uncultured microbial phylogenic groups. The main advantage of FISH-NanoSIMS over previous noncultivation-based techniques to probe metabolism is its ability to directly link 16S rRNA phylogenetic identity to metabolic function. In the following chapter, we describe the procedures necessary to identify nitrogen-fixing microbes within marine sediment via FISH-NanoSIMS, using our work on nitrogen fixation by uncultured deep-sea methane-consuming archaea as a case study.