Formation of magnesium-phosphoenzyme and magnesium-calcium-phosphoenzyme in the phosphorylation of adenosine triphosphatase by orthophosphate in sarcoplasmic reticulum. Models of a reaction sequence

What the structure of a calcium pump tells us about its mechanism

The report of the crystal structure of the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum in its Ca(2+)-bound form [Toyoshima, Nakasako and Ogawa (2000) Nature (London) 405, 647-655] provides an opportunity to interpret much kinetic and mutagenic data on the ATPase in structural terms. There are no large channels leading from the cytoplasmic surface to the pair of high-affinity Ca(2+) binding sites within the transmembrane region. One possible access pathway involves the charged residues in transmembrane alpha-helix M1, with a Ca(2+) ion passing through the first site to reach the second site. The Ca(2+)-ATPase also contains a pair of binding sites for Ca(2+) that are exposed to the lumen. In the four-site model for transport, phosphorylation of the ATPase leads to transfer of the two bound Ca(2+) ions from the cytoplasmic to the lumenal pair of sites. In the alternating four-site model for transport, phosphorylation leads to release of the bound Ca(2+) ions directly from the cytoplasmic pair of sites, linked to closure of the pair of lumenal binding sites. The lumenal pair of sites could involve a cluster of conserved acidic residues in the loop between M1 and M2. Since there is no obvious pathway from the high-affinity sites to the lumenal surface of the membrane, transport of Ca(2+) ions must involve a significant change in the packing of the transmembrane alpha-helices. The link between the phosphorylation domain and the pair of high-affinity Ca(2+) binding sites is probably provided by two small helices, P1 and P2, in the phosphorylation domain, which contact the loop between transmembrane alpha-helices M6 and M7.

The importance of carboxyl groups on the lumenal side of the membrane for the function of the Ca(2+)-ATPase of sarcoplasmic reticulum

The conventional model for transport of Ca(2+) by the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum (SR) involves a pair of binding sites for Ca(2+) that change upon phosphorylation of the ATPase from being high affinity and exposed to the cytoplasm to being low affinity and exposed to the lumen. However, a number of recent experiments suggest that in fact transport involves two separate pairs of binding sites for Ca(2+), one pair exposed to the cytoplasmic side and the other pair exposed to the lumenal side. Here we show that the carbodiimide 1-ethyl-3-[3-(dimethylamino)-propyl] carbodiimide (EDC) is membrane-impermeable, and we use EDC to distinguish between cytoplasmic and lumenal sites of reaction. Modification of the Ca(2+)-ATPase in sealed SR vesicles with EDC leads to loss of ATPase activity without modification of the pair of high affinity Ca(2+)-binding sites. Modification of the purified ATPase in unsealed membrane fragments was faster than modification in SR vesicles, suggesting the presence of more quickly reacting lumenal sites. This was confirmed in experiments measuring EDC modification of the ATPase reconstituted randomly into sealed lipid vesicles. Modification of sites on the lumenal face of the ATPase led to loss of the Ca(2+)-induced increase in phosphorylation by P(i). It is concluded that carboxyl groups on the lumenal side of the ATPase are involved in Ca(2+) binding to the lumenal side of the ATPase and that modification of these sites leads to loss of ATPase activity. The presence of MgATP or MgADP leads to faster inhibition of the ATPase by EDC in unsealed membrane fragments than in sealed vesicles, suggesting that binding of MgATP or MgADP to the ATPase leads to a conformational change on the lumenal side of the membrane.

Effects of pH on phosphorylation of the Ca2+-ATPase of sarcoplasmic reticulum by inorganic phosphate

The fluorescence intensity of the Ca2+-ATPase of skeletal muscle sarcoplasmic reticulum (SR) labelled with 4-(bromomethyl)-6,7-dimethoxycoumarin has been shown to decrease on phosphorylation of the ATPase with P(i), this providing a convenient measure of the level of phosphorylation. Comparison of the fluorescence decrease observed with ATP and with high concentrations of P(i) fix the value of the equilibrium constant for the phosphorylation reaction E2PMg<==>E2P(i)Mg at pH 6.0 at about 2. Studies of the pH-dependence of phosphorylation show that H2PO4- and HPO4(2)- bind to the ATPase with equal affinity, but that only binding of H2PO4- leads to phosphorylation, described by an equilibrium constant of 2.3. Luminal Ca2+ can bind to a pair of sites on the ATPase, with affinities of 1.3 x 10(3) and 1.7 x 10(3) M(-1) for the unphosphorylated and phosphorylated forms of the ATPase respectively, with stronger binding of Ca2+ to the phosphorylated form resulting in an increase in the effective equilibrium constant for phosphorylation.

Coexistence of high- and low-affinity Ca2+ binding sites of the sarcoplasmic reticulum calcium pump

We have recently shown [Mészáros, L. G., & Bak, J. (1992) Biochemistry 31, 1195-1200] that, during the rapid phase of Ca2+ uptake into sarcoplasmic reticulum (SR), internalization and binding of Ca2+ to the cytoplasmic high-affinity binding sites of the Ca2+ ATPase occur simultaneously, resulting in a transient supernumerary Ca/ATP stoichiometry. Here we address the question of whether the cytoplasmic high-affinity and the luminal low-affinity Ca2+ binding sites of the SR Ca2+ ATPase also coexist. SR vesicles were loaded with Ca2+ (0-10 mM), and then the kinetics of EP formation and decomposition as well as the maximum level of EP formed from radiolabeled ATP were determined at conditions which only allow single-cycle reactions to occur: empty or Ca-loaded SR vesicles (in micromolar extravesicular Ca2+) were either mixed with ATP plus millimolar EGTA or added in amounts that set a Ca2+ ATPase/ATP ratio of 80-85 at the initiation of the reaction. The rates of EP formation and decomposition were both significantly reduced in Ca-loaded, compared to empty (ionomycin-treated), vesicles. However, the value of EPmax was unaltered by Ca-loading, suggesting the existence of the enzyme intermediate, E.Ca2(cyt).Ca2(lum), i.e., the coexistence of the cytoplasmic and the luminal Ca2+ binding sites of the Ca-pump. These results suggest that the uphill transport of Ca2+ might not be based on an alternating relocation and conversion of the Ca2+ binding sites of the Ca2+ ATPase.

The vectorial specificity for calcium binding to the CaATPase of sarcoplasmic reticulum is controlled by phosphorylation, not by an E-E* conformational change

The E-E* model for calcium pumping by the CaATPase of sarcoplasmic reticulum includes two distinct conformational states of the enzyme, E and E*. Exterior Ca2+ binds only to E and interior Ca2+ binds only to E*. Therefore, it is expected that there will be competition between the binding of calcium to the unphosphorylated enzyme from the two sides of the membrane. The equilibrium concentration of cECa2, the enzyme with Ca2+ bound at the exterior site, was measured at different Ca2+ concentrations with empty sarcoplasmic reticulum vesicles (SRV) and with SRV loaded with 40 mM Ca2+ by reaction with 0.5 mM [gamma-32P]ATP plus 20 mM EGTA for 13 ms (100 mM KCl, 5 mM MgSO4, 40 mM Mops/KOH, pH 7.0, 25 degrees C). The sigmoidal dependence on free exterior calcium concentration of the concentration of cECa2, measured as [32P]phosphoenzyme, is identical with empty and loaded SRV, within experimental error. The value of K0.5 is 2.8 microM, and the Hill coefficient is 2. This result shows that there is no competition between binding of Ca2+ to the outside and the inside of the membrane. This is consistent with a model in which the vectorial specificity for calcium binding is controlled by the chemical state of the enzyme, rather than a simple conformational change. It is concluded that there are not two interconverting forms of the free enzyme, E and E*, instead the vectorial specificity for binding and dissociation of Ca2+ is determined by the state of phosphorylation of the CaATPase.

Simultaneous binding of calcium and vanadate to the Ca2+-ATPase of sarcoplasmic reticulum

The interaction of vanadate with the Ca2+-ATPase of sarcoplasmic reticulum vesicles has been studied by making use of the ATPase activity as a measure of uncomplexed enzyme. The binding/dissociation is slow, so that initial rates can be used to study the equilibrium binding. The results indicate that in addition to a Ca2+-free complex E.Van (KV = 0.4 microM), there must also be a Ca2+-enzyme-vanadate complex (K'V = 7 microM). This observation is confirmed by the difference between the kinetics of decay of activity on vanadate addition, and on addition of ATP to enzyme preincubated with vanadate and Ca2+, which requires two enzyme-vanadate complexes. ATP increases the apparent affinity of the enzyme for vanadate by inducing calcium release. Upper limits for the kinetic parameters for vanadate binding and dissociation are estimated.

A model for the phosphorylation of the Ca2+ + Mg2+-activated ATPase by phosphate

We have shown that changes in fluorescence intensity for the Ca2+ + Mg2+-activated ATPase of sarcoplasmic reticulum labelled with fluorescein isothiocyanate following the addition of Ca2+ can give the ratio of the two conformations (E1 and E2) of the ATPase. We show that the fluorescence response to Ca2+ is unaffected by Mg2+, phosphate or K+, implying that these ions bind equally well to the E1 and E2 conformations. A model is presented for phosphorylation of the ATPase by phosphate as a function of pH, Mg2+, K+ and Ca2+.

Calmodulin X (Ca2+)4 is the active calmodulin-calcium species activating the calcium-, calmodulin-dependent protein kinase of cardiac sarcoplasmic reticulum in the regulation of the calcium pump

Calcium-, calmodulin-dependent phosphorylation of cardiac sarcoplasmic reticulum increases the rate of calcium transport. The complex dependence of calmodulin-dependent phosphoester formation on free calcium and total calmodulin concentrations can be satisfactorily explained by assuming that CaM X (Ca2+)4 is the sole calmodulin-calcium species which activates the calcium-, calmodulin-dependent, membrane-bound protein kinase. The apparent dissociation constant of the E X CaM X (Ca2+)4 complex determined from the calcium dependence of calmodulin-dependent phosphoester formation over a 100-fold range of total calmodulin concentrations (0.01-1 microM) was 0.9 nM; the respective apparent dissociation constant at 0.8 mM free calcium, 1 mM free magnesium with low calmodulin concentrations (0.1-50 nM) was 2.60 nM. These results are in good agreement with the apparent dissociation constant of 2.54 nM of high affinity calmodulin binding determined by 125I-labelled calmodulin binding to sarcoplasmic reticulum fractions at 1 mM free calcium, 1 mM free magnesium and total calmodulin concentration ranging from 0.1 to 150 nM, i.e. conditions where approximately 98% of the total calmodulin is present as CaM X (Ca2+)4. The apparent dissociation constant of the calcium-free calmodulin-enzyme complex (E X CaM) is at least 100-fold greater than the apparent dissociation constant of the E X CaM X (Ca2+)4 complex, as judged from non-saturation 125I-labelled calmodulin binding at total calmodulin concentrations of up to 150 nM, in the absence of calcium.

The sarcoplasmic reticulum calcium pump. Localization of free energy transfer to discrete steps of the reaction cycle

Free energy transduction in active transport resembles other protein-catalyzed processes, occurring by an ordered sequence of discrete bond-breaking and bond-making steps. The bonds that affect the transported ion directly are chelation bonds, which alter the chemical potential of the bound ion, but not its chemical identity. Available data for the sarcoplasmic reticulum Ca pump (admittedly incomplete) suggest that more than 50% of the free energy transfer may be localized to a single step of the reaction cycle.

Twenty questions concerning the reaction cycle of the sarcoplasmic reticulum calcium pump

The problem of "mechanism" for the calcium pump may be divided into three parts. (1) It is an enzyme catalyzing the hydrolysis of ATP. (2) At some stage of the reaction cycle it provides a pathway through the otherwise impermeable phospholipid bilayer. (3) The two properties are linked so as to provide exchange of free energy between the two substrates (ATP and Ca2+), without any exchange of matter. The third part is the most interesting, and the mechanistic problem it poses is common to all chemiosmotic free energy transducers. All three aspects of the mechanism are reviewed here, with special emphasis on the remaining experimental questions that need to be resolved. The review will show that even such fundamental questions as the exact stoichiometry of the catalyzed reaction have not yet received definitive answers.

The vanadate complex of the calcium-transport ATPase of the sarcoplasmic reticulum, its formation and dissociation

Vanadate binding to different sarcoplasmic reticulum membrane preparations was determined by measuring bound vanadate colorimetrically and by phosphorylating the vanadate-free enzyme fraction with [gamma-32P] ATP. Colorimetry allowed the study of the dependence of equilibrium vanadate binding on ionized magnesium and the displacing effect of ionized calcium at vanadate concentrations greater than 0.1 mM only. At saturating magnesium concentration the enzyme binds 6-8 nmol vanadate/mg protein and half-maximum saturation is reached at 40 microM. Vanadate is displaced from the enzyme when its high-affinity calcium-binding sites are saturated and conversely calcium is solely displaced from its high-affinity binding sites by vanadate. The phosphorylation procedure allowed the measurement of equilibrium binding as well as the kinetics of vanadate binding and release at vanadate concentrations below 0.1 mM. Half-times of 30s and 3s were observed for vanadate release induced by 0.1 mM and 1 mM calcium respectively. Millimolar concentrations of ATP are required for vanadate displacement. Under equilibrium conditions the enzyme displays an affinity for vanadate of 1.6 X 10(6) M-1. The dependence on the concentration of vanadate of the rate of vanadate binding yielded an affinity of only 1 X 10(4) M-1. Closed vesicles bind vanadate much more slowly than calcium-permeable preparations. The initial rate of calcium-induced vanadate dissociation is accelerated considerably when the vesicles are made calcium permeable. The rate of vanadate dissociation from calcium-permeable vesicles reaches half-maximum values at 1-2 mM calcium indicating that the internal low-affinity calcium-binding sites must first be occupied in order to release bound vanadate. The results suggest that vanadate binding leads to a transition of the external high to internal low-affinity calcium-binding sites.