Relationship between oxygen consumption and sex of bovine in vitro fertilized embryos

Real-Time Analysis of Oxygen Gradient in Oocyte Respiration Using a High-Density Microelectrode Array

Physiological events related to oxygen concentration gradients provide valuable information to determine the state of metabolizing biological cells. The existing oxygen sensing methods (i.e., optical photoluminescence, magnetic resonance, and scanning electrochemical) are well-established and optimized for existing in vitro analyses. However, such methods also present various limitations in resolution, real-time sensing performance, complexity, and costs. An electrochemical imaging system with an integrated microelectrode array (MEA) would offer attractive means of measuring oxygen consumption rate (OCR) based on the cell’s two-dimensional (2D) oxygen concentration gradient. This paper presents an application of an electrochemical sensor platform with a custom-designed complementary-metal-oxide-semiconductor (CMOS)-based microchip and its Pt-coated surface MEA. The high-density MEA provides 16,064 individual electrochemical pixels that cover a 3.6 mm × 3.6 mm area. Utilizing the three-electrode configuration, the system is capable of imaging low oxygen concentration (18.3 µM, 0.58 mg/L, or 13.8 mmHg) at 27.5 µm spatial resolution and up to 4 Hz temporal resolution. In vitro oxygen imaging experiments were performed to analyze bovine cumulus-oocytes-complexes cells OCR and oxygen flux density. The integration of a microfluidic system allows proper bio-sample handling and delivery to the MEA surface for imaging. Finally, the imaging results are processed and presented as 2D heatmaps, representing the dissolved oxygen concentration in the immediate proximity of the MEA. This paper provides the results of real-time 2D imaging of OCR of live cells/tissues to gain spatial and temporal dynamics of target cell metabolism.

Prediction of the in vitro developmental competence of early-cleavage-stage human embryos with time-lapse imaging and oxygen consumption rate measurement

PURPOSE

To assess an embryo's ability to develop into a good-quality blastocyst during the early-cleavage stage using time-lapse imaging and the oxygen consumption rate.

METHODS

In total, 942 zygotes had their oxygen consumption rates measured. In total, 282 zygotes were assessed by using time-lapse imaging. In total, 121 zygotes were examined by using both their oxygen consumption rate and time-lapse imaging.

RESULTS

The embryos with moderate respiration rates of between 0.41 and 0.61 (×1014/mol s-1) on day 3 had a 22.1% chance of becoming good-quality blastocysts; those outside that range had a 14.3% chance. With the time-lapse system, when the first division was within 24 hours, 22.3% of the embryos grew to good blastocysts. After 24 hours, the rate dropped to 8.6%. The intervals between two consecutive cleavages were calculated and the duration of the second cell cycle was defined. When the time was between nine hours and 13 hours, there was a higher rate of good blastocysts. Regarding both criteria, when the embryos had progressed in the optimal range, a high percentage of them had become good blastocysts; it was 8.0% outside of that range.

CONCLUSION

Individual embryos with the potential to develop into good-quality blastocysts could be selected at day 3 of culture using these systems.

Selective AKR1C3 inhibitors do not recapitulate the anti-leukaemic activities of the pan-AKR1C inhibitor medroxyprogesterone acetate

Background:

We and others have identified the aldo-keto reductase AKR1C3 as a potential drug target in prostate cancer, breast cancer and leukaemia. As a consequence, significant effort is being invested in the development of AKR1C3-selective inhibitors.

Methods:

We report the screening of an in-house drug library to identify known drugs that selectively inhibit AKR1C3 over the closely related isoforms AKR1C1, 1C2 and 1C4. This screen initially identified tetracycline as a potential AKR1C3-selective inhibitor. However, mass spectrometry and nuclear magnetic resonance studies identified that the active agent was a novel breakdown product (4-methyl(de-dimethylamine)-tetracycline (4-MDDT)).

Results:

We demonstrate that, although 4-MDDT enters AML cells and inhibits their AKR1C3 activity, it does not recapitulate the anti-leukaemic actions of the pan-AKR1C inhibitor medroxyprogesterone acetate (MPA). Screens of the NCI diversity set and an independently curated small-molecule library identified several additional AKR1C3-selective inhibitors, none of which had the expected anti-leukaemic activity. However, a pan AKR1C, also identified in the NCI diversity set faithfully recapitulated the actions of MPA.

Conclusions:

In summary, we have identified a novel tetracycline-derived product that provides an excellent lead structure with proven drug-like qualities for the development of AKR1C3 inhibitors. However, our findings suggest that, at least in leukaemia, selective inhibition of AKR1C3 is insufficient to elicit an anticancer effect and that multiple AKR1C inhibition may be required.

Metabolite Profiling in the Pursuit of Biomarkers for IVF Outcome: The Case for Metabolomics Studies

Background. This paper presents the literature on biomarkers of in vitro fertilisation (IVF) outcome, demonstrating the progression of these studies towards metabolite profiling, specifically metabolomics. The need for more, and improved, metabolomics studies in the field of assisted conception is discussed. Methods. Searches were performed on ISI Web of Knowledge SM for literature associated with biomarkers of oocyte and embryo quality, and biomarkers of IVF outcome in embryo culture medium, follicular fluid (FF), and blood plasma in female mammals. Results. Metabolomics in the field of female reproduction is still in its infancy. Metabolomics investigations of embryo culture medium for embryo selection have been the most common, but only within the last five years. Only in 2012 has the first metabolomics investigation of FF for biomarkers of oocyte quality been reported. The only metabolomics studies of human blood plasma in this context have been aimed at identifying women with polycystic ovary syndrome (PCOS). Conclusions. Metabolomics is becoming more established in the field of assisted conception, but the studies performed so far have been preliminary and not all potential applications have yet been explored. With further improved metabolomics studies, the possibility of identifying a method for predicting IVF outcome may become a reality.

Chemically assisted enucleation results in higher G6PD expression in early bovine female embryos obtained by somatic cell nuclear transfer

Despite extensive efforts, low efficiency is still an issue in bovine somatic cell nuclear transfer (SCNT). The hypothesis of our study was that the use of cytoplasts produced by chemically assisted enucleation (EN) would improve nuclear reprogramming in nuclear transfer (NT)-derived embryos because it results in lower damage and higher cytoplasm content than conventional EN. For that purpose, we investigated the expression of two X-linked genes: X inactive-specific transcript (XIST) and glucose 6-phosphate dehydrogenase (G6PD). In the first experiment, gene expression was assessed in day-7 female blastocysts from embryonic cell NT (ECNT) groups [conventional, ECNT conv; chemically assisted, ECNT deme (demecolcine)]. Whereas in the ECNT conv group, only one embryo (25%; n=4) expressed XIST transcripts, most embryos showed XIST expression (75%; n=4) in the ECNT deme group. However, no significant differences in transcript abundance of XIST and G6PD were found when comparing the embryos from all groups. In a second experiment using somatic cells as nuclear donors, we evaluated gene expression profiles in female SCNT-derived embryos. No significant differences in relative abundance (RA) of XIST transcripts were observed among the groups. Nonetheless, higher (p<0.05) levels of G6PD were observed in SCNT deme and in vitro-derived groups in comparison to SCNT conv. To know whether higher G6PD expression in embryos derived from SCNT chemically assisted EN indicates higher metabolism in embryos considered of superior quality or if the presence of higher reactive oxygen species (ROS) levels generated by the increased oxygen consumption triggers G6PD activation, the expression of genes related to stress response should be investigated in embryos produced by that technique.

Time-dependent O2 consumption patterns determined optimal time ranges for selecting viable human embryos

OBJECTIVE

To evaluate correlations between metabolic activity and implantation potential of transferred embryos in a study based on oxygen (O(2)) consumption (OC) measurements, because O(2) uptake is directly related to the capacity of an embryo to produce energy via adenosine triphosphate.

DESIGN

Retrospective cohort study.

SETTING

Infertility institute.

PATIENT(S)

Five hundred seventy-five injected oocytes in 56 first oocyte donation cycles with embryo transfer on day 3.

INTERVENTION(S)

None.

MAIN OUTCOME MEASURE(S)

We analyzed embryo destination viability and implantation depending on the embryo OC rate obtained from 47,741 measurements (up to 85 measurements per embryo, 2-3 measurements per hour). OC patterns were analyzed in relation to the time elapsed from sperm microinjection, to the final destination of the embryos (transferred, frozen, or discarded), to ongoing pregnancy, and by successful implantation.

RESULT(S)

OC was found to decrease during embryonic development. OC patterns from 52 hours onward showed the strongest correlation with implantation success. Regarding embryo destination, the same patterns were observed.

CONCLUSION(S)

OC from individual embryos revealed significant differences, mainly close to the time of transfer, when OC pattern was associated with successful implantation. Therefore, measuring the OC pattern of human embryos culture up to 72 hours could be used to select the embryo with best developmental potential.

A review of the promises and pitfalls of oocyte and embryo metabolomics

Embryo viability assessment is one of the most important and challenging tasks in IVF. Evaluation of embryo quality is critical when selecting the best embryo(s) to transfer or cryopreserve. Until recently, the only instrument used for embryo evaluation was the inverted light microscope, which provided information based on morphological characteristics. Developmental and morphological information gained from microscopic assessment have been positively associated with IVF outcomes, including pregnancy and implantation rates. However, based on general statistics, it is clear that IVF currently still results in relatively low pregnancy rates, while simultaneously being associated with relatively high multiple implantation rates. Only with novel embryo assessment and selection procedures would it be possible to improve these outcomes. Accordingly, it has been proposed that it is possible to test the culture environment of a developing embryo to gain valuable information regarding its viability. Different approaches have been used. These include the measurement of oxygen consumption by the embryo and testing of the soluble HLA-G in the environment, as it was proposed that secretion of HLA-G is associated with higher implantation rates. Amino acid turnover, which appears to be correlated to blastocyst development, can be measured as an indication of embryo viability. Other approaches, such as time-lapse video observation or cumulus cell gene expression analysis, may be used in the future to gain a broader understanding of embryo viability. Proteomics and metabolomics are also useful tools for assessment of embryo developmental potential. Results from recent studies on predicting embryo viability by analyzing the metabolome of different stage embryos are promising, as increases in pregnancy and implantation rates were obtained using the metabolomic profile for embryo selection. Several novel approaches are currently being developed to aid in viability assessment. These need to be evaluated in prospective clinical trials, while considering their practicality in the clinical laboratory.

Advances in the application of scanning electrochemical microscopy to bioanalytical systems

Scanning electrochemical microscopy (SECM) is a powerful surface characterisation technique that allows for the electrochemical profiling of surfaces with sub micrometer resolution. While SECM has been most widely used to electrochemically study and profile non-biological surfaces and processes, the technique has in recent years, been increasingly used for the study of biological systems - and this is the focus of this review. An overview of SECM and how the technique may be applied to the study of biological systems will first be given. SECM and its application to the study of cells, enzymes and DNA will each be considered in detail. The review will conclude with a discussion of future directions and scope for further developments and applications.

Respiration rates correlate with mRNA expression of G6PD and GLUT1 genes in individual bovine in vitro-produced blastocysts

Quantification of embryo respiration is a promising procedure to assess embryonic metabolism and possibly select viable embryos. At the blastocyst stage, ATP is produced by glycolysis and oxidative phosphorylation, processes that require uptake of oxygen and glucose, which is regulated by the expression of GLUT1 and G6PD. The purpose of the present study was to investigate the relationship between respiration rates and relative abundances of G6PD and GLUT1 transcripts in individual bovine blastocysts produced in vitro. Respiration rates of 104 bovine in vitro-produced blastocysts were measured individually using the nanorespirometer technology. Real-time RT-PCR was employed to determine the relative abundance of G6PD and GLUT1 mRNA in individual embryos. The mean respiration rates were similar for male and female blastocysts of the same developmental stage, but the sex ratio was skewed towards males. GLUT1 expression was down-regulated in female versus male embryos. In contrast, a approximately 1.8-fold increase in the expression of G6PD mRNA was observed in female blastocysts when compared to male blastocysts, indicating that dosage compensation for this gene had not yet occurred. Both GLUT1 and G6PD expression levels were affected by morphological quality and stage of development. Expression of GLUT1 and G6PD mRNAs was correlated with respiration rates, indicating that, in metabolically active blastocysts, uptake of oxygen and glucose are jointly increased. These findings suggest that expression of genes for oxidative phosphorylation and glycolysis are both involved in oxygen demanding ATP production.

Scanning electrochemical microscopy for direct imaging of reaction rates

Not only in electrochemistry but also in biology and in membrane transport, localized processes at solid-liquid or liquid-liquid interfaces play an important role at defect sites, pores, or individual cells, but are difficult to characterize by integral investigation. Scanning electrochemical microscopy is suitable for such investigations. After two decades of development, this method is based on a solid theoretical foundation and a large number of demonstrated applications. It offers the possibility of directly imaging heterogeneous reaction rates and locally modifying substrates by electrochemically generated reagents. The applications range from classical electrochemical problems, such as the investigation of localized corrosion and electrocatalytic reactions in fuel cells, sensor surfaces, biochips, and microstructured analysis systems, to mass transport through synthetic membranes, skin and tissue, as well as intercellular communication processes. Moreover, processes can be studied that occur at liquid surfaces and liquid-liquid interfaces.

Quantification of embryo quality by respirometry

It is generally accepted that assessment of embryo metabolism, in particular oxygen consumption, may improve embryo selection by identifying the embryos with higher developmental competence. Several methods have been employed to measure embryonic oxygen consumption, but most of them were detrimental to subsequent embryo development. Recently, we have introduced the Nanorespirometer system, which is a non-invasive and highly sensitive technology developed for the individual measurement of embryonic respiration rates. This technology is able to perform single measurements at a fixed time or stage of embryonic development without adversely influencing embryo viability. Concomitantly, and based on the same principles, a second technology -- the Embryo Respirometer -- has been developed. The Embryo Respirometer allows the continuous measurement of individual respiration rates with simultaneous acquisition of digital images of each embryo, during the entire culture period (6-7 days). In this review, both technologies are described and their potential use as diagnostic tools for improving embryo selection in bovine and human following IVF treatments is discussed. Correlations between respiration rates of individual embryos and other parameters such as morphological quality, sex, stage of development, kinetics, diameter, expression of key metabolic genes and subsequent viability following embryo transfer are also examined. On the basis of the results obtained, it is postulated that assessment of embryonic respiration rates in association with other viability parameters allows for a more accurate embryo evaluation, both under clinical and research conditions.

Scanning electrochemical microscopy: principles and applications to biophysical systems

This review highlights numerous and wide ranging biophysical and biochemical applications of scanning electrochemical microscopy (SECM). SECM instrumentation and theoretical modelling, necessary for experimental interpretation, are outlined, followed by a detailed discussion of the diverse applications of this technique. These include the measurement of flow through membranes, the determination of kinetic parameters of reactions, the investigation of the permeability of small molecules in tissues and monitoring biological processes, such as the production of oxygen or nitric oxide by cells. The significant impact of micro-electrochemical techniques on our understanding of basic physicochemical processes at biologically relevant interfaces is also considered. Studies reviewed include transport across and within bilayers and monolayers. Recent advances in SECM include the combination of SECM with other techniques, such as atomic force microscopy and optical microscopy. These developments are highlighted, along with prospects for the future.

Oxygen consumption of cell suspension in a poly(dimethylsiloxane) (PDMS) microchannel estimated by scanning electrochemical microscopy

A quantitative analysis of the oxygen concentration profile near a poly(dimethylsiloxane) (PDMS) microfluidic device was performed using scanning electrochemical microscopy (SECM). A microchannel filled with sodium sulfite (Na(2)SO(3)) aqueous solution was imaged by SECM, showing that the oxygen diffusion layer of the PDMS microchannel was observed to be hemicylindrical. Based on a theoretical analysis of the hemicylindrical diffusion layer of the microchannel, the total oxygen mass transfer rates of oxygen to the PDMS microchannel filled with the Na(2)SO(3) solution was calculated to be (4.01 +/- 0.30) x 10(-12) mol s(-1). This is the maximum value of the oxygen transfer rate for this PDMS microchannel device. The oxygen consumption rate increased almost linearly with the logarithm of the concentration of E. coli cells (10(6) approximately 10(8) cells). The respiratory activity for a single E. coli cell was estimated to be approximately 4.31 x 10(-20) mol s(-1) cell(-1).