Stable implantation of orthogonal sensor circuits in Gram-negative bacteria for environmental release

Advancing biological investigations using portable sensors for detection of sensitive samples

Portable biosensors are emerged as powerful diagnostic tools for analyzing intricately complex biological samples. These biosensors offer sensitive detection capabilities by utilizing biomolecules such as proteins, nucleic acids, microbes or microbial products, antibodies, and enzymes. Their speed, accuracy, stability, specificity, and low cost make them indispensable in forensic investigations and criminal cases. Notably, portable biosensors have been developed to rapidly detect toxins, poisons, body fluids, and explosives; they have proven invaluable in forensic examinations of suspected samples, generating efficient results that enable effective and fair trials. One of the key advantages of portable biosensors is their ability to provide sensitive and non-destructive detection of forensic samples without requiring extensive sample preparation, thereby reducing the possibility of false results. This comprehensive review provides an overview of the current advancements in portable biosensors for the detection of sensitive materials, highlighting their significance in advancing investigations and enhancing sensitive sample detection capabilities.

Water potential governs the effector specificity of the transcriptional regulator XylR of Pseudomonas putida

The biodegradative capacity of bacteria in their natural habitats is affected by water availability. In this work, we have examined the activity and effector specificity of the transcriptional regulator XylR of the TOL plasmid pWW0 of Pseudomonas putida mt-2 for biodegradation of m-xylene when external water potential was manipulated with polyethylene glycol PEG8000. By using non-disruptive luxCDEAB reporter technology, we noticed that the promoter activated by XylR (Pu) restricted its activity and the regulator became more effector-specific towards head TOL substrates when cells were grown under water subsaturation. Such a tight specificity brought about by water limitation was relaxed when intracellular osmotic stress was counteracted by the external addition of the compatible solute glycine betaine. With these facts in hand, XylR variants isolated earlier as effector-specificity responders to the non-substrate 1,2,4-trichlorobenzene under high matric stress were re-examined and found to be unaffected by water potential in vivo. All these phenomena could be ultimately explained as the result of water potential-dependent conformational changes in the A domain of XylR and its effector-binding pocket, as suggested by AlphaFold prediction of protein structures. The consequences of this scenario for the evolution of specificities in regulators and the emergence of catabolic pathways are discussed.

An updated structural model of the A domain of the Pseudomonas putida XylR regulator poses an atypical interplay with aromatic effectors

A revised model of the aromatic binding A domain of the σ⁵⁴ -dependent regulator XylR of Pseudomonas putida mt-2 was produced based on the known 3D structures of homologous regulators PoxR, MopR and DmpR. The resulting frame was instrumental for mapping a number of mutations known to alter effector specificity, which were then reinterpreted under a dependable spatial reference. Some of these changes involved the predicted aromatic binding pocket but others occurred in distant locations, including dimerization interfaces and putative zinc binding site. The effector pocket was buried within the protein structure and accessible from the outside only through a narrow tunnel. Yet, several loop regions of the A domain could provide the flexibility required for widening such a tunnel for passage of aromatic ligands. The model was experimentally validated by treating the cells in vivo and the purified protein in vitro with benzyl bromide, which reacts with accessible nucleophilic residues on the protein surface. Structural and proteomic analyses confirmed the predicted in/out distribution of residues but also supported two additional possible scenarios of interaction of the A domain with aromatic effectors: a dynamic interaction of the fully structured yet flexible protein with the aromatic partner and/or inducer-assisted folding of the A domain.

An autonomous bioluminescent bacterial biosensor module for outdoor sensor networks, and its application for the detection of buried explosives

We describe a miniaturized field-deployable biosensor module, designed to function as an element in a sensor network for standoff monitoring and mapping of environmental hazards. The module harbors live bacterial sensor cells, genetically engineered to emit a bioluminescent signal in the presence of preselected target materials, which act as its core sensing elements. The module, which detects and processes the biological signal, composes a digital record that describes its findings, and can be transmitted to a remote receiver. The module is an autonomous self-contained unit that can function either as a standalone sensor, or as a node in a sensor network. The biosensor module can potentially be used for detecting any target material to which the sensor cells were engineered to respond. The module described herein was constructed to detect the presence of buried landmines underneath its footprint. The demonstrated detection sensitivity was 0.25 mg 2,4-dinitrotoluene per Kg soil.

Hydrogel-based biocontainment of bacteria for continuous sensing and computation

Genetically modified microorganisms (GMMs) can enable a wide range of important applications including environmental sensing and responsive engineered living materials. However, containment of GMMs to prevent environmental escape and satisfy regulatory requirements is a bottleneck for real-world use. While current biochemical strategies restrict unwanted growth of GMMs in the environment, there is a need for deployable physical containment technologies to achieve redundant, multi-layered and robust containment. We developed a hydrogel-based encapsulation system that incorporates a biocompatible multilayer tough shell and an alginate-based core. This deployable physical containment strategy (DEPCOS) allows no detectable GMM escape, bacteria to be protected against environmental insults including antibiotics and low pH, controllable lifespan and easy retrieval of genomically recoded bacteria. To highlight the versatility of DEPCOS, we demonstrated that robustly encapsulated cells can execute useful functions, including performing cell-cell communication with other encapsulated bacteria and sensing heavy metals in water samples from the Charles River.

A Whole-Cell Biosensor for Point-of-Care Detection of Waterborne Bacterial Pathogens

Water contamination by pathogenic bacteria is a major public health concern globally. Monitoring bacterial contamination in water is critically important to protect human health, but this remains a critical challenge. Engineered whole-cell biosensors created through synthetic biology hold great promise for rapid and cost-effective detection of waterborne pathogens. In this study, we created a novel whole-cell biosensor to detect water contamination by Pseudomonas aeruginosa and Burkholderia pseudomallei, which are two critical bacterial pathogens and are recognized as common causative agents for waterborne diseases. The biosensor detects the target bacterial pathogens by responding to the relevant quorum sensing signal molecules. Particularly, this study constructed and characterized the biosensor on the basis of the QscR quorum sensing signal system for the first time. We first designed and constructed a QscR on the basis of the sensing module in the E. coli host cell and integrated the QscR sensing module with a reporting module that expressed an enhanced green fluorescent protein (EGFP). The results demonstrated that the biosensor had high sensitivity in response to the quorum sensing signals of the target bacterial pathogens. We further engineered a biosensor that expressed a red pigment lycopene in the reporting module to produce a visible signal readout for the pathogen detection. Additionally, we investigated the feasibility of a paper-based assay by immobilizing the lycopene-based whole-cell biosensor on paper with the aim to build a prototype for developing portable detection devices. The biosensor would provide a simple and inexpensive alternative for timely and point-of-care detection of water contamination and protect human health.

Design and engineering of E. coli metabolic sensor strains with a wide sensitivity range for glycerate

Microbial biosensors are used to detect the presence of compounds provided externally or produced internally. The latter case is commonly constrained by the need to screen a large library of enzyme or pathway variants to identify those that can efficiently generate the desired compound. To address this limitation, we suggest the use of metabolic sensor strains which can grow only if the relevant compound is present and thus replace screening with direct selection. We used a computational platform to design metabolic sensor strains with varying dependencies on a specific compound. Our method systematically explores combinations of gene deletions and identifies how the growth requirement for a compound changes with the media composition. We demonstrate this approach by constructing a set of E. coli glycerate sensor strains. In each of these strains a different set of enzymes is disrupted such that central metabolism is effectively dissected into multiple segments, each requiring a dedicated carbon source. We find an almost perfect match between the predicted and experimental dependence on glycerate and show that the strains can be used to accurately detect glycerate concentrations across two orders of magnitude. Apart from demonstrating the potential application of metabolic sensor strains, our work reveals key phenomena in central metabolism, including spontaneous degradation of central metabolites and the importance of metabolic sinks for balancing small metabolic networks.

High-Yield Production of 4-Hydroxybenzoate From Glucose or Glycerol by an Engineered Pseudomonas taiwanensis VLB120

Aromatic compounds such as 4-hydroxybenzoic acid are broadly applied in industry for a myriad of applications used in everyday life. However, their industrial production currently relies heavily on fossil resources and involves environmentally unfriendly production conditions, thus creating the need for more sustainable biotechnological alternatives. In this study, synthetic biology was applied to metabolically engineer Pseudomonas taiwanensis VLB120 to produce 4-hydroxybenzoate from glucose, xylose, or glycerol as sole carbon sources. Genes encoding a 4-hydroxybenzoate production pathway were integrated into the host genome and the flux toward the central precursor tyrosine was enhanced by overexpressing genes encoding key enzymes of the shikimate pathway. The flux toward tryptophan biosynthesis was decreased by introducing a P290S point mutation in the trpE gene, and degradation pathways for 4-hydroxybenzoate, 4-hydroxyphenylpyruvate and 3-dehydroshikimate were knocked out. The resulting production strains were tailored for the utilization of glucose and glycerol through the rational modification of central carbon metabolism. In batch cultivations with a completely mineral medium, the best strain produced 1.37 mM 4-hydroxybenzoate from xylose with a C-mol yield of 8% and 3.3 mM from glucose with a C-mol yield of 19.0%. Using glycerol as a sole carbon source, the C-mol yield increased to 29.6%. To our knowledge, this is the highest yield achieved by any species in a fully mineral medium. In all, the efficient conversion of bio-based substrates into 4-hydroxybenzoate by these deeply engineered P. taiwanensis strains brings the renewable production of aromatics one step closer.

Engineering and modification of microbial chassis for systems and synthetic biology

Engineering and modifying synthetic microbial chassis is one of the best ways not only to unravel the fundamental principles of life but also to enhance applications in the health, medicine, agricultural, veterinary, and food industries. The two primary strategies for constructing a microbial chassis are the top-down approach (genome reduction) and the bottom-up approach (genome synthesis). Research programs on this topic have been funded in several countries. The ‘Minimum genome factory’ (MGF) project was launched in 2001 in Japan with the goal of constructing microorganisms with smaller genomes for industrial use. One of the best examples of the results of this project is E. coli MGF-01, which has a reduced-genome size and exhibits better growth and higher threonine production characteristics than the parental strain [1]. The ‘cell factory’ project was carried out from 1998 to 2002 in the Fifth Framework Program of the EU (European Union), which tried to comprehensively understand microorganisms used in the application field. One of the outstanding results of this project was the elucidation of proteins secreted by Bacillus subtilis, which was summarized as the ‘secretome’ [2]. The GTL (Genomes to Life) program began in 2002 in the United States. In this program, researchers aimed to create artificial cells both in silico and in vitro, such as the successful design and synthesis of a minimal bacterial genome by John Craig Venter's group [3]. This review provides an update on recent advances in engineering, modification and application of synthetic microbial chassis, with particular emphasis on the value of learning about chassis as a way to better understand life and improve applications.

Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications

Piezoelectric biosensors are a group of analytical devices working on a principle of affinity interaction recording. A piezoelectric platform or piezoelectric crystal is a sensor part working on the principle of oscillations change due to a mass bound on the piezoelectric crystal surface. In this review, biosensors having their surface modified with an antibody or antigen, with a molecularly imprinted polymer, with genetic information like single stranded DNA, and biosensors with bound receptors of organic of biochemical origin, are presented and discussed. The mentioned recognition parts are frequently combined with use of nanoparticles and applications in this way are also introduced. An overview of the current literature is given and the methods presented are commented upon.

Microbial bioreporters of trace explosives

Since its introduction as an explosive in the late 19th century, 2,4,6-trinitrotoluene (TNT), along with other explosive compounds, has left numerous environmental marks. One of these is widespread soil and water pollution by trace explosives in military proving grounds, manufacturing facilities, or actual battlefields. Another dramatic impact is that exerted by the millions of landmines and other explosive devices buried in large parts of the world, causing extensive loss of life, injuries, and economical damage. In this review we highlight recent advances in the design and construction of microbial bioreporters, molecularly engineered to generate a quantifiable dose-dependent signal in the presence of trace amounts of explosives. Such sensor strains may be employed for monitoring environmental pollution as well as for the remote detection of buried landmines.

Construction of 2,4,6-Trinitrotoluene Biosensors with Novel Sensing Elements from Escherichia coli K-12 MG1655

Detection of 2,4,6-trinitrotoluene (TNT) has been extensively studied since it is a common explosive filling for landmines, posing significant threats to the environment and human safety. The rapid advances in synthetic biology give new hope to detect such toxic and hazardous compounds in a more sensitive and safe way. Biosensor construction anticipates finding sensing elements able to detect TNT. As TNT can induce some physiological responses in E. coli, it may be useful to define the sensing elements from E. coli to detect TNT. An E. coli MG1655 genomic promoter library containing nearly 5,400 elements was constructed. Five elements, yadG, yqgC, aspC, recE, and topA, displayed high sensing specificity to TNT and its indicator compounds 1,3-DNB and 2,4-DNT. Based on this, a whole cell biosensor was constructed using E. coli, in which green fluorescent protein was positioned downstream of the five sensing elements via genetic fusion. The threshold value, detection time, EC200 value, and other aspects of five sensing elements were determined and the minimum responding concentration to TNT was 4.75 mg/L. According to the synthetic biology, the five sensing elements enriched the reservoir of TNT-sensing elements, and provided a more applicable toolkit to be applied in genetic routes and live systems of biosensors in future.

Synthetic Cell-Based Sensors with Programmed Selectivity and Sensitivity

Bacteria live in an ever changing environment and, to adapt their physiology, they have to sense the changes. Our current understanding of the mechanisms and elements involved in the detection and processing of these environmental signals grant us access to an array of genetic components able to process such information. As engineers can use different electronic components to build a circuit, we can rewire the cellular components to create digital logic and analogue gene circuits that will program cell behaviour in a designed manner in response to a specific stimulus. Here we present the methods and protocols for designing and implementing synthetic cell-based biosensors that use engineered genetic logic and analogue amplifying circuits to significantly increase selectivity and sensitivity, for example, for heavy metal ions in an aqueous environment. The approach is modular and can be readily applied to improving the sensing limit and performance of a range of microbial cell-based sensors to meet their real world detection requirement.

Engineering Gram-Negative Microbial Cell Factories Using Transposon Vectors

The construction of microbial cell factories à la carte largely depends on specialized molecular biology and synthetic biology tools needed to reprogram bacteria for modifying their existing functions or for bestowing them with new-to-Nature tasks. In this chapter, we document the use of a series of broad-host-range mini-Tn5 vectors for the delivery of gene(s) into the chromosome of Gram-negative bacteria and for the generation of saturated, random mutagenesis libraries for studies of gene function. The application of these tailored mini-transposon vectors, which could also be used for chromosomal engineering of a wide variety of Gram-negative microorganisms, is demonstrated in the platform environmental bacterium Pseudomonas putida KT2440.

Chassis optimization as a cornerstone for the application of synthetic biology based strategies in microbial secondary metabolism

The increased number of bacterial genome sequencing projects has generated over the last years a large reservoir of genomic information. In silico analysis of this genomic data has renewed the interest in bacterial bioprospecting for bioactive compounds by unveiling novel biosynthetic gene clusters of unknown or uncharacterized metabolites. However, only a small fraction of those metabolites is produced under laboratory-controlled conditions; the remaining clusters represent a pool of novel metabolites that are waiting to be “awaken”. Activation of the biosynthetic gene clusters that present reduced or no expression (known as cryptic or silent clusters) by heterologous expression has emerged as a strategy for the identification and production of novel bioactive molecules. Synthetic biology, with engineering principles at its core, provides an excellent framework for the development of efficient heterologous systems for the expression of biosynthetic gene clusters. However, a common problem in its application is the host-interference problem, i.e., the unpredictable interactions between the device and the host that can hamper the desired output. Although an effort has been made to develop orthogonal devices, the most proficient way to overcome the host-interference problem is through genome simplification. In this review we present an overview on the strategies and tools used in the development of hosts/chassis for the heterologous expression of specialized metabolites biosynthetic gene clusters. Finally, we introduce the concept of specialized host as the next step of development of expression hosts.

Chromosomal integration of transcriptional fusions

The characterization and parameterization of promoters is crucial for the study of gene regulatory networks. While a number of techniques are available for this purpose, the use of reporter fusions integrated in the chromosome of a bacterial host affords precise quantification of transcriptional responses with high reproducibility. Here, we describe the integration of green fluorescent protein (GFP) and lacZ reporter cassettes using either mini-Tn7-based vectors or homologous chromosomal recombination to analyze gene regulation at transcriptional and post-transcriptional levels.

Mining Environmental Plasmids for Synthetic Biology Parts and Devices

The scientific and technical ambition of contemporary synthetic biology is the engineering of biological objects with a degree of predictability comparable to those made through electric and industrial manufacturing. To this end, biological parts with given specifications are sequence-edited, standardized, and combined into devices, which are assembled into complete systems. This goal, however, faces the customary context dependency of biological ingredients and their amenability to mutation. Biological orthogonality (i.e., the ability to run a function in a fashion minimally influenced by the host) is thus a desirable trait in any deeply engineered construct. Promiscuous conjugative plasmids found in environmental bacteria have evolved precisely to autonomously deploy their encoded activities in a variety of hosts, and thus they become excellent sources of basic building blocks for genetic and metabolic circuits. In this article we review a number of such reusable functions that originated in environmental plasmids and keep their properties and functional parameters in a variety of hosts. The properties encoded in the corresponding sequences include inter alia origins of replication, DNA transfer machineries, toxin-antitoxin systems, antibiotic selection markers, site-specific recombinases, effector-dependent transcriptional regulators (with their cognate promoters), and metabolic genes and operons. Several of these sequences have been standardized as BioBricks and/or as components of the SEVA (Standard European Vector Architecture) collection. Such formatting facilitates their physical composability, which is aimed at designing and deploying complex genetic constructs with new-to-nature properties.

Widening functional boundaries of the σ(54) promoter Pu of Pseudomonas putida by defeating extant physiological constraints

The extant layout of the σ(54) promoter Pu, harboured by the catabolic TOL plasmid, pWW0, of Pseudomonas putida is one of the most complex instances of endogenous and exogenous signal integration known in the prokaryotic domain. In this regulatory system, all signal inputs are eventually translated into occupation of the promoter sequence by either of two necessary components: the m-xylene responsive transcriptional factor XylR and the σ(54) containing form of RNA polymerase. Modelling of these components indicated that the Pu promoter could be upgraded to respond with much greater capacity to aromatic inducers by artificially increasing the endogenous levels of both XylR and the σ(54) sigma factor, either separately or together. To explore these scenarios, expression of rpoN, the gene encoding σ(54), was placed under the control of an orthogonal regulatory system that was inducible by salicylic acid. We generated a knock-in P. putida strain containing this construct alongside the xylR/Pu regulatory module in its native configuration, and furthermore, a second strain where xylR expression was under the control of an engineered positive-feedback loop. These interventions allowed us to dramatically increase the transcriptional capacity (i.e. absolute promoter output) of Pu far beyond its natural scope. In addition, they resulted in a new regulatory device displaying more sensitive and ultra-fast responses to m-xylene. To our knowledge, this is the first time that the working regime of a promoter has been rationally modified by releasing the constraints imposed by its innate constituents.

Escherichia coli bioreporters for the detection of 2,4-dinitrotoluene and 2,4,6-trinitrotoluene

The primary explosive found in most land mines, 2,4,6-trinitrotoluene (2,4,6-TNT), is often accompanied by 2,4-dinitrotoluene (2,4-DNT) and 1,3-dinitrobenzene (1,3-DNB) impurities. The latter two compounds, being more volatile, have been reported to slowly leak through land mine covers and permeate the soil under which they are located, thus serving as potential indicators for buried land mines. We report on the construction of genetically engineered Escherichia coli bioreporter strains for the detection of these compounds, based on a genetic fusion between two gene promoters, yqjF and ybiJ, to either the green fluorescent protein gene GFPmut2 or to Photorhabdus luminescens bioluminescence luxCDABE genes. These two gene promoters were identified by exposing to 2,4-DNT a comprehensive library of about 2,000 E. coli reporter strains, each harboring a different E. coli gene promoter controlling a fluorescent protein reporter gene. Both reporter strains detected 2,4-DNT in an aqueous solution as well as in vapor form or when buried in soil. Performance of the yqjF-based sensor was significantly improved in terms of detection threshold, response time, and signal intensity, following two rounds of random mutagenesis in the promoter region. Both yqjF-based and ybiJ-based reporters were also induced by 2,4,6-TNT and 1,3-DNB. It was further demonstrated that both 2,4,6-TNT and 2,4-DNT are metabolized by E. coli and that the actual induction of both yqjF and ybiJ is caused by yet unidentified degradation products. This is the first demonstration of an E. coli whole-cell sensor strain for 2,4-DNT and 2,4,6-TNT, constructed using its own endogenous sensing elements.

The Standard European Vector Architecture (SEVA): a coherent platform for the analysis and deployment of complex prokaryotic phenotypes

The ‘Standard European Vector Architecture’ database (SEVA-DB, http://seva.cnb.csic.es) was conceived as a user-friendly, web-based resource and a material clone repository to assist in the choice of optimal plasmid vectors for de-constructing and re-constructing complex prokaryotic phenotypes. The SEVA-DB adopts simple design concepts that facilitate the swapping of functional modules and the extension of genome engineering options to microorganisms beyond typical laboratory strains. Under the SEVA standard, every DNA portion of the plasmid vectors is minimized, edited for flaws in their sequence and/or functionality, and endowed with physical connectivity through three inter-segment insulators that are flanked by fixed, rare restriction sites. Such a scaffold enables the exchangeability of multiple origins of replication and diverse antibiotic selection markers to shape a frame for their further combination with a large variety of cargo modules that can be used for varied end-applications. The core collection of constructs that are available at the SEVA-DB has been produced as a starting point for the further expansion of the formatted vector platform. We argue that adoption of the SEVA format can become a shortcut to fill the phenomenal gap between the existing power of DNA synthesis and the actual engineering of predictable and efficacious bacteria.

Increasing signal specificity of the TOL network of Pseudomonas putida mt-2 by rewiring the connectivity of the master regulator XylR

Prokaryotic transcription factors (TFs) that bind small xenobiotic molecules (e.g., TFs that drive genes that respond to environmental pollutants) often display a promiscuous effector profile for analogs of the bona fide chemical signals. XylR, the master TF for expression of the m-xylene biodegradation operons encoded in the TOL plasmid pWW0 of Pseudomonas putida, responds not only to the aromatic compound but also, albeit to a lesser extent, to many other aromatic compounds, such as 3-methylbenzylalcohol (3MBA). We have examined whether such a relaxed regulatory scenario can be reshaped into a high-capacity/high-specificity regime by changing the connectivity of this effector-sensing TF within the rest of the circuit rather than modifying XylR structure itself. To this end, the natural negative feedback loop that operates on xylR transcription was modified with a translational attenuator that brings down the response to 3MBA while maintaining the transcriptional output induced by m-xylene (as measured with a luxCDABE reporter system). XylR expression was then subject to a positive feedback loop in which the TF was transcribed from its own target promoters, each known to hold different input/output transfer functions. In the first case (xylR under the strong promoter of the upper TOL operon, Pu), the reporter system displayed an increased transcriptional capacity in the resulting network for both the optimal and the suboptimal XylR effectors. In contrast, when xylR was expressed under the weaker Ps promoter, the resulting circuit unmistakably discriminated m-xylene from 3MBA. The non-natural connectivity engineered in the network resulted both in a higher promoter activity and also in a much-increased signal-to-background ratio. These results indicate that the working regimes of given genetic circuits can be dramatically altered through simple changes in the way upstream transcription factors are self-regulated by positive or negative feedback loops.

It is generally taken for granted that promoters regulated by transcriptional factors (TFs) that respond to small molecules control their specificity to given effectors by tightening or relaxing the intrinsic dual interaction between the TF and the particular inducer. One such promoter is Pu, which drives expression of an operon for the biodegradation of m-xylene by the soil bacterium P. putida mt-2. While XylR, the chief TF of this system, binds this substrate and activates Pu, the same regulator responds, to a lesser extent, to 3-methylbenzylalcohol and thus also activates the promoter. This work provides evidence that such natural effector promiscuity of the system can be altogether suppressed by replacing the naturally occurring negative autoregulation loop that governs XylR expression with an equivalent positive feedback loop. Based on this result, we argue that signal specificity of a given regulatory device depends not only on the TF involved but also on TF connectivity to upstream signals and downstream targets.

A modular cell-based biosensor using engineered genetic logic circuits to detect and integrate multiple environmental signals

Cells perceive a wide variety of cellular and environmental signals, which are often processed combinatorially to generate particular phenotypic responses. Here, we employ both single and mixed cell type populations, pre-programmed with engineered modular cell signalling and sensing circuits, as processing units to detect and integrate multiple environmental signals. Based on an engineered modular genetic AND logic gate, we report the construction of a set of scalable synthetic microbe-based biosensors comprising exchangeable sensory, signal processing and actuation modules. These cellular biosensors were engineered using distinct signalling sensory modules to precisely identify various chemical signals, and combinations thereof, with a quantitative fluorescent output. The genetic logic gate used can function as a biological filter and an amplifier to enhance the sensing selectivity and sensitivity of cell-based biosensors. In particular, an Escherichia coli consortium-based biosensor has been constructed that can detect and integrate three environmental signals (arsenic, mercury and copper ion levels) via either its native two-component signal transduction pathways or synthetic signalling sensors derived from other bacteria in combination with a cell-cell communication module. We demonstrate how a modular cell-based biosensor can be engineered predictably using exchangeable synthetic gene circuit modules to sense and integrate multiple-input signals. This study illustrates some of the key practical design principles required for the future application of these biosensors in broad environmental and healthcare areas.

Degradation of 2,3-dihydroxybenzoate by a novel meta-cleavage pathway

2,3-Dihydroxybenzoate is the precursor in the biosynthesis of several siderophores and an important plant secondary metabolite that, in bacteria, can be degraded via meta-cleavage of the aromatic ring. The dhb cluster of Pseudomonas reinekei MT1 encodes a chimeric meta-cleavage pathway involved in the catabolism of 2,3-dihydroxybenzoate. While the first two enzymes, DhbA and DhbB, are phylogenetically related to those involved in 2,3-dihydroxy-p-cumate degradation, the subsequent steps are catalyzed by enzymes related to those involved in catechol degradation (DhbCDEFGH). Characterization of kinetic properties of DhbA extradiol dioxygenase identified 2,3-dihydroxybenzoate as the preferred substrate. Deletion of the encoding gene impedes growth of P. reinekei MT1 on 2,3-dihydroxybenzoate. DhbA catalyzes 3,4-dioxygenation with 2-hydroxy-3-carboxymuconate as the product, which is then decarboxylated by DhbB to 2-hydroxymuconic semialdehyde. This compound is then subject to dehydrogenation and further degraded to citrate cycle intermediates. Transcriptional analysis revealed genes of the dhB gene cluster to be highly expressed during growth with 2,3-dihydroxybenzoate, whereas a downstream-localized gene encoding 2-hydroxymuconic semialdehyde hydrolase, dispensable for 2,3-dihydroxybenzoate metabolism but crucial for 2,3-dihydroxy-p-cumate degradation, was only marginally expressed. This is the first report describing a gene cluster encoding enzymes for the degradation of 2,3-dihydroxybenzoate.

Engineering whole-cell biosensors with no antibiotic markers for monitoring aromatic compounds in the environment

A cornerstone of Synthetic Biology is the engineering of gene regulatory networks. Construction of such biological circuits has been used not only to elucidate the dynamics of gene expression but also for designing whole-cell biosensors that translate environmental signals into quantifiable outputs. To this end, distinct components of given regulatory systems are rationally rewired in a way that translates an external stimulus (for instance, the presence of one chemical species) into a measurable readout typically fluorescence or luminescence. Various biosensors for BTEX (a mixture of benzene, toluene, ethylbenzene and xylenes) are based on XylR, the main transcriptional regulator of the TOL pathway of Pseudomonas putida mt-2. In the presence of its natural effectors (e.g., m-xylene, toluene or 3-methylbenzylalcohol), XylR triggers expression of the upper pathway genes by means of the Pu promoter. Available biosensors combine the xylR gene and a direct fusion between the cognate Pu promoter and the luxCDABE operon, all components stably integrated in the chromosome of P. putida. A versatile development of the same biosensing concept is described, aimed at increasing the sensitivity of the genetic circuit toward XylR inducers. The new platform utilizes mini-transposon vectors tailored for engineering an artificial expression cascade that operates as an amplifier of the signal/response ratio of the biosensor. This strategy was applied to the construction of a strain that carries a transcriptional fusion between the Pu promoter and T7 RNA polymerase (which becomes under the control of XylR and its effectors), along with a T7 promoter controlling expression of the luxCDABE operon. This simple regulatory architecture produced a dramatic increase of bioluminescence emission in respect to the strain that carries only the direct fusion between the Pu promoter and the luxCDABE reporter.

Random and cyclical deletion of large DNA segments in the genome of Pseudomonas putida

Cumulative site-directed mutagenesis is of limited suitability for the global analysis of the gene functions in the microbe's cellular network. In order to simplify and stabilize the genome of the soil bacterium Pseudomonas putida, we developed a recyclable three-step excision method based on the combination of customized mini-transposons and the FLP-FRT site-specific recombination system. To demonstrate the powerful potential of these tools, we first established insertion mutant libraries that allow users to study gene functions with respect either to phenotypic characteristics (single insertions) or to their involvement in predicted networks (double insertions). Based on these libraries, we generated as a proof-of-principle, single-deletion mutants lacking ∼ 4.1% of the genome (∼ 3.7% of the gene repertoire). A cyclical application of the method generated four double-deletion mutants of which a maximum of ∼ 7.4% of the chromosome (∼ 6.9% of the gene count) was excised. This procedure demonstrates a new strategy for rapid genome streamlining and gain of new insights into the molecular interactions and regulations.

Streamlining of a Pseudomonas putida genome using a combinatorial deletion method based on minitransposon insertion and the Flp-FRT recombination system

Here, we document a technique to reduce the size of the genome of Pseudomonas putida by using a combinatorial mini-Tn5-targeted Flp-FRT recombination system. This method combines random insertions with the site-specific Flp-FRT recombination system to generate successive random deletions in a single strain in which parts of the genome are excised via the action of the cognate flippase. For this purpose, we have generated two mini-Tn5 transposon mutant libraries with single and double integrations of either mini-Tn5 KpF alone or mini-Tn5 KpF in parallel with mini-Tn5 TF, respectively. These mini-Tn5 transposons carry different selectable markers and each has an FRT (Flippase Recognition Target) site. Mapping of the position of both mini-Tn5 transposons in the chromosome of P. putida was conducted by Arbitrary Primed-PCR (AP-PCR). Subsequent sequencing of the PCR fragments led to the identification of the coordinates of the transposons and the orientation of both FRT sites. Under specific laboratory conditions, both FRT sites were recognized by the flippase, and the deletion of a nonessential intervening genomic segment along with the transposon backbones occurred without inheritance of any marker genes.

Protein and RNA engineering to customize microbial molecular reporting

Nature takes advantage of the malleability of protein and RNA sequence and structure to employ these macromolecules as molecular reporters whose conformation and functional roles depend on the presence of a specific ligand (an "effector" molecule). By following nature's example, ligand-responsive proteins and RNA molecules are now routinely engineered and incorporated into customized molecular reporting systems (biosensors). Microbial small-molecule biosensors and endogenous molecular reporters based on these sensing components find a variety of applications that include high-throughput screening of biosynthesis libraries, environmental monitoring, and novel gene regulation in synthetic biology. Here, we review recent advances in engineering small-molecule recognition by proteins and RNA and in coupling in vivo ligand binding to reporter-gene expression or to allosteric activation of a protein conferring a detectable phenotype. Emphasis is placed on microbial screening systems that serve as molecular reporters and facilitate engineering the ligand-binding component to recognize new molecules.

Association of dnt genes of Burkholderia sp. DNT with the substrate-blind regulator DntR draws the evolutionary itinerary of 2,4-dinitrotoluene biodegradation

The regulation of the DNT pathway for biodegradation of 2,4-dinitrotoluene of Burkholderia sp. DNT has been examined by exporting each of its components to Pseudomonas putida KT2440. The cognate regulator DntR does not respond to the pathway substrate, but to the non-substrate salicylate. In order to examine whether such a response to an unrelated inducer was specific or rather a vestige of a previous evolutionary stage, the complete dnt complement or parts of it were expressed functionally for accumulation of various metabolic intermediates. Their effect on expression of dnt genes was then followed both biochemically and by means of a luminescent reporter engineered in the surrogate host. DntR was not only unresponsive to DNT biodegradation products, but it also failed to influence expression of dnt genes at all. Comparison of the dntR/dntA divergent promoter region with similar ones found in various catabolic systems indicated that the leading segment of the DNT biodegradation pathway evolved from a matching portion of naphthalene biodegradation routes existing in other bacteria. That a useless but still active transcriptional factor occurs along enzymes that have already evolved a new substrate specificity suggests that emergence of novel catalytic abilities precedes their submission to cognate regulatory devices, not vice versa.

Evolution of catabolic pathways and their regulatory systems in synthetic nitroaromatic compounds degrading bacteria

Evolution of catabolic pathways for the degradation of synthetic nitroaromatic compounds is currently ongoing process because these compounds have been in nature only for a short time. Bacteria isolated from contaminated areas contain pathways for the degradation of nitroaromatic compounds at different stages of progression. Therefore, the emergence of pathways for the degradation of such chemicals provides a good opportunity to investigate evolutionary processes leading to the emergence of new metabolic routes and their regulatory systems. In Burkholderia sp. strain DNT the regulatory gene encoding the LysR-type transcriptional regulator DntR is placed divergently of the dinitrotoluene (DNT) dioxygenase genes. This regulator still recognizes salicylate, an effector of its NagR-like ancestor but not DNT. In this issue of Molecular Microbiology, de las Heras et al. demonstrate that the DntR does not respond to any metabolic intermediates of the DNT catabolic pathway. The results of this study suggest that the catabolic pathway for the degradation of DNT has reached to an early stage of evolution when novel specificities of the catabolic enzymes have already acquired but the cognate regulatory system is still missing. This research addresses some fundamental questions about bottlenecks to be solved during evolution of new catabolic operons.

Synthetic toxicology: where engineering meets biology and toxicology

This article examines the implications of synthetic biology (SB) for toxicological sciences. Starting with a working definition of SB, we describe its current subfields, namely, DNA synthesis, the engineering of DNA-based biological circuits, minimal genome research, attempts to construct protocells and synthetic cells, and efforts to diversify the biochemistry of life through xenobiology. Based on the most important techniques, tools, and expected applications in SB, we describe the ramifications of SB for toxicology under the label of synthetic toxicology. We differentiate between cases where SB offers opportunities for toxicology and where SB poses challenges for toxicology. Among the opportunities, we identified the assistance of SB to construct novel toxicity testing platforms, define new toxicity-pathway assays, explore the potential of SB to improve in vivo biotransformation of toxins, present novel biosensors developed by SB for environmental toxicology, discuss cell-free protein synthesis of toxins, reflect on the contribution to toxic use reduction, and the democratization of toxicology through do-it-yourself biology. Among the identified challenges for toxicology, we identify synthetic toxins and novel xenobiotics, biosecurity and dual-use considerations, the potential bridging of toxic substances and infectious agents, and do-it-yourself toxin production.

Xenobiology: a new form of life as the ultimate biosafety tool

Synthetic biologists try to engineer useful biological systems that do not exist in nature. One of their goals is to design an orthogonal chromosome different from DNA and RNA, termed XNA for xeno nucleic acids. XNA exhibits a variety of structural chemical changes relative to its natural counterparts. These changes make this novel information-storing biopolymer "invisible" to natural biological systems. The lack of cognition to the natural world, however, is seen as an opportunity to implement a genetic firewall that impedes exchange of genetic information with the natural world, which means it could be the ultimate biosafety tool. Here I discuss, why it is necessary to go ahead designing xenobiological systems like XNA and its XNA binding proteins; what the biosafety specifications should look like for this genetic enclave; which steps should be carried out to boot up the first XNA life form; and what it means for the society at large.

Modified 3-oxoadipate pathway for the biodegradation of methylaromatics in Pseudomonas reinekei MT1

Catechols are central intermediates in the metabolism of aromatic compounds. Degradation of 4-methylcatechol via intradiol cleavage usually leads to the formation of 4-methylmuconolactone (4-ML) as a dead-end metabolite. Only a few microorganisms are known to mineralize 4-ML. The mml gene cluster of Pseudomonas reinekei MT1, which encodes enzymes involved in the metabolism of 4-ML, is shown here to encode 10 genes found in a 9.4-kb chromosomal region. Reverse transcription assays revealed that these genes form a single operon, where their expression is controlled by two promoters. Promoter fusion assays identified 4-methyl-3-oxoadipate as an inducer. Mineralization of 4-ML is initiated by the 4-methylmuconolactone methylisomerase encoded by mmlI. This reaction produces 3-ML and is followed by a rearrangement of the double bond catalyzed by the methylmuconolactone isomerase encoded by mmlJ. Deletion of mmlL, encoding a protein of the metallo-beta-lactamase superfamily, resulted in a loss of the capability of the strain MT1 to open the lactone ring, suggesting its function as a 4-methyl-3-oxoadipate enol-lactone hydrolase. Further metabolism can be assumed to occur by analogy with reactions known from the 3-oxoadipate pathway. mmlF and mmlG probably encode a 4-methyl-3-oxoadipyl-coenzyme A (CoA) transferase, and the mmlC gene product functions as a thiolase, transforming 4-methyl-3-oxoadipyl-CoA into methylsuccinyl-CoA and acetyl-CoA, as indicated by the accumulation of 4-methyl-3-oxoadipate in the respective deletion mutant. Accumulation of methylsuccinate by an mmlK deletion mutant indicates that the encoded acetyl-CoA hydrolase/transferase is crucial for channeling methylsuccinate into the central metabolism.