Analysis and quantification of parabens in cosmetic products by utilizing hollow fibre-supported liquid membrane and high performance liquid chromatography with ultraviolet detection

Factorial Design Optimisation of Solid Phase Extraction for Preconcentration of Parabens in Wastewater Using Ultra-High Performance Liquid Chromatography Triple Quadrupole Mass Spectrometry

Background:

Parabens are synthetic esters used extensively as preservatives and/or bactericides in personal care personal products.

Objective:

Development and validation of a novel robust chemometric assisted analytical technique with superior analytical performances for the determination of ethylparaben, methylparaben and propylparaben, using simulated wastewater matrix.

Methods:

An automated Solid Phase Extraction (SPE) method coupled with liquid chromatographymass spectrometry was applied in this study. A gradient elution programme comprising of 0.1% formic acid in deionised water (A) and 0.1% formic acid in Methanol (B) was employed on a 100 x 2.1 mm, 3.0 μm a particle size biphenyl column. Two-level (2k) full factorial design coupled with response surface methodology was used for optimisation and investigation of SPE experimental variables that had the most significant outcome of the analytical response.

Results:

According to the analysis of variance (ANOVA), sample pH and eluent volume were statistically the most significant parameters. The method developed was validated for accuracy, precision, Limits of Detection (LOD) and Limit of Quantification (LOQ) and linearity. The LOD and LOQ established under those optimised conditions varied between 0.04-0.12 μgL−1 and 0.14-0.40 μgL−1 respectively. The use of matrix-matched external calibration provided extraction recoveries between 78-128% with relative standard deviations at 2-11% for two spike levels (10 and 100 μgL-1) in three different water matrices (simulated wastewater, influent and effluent water).

Conclusion:

The newly developed method was applied successfully to the analyses of parabens in wastewater samples at different sampling points of a wastewater treatment plant, revealing concentrations of up to 3 μgL−1.

A review of semi-volatile organic compounds (SVOCs) in the indoor environment: occurrence in consumer products, indoor air and dust

As many people spend a large part of their life indoors, the quality of the indoor environment is important. Data on contaminants such as flame retardants, pesticides and plasticizers are available for indoor air and dust but are scarce for consumer products such as computers, televisions, furniture, carpets, etc. This review presents information on semi-volatile organic compounds (SVOCs) in consumer products in an attempt to link the information available for chemicals in indoor air and dust with their indoor sources. A number of 256 papers were selected and divided among SVOCs found in consumer products (n = 57), indoor dust (n = 104) and air (n = 95). Concentrations of SVOCs in consumer products, indoor dust and air are reported (e.g. PFASs max: 13.9 μg/g in textiles, 5.8 μg/kg in building materials, 121 ng/g in house dust and 6.4 ng/m³ in indoor air). Most of the studies show common aims, such as human exposure and risk assessment. The main micro-environments investigated (houses, offices and schools) reflect the relevance of indoor air quality. Most of the studies show a lack of data on concentrations of chemicals in consumer goods and often only the presence of chemicals is reported. At the moment this is the largest obstacle linking chemicals in products to chemicals detected in indoor air and dust.

Sensitive Synchronous Spectrofluorimetric Study of Certain Sunscreens Using Fluorescence Enhancers in Cosmeceutical Formulations

Synchronous spectrofluorimetric methods could be successfully adopted for simultaneous determination of Octinoxate (OMC), Avobenzone (AVO), Octyltriazone (OT), and Phenyl benzimidazole sulfonic acid (PBSA) in moisturizing sunscreen lotion, utilizing β-CD as fluorescence enhancer, and determination of Avobenzone (AVO), Homosalate, Tinosorb M and Phenyl benzimidazole sulfonic acid (PBSA) in presence of Octocrylene (OCR) in whitening sunscreen cream, using micellar medium of Sodium Dodecyl Sulfate (SDS) to enhance fluorescence intensity. For first product, zero order synchronous spectrofluorimetric method was used for determination of OMC and AVO, and derivative synchronous spectrofluorimetric technique was utilized for OT and PBSA in quaternary mixture. Linear calibration curves were obtained in a concentration range of 0.5-8 μg mL^- 1 for OMC and AVO, and in range of 0.05-3 μg mL^- 1 for OT and 0.001-5 μg mL^- 1 for PBSA, by measuring the fluorescence at 370, 405, 333.2 and 340.6 nm, respectively. For second product, first derivative synchronous fluorescence method was used for each UV-filter. A linear calibration curves were obtained in a concentration range of 0.5-8 μg mL^- 1 for AVO, in range of 0.1-8 μg mL^- 1 for Homosalate, 2-10 μg mL^- 1 for Tinosorb M and 0.001-5 μg mL^- 1 for PBSA, by measuring the fluorescence at 409.8, 373, 307.2 and 316.8 nm, respectively. The detection limits are well below the maximum admissible concentration. The proposed methods were validated according to ICH guidelines and successfully applied to determine sunscreens in pure form and in Cosmeceutical formulations. All the results obtained were compared with those of published methods, where no significant difference was observed.