Physiologic Benefits of Pulsatile Perfusion During Mechanical Circulatory Support for the Treatment of Acute and Chronic Heart Failure in Adults

A sensorless, physiologic feedback control strategy to increase vascular pulsatility for rotary blood pumps

Continuous flow rotary blood pumps (RBP) operating clinically at constant rotational speeds cannot match cardiac demand during varying physical activities, are susceptible to suction, diminish vascular pulsatility, and have an increased risk of adverse events. A sensorless, physiologic feedback control strategy for RBP was developed to mitigate these limitations. The proposed algorithm used intrinsic pump speed to obtain differential pump speed (ΔRPM). The proposed gain-scheduled proportional-integral controller, switching of setpoints between a higher pump speed differential setpoint (ΔRPM Hr ) and a lower pump speed differential setpoint (ΔRPM Lr ), generated pulsatility and physiologic perfusion, while avoiding suction. The switching between ΔRPM Hr and ΔRPM Lr setpoints occurred when the measured ΔRPM reached the pump differential reference setpoint. In-silico tests were implemented to assess the proposed algorithm during rest, exercise, a rapid 3-fold pulmonary vascular resistance increase, rapid change from exercise to rest, and compared with maintaining a constant pump speed setpoint. The proposed control algorithm augmented aortic pressure pulsatility to over 35 mmHg during rest and around 30 mmHg during exercise. Significantly, ventricular suction was avoided, and adequate cardiac output was maintained under all simulated conditions. The performance of the sensorless algorithm using estimation was similar to the performance of sensor-based method. This study demonstrated that augmentation of vascular pulsatility was feasible while avoiding ventricular suction and providing physiological pump outflows. Augmentation of vascular pulsatility can minimize adverse events that have been associated with diminished pulsatility. Mock circulation and animal studies would be conducted to validate these results.

Modifying the ICP pulse wave: effects on parenchymal blood flow pulsatility

Pulsation of the cerebral blood flow (CBF) produces intercranial pressure (ICP) waves. The aim of this study is to determine whether externally modifying ICP pulsatility alters parenchymal blood flow pulsatility. A cardiac-gated inflatable device was inserted in the lateral epidural space of 12 anesthetized canines (canis familiaris) and used to cause reduction, inversion, and augmentation of the ICP pulse. CBF in each hemisphere was measured using laser Doppler velocimetry. A significant increase in both mean CBF and its amplitude was observed for reduction as well as inversion of the ICP pulse, with larger changes observed for the inversion protocol. Significant increases in the mean CBF were also observed ipsilaterally for the augmentation protocol together with indications of reduced CBF amplitude contralaterally. External alteration of the ICP pulse thus caused significant changes in parenchymal blood flow pulsatility. The inverse relationship between the ICP and CBF amplitude suggests that the changes did not occur via modification of the intracranial Windkessel mechanism. Thus, the effects likely occurred in the low-pressure vessels, i.e., capillaries and/or venules, rather than the high-pressure arteries. Future MRI studies are however required to map and quantify the effects on global cerebral blood flow.NEW & NOTEWORTHY This study demonstrated that external modification of ICP pulsatility, using a cardiac-gated inflatable device implanted epidurally in canines, alters brain tissue blood flow pulsatility. Specifically, decreasing systolic ICP increased blood flow pulsatility in brain tissue. The results suggest that the altered CBF pulsatility is unlikely to depend on modification of the Windkessel effect on the feeding arterial system but was rather an effect directly on tissue and the lower pressure distal vessels.

Role of animal models in biomedical research: a review

The animal model deals with the species other than the human, as it can imitate the disease progression, its’ diagnosis as well as a treatment similar to human. Discovery of a drug and/or component, equipment, their toxicological studies, dose, side effects are in vivo studied for future use in humans considering its’ ethical issues. Here lies the importance of the animal model for its enormous use in biomedical research. Animal models have many facets that mimic various disease conditions in humans like systemic autoimmune diseases, rheumatoid arthritis, epilepsy, Alzheimer’s disease, cardiovascular diseases, Atherosclerosis, diabetes, etc., and many more. Besides, the model has tremendous importance in drug development, development of medical devices, tissue engineering, wound healing, and bone and cartilage regeneration studies, as a model in vascular surgeries as well as the model for vertebral disc regeneration surgery. Though, all the models have some advantages as well as challenges, but, present review has emphasized the importance of various small and large animal models in pharmaceutical drug development, transgenic animal models, models for medical device developments, studies for various human diseases, bone and cartilage regeneration model, diabetic and burn wound model as well as surgical models like vascular surgeries and surgeries for intervertebral disc degeneration considering all the ethical issues of that specific animal model. Despite, the process of using the animal model has facilitated researchers to carry out the researches that would have been impossible to accomplish in human considering the ethical prohibitions.

Concept and Design of a Novel Pulsatile Left Heart Assist Device-The PERKAT Left Ventricle System

Cardiogenic shock is associated with high mortality. Patients often require temporary mechanical circulatory support. We aimed to develop a percutaneously implantable, assist device that unloads the left ventricle (LV) in a pulsatile way. The PERkutane KATheter pump technologie (PERKAT LV) device consists of a nitinol pump chamber, which is covered by foils carrying outflow valves. A flexible tube with a pigtail-shaped tip and inflow holes represents the distal part of the pump. The system is designed for 16F percutaneous implantation. The nitinol chamber is placed in the descending aorta while the flexible tube bypasses aortic arch and ascending aorta with its tip in the LV. An intra-aortic balloon pump is placed into the chamber and connected to a console. Balloon deflation generates a blood flow from the LV into the pump chamber. During balloon inflation, blood leaves the system through the outflow foil valves in the descending aorta. Under different afterload settings using a 30 cc intra-aortic balloon pump and varying inflation/deflations rates, we recorded flow rates up to 3.0 L/min. Based on this, we believe that PERKAT LV is a promising approach for temporary LV support. The proposed design and its excellent performance give basis for in vivo tests in an animal model.

Efficacy and safety of ECG-synchronized pulsatile extracorporeal membrane oxygenation in the clinical setting: The SynCor Trial

INTRODUCTION

Mechanical circulatory support (MCS) devices are increasingly used as a treatment option in resuscitation or in patients with cardiogenic shock (CS). Prophylactic implantation in high-risk percutaneous coronary interventions (HRPCI) is another upcoming indication. The i-cor ECG-synchronized cardiac assist device combines the hemodynamic support of a veno-arterial extracorporeal membrane oxygenation (VA-ECMO) with the ability to generate a pulsatile flow and thus decreasing adverse effects of VA-ECMO on myocardial function. Aim of this study was to obtain data concerning feasibility, safety and outcomes in both indications.

METHODS

A total of 47 patients (34 HRPCI, 13 CS) were included in nine German centers and participated in this study. Demographic and clinical parameters, procedural as well as follow-up data were prospectively recorded and analyzed.

RESULTS

Device implantation and initiation of ECG-synchronized cardiac assist was technical successful in all cases and no failures of the consoles or disposable parts were observed. Furthermore, intended percutaneous coronary interventions and successful weaning from cardiac assist was achieved in 97.1% of HRPCI patients. We observed a 30d-survival of 94.1% in the HRPCI group and 69.2% in the CS group. Main complications in both groups were bleeding events (14.7% HRPCI, 23.1% CS) and critical limb ischemia (2.9% HRPCI, 38.5% CS).

CONCLUSION

The i-cor ECG-synchronized cardiac assist device appears safe and feasible showing clinical outcomes comparable to existing data in the setting of high-risk percutaneous coronary interventions and acute cardiogenic shock. Further prospective trials are warranted to identify optimal patient and interventional characteristics that will benefit most of this novel kind of mechanical circulatory support.

Designing an Active Valvulated Outflow Conduit for a Continuous-Flow Left Ventricular Assist Device to Increase Pulsatility: A Simulation Study

The purpose of this work was to investigate, using a lumped parameter model, the feasibility of increasing the pulsatility of a continuous-flow ventricular assist device (VAD) by implanting an active valvulated outflow cannula. A lumped parameter model was adopted for this study. VAD was modeled, starting from its pressure-flow characteristics. The valvulated outflow conduit was modeled as an active resistance described by a square function. Starting from pathologic condition, the following simulations were performed: VAD, VAD and valvulated outflow conduit in copulsation and counterpulsation with different ratios between the VAD valve opening rate and the heart rate, and asynchrony work with the heart with different VAD valve opening intervals. The copulsation 1:1 configuration and the asynchrony 0.3s-close-0.7s-open configurations permit to maximize the hemodynamic benefits provided by the presence of the active VAD outflow valvulated conduit providing an increase of arterial pulsatility from 1.86% to 14.98% without the presence of left ventricular output. The presence of the active VAD valve in the outflow conduit causes a decrement of the left ventricular unloading and of VAD flow and, that can be counteracted by increasing the VAD speed without affecting arterial pulsatility. The valvulated outflow tube provides an increase in arterial pulsatility; it can be driven in different working modality and can be potentially applicable to all types of VADs. However, the valvulated outflow conduit causes a decrement of left ventricular unloading and of the VAD flow that can be counteracted, increasing the VAD speed.

How well do we understand pulsatility in the context of modern ventricular assist devices?

BACKGROUND

Modern ventricular assist devices (VADs) use a continuous flow design. It has been suggested that a lack of pulsatility contributes to a range of adverse outcomes including pump thrombus, gastrointestinal bleeding and stroke. To better assess the role of pulsatility in these adverse events, we first require a clear definition of 'pulsatility' in the setting of a severely impaired ventricle and a modern continuous flow VAD.

METHODS

A literature review was conducted to elucidate the understanding of pulsatility in modern VAD literature. Search engines used included PUBMED, EMBASE and the Cochrane library. Articles were appraised on three aspects: Whether they mentioned pulsatility; whether they mentioned which pulsatility measure was used and finally which methodology was used to obtain the value.

RESULTS

Of 354 articles reviewed, only 13 met our broad inclusion criteria. Of these articles, the most cited measure was pulsatility index (PI) - used by 11 of the publications. The methodology used to obtain the value was not uniform and five articles did not clearly state it. Other measures included pulse pressure and surplus haemodynamic energy. The majority of articles did not directly discuss pulsatility in the setting of patient-pump interaction.

CONCLUSION

Most publications did not provide a definition for pulsatility. In those that did, the most common measure was PI. Measuring PI was not standardised. Few papers addressed the impact of intrinsic ventricular function and arterial compliance on pulsatility. We suggest that future publications adopt a uniform definition which encompasses both patient and pump characteristics.

Increasing the pulsatility of continuos flow VAD: comparison between a valvulated outflow cannula and speed modulation by simulation

To investigate by a lumped parameter model the feasibility of increasing the pulsatility of a continuous flow VAD, implanting an active valvulated outflow cannula and to compare the results with the haemodynamic outcome given by speed modulation methods. The concomitant presence of speed modulation and the active valvulated outflow conduit is also simulated. A lumped parameter model was adopted. VAD was modeled starting from its pressure flow characteristics with a second order polynomial equation. The valvulated outflow conduit was modeled as an active resistance described by a square function. Starting from pathological condition we simulated: VAD; VAD and valvulated outflow conduit in copulsation, counterpulsation and asynchrony work with the heart; VAD and active valvulated outflow tube and speed modulation. Copulsation 1:1 and asynchrony 0.3 s valve close-0.7 s valve open configurations maximised the haemodynamic benefits with the highest increment in pulsatility. The valvulated outflow conduit causes a decrement of the left ventricular unloading and of VAD flow that can be counteracted by increasing the VAD speed without affecting pulsatility. The concomitant use of the speed modulation and the active valvulated outflow conduit can further increase the pulsatility without altering left ventricular unloading and VAD flow. The valvulated outflow tube provide similar increase in pulsatility to speed modulation method but causes a decrement of left ventricular unloading and VAD flow that can be counteracted increasing the VAD speed or allowing a partial support. A valvulated outflow tube can be potentially applied to all continuous flow VADs.

Effects of Pulsatile Frequency of Left Ventricular Assist Device (LVAD) on Coronary Perfusion: A Numerical Simulation Study

Background

Left ventricular assist devices (LVADs) with counter-pulsation mode have been widely used to support left ventricular function and improve coronary circulation. However, the frequency characteristics of the coronary system have not been considered. The aim of this study was to investigate the effects of pulsatile frequency of LVADs on coronary perfusion.

Material/Methods

First, a lumped parameter (LP) model incorporating coronary circulation, systemic circulation, left heart, and LVAD was established to simulate the cardiovascular system. Then, the frequency characteristics of the coronary system were analyzed and the calculation results showed that the pulsatile frequency of the LVAD has a substantial effect on coronary blood flow. To verify the accuracy of the theoretical analysis, the hemodynamic effects of the LVAD on the coronary artery were compared under 4 support modes: co-pulsation mode, and counter-pulsation modes in synchronization ratios of 1: 1, 2: 1, and 3: 1.

Results

We found that the coronary flow increased by 5% when the working mode changed from co-pulsation to counter-pulsation in a synchronization ratio of 1: 1, and by an additional 6% when the working mode changed from counter-pulsation in a synchronization ratio of 1: 1 to counter-pulsation in a synchronization ratio of 3: 1.

Conclusions

This work provides a useful method to increase coronary perfusion and may be beneficial for improving myocardial function in patients with end-stage heart failure, especially those with ischemic cardiomyopathy (ICM).

Haemodynamic evaluation of the new pulsatile-flow generation method in vitro

Continuous-flow ventricular-assist devices are widely used to support patients with advanced heart failure, because continuous-flow ventricular-assist devices are more durable, have smaller sizes and have better survival rates for patients compared to the pulsatile-flow ventricular-assist devices. Nevertheless, continuous-flow ventricular-assist devices often cause complications such as gastrointestinal bleeding, haemorrhagic stroke, and aortic insufficiency and have a negative impact on the microcirculation for both long-time implantable and short-time extracorporeal systems. The aim of this study is the evaluation of the pulsatile-flow generation method in continuous-flow ventricular-assist device without pump speed changes. The method may be used for short-time extracorporeal continuous-flow mechanical circulatory support and long-time implantable mechanical circulatory support. A shunt with a controlled adjustable valve, that clamps periodically, is connected in parallel to the continuous-flow ventricular-assist device. We compared the continuous-flow ventricular-assist device operating with and without the shunt on the mock circulation loop. The continuous-flow ventricular-assist device-shunt system was connected according to the left ventricle-aorta circuit and worked in phase with the ventricle. Heart failure was simulated on the mock circulation circuit. Rotaflow (Maquet Inc.) was used as the continuous-flow pump. Haemolysis studies of the system for generating a pulse flow were carried out at a flow rate of 5 L/min and a pressure drop of 100 mm Hg. To compare the haemodynamic efficiency, we used the aortic pulsation index I_p, the equivalent energy pressure and the surplus haemodynamic energy. These indexes were higher in the pulsatile mode (I_p - 4 times, equivalent energy pressure by 7.36% and surplus haemodynamic energy - 10 times), while haemolysis was the same. The normalised index of haemolysis was 0.0015 ± 0.001. The results demonstrate the efficiency of the pulsatile-flow generation method for continuous-flow ventricular-assist devices without impeller rotation rate changes.

Hurdles to Cardioprotection in the Critically Ill

Cardiovascular disease is the largest contributor to worldwide mortality, and the deleterious impact of heart failure (HF) is projected to grow exponentially in the future. As heart transplantation (HTx) is the only effective treatment for end-stage HF, development of mechanical circulatory support (MCS) technology has unveiled additional therapeutic options for refractory cardiac disease. Unfortunately, despite both MCS and HTx being quintessential treatments for significant cardiac impairment, associated morbidity and mortality remain high. MCS technology continues to evolve, but is associated with numerous disturbances to cardiac function (e.g., oxidative damage, arrhythmias). Following MCS intervention, HTx is frequently the destination option for survival of critically ill cardiac patients. While effective, donor hearts are scarce, thus limiting HTx to few qualifying patients, and HTx remains correlated with substantial post-HTx complications. While MCS and HTx are vital to survival of critically ill cardiac patients, cardioprotective strategies to improve outcomes from these treatments are highly desirable. Accordingly, this review summarizes the current status of MCS and HTx in the clinic, and the associated cardiac complications inherent to these treatments. Furthermore, we detail current research being undertaken to improve cardiac outcomes following MCS/HTx, and important considerations for reducing the significant morbidity and mortality associated with these necessary treatment strategies.

Left ventricular assist device-induced reverse remodeling: it's not just about myocardial recovery

INTRODUCTION

The abnormal structure, function and molecular makeup of dilated cardiomyopathic hearts can be partially normalized in patients supported by a left ventricular assist device (LVAD), a process called reverse remodeling. This leads to recovery of function in many patients, though the rate of full recovery is low and in many cases is temporary, leading to the concept of heart failure remission, rather than recovery. Areas covered: We summarize data indicative of ventricular reverse remodeling, recovery and remission during LVAD support. These terms were used in searches performed in Pubmed. Duplication of topics covered in depth in prior review articles were avoided. Expert commentary: Although most patients undergoing mechanical circulatory support (MCS) show a significant degree of reverse remodeling, very few exhibit sufficiently improved function to justify device explantation, and many from whom LVADs have been explanted have relapsed back to the original heart failure phenotype. Future research has the potential to clarify the ideal combination of pharmacological, cell, gene, and mechanical therapies that would maximize recovery of function which has the potential to improve exercise tolerance of patients while on support, and to achieve a higher degree of myocardial recovery that is more likely to persist after device removal.

Arterial pulsatility under phasic left ventricular assist device support

The aim of this study is to understand whether the phasic Continuous Flow Left Ventricular Assist Device (CF-LVAD) support would increase the arterial pulsatility. A Micromed DeBakey CF-LVAD was used to apply phasic support in an ex-vivo experimental platform. CF-LVAD was operated over a cardiac cycle by phase-shifting the pulsatile pump control with respect to the heart cycle, in 0.05 s increments in each experiment. The pump flow rate was selected as the control variable and a reference model was used to operate the CF-LVAD at a pulsatile speed. Arterial pulse pressure was the highest (9 mmHg) when the peak pump flow is applied at the peak systole under varying speed CF-LVAD support over a cardiac cycle while it was the lowest (2 mmHg) when the peak pump flow was applied in the diastolic phase. The mean arterial pressure and mean CF-LVAD output were the same in each experiment while arterial pulse pressure and pulsatility index varied depending on the phase of reference pump flow rate signal. CF-LVAD speed should be synchronized considering the timing of peak systole over a cardiac cycle to increase the arterial pulsatility. Moreover, it is possible to decrease the arterial pulsatility under counter-pulsating CF-LVAD support.

Enhancement of Arterial Pressure Pulsatility by Controlling Continuous-Flow Left Ventricular Assist Device Flow Rate in Mock Circulatory System

Continuous-flow left ventricular assist devices (CF-LVADs) generally operate at a constant speed, which reduces pulsatility in the arteries and may lead to complications such as functional changes in the vascular system, gastrointestinal bleeding, or both. The purpose of this study is to increase the arterial pulse pressure and pulsatility by controlling the CF-LVAD flow rate. A MicroMed DeBakey pump was used as the CF-LVAD. A model simulating the flow rate through the aortic valve was used as a reference model to drive the pump. A mock circulation containing two synchronized servomotor-operated piston pumps acting as left and right ventricles was used as a circulatory system. Proportional-integral control was used as the control method. First, the CF-LVAD was operated at a constant speed. With pulsatile-speed CF-LVAD assistance, the pump was driven such that the same mean pump output was generated. Continuous and pulsatile-speed CF-LVAD assistance provided the same mean arterial pressure and flow rate, while the index of pulsatility increased significantly for both arterial pressure and pump flow rate signals under pulsatile speed pump support. This study shows the possibility of improving the pulsatility of CF-LVAD support by regulating pump speed over a cardiac cycle without reducing the overall level of support.

Pumping Rate Study of a Left Ventricular Assist Device in a Mock Circulatory System

The aim of this work was to investigate the hemodynamic influence of the change of pump rate on the cardiovascular system with consideration of heart rate and the resonant characteristics of the arterial system when a reliable synchronous triggering source is unavailable. Hemodynamic waveforms are recorded at baseline conditions and with the pump rate of left ventricular assist device (LVAD) at 55, 60, 66, and 70 beats per minute for four test conditions in a mock circulatory system. The total input work (TIW) and energy equivalent pressure (EEP) are calculated as metrics for evaluating the hemodynamic performance within different test conditions. Experimental results show that TIW and EEP achieve their maximum values, where the pump rate is equal to the heart rate. In addition, it demonstrates that TIW and EEP are significantly affected by changing pump rate of LVAD, especially when the pump rate is closing to the natural frequency of the arterial system. When a reliable synchronous triggering source is not available for LVAD, it is suggested that selecting a pump rate equal to the resonant frequency of the arterial system could achieve better supporting effects.

Venovenous Extracorporeal Life Support in Single-Ventricle Patients with Acute Respiratory Distress Syndrome

There is new and growing experience with venovenous extracorporeal life support (VV ECLS) for neonatal and pediatric patients with single-ventricle physiology and acute respiratory distress syndrome (ARDS). Outcomes in this population have been defined but could be improved; survival rates in single-ventricle patients on VV ECLS for respiratory failure are slightly higher than those in single-ventricle patients on venoarterial ECLS for cardiac failure (48 vs. 32-43%), but are lower than in patients with biventricular anatomy (58-74%). To that end, special consideration is necessary for patients with single-ventricle physiology who require VV ECLS for ARDS. Specifically, ARDS disrupts the balance between pulmonary and systemic blood flow through dynamic alterations in cardiopulmonary mechanics. This complexity impacts how to run the VV ECLS circuit and the transition back to conventional support. Furthermore, these patients have a complicated coagulation profile. Both venous and arterial thrombi carry marked risk in single-ventricle patients due to the vulnerability of the pulmonary, coronary, and cerebral circulations. Finally, single-ventricle palliation requires the preservation of low resistance across the pulmonary circulation, unobstructed venous return, and optimal cardiac performance including valve function. As such, the proper timing as well as the particular conduct of ECLS might differ between this population and patients without single-ventricle physiology. The goal of this review is to summarize the current state of knowledge of VV ECLS in the single-ventricle population in the context of these special considerations.

Effect of the Pulsatile Extracorporeal Membrane Oxygenation on Hemodynamic Energy and Systemic Microcirculation in a Piglet Model of Acute Cardiac Failure

The objective of this study was to compare the effects of pulsatile and nonpulsatile extracorporeal membrane oxygenation (ECMO) on hemodynamic energy and systemic microcirculation in an acute cardiac failure model in piglets. Fourteen piglets with a mean body weight of 6.08 ± 0.86 kg were divided into pulsatile (N = 7) and nonpulsatile (N = 7) ECMO groups. The experimental ECMO circuit consisted of a centrifugal pump, a membrane oxygenator, and a pneumatic pulsatile flow generator system developed in-house. Nonpulsatile ECMO was initiated at a flow rate of 140 mL/kg/min for the first 30 min with normal heart beating, with rectal temperature maintained at 36°C. Ventricular fibrillation was then induced with a 3.5-V alternating current to generate a cardiac dysfunction model. Using this model, we collected the data on pulsatile and nonpulsatile groups. The piglets were weaned off ECMO at the end of the experiment (180 min after ECMO was initiated). The animals did not receive blood transfusions, inotropic drugs, or vasoactive drugs. Blood samples were collected to measure hemoglobin, methemoglobin, blood gases, electrolytes, and lactic acid levels. Hemodynamic energy was calculated using the Shepard's energy equivalent pressure. Near-infrared spectroscopy was used to monitor brain and kidney perfusion. The pulsatile ECMO group had a higher atrial pressure (systolic and mean), and significantly higher regional saturation at the brain level, than the nonpulsatile group (for both, P < 0.05). Additionally, the pulsatile ECMO group had higher methemoglobin levels within the normal range than the nonpulsatile group. Our study demonstrated that pulsatile ECMO produces significantly higher hemodynamic energy and improves systemic microcirculation, compared with nonpulsatile ECMO in acute cardiac failure.

Improving Arterial Pulsatility by Feedback Control of a Continuous Flow Left Ventricular Assist Device via in Silico Modeling

Purpose

Continuous flow left ventricular assist devices (CF-LVADs) generally operate at a constant speed, which causes a decrease in pulse pressure and pulsatility in the arteries and allegedly may lead to late complications such as aortic insufficiency and gastrointestinal bleeding. The purpose of this study is to increase the arterial pulse pressure and pulsatility while obtaining more physiological hemodynamic signals, by controlling the CF-LVAD flow rate.

Methods

A lumped parameter model was used to simulate the cardiovascular system including the heart chambers, heart valves, systemic and pulmonary arteries and veins. A baroreflex model was used to regulate the heart rate and a model of the Micromed DeBakey CF-LVAD (Micromed Technology, Houston, TX, USA) to simulate the pump dynamics at different operating speeds. A model simulating the flow rate through the aortic valve served as reference model. CF-LVAD operating speed was regulated by applying proportional-integral (PI) control to the pump flow rate. For comparison, the CF-LVAD was also operated at a constant speed, equaling the mean CF-LVAD speed as applied in pulsatile mode.

Results

In different operating modes, at the same mean operating speeds, mean pump output, mean arterial pressure, end-systolic and end-diastolic volume and heart rate were the same over the cardiac cycle. However, the arterial pulse pressure and index of pulsatility increased by 50% in the pulsatile CF-LVAD support mode with respect to constant speed pump support.

Conclusions

This study shows the possibility of obtaining more physiological pulsatile hemodynamics in the arteries by applying output-driven varying speed control to a CF-LVAD.

Computational fluid dynamics analysis of the pump parameters in the helical flow pump

The helical flow pump (HFP) was invented to develop a total artificial heart at the University of Tokyo in 2005. The HFP consists of the multi-vane impeller involving rotor magnets, a motor stator and pump housing having double-helical volutes. To investigate the characteristics of the HFP, computational fluid dynamics analysis was performed. Validation of the computational model was performed with the data of the actual pump. A control computational model in which the vane area corresponded approximately to that of the actual pump was designed for the parametric study. The parametric study was performed varying the vane height, vane width and helical volute pitch. When the vane height was varied from 0.5 to 1.5 times that of the control computational model, the H-Q (pressure head vs. flow) and efficiency curves were translated in parallel with the vane height. When the vane height was two and three times that of the control computational model, the profile of these curves changed. From the results, the best proportion for the vane was considered to be a vane height between 1.5 and 2 times the vane width. The effect of vane width was not very strong compared to that of the vane height. A similar tendency in vane height was observed by varying the helical volute pitch. The best helical volute-pitch size is considered to be between 1.5 and 2 times the vane width. Although further study is necessary to determine the best values for these parameters, the characteristics of the pump parameters in the HFP could be approximately clarified.

Exercise performance of chronic heart failure patients in the early period of support by an axial-flow left ventricular assist device as destination therapy

Axial-flow left ventricular assist devices (LVADs) are increasingly used as destination therapy in end-stage chronic heart failure (CHF), as they improve survival and quality of life. Their effect on exercise tolerance in the early phase after implantation is still unclear. The aim of this study was to evaluate the effect of LVADs on the exercise capacity of a group of CHF patients within 2 months after initiation of circulatory support. Cardiopulmonary exercise test data were collected for 26 consecutive LVAD-implanted CHF patients within 2 months of initiation of assistance; the reference group consisted of 30 CHF patients not supported by LVAD who were evaluated after an episode of acute heart failure. Both LVAD and reference groups showed poor physical performance; LVAD patients achieved lower workload (LVAD: 36.3 ± 9.0 W, reference: 56.6 ± 18.2 W, P < 0.001) but reached a similar peak oxygen uptake (peak VO2 ; LVAD: 12.5 ± 3.0 mL/kg/min, reference: 13.6 ± 2.9 mL/kg/min, P = ns) and similar percentages of predicted peak VO2 (LVAD: 48.8 ± 13.9%, reference: 54.2 ± 15.3%, P = ns). While the values of the O2 uptake efficiency slope were 12% poorer in LVAD patients than in reference patients (1124.2 ± 226.3 vs. 1280.2 ± 391.1; P = ns), the kinetics of VO2 recovery after exercise were slightly better in LVAD patients (LVAD: 212.5 ± 62.5, reference: 261.1 ± 80.2 sec, P < 0.05). In the first 2 months after initiation of circulatory support, axial-flow LVAD patients are able to sustain a low-intensity workload; though some cardiopulmonary exercise test parameters suggest persistence of a marked physical deconditioning, their cardiorespiratory performance is similar to that of less compromised CHF patients, possibly due to positive hemodynamic effects beginning to be produced by the assist device.

Use of RotaFlow (MAQUET) for temporary right ventricular support during implantation of HeartMate II left ventricular assist device

Temporary right ventricular (RV) support is considered during insertion of a left ventricular assist device in patients who are at risk of right ventricular dysfunction. There are several circuits and cannulation strategies available. Here, we report an effective and safe method for achieving RV support using the RotaFlow (Maquet) extracorporeal pump with inflow and outflow grafts placed through small opposing lateral thoracotomy incisions.

Artificial organs 2010: a year in review

In this Editor's Review, articles published in 2010 are organized by category and briefly summarized. As the official journal of The International Federation for Artificial Organs, The International Faculty for Artificial Organs, and the International Society for Rotary Blood Pumps, Artificial Organs continues in the original mission of its founders "to foster communications in the field of artificial organs on an international level."Artificial Organs continues to publish developments and clinical applications of artificial organ technologies in this broad and expanding field of organ Replacement, Recovery, and Regeneration from all over the world. We take this time also to express our gratitude to our authors for offering their work to this journal. We offer our very special thanks to our reviewers who give so generously of time and expertise to review, critique, and especially provide such meaningful suggestions to the author's work whether eventually accepted or rejected and especially to those whose native tongue is not English. Without these excellent and dedicated reviewers the quality expected from such a journal could not be possible. We also express our special thanks to our Publisher, Wiley-Blackwell, for their expert attention and support in the production and marketing of Artificial Organs. In this Editor's Review, that historically has been widely received by our readership, we aim to provide a brief reflection of the currently available worldwide knowledge that is intended to advance and better human life while providing insight for continued application of technologies and methods of organ Replacement, Recovery, and Regeneration. We look forward to recording further advances in the coming years.