Haptic Virtual Fixture for Robotic Cardiac Catheter Navigation

Cardiac X-ray image-based haptic guidance for robot-assisted coronary intervention: a feasibility study

PURPOSE

Effective and efficient haptic guidance is desirable for tele-operated robotic surgery because it has a potential to enhance surgeon's skills, especially in coronary interventions where surgeon loses both an eye-hand coordination and a direct sight to the organ. This paper proposes a novel haptic guidance procedure-both kinesthetic and cutaneous, which solely depends upon X-ray images, for tele-robotic system that assists an efficient navigation of the guidewire towards the target location during a coronary intervention.

METHODS

Proposed methodology requires cardiologists to draw virtual fixtures (VFs) on angiograms as a preoperative procedure. During an operation, these VFs direct the guidewire to the desired coronary vessel. For this, the position and orientation of guidewire tip are calculated with respect to VFs' anatomy, using image processing on the real-time 2D fluoroscopic images. The haptic feedbacks are then rendered on to the master device depending on the interaction with attractive and repulsive, guidance and forbidden region VFs.

RESULTS

A feasibility study in the laboratory environment is performed by using a webcam as an image acquisition device and a phantom-based coronary vessel model. The subsequent statistical analysis shows that, on an average, a decrease of approx. 37% in task completion time is observed with haptic feedback. Moreover, haptic guidance is found effective for most difficult branch, whereas there is a minimal significance of such haptics for the easiest branch.

CONCLUSIONS

The proposed haptic guidance procedure may assist cardiologists for an efficient and effective guidewire navigation during a surgical procedure. The cutaneous haptics (vibration feedback) is found more helpful in coronary interventions compared with kinesthetic haptics (force feedback).

Design and experimental evaluation of an automated catheter operating system

Manual catheter-based interventions (CBIs) suffer from exposure of the interventionalists to X-ray, and dependence of their performance on the expertise and fatigue level of the interventionalists. Robot-assisted catheterization systems (RACS) have been introduced in recent years to improve the efficiency of CBIs; however, using them is still associated with some difficulties such as set-up dependency to a specific type of intervention instrument, not being portable, and offering limited options of operation modes. The objective of this research is to develop a new RACS to address these shortcomings. We propose Althea II as an improvement for our previously introduced RACS, Althea I. Althea II is designed for both research purposes and clinical applications including catheter-based cardiovascular interventions. Althea II benefits from a novel structural design leading to a significantly reduced weight and making the device inclusive for a broader range of intervention instruments. Also, a tip detection algorithm is developed and integrated into the graphical user interface (GUI) to enable image-based navigation, and accordingly, fully automatic navigation. Althea II has improved the outcome of catheter-based interventions by increased accuracy and precision of the intervention. The system can navigate the catheter tip to a designated target with an accuracy higher than 90% in both velocity and positioning mode. The device is associated with an upgraded GUI equipped with a strong tip detection algorithm with an accuracy of 0.05 mm. Moreover, Althea II gains from a quicker assembly time (20 minutes, which equals five times faster). The independency from specific catheters, several modes of function, an imaged-based feedback control, portability, and a remote function should allow operation even from beginners and reduce X-ray exposure. The preliminary research studies verified the accuracy and repeatability of Althea II, demonstrated the feasibility and applicability of using the set-up in multiple applications, and highlighted the improved set-up capabilities over the currently available RACS.

A wearable vibrotactile system for distributed guidance in teleoperation and virtual environments

A novel wearable vibrotactile system is proposed in this article to enhance the performance of teleoperation robot systems. Using a wearable vibrotactile glove, the proposed system guides the operator in the master-slave control through a vibrotactile-visual guidance method. Based on sensory substitution, the vibrotactile-visual combined guidance method combines vibration stimuli and visual feedback to substitute the virtual guidance force. A vibrotactile potential field is constructed in the workspace of the master-operator to calculate the frequency of the vibration stimulus. To provide vibration stimuli, a novel vibrotactile glove is designed and manufactured based on the layout of the sensitive region of human hand. As the human hand is unable to discriminate vibration stimuli of all frequencies, the vibration stimulus is discretization according to the result of the vibration discriminability experiment. At last, two contrast experiments in obstacle-free and obstacle-existing environments are conducted to verify the feasibility and effectiveness of the wearable vibrotactile system. The results show that this wearable vibrotactile system is an effective solution for guiding the operators in teleoperation and virtual environments.

An advanced simulator for orthopedic surgical training

PURPOSE

The purpose of creating the virtual reality (VR) simulator is to facilitate and supplement the training opportunities provided to orthopedic residents. The use of VR simulators has increased rapidly in the field of medical surgery for training purposes. This paper discusses the creation of the virtual surgical environment (VSE) for training residents in an orthopedic surgical process called less invasive stabilization system (LISS) surgery which is used to address fractures of the femur.

METHOD

The overall methodology included first obtaining an understanding of the LISS plating process through interactions with expert orthopedic surgeons and developing the information centric models. The information centric models provided a structured basis to design and build the simulator. Subsequently, the haptic-based simulator was built. Finally, the learning assessments were conducted in a medical school.

RESULTS

The results from the learning assessments confirm the effectiveness of the VSE for teaching medical residents and students. The scope of the assessment was to ensure (1) the correctness and (2) the usefulness of the VSE. Out of 37 residents/students who participated in the test, 32 showed improvements in their understanding of the LISS plating surgical process. A majority of participants were satisfied with the use of teaching Avatars and haptic technology. A paired t test was conducted to test the statistical significance of the assessment data which showed that the data were statistically significant.

CONCLUSION

This paper demonstrates the usefulness of adopting information centric modeling approach in the design and development of the simulator. The assessment results underscore the potential of using VR-based simulators in medical education especially in orthopedic surgery.

Prevalence of haptic feedback in robot-mediated surgery: a systematic review of literature

With the successful uptake and inclusion of robotic systems in minimally invasive surgery and with the increasing application of robotic surgery (RS) in numerous surgical specialities worldwide, there is now a need to develop and enhance the technology further. One such improvement is the implementation and amalgamation of haptic feedback technology into RS which will permit the operating surgeon on the console to receive haptic information on the type of tissue being operated on. The main advantage of using this is to allow the operating surgeon to feel and control the amount of force applied to different tissues during surgery thus minimising the risk of tissue damage due to both the direct and indirect effects of excessive tissue force or tension being applied during RS. We performed a two-rater systematic review to identify the latest developments and potential avenues of improving technology in the application and implementation of haptic feedback technology to the operating surgeon on the console during RS. This review provides a summary of technological enhancements in RS, considering different stages of work, from proof of concept to cadaver tissue testing, surgery in animals, and finally real implementation in surgical practice. We identify that at the time of this review, while there is a unanimous agreement regarding need for haptic and tactile feedback, there are no solutions or products available that address this need. There is a scope and need for new developments in haptic augmentation for robot-mediated surgery with the aim of improving patient care and robotic surgical technology further.

Current and emerging robot-assisted endovascular catheterization technologies: a review

Endovascular techniques have been embraced as a minimally-invasive treatment approach within different disciplines of interventional radiology and cardiology. The current practice of endovascular procedures, however, is limited by a number of factors including exposure to high doses of X-ray radiation, limited 3D imaging, and lack of contact force sensing from the endovascular tools and the vascular anatomy. More recently, advances in steerable catheters and development of master/slave robots have aimed to improve these practices by removing the operator from the radiation source and increasing the precision and stability of catheter motion with added degrees-of-freedom. Despite their increased application and a growing research interest in this area, many such systems have been designed without considering the natural manipulation skills and ergonomic preferences of the operators. Existing studies on tool interactions and natural manipulation skills of the operators are limited. In this manuscript, new technical developments in different aspects of robotic endovascular intervention including catheter instrumentation, intra-operative imaging and navigation techniques, as well as master/slave based robotic catheterization platforms are reviewed. We further address emerging trends and new research opportunities towards more widespread clinical acceptance of robotically assisted endovascular technologies.

Impact of a unique international conference on pediatric mechanical circulatory support and pediatric cardiopulmonary perfusion research

There is no question that the International Conference on Pediatric Mechanical Circulatory Support Systems and Pediatric Cardiopulmonary Perfusion is a unique event that has had a significant impact on the treatment of neonatal, infantile, and pediatric cardiopulmonary patients around the globe since 2005. This annual event will continue as long as there is a need to fill the gap for underserved patient population. It will also continue to recognize promising young investigators based on their full manuscripts for young investigator awards.

Artificial organs 2011: a year in review

In this Editor's Review, articles published in 2011 are organized by category and briefly summarized. As the official journal of The International Federation for Artificial Organs, The International Faculty for Artificial Organs, and the International Society for Rotary Blood Pumps, Artificial Organs continues in the original mission of its founders "to foster communications in the field of artificial organs on an international level."Artificial Organs continues to publish developments and clinical applications of artificial organ technologies in this broad and expanding field of organ replacement, recovery, and regeneration from all over the world. We take this time also to express our gratitude to our authors for offering their work to this journal. We offer our very special thanks to our reviewers who give so generously of time and expertise to review, critique, and especially provide meaningful suggestions to the author's work whether eventually accepted or rejected. Without these excellent and dedicated reviewers, the quality expected from such a journal would not be possible. We also express our special thanks to our Publisher, Wiley-Blackwell, for their expert attention and support in the production and marketing of Artificial Organs. In this Editor's Review, that historically has been widely well-received by our readership, we aim to provide a brief reflection of the currently available worldwide knowledge that is intended to advance and better human life while providing insight for continued application of technologies and methods of organ replacement, recovery, and regeneration. We look forward to recording further advances in the coming years.