Effect of dynamic loading methods on cement film thickness in vitro

Nrf2 signaling attenuates epithelial-to-mesenchymal transition and renal interstitial fibrosis via PI3K/Akt signaling pathways

BACKGROUND

Nrf2 constitutes a therapeutic reference point for renal fibrosis and chronic kidney diseases. Nrf2-related signaling pathways are recognized to temper endothelial-to-mesenchymal transition (EMT) in fibrotic tissue. Nevertheless, the mechanism by which Nrf2 mitigates renal interstitial fibrosis is imprecise.

METHODS

The relationship between Nrf2 and renal interstitial fibrosis was investigated using the unilateral ureteral obstruction (UUO) model of Nrf2^-/- mice. The mice were separated into four groups, based on the treatment and intervention: Nrf2^-/- + UUO, Nrf2^-/- + Sham, WT + UUO and WT + Sham. Histological examination of renal tissue following the hematoxylin-eosin and Masson staining was carried out, as well as immunohistochemical staining. Additionally, to confirm the in vivo discoveries, in vitro experiments with HK-2 cells were also performed.

RESULTS

The Nrf2^-/- + UUO group showed more severe renal interstitial fibrosis compared to the WT + UUO, Nrf2^-/- + Sham and WT + Sham groups. Furthermore, the manifestations of α-SMA and Fibronectin significantly increased, and the manifestation of E-cadherin considerably decreased in kidney tissues from the group of Nrf2^-/- + UUO, compared to the WT + UUO group. The Nrf2 protein level significantly decreased in HK-2 cells, in reaction to the TGF-β1 concentration. In addition, the overexpression of Nrf2 presented contradictory results. What is more, the PI3K/Akt signaling pathway was discovered to be activated in the proteins extracted from cultured cells, and treated with Nrf2 siRNA and kidney tissues from the Nrf2^-/- + UUO group.

CONCLUSIONS

The results we obtained demonstrate that Nrf2 signaling pathway may perhaps offset the development of EMT, prompted by TGF-β1 and renal interstitial fibrosis. Likewise, the anti-fibrotic effect of Nrf2 was imparted by the inactivation of PI3K/Akt signaling. From our discoveries, we deliver new insight related to the prevention and treatment of kidney fibrosis.

A Review of Dental Cements

This review provides an in-depth comparison of advantages and disadvantages of different types of dental cements as they are used for cementing base metal alloy crowns in dogs.

Effect of Sonic Application of Self-Adhesive Resin Cements on Push-Out Bond Strength of Glass Fiber Posts to Root Dentin

The aim of this study was to evaluate the influence of a sonic application of self-adhesive resin cements on the bond strength of glass fiber posts to root dentin. Eighty bovine incisors were randomly divided into eight groups (n = 10). Four self-adhesive resin cements were used-RelyX U200 (3M/ESPE), Bifix SE (Voco), seT PP (SDI), and Panavia SA (Kuraray). The cements were inserted into the root canal in two different modes-Centrix syringe (control) or with a sonic device (Sonic Smart). The roots were sectioned and taken to a universal test machine (Instron 3342) to perform the push-out test. The fracture pattern was evaluated by stereomicroscope and scanning electron microscope. The bond strength data were analyzed by two-way ANOVA and Tukey tests (α = 0.05). The interaction between the main factors was significant (p = 0.002). The sonic application increased the bond strength in comparison with the conventional application for the RelyX U200 (p < 0.001) and Bifix SE (p < 0.017) cements. However, for the seT PP and Panavia SA cements, the bond strength values did not differ significantly (p > 0.05). The fracture pattern showed adhesive at the interface between the luting cement and the dentin. Using a sonic device in the application of self-adhesive resin cement helpedpromote an increase in the bond strength for RelyX U200 and Bifix SE.

Cement shield membrane technique to minimize residual cement on implant crowns: A dental technique

Residual cement around implant crowns can cause peri-implant disease, which can be minimized by precementing on a copy abutment. This article describes the use of polytetrafluoroethylene (PTFE) tape to allow an intraorally delivered custom or stock abutment to act similar to a copy abutment. It requires minimal change to the restorative dentist's routine and helps minimize the risk of cement-induced peri-implant disease.

Influence of Different Luting Agents on the Marginal Discrepancy of Procera® AllCeram Alumina Crown Copings – An Experimental Study

Two maxillary first molars and two central incisor typhodont teeth were prepared with 0.8 mm chamfer, 2.0 mm occlusal reduction, and 6 degree taper. The prepared teeth were duplicated 9 times to obtain 36 die stone models and divided into three groups (n = 12). Luting agents tested were zinc phosphate, glass ionomer and resin cement. Procera®AllCeram 0.6 mm coping was fixed with a calibrated finger force of 50 N. The absolute marginal discrepancy was measured using the scanning electron microscope on four axial walls with 4 measurements on each wall to obtain a total of 16 readings for one tooth. Mann Whitney U test was applied to find significant differences between luting cements and Kruskal Wallis tests among groups. Results The absolute marginal discrepancies of cements were in reducing order zinc phosphate (AZ) 53 μm; resin (AR) 44.5 μm, glass ionomer (AG) 29 μm. There was a significant difference among luting cements AG V/s AZ (p = 0.001) and AR V/s AG (p = 0.003), except AR V/s AZ (p = 0.213). All axial surfaces except mesial showed a significant difference. Conclusion The study concluded that different luting media have a definite effect over the final fit of AllCeram coping. Absolute marginal discrepancy was within the accepted level of 100 μm. Distal axial surface demonstrated a wider gap among all the luting agents.

Diametral tensile strength and film thickness of an experimental dental luting agent derived from castor oil

The need to develop new dental luting agents in order to improve the success of treatments has greatly motivated research.

Current status of luting agents for fixed prosthodontics

STATEMENT OF THE PROBLEM

The long-term clinical outcome of fixed prosthodontic treatment depends, in part, on the use of adhesives that can provide an impervious seal between the restoration and the tooth. There are several types of available luting agents, each possessing unique properties and handling characteristics. No one product is ideal for every type of restoration.

PURPOSE

The purpose of this article is to review available dental luting agents, discuss improvements and drawbacks in newly formulated adhesives, and present the indications for their use.

RESULTS

Each cement type is physically and chemically unique. A single adhesive will not suffice in modern day clinical practice.

Dental luting agents: A review of the current literature

STATEMENT OF PROBLEM

The practice of fixed prosthodontic has changed dramatically with the introduction of innovative techniques and materials. Adhesive resin systems are examples of these changes that have led to the popularity of bonded ceramics and resin-retained fixed partial dentures. Today's dentist has the choice of a water-based luting agent (zinc phosphate, zinc polycarboxylate, glass ionomer, or reinforced zinc oxide-eugenol) or a resin system with or without an adhesive. Recent formulations of glass ionomer luting agents include resin components (resin-modified glass ionomers), which are increasingly popular in clinical practice.

PURPOSE

This review summarizes the research on these systems with the goal of providing information that will help the reader choose the most suitable material.

MATERIAL

The scientific studies have been evaluated in relation to the following categories: (1) biocompatibility, (2) caries or plaque inhibition, (3) microleakage, (4) strength and other mechanical properties, (5) solubility, (6) water sorption, (7) adhesion, (8) setting stresses, (9) wear resistance, (10) color stability, (11) radiopacity, (12) film thickness or viscosity, and (13) working and setting times. In addition, guidelines on luting-agent manipulation are related to available literature and include: (1) temporary cement removal, (2) smear layer removal, (3) powder/liquid ratio, (4) mixing temperature and speed, (5) seating force and vibration, and (6) moisture control. Tables of available products and their properties are also presented together with current recommendations by the authors with a rationale.

Marginal adaptation of implant-supported metal-ceramic crowns fabricated with gold cylinders

PURPOSE

The purpose of this investigation was to determine the mean marginal discrepancy of metal-ceramic crowns fabricated with gold cylinders and cemented on implant abutments. These discrepancies were then compared with those measured previously for implant-supported ceramic crowns.

MATERIALS AND METHODS

Fifteen Nobel BioCare CeraOne abutments were connected to implant fixtures embedded in acrylic resin blocks. Marginal discrepancies were determined for gold cylinders, gold cylinders plus ceramic alloy (metal frameworks), completed metal-ceramic crowns, and cemented metal-ceramic crowns using a stereomicroscope equipped with a video camera linked to a computer. A Hotelling's T2 test (p < or = .05) was used to evaluate potential differences in mean marginal discrepancies among groups.

RESULTS

The mean marginal discrepancies were: 1) gold cylinders, 7.56 +/- 2.73 microns; 2) metal frameworks, 6.21 +/- 1.34 microns; 3) metal-ceramic crowns, 11.06 +/- 3.21 microns; and 4) zinc-phosphate cemented crowns, 31.47 +/- 6.65 microns. No significant difference between gold cylinders and metal frameworks was found. Mean marginal discrepancies for metal-ceramic crowns were significantly greater than discrepancies for cast gold cylinders. Cemented-crown mean marginal discrepancy was significantly greater than all other means.

CONCLUSIONS

Cemented metal-ceramic crowns fabricated using proprietary gold cylinders exhibited well-fitting margins (31.47 microns).