An animal model for interface tissue formation in cemented hip replacements

A new minimal-invasive approach for total hip replacement in sheep

BACKGROUND

Over the last 50 years arthroplasty became the gold-standard treatment for disabling conditions of the coxofemoral joint. Variations of anterior, lateral, and dorsal incision have been applied, but as each approach requires the incision and reflection of various muscles to gain adequate exposure of the joint results are still controversial.

OBJECTIVE

The purpose of this study was to develop a minimal-invasive, tissue-sparing approach in sheep with reduced risks in animal testing.

METHODS

12 mature sheep underwent hip surgery as part of a study to evaluate a hip resurfacing system. In line with the preliminary cadaveric tests a modified, minimal-invasive, musclepreserving surgical approach was sought after.

RESULTS

We developed a surgical approach to the coxofemoral joint in sheep using only blunt tissue dissection after skin incision without any limitations in joint exposure or increased blood loss/duration of surgery.

CONCLUSION

Even though limitations occur and femoral orientation in sheep differs from man, joint forces have similar relative directions to the bone with similar bony and vascular anatomy. Therefore, this minimal-invasive muscle preserving approach might be a safe and comparable alternative in still inevitable animal testing.

Micrometer-Sized Titanium Particles Induce Aseptic Loosening in Rabbit Knee

Wear debris induced aseptic loosening is the leading cause of total knee arthroplasty (TKA) failure. The complex mechanism of aseptic loosening has been a major issue for introducing effective prevention and treatment methods, so a simplified yet efficient rabbit model was established to address this concern with the use of micrometer-sized titanium particles. 20 New Zealand white rabbits were selected and divided into two groups (control = 10, study = 10). A TKA surgery was then performed for each of them, with implantation of a titanium rod prosthesis which was coated evenly with micrometer-sized titanium in the study group and nothing in the control group, into right femoral medullary cavity. After 12 weeks, all the animals were euthanized and X-ray analyses, H&E staining, Goldner Masson trichrome staining, Von Kossa staining, PCR, and Western blotting of some specific mRNAs and proteins in the interface membrane tissues around the prosthesis were carried out. The implantation of a titanium rod prosthesis coated with 20 μm titanium particles into the femoral medullary cavity of rabbits caused continuous titanium particle stimulation around the prosthesis, effectively inducing osteolysis and aseptic loosening. Titanium particle-induced macrophages produce multiple inflammatory factors able to activate osteoclast differentiation through the OPG/RANKL/RANK signaling pathway, resulting in osteolysis while suppressing the function of osteoblasts and reducing bone ingrowth around the prosthesis. This model simulated the implantation and loosening process of an artificial prosthesis, which is an ideal etiological model to study the aseptic prosthetic loosening.

Emerging ideas: can erythromycin reduce the risk of aseptic loosening?

BACKGROUND

Persistent inflammatory reaction to wear debris causes periprosthetic osteolysis and loosening. Some authors have advocated pharmaceutical approaches to reduce the inflammatory reaction. Erythromycin has antiinflammatory effects independent of its antimicrobial properties. Although oral erythromycin reportedly inhibits periprosthetic tissue inflammation in patients with aseptic loosening, long-term systematic erythromycin treatment is not recommended owing to its side effects. Therefore, it would be advantageous to restrict erythromycin delivery to the inflammatory periprosthetic tissue without causing side effects.

QUESTIONS/HYPOTHESES

Erythromycin eluted from hydroxyapatite-coated titanium (Ti) pins inhibits periprosthetic tissue inflammation and osteolysis.

METHOD OF STUDY

We propose restricting erythromycin delivery to the inflammatory periprosthetic site. A previously described rat model of ultrahigh molecular weight polyethylene (UHMWPE) particle-induced periprosthetic tissue inflammation and osteolysis will be used to test the effect of local delivery of erythromycin via Peri-Apatite(TM)-coated Ti implants. The outcome measures will include bone ingrowth (μCT), implant stability (pullout test), and histologic analysis of periprosthetic tissues.

SIGNIFICANCE

Pharmacologic intervention aimed at slowing, preventing, or reversing the aseptic loosening process would represent an advance in the management of joint replacement. Erythromycin may be appropriate for prophylactically treating patients who have repeated revision surgery and/or show early signs of progressive osteolysis after arthroplasty.

Polyethylene and metal wear particles: characteristics and biological effects

This paper first presents a brief overview about the mechanism of wear particle formation as well as wear particle characteristics in metal-on-polyethylene and metal-on-metal artificial hip joints. The biological effects of such particles are then described, focusing on the inflammatory response induced by each type of particles as well as on how metal wear products may be the source of a T lymphocyte-mediated specific immune response, early adverse tissue responses, and genotoxicity. Finally, some of the current in vivo models used for the analysis of tissue response to various wear particles are presented.

New animal models of wear-particle osteolysis

Particle debris resulting from in vivo degradation of total joint replacement components are recognised as the major factor limiting the longevity of joint reconstruction and the overall success of the procedure. Better understanding the complex cellular and tissue mechanisms and interactions resulting in wear-particle osteolysis requires a number of experimental approaches, including radiological monitoring and analysis of retrieved tissues from clinical cases, in vitro experiments, and also animal-model investigations. In consideration of both their advantages and drawbacks, this paper provides an historical overview of numerous animal models that have been developed over the last three decades to investigate the pathogenesis of wear-particle osteolysis and to facilitate the preclinical testing of new treatment options. The authors also focus on recent studies in order to provide a better understanding of the current state of the art on this subject and propose some perspectives regarding technical and fundamental questions.

Prevention of strain-related osteopenia in aseptic loosening of hip prostheses using perioperative bisphosphonate

The hypothesis tested in this study was that perioperative administration of the bisphosphonate zoledronate will reduce strain protection-related calcar osteopenia and maintain functional integration of the femoral component in an ovine hemiarthroplasty model. Twelve sheep received a unilateral cemented hemiarthroplasty where six animals were given nine intravenous infusions of zoledronate (10 microg/kg) pre-, peri-, and postsurgery over 8 months. Control animals received physiological saline only. Implants remained in vivo for 9 months. Ground reaction force (GRF) was used to assess functional loading of the implanted limb, bone mineral density (BMD) was quantified using dual energy X-ray absorptiometry (DEXA). Cortical bone area, thickness, and viable osteocytes were assessed histologically. No significant differences in GRF data between groups was identified. Results demonstrated a significant drop in BMD values in the control group (9.7%) when compared with the bisphosphonate-treated group (3.2%) (p = 0.0159). Histological results showed that cortical area, thickness, and the percentage of lacunae with viable osteocytes was significantly greater in the bisphosphonate-treated group when compared with control (p = 0.002, p = 0.001, p = 0.003, respectively). The administration of zoledronate reduced cortical osteopenia in the calcar region of the proximal femur and this therapy could be used as a preventive measure to combat strain protection osteopenia and its contribution to associated aseptic loosening in total hip replacement surgery.

Biocompatibility issues with modern implants in bone - a review for clinical orthopedics

Skeletal defects may result from traumatic, infectious, congenital or neoplastic processes and are considered to be a challenge for reconstructive surgery. Although the autologous bone graft is still the “gold standard”, there is continuing demand for bone substitutes because of associated disadvantages, such as limited supply and potential donor side morbidity [1]. This is not only true for indications in orthopedic and craniomaxillofacial surgeries, but also in repairing endodontic defects and in dental implantology.

Before clinical use all new bone substitute materials have to be validated for their osseoconductive and - depending on the composition of the material also –inductive ability, as well as for their long-term biocompatibility in bone. Serving this purpose various bone healing models to test osteocompatibility and inflammatory potential of a novel material on one hand and, on the other hand, non-healing osseous defects to assess the healing potential of a bone substitute material have been developed. Sometimes the use of more than one implantation site can be helpful to provide a wide range of information about a new material [2].

Important markers for biocompatibility and inflammatory responses are the cell types appearing after the implantation of foreign material. There, especially the role of foreign body giant cells (FBGC) is discussed controversial in the pertinent literature, such that it is not clear whether their presence marks an incompatibility of the biomaterial, or whether it belongs to a normal degradation behavior of modern, resorbable biomaterials.

This publication is highlighting the different views currently existing about the function of FBGC that appear in response to biomaterials at the implantation sites. A short overview of the general classes of biomaterials, where FBGC may appear as cellular response, is added for clarity, but may not be complete.

Murine model of prosthesis failure for the long-term study of aseptic loosening

We examined a novel mouse model of wear debris-induced prosthesis instability and osteolysis, and its application for the evaluation of therapy. A stainless steel or titanium-alloy pin was implanted into the proximal tibia to form a contiguous surface with the articular cartilage. In some mice, titanium particles were injected into the tibial canal during the surgery, followed by monthly intraarticular injection. MicroCT scans revealed that the implants without particle challenge were stable without bone mineral density changes for 6 months. Histological analysis showed new bone formation around the implant at 6 weeks postsurgery. Periprosthetic soft tissue with inflammatory cells was a ubiquitous finding at the interface between the implant and surrounding bone in samples exposed to titanium particles, and expression of IL-1beta, TNFalpha, and CD68 was common in these joints. Pullout tests indicated that an average 5N load was required to pull out stable implants from surrounding bone. However, particle stimulation dramatically reduced the pullout force to less than 0.4 N. The feasibility of in vivo gene transfer on this model was confirmed by X-gal staining of synovial membrane and periprosthetic tissue after injection of AAV-LacZ in the prosthetic joint. This murine model of weight-bearing knee prosthesis provides an economical, reproducible, and easily obtained means to study joint arthroplasty failure. The ability to evaluate the biomechanical properties of the prosthetic joint, in addition to histological and biochemical examination, results in a useful model to investigate many of the properties of prosthetic joint components during the response to debris-associated osteolysis.

An analysis of the in vivo deterioration of Co-Cr-Mo implants through wear and corrosion

The degradation of Co-Cr-Mo ASTM F75-92 hip implants after a harvesting period of 81 months in sheep was investigated. Hip prostheses and tissue samples were obtained from a medical study involving total hip arthroplasty of the cemented type in 12 sheep. Upon euthanasia, the explants were retrieved for analyses of the surfaces and evidence of degradation, while tissue samples from the interface regions were harvested for chemical analysis and evidence of Co, Cr, and Mo contents. Clear evidence of wear and corrosion was detected. Results also indicated that the modes of metal transport through the poly(methyl methacrylate) bone cement play an important role as the surface degradation mechanisms of the metal. The results are being discussed in terms of electrochemical and triboelectrochemical behaviour of the Co-Cr-Mo alloy.

Effect of zoledronate on bone quality in the treatment of aseptic loosening of hip arthroplasty in the dog

Periprosthetic bone loss, which is a direct cause of aseptic loosening in total hip arthroplasty (THA), can be suppressed by bisphosphonates. It is unknown how the quality of this bone is affected in the presence of both wear debris (from implant) and bisphosphonates. The objective of this study was to evaluate the effect of zoledronate (ZLN) on bone quality in the presence of wear debris [polyethylene (PE) particles] in a canine model of uncemented THA. Thirty dogs underwent THA, and aseptic loosening was induced via implantation of PE particles packed into the femoral component. For 26 weeks until sacrifice, two groups (each n = 10) received weekly injections of ZLN (low dose 2 mug/kg, high dose 10 mug/kg) and the third group (control) received saline. Histological and radiographic examinations were performed to evaluate the degree of implant reaction. Histomorphometry (static/dynamic) was performed to evaluate bone turnover. Back-scattered electron imaging was used to quantify the newly formed bone and to evaluate the mineralization distribution. Density fractionation and X-ray diffraction were used to evaluate mineral properties, while four-point bending was used to determine mechanical properties. A dose-dependent presence of newly formed subperiosteal bone was found, which appeared to be less mineralized than the adjacent cortical bone. The high-dose ZLN group showed decreased cortical porosity and turnover and increased mineralization profile, failure strength, and modulus. We conclude that ZLN affects some of the material properties of cortical bone and allows the newly formed subperiosteal bone to remain and therefore affect the overall quality of the bone.

Hip replacement of the ovine hip with a zero dislocation rate

Ovine and caprine animals are frequently used as in vivo models for both total hip replacement and hemiarthroplasty. Historically the complication rate, particularly the dislocation rate, has been high. In studies involving animals it is imperative to keep complications to a minimum, both to reduce the distress of the individual animals, and also to keep the number of animals used in each study to the absolute minimum required. We describe an approach that has had a dislocation rate of zero out of 69 hips (mean follow-up 11 months). The authors recommend this approach in ovine and caprine studies of the hip joint. (Hip International 2005; 15: 230-4).