Groundwater remediation: the next 30 years

Co-migration behavior of toluene coupled with trichloroethylene and the response of the pristine groundwater ecosystems - A mesoscale indoor experiment

Experimental scale and sampling precision are the main factors limiting the accuracy of migration and transformation assessments of complex petroleum-based contaminants in groundwater. In this study, a mesoscale indoor aquifer device with high environmental fidelity and monitoring accuracy was constructed, in which dissolved toluene and trichloroethylene were used as typical contaminants in a 1.5-year contaminant migration experiment. The process was divided into five stages, namely, pristine, injection, accumulation, decrease, and recovery, and characteristics such as differences in contaminant migration, the responsiveness of environmental factors, and changes in microbial communities were investigated. The results demonstrated that the mutual dissolution properties of the contaminants increased the spread of the plume and confirmed that toluene possessed greater mobility and natural attenuation than trichloroethylene. Attenuation of the contaminant plume proceeded through aerobic degradation, nitrate reduction, and sulfate reduction phases, accompanied by negative feedback from characteristic ion concentrations, dissolved oxygen content, the oxidation-reduction potential and microbial community structure of the groundwater. This research evaluated the migration and transformation characteristics of typical petroleum-based pollutants, revealed the response mechanism of the ecosystem to pollutant, provided a theoretical basis for predicting pollutant migration and formulating control strategies.

Groundwater chlorinated solvent plumes remediation from the past to the future: a scientometric and visualization analysis

Contamination of groundwater with chlorinated hydrocarbons has serious adverse effects on human health. As research efforts in this area have expanded, a large body of literature has accumulated. However, traditional review writing suffers from limitations regarding efficiency, quantity, and timeliness, making it difficult to achieve a comprehensive and up-to-date understanding of developments in the field. There is a critical need for new tools to address emerging research challenges. This study evaluated 1619 publications related to this field using VOSviewer and CiteSpace visual tools. An extensive quantitative analysis and global overview of current research hotspots, as well as potential future research directions, were performed by reviewing publications from 2000 to 2022. Over the last 22 years, the USA has produced the most articles, making it the central country in the international collaboration network, with active cooperation with the other 7 most productive countries. Additionally, institutions have played a positive role in promoting the publication of science and technology research. In analyzing the distribution of institutions, it was found that the University of Waterloo conducted the majority of research in this field. This paper also identified the most productive journals, Environmental Science & Technology and Applied and Environmental Microbiology, which published 11,988 and 3253 scientific articles over the past 22 years, respectively. The main technologies are bioremediation and chemical reduction, which have garnered growing attention in academic publishing. Our findings offer a useful resource and a worldwide perspective for scientists engaged in this field, highlighting both the challenges and the possibilities associated with addressing groundwater chlorinated solvent plumes remediation.

Larger aggregate formed by self-assembly process of the mixture surfactants enhance the dissolution and oxidative removal of non-aqueous phase liquid contaminants in aquifer

Surfactants can transfer non-aqueous phase liquid (NAPL) contaminants to the aqueous phase, and enhance the removal of the latter in groundwater. However, the extensive use of surfactants causes secondary contamination and increases the non-target consumption of oxidants. It is pressing to develop a surfactant with high phase transfer efficiency and sound compatibility with oxidants to minimize the use of surfactants for groundwater remediation. The phase transfer capability of different surfactants and their binary mixtures, their enhanced KMnO4 oxidation performance for NAPL contaminants as well as influencing factors were investigated to solve the above-mentioned question. The results showed that Tween20, SDBS and BS-12 perform best in terms of phase transfer capability among nonionic, anionic and amphoteric surfactants respectively, and only SDBS and BS-12 produce a synergistic effect among the binary mixtures. The CMC of SDBS/BS-12 was lower than its ideal CMC value, and the self-assembly process of SDBS/BS-12 also formed larger aggregates, which improved the phase transfer performance. Compared to other single surfactants, the removal efficiency of petroleum hydrocarbons in the aquifer sediments was raised by 7.4-33.8 % using the mixed surfactant. The SDBS/BS-12 mixture was compatible with KMnO4 and boosted the reaction of NAPL contaminants with KMnO4 by transferring from the NAPL phase to the aqueous phase. As a result, the NAPL toluene and phenanthrene removal efficiency increased from 37 % and 29 % to 80 % and 86 % respectively. Natural organic matters inhibited the phase transfer efficiency of the SDBS/BS-12 mixture, whereas anions and monovalent cations enhanced the phase transfer capability of the mixture. High-valent cations led to precipitation in the SDBS/BS-12, which could be eliminated by adding Na2Si2O5. The SDBS/BS-12 mixture delivered the same phase transfer efficiency with the dosage of 1.73-23.07 % of other single surfactants, and its cost was equivalent to 0.25-41.7 % of the latter, thus embracing bright application prospects.

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem.

Nanofiltration for drinking water treatment: a review

In recent decades, nanofiltration (NF) is considered as a promising separation technique to produce drinking water from different types of water source. In this paper, we comprehensively reviewed the progress of NF-based drinking water treatment, through summarizing the development of materials/fabrication and applications of NF membranes in various scenarios including surface water treatment, groundwater treatment, water reuse, brackish water treatment, and point of use applications. We not only summarized the removal of target major pollutants (e.g., hardness, pathogen, and natural organic matter), but also paid attention to the removal of micropollutants of major concern (e.g., disinfection byproducts, per- and polyfluoroalkyl substances, and arsenic). We highlighted that, for different applications, fit-for-purpose design is needed to improve the separation capability for target compounds of NF membranes in addition to their removal of salts. Outlook and perspectives on membrane fouling control, chlorine resistance, integrity, and selectivity are also discussed to provide potential insights for future development of high-efficiency NF membranes for stable and reliable drinking water treatment.

Surfactant-enhanced remediation of oil-contaminated soil and groundwater: A review

Oil leakage, which is inevitable in the process of extraction, processing, transportation and storage, seriously undermines the soil and groundwater environment. Surfactants can facilitate the migration and solution of oil contaminants from nonaqueous phase liquid (NAPL) or solid phase to water by reducing the (air/water) surface tension, (oil/water) interfacial tension and micellar solubilization. They can effectively enhance the hydrodynamic driven remediation technologies by improving the contact efficiency of contaminants and liquid remediation agents or microorganism, and have been widely used to enhance the remediation of oil-contaminated sites. This paper summarizes the characteristics of different types of surfactants such as nonionic, anionic, biological and mixed surfactants, their enhancements to the remediation of oil-contaminated soil and groundwater, and examines the factors influencing surfactant performance. The causes of tailing and rebound effects and the role of surfactants in suppressing them are also discussed. Laboratory researches and actual site remediation practices have shown that various types of surfactants offer diverse options. Biosurfactants and mixed surfactants are superior and worth attention among the surfactants. Using surfactant foams, adding shear-thinning polymers, and combining surfactants with in-situ chemical oxidation are effective ways to resolve tailing and rebound effects. The adsorption of surfactants on soils and aquifer sediments decreases remediation efficiency and may cause secondary pollution, Therefore the adsorption loss should be noticed and minimized.

Evaluation for the Removal Efficiency of VOCs and Heavy Metals by Zeolites-Based Materials in the Wastewater: A Case Study in the Tito Scalo Industrial Area

The current study was designed to demonstrate the efficiency of selected zeolites in the immobilization of heavy metals and volatile organic compounds from water in the industrial area of Tito Scalo (Basilicata Region in Southern Italy). The efficiency of zeolite materials has been evaluated by analyzing real water samples, by a multi-technique approach. Gas chromatography (GC) and inductively coupled plasma optical emission spectrometry (ICP-OES) were selected for the detection of volatile organic compounds (VOCs) and heavy metals respectively, and then by thermal analysis (TG, DTA) and X-ray powder diffraction (XRD) to verify the presence of contaminants in the structural channels of the adsorbents. ZSM-5 zeolite (MFI topology) was suitable for volatile organic compounds, showing removal efficiencies 87%. 13X (FAU topology) was more selective for in situ abatements of heavy metals, with efficiencies up to 100%. After VOCs and heavy metals removal, structure refinements of loaded zeolites highlighted variations of both lattice parameters and extraframework content confirming the pollutants immobilization in the framework microporosities. The occurrence of these species was also confirmed by DTA curves showing different phenomena explained on the basis of the nature and number of extraframework species hosted in the zeolite micropores.

Integrated hydrogeophysical modelling and data assimilation for geoelectrical leak detection

Time-lapse electrical resistivity tomography (ERT) measurements provide indirectobservations of hydrological processes in the Earth's shallow subsurface at high spatial and temporal resolution. ERT has been used in the past decades to detect leaks and monitor the evolution of associated contaminant plumes. Specifically, inverted resistivity images allow visualization of the dynamic changes in the structure of the plume. However, existing methods do not allow the direct estimation of leak parameters (e.g. leak rate, location, etc.) and their uncertainties. We propose an ensemble-based data assimilation framework that evaluates proposed hydrological models against observed time-lapse ERT measurements without directly inverting for the resistivities. Each proposed hydrological model is run through the parallel coupled hydro-geophysical simulation code PFLOTRAN-E4D to obtain simulated ERT measurements. The ensemble of model proposals is then updated using an iterative ensemble smoother. We demonstrate the proposed framework on synthetic and field ERT data from controlled tracer injection experiments. Our results show that the approach allows joint identification of contaminant source location, initial release time, and solute loading from the cross-borehole time-lapse ERT data, alongside with an assessment of uncertainties in these estimates. We demonstrate a reduction in site-wide uncertainty by comparing the prior and posterior plume mass discharges at a selected image plane. This framework is particularly attractive to sites that have previously undergone extensive geological investigation (e.g., nuclear sites). It is well suited to complement ERT imaging and we discuss practical issues in its application to field problems.

Long-term mass flux assessment of a DNAPL source area treated using bioremediation

This study assessed the long-term effectiveness of bioremediation as a remedial strategy for a chlorinated, ethene dense, non-aqueous phase liquid (DNAPL) source area, consisting of a higher- and a lower-permeability zone at Alameda Point, California. The evaluation was performed over 3.7 years after cessation of active source area bioremediation using passive flux meters (PFMs), push-pull tracer tests, and soil cores. PFMs showed that total chlorinated ethene molar discharge emanating from the source area remained relatively unchanged pre-and post-bioremediation, but molar discharge compositions shifted from trichloroethene (TCE) and cis-1,2-dichloroethene (cis-DCE) to vinyl chloride (VC) and ethene dominated during post-remedial monitoring. First-order rate constants, derived from PFM data at the edge of the source area and describing the complete dechlorination of TCE at 3.7 years following active bioremediation, were approximately 1.05 yr^-1, which was over three times lower than the rate 3.6 yr^-1 determined using compound stable isotope analysis (CSIA). Soil cores and push-pull tracer test data showed that DNAPL volume estimates were relatively unchanged pre- and post-bioremediation due to the remaining presence of DNAPL in the lower-permeability zone. These data suggest biotransformation processes are continuing in the higher-permeability zone, whereas DNAPL in the lower-permeability zone continues to serve as a significant source of groundwater contamination. The results suggest that it will take many years under current conditions to attain the United States Environmental Protection Agency (EPA) Maximum Contaminant Levels (MCLs) cleanup objectives.

Probabilistic risk assessment and spatial distribution of potentially toxic elements in groundwater sources in Southwestern Nigeria

The study investigated the concentration of potentially toxic heavy metals (PTHM) in groundwater sources (hand-dug wells and boreholes), spatial distribution, source apportionment, and health risk impact on local inhabitants in Ogun state. One hundred and eight water samples from 36 locations were analysed for Cr, Ni, Pb, Fe, Mn, Mg, Ca and Al. Mean values of 0.013, 0.003, 0.010, 0.088, 0.004 and 3.906 mg/L were obtained for Pb, Cr, Ni, Fe, Mn, and Al respectively at Iju district. Meanwhile, the average values of Pb, Ni, Fe, Mn, and Al concentrations at Atan district were 0.008, 0.0023, 0.011, 0.003, and 1.319 mg/L respectively. Results also revealed that the 44.4% and 11.13% of the borehole and well-water samples surpassed the World Health Organization limits for Pb at Atan. In Iju, the concentration of Pb and Al were relatively high, exceeding the stipulated standard in 100% of the samples. The Multivariate statistical analysis employed produced principal factors that accounted for 78.674% and 86.753% of the variance at Atan and Iju region respectively. Based on this, PTHM were traced to geogenic sources (weathering, dissolution, leaching) and anthropogenic emissions from industrial activities. In addition, the hazard quotient values obtained from the health risk assessment identified potential non-carcinogenic risk due to Pb via ingestion route. Ni was found to have high carcinogenic risk on adult and children, having exceeded the threshold limit. The outcome of the carcinogenic risk assessment revealed that 88.67% (for adults) and 1.12% (for children) of the cancer risk values surpassed the specified limits at Iju, whereas the cancer risk values were considerably lesser at Atan. In conclusion, the report of this study should serve as a beacon that will spark up strategic planning, comprehensive water resource management, and extensive treatment schemes in order to address the health complications linked with environmental pollution.

Past, Present, and Future of Groundwater Remediation Research: A Scientometric Analysis

In this study, we characterize the body of knowledge of groundwater remediation from 1950 to 2018 by employing scientometric techniques and CiteSpace software, based on the Science Citation Index Expanded (SCI-E) databases. The results indicate that the United States and China contributed 56.4% of the total publications and were the major powers in groundwater remediation research. In addition, the United States, Canada, and China have considerable capabilities and expertise in groundwater remediation research. Groundwater remediation research is a multidisciplinary field, covering water resources, environmental sciences and ecology, environmental sciences, and engineering, among other fields. Journals such as Environmental Science and Technology, Journal of Contaminant Hydrology, and Water Research were the major sources of cited works. The research fronts of groundwater remediation were transitioning from the pump-and-treat method to permeable reactive barriers and nanoscale zero‑valent iron particles. The combination of new persulfate ion‑activation technology and nanotechnology is receiving much attention. Based on the visualized networks, the intelligence base was verified using a variety of metrics. Through landscape portrayal and developmental trajectory identification of groundwater remediation research, this study provides insight into the characteristics of, and global trends in, groundwater remediation, which will facilitate the identification of future research directions.

Optimal remediation design and simulation of groundwater flow coupled to contaminant transport using genetic algorithm and radial point collocation method (RPCM)

The simulation-optimisation models of groundwater and contaminant transport can be a powerful tool in the management of groundwater resources and remediation design. In this study, using Multiquadratic Radial Basis Function (MRBF) a coupled groundwater flow and reactive transport of contaminant and oxidant was developed in the framework of the Meshfree method. The parameter analysis has determined the optimum shape parameter (0.97), and the results of the model were compared with a physical sandbox model which were in good agreement. The genetic algorithm approach was used to find the optimum design of the remediation using permanganate as an oxidant. To find the optimum design we considered two objectives and two constraints. The results revealed that the breakthrough of contaminant to the downstream area of interest and the concentration of the contaminant in this area is reduced significantly with optimisation.

Optimal Remediation Scheme for a Wastewater Recharge Site: Contaminants Fate and Transport Model

A 3-dimensional hydrologic groundwater flow and contaminant transport model was developed to address the feasibility and relevant time-scales for remediation of a large soil aquifer treatment (SAT) site for domestic wastewater. The model accounted for a range of organic pollutant retardation factors and biodegradation kinetics. In order to detect the effect of the most retained and the most refracted/recalcitrant pollutants, it was crucial to model fractions of different properties rather than with average set properties. Four aquifer remediation scenarios, including two active washing procedures and two involving natural attenuation, were evaluated. The remediation efficiencies, in terms of residual plume size and mass of pollutant washout, were compared to each other and to the current operation scheme. According to the results, remediation mainly via natural attenuation rather than some form of intense pump and treat technology, is feasible, unlike the situation with hazardous waste sites. Enforced washout becomes less efficient with time due to increasing retardation of the residual pollutants. Therefore, pollution containment with natural biodegradation, which removed 95% of the emerging contaminants within 30 to 40 years was found to be the most valuable remediation scheme.

Applications and factors influencing of the persulfate-based advanced oxidation processes for the remediation of groundwater and soil contaminated with organic compounds

Persulfate is the latest oxidant which is being used increasingly for the remediation of groundwater and soil contaminated with organic compounds. It is of great significant to offer readers a general summary about different methods of activating persulfate, mainly including heat-activated, metal ions-activated, UV-activated, and alkaline-activated. Meanwhile, in addition to persulfate concentration as an influencing factor for persulfate oxidation process, selected information like temperature, anions, cations, pH, and humic acid are presented and discussed. The last section focuses on the advantages of different activated persulfate processes, and the suggestions and research needs for persulfate-based advanced oxidation in the remediation of polluted groundwater and soil.

Remediation of nitrate-contaminated groundwater by PRB-Electrokinetic integrated process

Activated carbon is used as a reactive media in Permeable Reactive Barrier (PRB) for the removal of inorganic contaminants such as nitrate from groundwater. Since removal rate by this media decreases by time and due to the high costs of excavation and replacement of new media, the usage of activated carbon as an adsorbent in PRB is limited. The present study aimed to solve this defect by integrating electrokinetic process and PRB, using in-situ regeneration of activated carbon. This research was carried out on a laboratory scale using synthetically contaminated water and modified activated carbon as a reactive media in PRB. The effects of pH, nitrate concentration, carbon to sand ratio, and also electric gradient on the performance of the process were evaluated, and optimal conditions were determined, to increase the system longevity. According to the results, by applying an electric gradient of 1.25 V cm^-1 to the PRB alone process in optimum operating condition (135 mg L^-1 initial nitrate concentration, flow rate of 2.3 L min^-1, pH = 6.8, and carbon to sand ratios of 1:1) the adsorbent capacity increased by 90%. Under these conditions, the integrated process could keep nitrate concentration in the effluent below the standard limit for about 111 h, while the PRB alone process could do the same job for about 59 h. Also, SEM analysis showed that by applying electrokinetic process, activated carbon was regenerated. Integration of electrokinetic process and PRB was also caused nitrate to transfer from activated carbon media into the soil layer above the system. This nitrate-rich soil has the potential for reuse in agricultural activities.

Pore-scale simulations of concentration tails in heterogeneous porous media

The retention of contaminants in the finest and less-conductive regions of natural aquifer is known to strongly affect the decontamination of polluted aquifers. In fact, contaminant transfer from low to high mobility regions at the back end of a contaminant plume (i.e. back diffusion) is responsible for the long-term release of contaminants during remediation operation. In this paper, we perform pore-scale calculations for the transport of contaminant through heterogeneous porous media composed of low and high mobility regions with two objectives: (i) study the effect of permeability contrast and solute transport conditions on the exchange of solutes between mobile and immobile regions and (ii) estimate the mass of contaminants sequestered in low mobility regions based on concentration breakthrough curves.

Groundwater remediation from the past to the future: A bibliometric analysis

Groundwater is an important component of terrestrial ecosystems and plays a role in geochemical cycling. Groundwater is also used for agricultural irrigation and for the domestic supply of drinking water in most nations. However, groundwater contamination has led to many research efforts on groundwater remediation technologies and strategies. This study evaluated a total of 5486 groundwater remediation-related publications from 1995 to 2015 using bibliometric technology and social network analysis, to provide a quantitative analysis and a global view on the current research trend and future research directions. Our results underline a strong research interest and an urgent need to remediate groundwater pollution due to the increasing number of both groundwater contamination and remediation publications. In the past two decades, the United States (U.S.) published 41.1% of the papers and it was the core country of the international collaboration network, cooperating with the other 19 most productive countries. Besides the active international collaboration, the funding agencies also played positive roles to foster the science and technology publications. With respect to the analysis of the distribution of funding agencies, the National Science Foundation of China sponsored most of the groundwater remediation research. We also identified the most productive journals, Environmental Science and Technology and Journal of Contaminant Hydrology, which published 334 and 259 scientific articles (including research articles and reviews) over the past 20 years, respectively. In addition to journal publications, a patent analysis was performed to show the impact of intellectual property protection on journal publications. Three major remediation technologies, including chemical oxidation, biodegradation and adsorption, have received increasing interest in both journal publication and patent development. Our results provide a valuable reference and global overview to identify the potential obstacles and opportunities for researchers who currently work on groundwater contamination, remediation and related topics.

A Bayesian belief network approach for assessing uncertainty in conceptual site models at contaminated sites

A key component in risk assessment of contaminated sites is in the formulation of a conceptual site model (CSM). A CSM is a simplified representation of reality and forms the basis for the mathematical modeling of contaminant fate and transport at the site. The CSM should therefore identify the most important site-specific features and processes that may affect the contaminant transport behavior at the site. However, the development of a CSM will always be associated with uncertainties due to limited data and lack of understanding of the site conditions. CSM uncertainty is often found to be a major source of model error and it should therefore be accounted for when evaluating uncertainties in risk assessments. We present a Bayesian belief network (BBN) approach for constructing CSMs and assessing their uncertainty at contaminated sites. BBNs are graphical probabilistic models that are effective for integrating quantitative and qualitative information, and thus can strengthen decisions when empirical data are lacking. The proposed BBN approach facilitates a systematic construction of multiple CSMs, and then determines the belief in each CSM using a variety of data types and/or expert opinion at different knowledge levels. The developed BBNs combine data from desktop studies and initial site investigations with expert opinion to assess which of the CSMs are more likely to reflect the actual site conditions. The method is demonstrated on a Danish field site, contaminated with chlorinated ethenes. Four different CSMs are developed by combining two contaminant source zone interpretations (presence or absence of a separate phase contamination) and two geological interpretations (fractured or unfractured clay till). The beliefs in each of the CSMs are assessed sequentially based on data from three investigation stages (a screening investigation, a more detailed investigation, and an expert consultation) to demonstrate that the belief can be updated as more information becomes available.

A fuzzy rule based remedial priority ranking system for contaminated sites

Contaminated site remediation is generally difficult, time consuming, and expensive. As a result ranking may aid in efficient allocation of resources. In order to rank the priorities of contaminated sites, input parameters relevant to contaminant fate and transport, and exposure assessment should be as accurate as possible. Yet, in most cases these parameters are vague or not precise. Most of the current remediation priority ranking methodologies overlook the vagueness in parameter values or do not go beyond assigning a contaminated site to a risk class. The main objective of this study is to develop an alternative remedial priority ranking system (RPRS) for contaminated sites in which vagueness in parameter values is considered. RPRS aims to evaluate potential human health risks due to contamination using sufficiently comprehensive and readily available parameters in describing the fate and transport of contaminants in air, soil, and groundwater. Vagueness in parameter values is considered by means of fuzzy set theory. A fuzzy expert system is proposed for the evaluation of contaminated sites and a software (ConSiteRPRS) is developed in Microsoft Office Excel 2007 platform. Rankings are employed for hypothetical and real sites. Results show that RPRS is successful in distinguishing between the higher and lower risk cases.

Evaluating four-dimensional time-lapse electrical resistivity tomography for monitoring DNAPL source zone remediation

Practical, non-invasive tools do not currently exist for mapping the remediation of dense non-aqueous phase liquids (DNAPLs). Electrical resistivity tomography (ERT) exhibits significant potential but has not yet become a practitioner's tool due to challenges in interpreting the survey results at real sites. This study explores the effectiveness of recently developed four-dimensional (4D, i.e., 3D space plus time) time-lapse surface ERT to monitor DNAPL source zone remediation. A laboratory experiment demonstrated the approach for mapping a changing NAPL distribution over time. A recently developed DNAPL-ERT numerical model was then employed to independently simulate the experiment, providing confidence that the DNAPL-ERT model is a reliable tool for simulating real systems. The numerical model was then used to evaluate the potential for this approach at the field scale. Four DNAPL source zones, exhibiting a range of complexity, were initially simulated, followed by modeled time-lapse ERT monitoring of complete DNAPL remediation by enhanced dissolution. 4D ERT inversion provided estimates of the regions of the source zone experiencing mass reduction with time. Results show that 4D time-lapse ERT has significant potential to map both the outline and the center of mass of the evolving treated portion of the source zone to within a few meters in each direction. In addition, the technique can provide a reasonable, albeit conservative, estimate of the DNAPL volume remediated with time: 25% underestimation in the upper 2m and up to 50% underestimation at late time between 2 and 4m depth. The technique is less reliable for identifying cleanup of DNAPL stringers outside the main DNAPL body. Overall, this study demonstrates that 4D time-lapse ERT has potential for mapping where and how quickly DNAPL mass changes in real time during site remediation.

The new potential for understanding groundwater contaminant transport

The groundwater remediation field has been changing constantly since it first emerged in the 1970s. The remediation field has evolved from a dissolved-phase centric conceptual model to a DNAPL-dominated one, which is now being questioned due to a renewed appreciation of matrix diffusion effects on remediation. Detailed observations about contaminant transport have emerged from the remediation field, and challenge the validity of one of the mainstays of the groundwater solute transport modeling world: the concept of mechanical dispersion (Payne et al. 2008). We review and discuss how a new conceptual model of contaminant transport based on diffusion (the usurper) may topple the well-established position of mechanical dispersion (the status quo) that is commonly used in almost every groundwater contaminant transport model, and evaluate the status of existing models and modeling studies that were conducted using advection-dispersion models.