On the processivity of polymerases

The Transcriptional Gradient in Negative-Strand RNA Viruses Suggests a Common RNA Transcription Mechanism

We introduce a novel model of nonsegmented negative-strand RNA virus (NNSV) transcription. Previous models have relied on polymerase behavioral differences in the highly conserved intergenic sequences. Our model hypothesizes the transcriptional gradient in NNSVs is explained through a simple model with two parameters associated with the viral polymerase. Most differences in expression can be attributed to the processivity of the polymerase while additional attenuation occurs in the presence of overlapping genes. This model reveals a correlation between polymerase processivity and genome length, which is consistent with the universal entry of polymerases through the 3' end of the genome. Using this model, it is now possible to predict the transcriptional behavior of NNSVs from genotype alone, revolutionizing the design of novel NNSV variants for biomedical applications.

Fidelity Characterization of Highly Pathogenic Porcine Reproductive and Respiratory Syndrome Virus and NADC30-like Strain

The porcine reproductive and respiratory syndrome virus (PRRSV) has significantly impacted the global pork industry for over three decades. Its high mutation rates and frequent recombination greatly intensifies its epidemic and threat. To explore the fidelity characterization of Chinese highly pathogenic PRRSV JXwn06 and the NADC30-like strain CHsx1401, self-recombination and mutation in PAMs, MARC-145 cells, and pigs were assessed. In vitro, CHsx1401 displayed a higher frequency of recombination junctions and a greater diversity of junction types than JXwn06. In vivo, CHsx1401 exhibited fewer junction types yet maintained a higher junction frequency. Notably, JXwn06 showed more accumulation of mutations. To pinpoint the genomic regions influencing their fidelity, chimeric viruses were constructed, with the exchanged nsp9-10 regions between JXwn06 and CHsx1401. The SJn9n10 strain, which incorporates JXwn06's nsp9-10 into the CHsx1401 genome, demonstrated reduced sensitivity to nucleotide analogs compared to CHsx1401. Conversely, compared with JXwn06, the JSn9n10 strain showed increased sensitivity to these inhibitors. The swapped nsp9-10 also influences the junction frequency and accumulated mutations as their donor strains. The results indicate a propensity for different types of genetic variations between these two strains and further highlight the nsp9-10 region as a critical determinant of their fidelity.

Data normalization for addressing the challenges in the analysis of single-cell transcriptomic datasets

BACKGROUND

Normalization is a critical step in the analysis of single-cell RNA-sequencing (scRNA-seq) datasets. Its main goal is to make gene counts comparable within and between cells. To do so, normalization methods must account for technical and biological variability. Numerous normalization methods have been developed addressing different sources of dispersion and making specific assumptions about the count data.

MAIN BODY

The selection of a normalization method has a direct impact on downstream analysis, for example differential gene expression and cluster identification. Thus, the objective of this review is to guide the reader in making an informed decision on the most appropriate normalization method to use. To this aim, we first give an overview of the different single cell sequencing platforms and methods commonly used including isolation and library preparation protocols. Next, we discuss the inherent sources of variability of scRNA-seq datasets. We describe the categories of normalization methods and include examples of each. We also delineate imputation and batch-effect correction methods. Furthermore, we describe data-driven metrics commonly used to evaluate the performance of normalization methods. We also discuss common scRNA-seq methods and toolkits used for integrated data analysis.

CONCLUSIONS

According to the correction performed, normalization methods can be broadly classified as within and between-sample algorithms. Moreover, with respect to the mathematical model used, normalization methods can further be classified into: global scaling methods, generalized linear models, mixed methods, and machine learning-based methods. Each of these methods depict pros and cons and make different statistical assumptions. However, there is no better performing normalization method. Instead, metrics such as silhouette width, K-nearest neighbor batch-effect test, or Highly Variable Genes are recommended to assess the performance of normalization methods.

Decomposing bulk signals to reveal hidden information in processive enzyme reactions: A case study in mRNA translation

Processive enzymes like polymerases or ribosomes are often studied in bulk experiments by monitoring time-dependent signals, such as fluorescence time traces. However, due to biomolecular process stochasticity, ensemble signals may lack the distinct features of single-molecule signals. Here, we demonstrate that, under certain conditions, bulk signals from processive reactions can be decomposed to unveil hidden information about individual reaction steps. Using mRNA translation as a case study, we show that decomposing a noisy ensemble signal generated by the translation of mRNAs with more than a few codons is an ill-posed problem, addressable through Tikhonov regularization. We apply our method to the fluorescence signatures of in-vitro translated LepB mRNA and determine codon-position dependent translation rates and corresponding state-specific fluorescence intensities. We find a significant change in fluorescence intensity after the fourth and the fifth peptide bond formation, and show that both codon position and encoded amino acid have an effect on the elongation rate. This demonstrates that our approach enhances the information content extracted from bulk experiments, thereby expanding the range of these time- and cost-efficient methods.

Bacterial thermophilic DNA polymerases: A focus on prominent biotechnological applications

DNA polymerases are the enzymes able to replicate the genetic information in nucleic acid. As a result, they are necessary to copy the complete genome of every living creature before cell division and sustain the integrity of the genetic information throughout the life of each cell. Any organism that uses DNA as its genetic information, whether unicellular or multicellular, requires one or more thermostable DNA polymerases to thrive. Thermostable DNA polymerase is important in modern biotechnology and molecular biology because it results in methods such as DNA cloning, DNA sequencing, whole genome amplification, molecular diagnostics, polymerase chain reaction, synthetic biology, and single nucleotide polymorphism detection. There are at least 14 DNA-dependent DNA polymerases in the human genome, which is remarkable. These include the widely accepted, high-fidelity enzymes responsible for replicating the vast majority of genomic DNA and eight or more specialized DNA polymerases discovered in the last decade. The newly discovered polymerases' functions are still being elucidated. Still, one of its crucial tasks is to permit synthesis to resume despite the DNA damage that stops the progression of replication-fork. One of the primary areas of interest in the research field has been the quest for novel DNA polymerase since the unique features of each thermostable DNA polymerase may lead to the prospective creation of novel reagents. Furthermore, protein engineering strategies for generating mutant or artificial DNA polymerases have successfully generated potent DNA polymerases for various applications. In molecular biology, thermostable DNA polymerases are extremely useful for PCR-related methods. This article examines the role and importance of DNA polymerase in a variety of techniques.

Beyond the Lesion: Back to High Fidelity DNA Synthesis

High fidelity (HiFi) DNA polymerases (Pols) perform the bulk of DNA synthesis required to duplicate genomes in all forms of life. Their structural features, enzymatic mechanisms, and inherent properties are well-described over several decades of research. HiFi Pols are so accurate that they become stalled at sites of DNA damage or lesions that are not one of the four canonical DNA bases. Once stalled, the replisome becomes compromised and vulnerable to further DNA damage. One mechanism to relieve stalling is to recruit a translesion synthesis (TLS) Pol to rapidly synthesize over and past the damage. These TLS Pols have good specificities for the lesion but are less accurate when synthesizing opposite undamaged DNA, and so, mechanisms are needed to limit TLS Pol synthesis and recruit back a HiFi Pol to reestablish the replisome. The overall TLS process can be complicated with several cellular Pols, multifaceted protein contacts, and variable nucleotide incorporation kinetics all contributing to several discrete substitution (or template hand-off) steps. In this review, we highlight the mechanistic differences between distributive equilibrium exchange events and concerted contact-dependent switching by DNA Pols for insertion, extension, and resumption of high-fidelity synthesis beyond the lesion.

The Processivity of Telomerase: Insights from Kinetic Simulations and Analyses

Telomerases are moderately processive reverse transcriptases that use an integral RNA template to extend the 3' end of linear chromosomes. Processivity values, defined as the probability of extension rather than dissociation, range from about 0.7 to 0.99 at each step. Consequently, an average of tens to hundreds of nucleotides are incorporated before the single-stranded sDNA product dissociates. The RNA template includes a six nucleotide repeat, which must be reset in the active site via a series of translocation steps. Nucleotide addition associated with a translocation event shows a lower processivity (repeat addition processivity, RAP) than that at other positions (nucleotide addition processivity, NAP), giving rise to a characteristic strong band every 6th position when the product DNA is analyzed by gel electrophoresis. Here, we simulate basic reaction mechanisms and analyze the product concentrations using several standard procedures to show how the latter can give rise to systematic errors in the processivity estimate. Complete kinetic analysis of the time course of DNA product concentrations following a chase with excess unlabeled DNA primer (i.e., a pulse-chase experiment) provides the most rigorous approach. This analysis reveals that the higher product concentrations associated with RAP arise from a stalling of nucleotide incorporation reaction during translocation rather than an increased rate constant for the dissociation of DNA from the telomerase.

Lipoteichoic acid polymer length is determined by competition between free starter units

Carbohydrate polymers exhibit incredible chemical and structural diversity, yet are produced by polymerases without a template to guide length and composition. As the length of carbohydrate polymers is critical for their biological functions, understanding the mechanisms that determine polymer length is an important area of investigation. Most Gram-positive bacteria produce anionic glycopolymers called lipoteichoic acids (LTA) that are synthesized by lipoteichoic acid synthase (LtaS) on a diglucosyl-diacylglycerol (Glc₂DAG) starter unit embedded in the extracellular leaflet of the cell membrane. LtaS can use phosphatidylglycerol (PG) as an alternative starter unit, but PG-anchored LTA polymers are significantly longer, and cells that make these abnormally long polymers exhibit major defects in cell growth and division. To determine how LTA polymer length is controlled, we reconstituted Staphylococcus aureus LtaS in vitro. We show that polymer length is an intrinsic property of LtaS that is directly regulated by the identity and concentration of lipid starter units. Polymerization is processive, and the overall reaction rate is substantially faster for the preferred Glc₂DAG starter unit, yet the use of Glc₂DAG leads to shorter polymers. We propose a simple mechanism to explain this surprising result: free starter units terminate polymerization by displacing the lipid anchor of the growing polymer from its binding site on the enzyme. Because LtaS is conserved across most Gram-positive bacteria and is important for survival, this reconstituted system should be useful for characterizing inhibitors of this key cell envelope enzyme.

"Catch and Release": A Variation of the Archetypal Nucleotidyl Transfer Reaction

Nucleotidyl transfer is an archetypal enzyme reaction central to DNA replication and repair. Here we describe a variation of the nucleotidylation reaction termed "catch and release" that is used by an antibiotic modifying enzyme. The aminoglycoside nucleotidyl transferase 4' (ANT4') inactivates antibiotics such as kanamycin and neomycin through nucleotidylation within an active site that shares significant structural, and inferred underlying catalytic similarity, with human DNA polymerase beta. Here we follow the entire nucleotidyl transfer reaction coordinate of ANT4' covalently inactivating neomycin using X-ray crystallography. These studies show that although the underlying reaction mechanism is conserved with polymerases, a short 2.35 A hydrogen bond is initially formed to facilitate tight binding of the aminoglycoside substrate and is subsequently disrupted by the assembly of the catalytically active ternary complex. This enables the release of products post catalysis due to a lower free energy of the product state compared to the starting substrate complex. We propose that this "catch and release" mechanism of antibiotic turnover observed in ANT4' is a variation of nucleotidyl transfer that has been adapted for the inactivation of antibiotics.

Single-molecule imaging analysis reveals the mechanism of a high-catalytic-activity mutant of chitinase A from Serratia marcescens

Chitin degradation is important for biomass conversion and has potential applications for agriculture, biotechnology, and the pharmaceutical industry. Chitinase A from the Gram-negative bacterium Serratia marcescens (SmChiA) is a processive enzyme that hydrolyzes crystalline chitin as it moves linearly along the substrate surface. In a previous study, the catalytic activity of SmChiA against crystalline chitin was found to increase after the tryptophan substitution of two phenylalanine residues (F232W and F396W), located at the entrance and exit of the substrate binding cleft of the catalytic domain, respectively. However, the mechanism underlying this high catalytic activity remains elusive. In this study, single-molecule fluorescence imaging and high-speed atomic force microscopy were applied to understand the mechanism of this high-catalytic-activity mutant. A reaction scheme including processive catalysis was used to reproduce the properties of SmChiA WT and F232W/F396W, in which all of the kinetic parameters were experimentally determined. High activity of F232W/F396W mutant was caused by a high processivity and a low dissociation rate constant after productive binding. The turnover numbers for both WT and F232W/F396W, determined by the biochemical analysis, were well-replicated using the kinetic parameters obtained from single-molecule imaging analysis, indicating the validity of the reaction scheme. Furthermore, alignment of amino acid sequences of 258 SmChiA-like proteins revealed that tryptophan, not phenylalanine, is the predominant amino acid at the corresponding positions (Phe-232 and Phe-396 for SmChiA). Our study will be helpful for understanding the kinetic mechanisms and further improvement of crystalline chitin hydrolytic activity of SmChiA mutants.

Two Approaches to Enhance the Processivity and Salt Tolerance of Staphylococcus aureus DNA Polymerase

In this article, two engineering-strategies were carried out to enhance the processivity of the DNA polymerase used in recombinase polymerase amplification (RPA). We demonstrate that covalent linkage of a non-specific, double-stranded DNA binding protein, Sso7d, to the large fragment of Staphylococcus aureus Pol I (Sau) caused a moderate enhancement of processivity and a significant improvement in the salt tolerance of Sau. Meanwhile, we provide evidence suggesting that insertion of the thioredoxin-binding domain from bacteriophage T7 DNA polymerase into the analogous position of the large fragment of Sau dramatically enhanced the processivity and mildly increased the salt tolerance of Sau when a host DNA binding protein, thioredoxin, was annexed. Both of these two strategies did not improve the amplifying performance of Sau in RPA, indicating that optimum processivity is crucial for amplifying efficiency.

Coordination and Substitution of DNA Polymerases in Response to Genomic Obstacles

The ability for DNA polymerases (Pols) to overcome a variety of obstacles in its path to maintain genomic stability during replication is a complex endeavor. It requires the coordination of multiple Pols with differing specificities through molecular control and access to the replisome. Although a number of contacts directly between Pols and accessory proteins have been identified, forming the basis of a variety of holoenzyme complexes, the dynamics of Pol active site substitutions remain uncharacterized. Substitutions can occur externally by recruiting new Pols to replisome complexes through an "exchange" of enzyme binding or internally through a "switch" in the engagement of DNA from preformed associated enzymes contained within supraholoenzyme complexes. Models for how high fidelity (HiFi) replication Pols can be substituted by translesion synthesis (TLS) Pols at sites of damage during active replication will be discussed. These substitution mechanisms may be as diverse as the number of Pol families and types of damage; however, common themes can be recognized across species. Overall, Pol substitutions will be controlled by explicit protein contacts, complex multiequilibrium processes, and specific kinetic activities. Insight into how these dynamic processes take place and are regulated will be of utmost importance for our greater understanding of the specifics of TLS as well as providing for future novel chemotherapeutic and antimicrobial strategies.

Analyzing the Catalytic Activities and Interactions of Eukaryotic Translesion Synthesis Polymerases

Translesion synthesis is the process by which nonclassical DNA polymerases bypass DNA damage during DNA replication. Cells possess a variety of nonclassical polymerases, each one is specific for incorporating nucleotides opposite to one or more closely related DNA lesions, called its cognate lesions. In this chapter, we discuss a variety of approaches for probing the catalytic activities and the protein-protein interactions of nonclassical polymerases. With respect to their catalytic activities, we discuss polymerase assays, steady-state kinetics, and presteady-state kinetics. With respect to their interactions, we discuss qualitative binding assays such as enzyme-linked immunosorbent assays and coimmunoprecipitation; quantitative binding assays such as isothermal titration calorimetry, surface plasmon resonance, and nuclear magnetic resonance spectroscopy; and single-molecule binding assays such as total internal reflection fluorescence microscopy. We focus on how nonclassical polymerases accommodate their cognate lesions during nucleotide incorporation and how the most appropriate nonclassical polymerase is selected for bypassing a given lesion.

Modeling Enzyme Processivity Reveals that RNA-Seq Libraries Are Biased in Characteristic and Correctable Ways

Experimental procedures for preparing RNA-seq and single-cell (sc) RNA-seq libraries are based on assumptions regarding their underlying enzymatic reactions. Here, we show that the fairness of these assumptions varies within libraries: coverage by sequencing reads along and between transcripts exhibits characteristic, protocol-dependent biases. To understand the mechanistic basis of this bias, we present an integrated modeling framework that infers the relationship between enzyme reactions during library preparation and the characteristic coverage patterns observed for different protocols. Analysis of new and existing (sc)RNA-seq data from six different library preparation protocols reveals that polymerase processivity is the mechanistic origin of coverage biases. We apply our framework to demonstrate that lowering incubation temperature increases processivity, yield, and (sc)RNA-seq sensitivity in all protocols. We also provide correction factors based on our model for increasing accuracy of transcript quantification in existing samples prepared at standard temperatures. In total, our findings improve our ability to accurately reflect in vivo transcript abundances in (sc)RNA-seq libraries.

•

Characterization of global RNA-seq biases specific to library preparation protocols

•

Mathematical framework to reverse engineer enzyme reactions that cause bias

•

Insights from reverse engineering allow optimization of RNA-seq protocols

•

Lowered incubation temperatures during library preparation improve sensitivity

Mutations in the palm subdomain of Twa DNA polymerase to enhance PCR efficiency and its function analysis

Among the family B DNA polymerases, the Twa DNA polymerase from T. wiotapuensis, a hyperthermophilic archaeon, has exceedingly high fidelity. For applications in PCR, however, the enzyme is limited by its low extension rate and processivity. To resolve these weaknesses, we focused on two amino acid residues (A381 and N501) located at the palm subdomain of Twa DNA polymerase. Following replacement of these residues by site-directed mutagenesis, Twa N501R DNA polymerase showed significantly improved polymerase function compared to the wild-type enzyme in terms of processivity (3-fold), extension rate (2-fold) and PCR efficiency. Kinetic analysis using DNA as template revealed that the kcat value of the Twa N501R mutant was similar to that of wild-type, but the Km of the Twa N501R mutant was about 1.5-fold lower than that of the wild-type. These results suggest that a positive charge at residue 501 located in the forked-point does not impede catalytic activity of the polymerase domain but stabilizes interactions between the polymerase domain and the DNA template.

Enhanced PCR efficiency of high-fidelity DNA polymerase from Thermococcus waiotapuensis

Twa DNA polymerase from hyperthermophilic archaeon Thermococcus waiotapuensis has exceedingly high fidelity among family B DNA polymerases. However, Twa DNA polymerase has significant shortcomings in terms of a low extension rate and poor processivity. To resolve these weaknesses, we focused on two amino acid residues (N565 and H633) in the palm and thumb subdomains of the Twa DNA polymerase. These two residues were replaced by site-directed mutagenesis and the enzymatic properties of the mutants were analyzed. Here, Twa H633R DNA polymerase showed significantly improved polymerase function compared to wild-type Twa DNA polymerase in terms of processivity (2-fold), extension rate (1.5-fold) and PCR efficiency. Kinetic analysis using DNA as a template revealed that the kcat value of the Twa H633R mutant was similar to that of wild-type, but the Km of the Twa H633R mutant was about 1.6-fold lower than that of the wild-type. These results showed that the Arg residue substitution at H633 located in the thumb subdomain has a positive effect on processivity, extension rate and PCR efficiency, suggesting that the Twa H633R mutant allows a conformational change for easy access of the primer-template to the binding site of the polymerase domain.

DNA polymerase hybrids derived from the family-B enzymes of Pyrococcus furiosus and Thermococcus kodakarensis: improving performance in the polymerase chain reaction

The polymerase chain reaction (PCR) is widely applied across the biosciences, with archaeal Family-B DNA polymerases being preferred, due to their high thermostability and fidelity. The enzyme from Pyrococcus furiosus (Pfu-Pol) is more frequently used than the similar protein from Thermococcus kodakarensis (Tkod-Pol), despite the latter having better PCR performance. Here the two polymerases have been comprehensively compared, confirming that Tkod-Pol: (1) extends primer-templates more rapidly; (2) has higher processivity; (3) demonstrates superior performance in normal and real time PCR. However, Tkod-Pol is less thermostable than Pfu-Pol and both enzymes have equal fidelities. To understand the favorable properties of Tkod-Pol, hybrid proteins have been prepared. Single, double and triple mutations were used to site arginines, present at the “forked-point” (the junction of the exonuclease and polymerase channels) of Tkod-Pol, at the corresponding locations in Pfu-Pol, slightly improving PCR performance. The Pfu-Pol thumb domain, responsible for double-stranded DNA binding, has been entirely replaced with that from Tkod-Pol, again giving better PCR properties. Combining the “forked-point” and thumb swap mutations resulted in a marked increase in PCR capability, maintenance of high fidelity and retention of the superior thermostability associated with Pfu-Pol. However, even the arginine/thumb swap mutant falls short of Tkod-Pol in PCR, suggesting further improvement within the Pfu-Pol framework is attainable. The significance of this work is the observation that improvements in PCR performance are easily attainable by blending elements from closely related archaeal polymerases, an approach that may, in future, be extended by using more polymerases from these organisms.

Engineering the product profile of a polysialyltransferase

Oligo- and polysaccharides have myriad applications as therapeutic reagents from glycoconjugate vaccines to matrices for tissue engineering. Polysaccharide length may vary over several orders of magnitude and is a critical determinant of both their physical properties and biological activities. Therefore, the tailored synthesis of oligo- and polysaccharides of defined size is a major goal for glycoengineering. By mutagenesis and screening of a bacterial polysialyltransferase (polyST), we identified a single-residue switch that controls the size distribution of polymeric products. Specific substitutions at this site yielded distributive enzymes that synthesize polysaccharides with narrow size distribution ideal for glycoengineering applications. Mechanistic investigation revealed that the wild-type enzyme has an extended binding site that accommodates at least 20 residues of the growing polymer; changes in affinity along this binding site allow fine-tuning of the enzyme's product distribution.

Assembly and distributive action of an archaeal DNA polymerase holoenzyme

The assembly and enzymatic ability of the replication DNA polymerase holoenzyme from Sulfolobus solfataricus (Sso) was investigated using presteady-state fluorescence resonance energy transfer assays coupled with functional and structural studies. Kinetic experiments reveal that ATP binding to replication factor C (RFC) is sufficient for loading the heterotrimeric PCNA123 [proliferating cell nuclear antigen (PCNA)] clamp onto DNA that includes a rate-limiting conformational rearrangement of the complex. ATP hydrolysis is required for favorable recruitment and interactions with the replication polymerase (PolB1) that most likely include clamp closing and RFC dissociation. Surprisingly, the assembled holoenzyme complex synthesizes DNA distributively and with low processivity, unlike most other well-characterized DNA polymerase holoenzyme complexes. We show that PolB1 repeatedly disengages from the DNA template, leaving PCNA123 behind. Interactions with a newly identified C-terminal PCNA-interacting peptide (PIP) motif on PolB1 specifically with PCNA2 are required for holoenzyme formation and continuous re-recruitment during synthesis. The extended tail-like structure of the C-terminal PIP motif in PolB1 is revealed alone and when bound to DNA using small-angle X-ray scattering allowing us to develop a model for the holoenzyme complex. This is the first detailed kinetic description of clamp loading and holoenzyme assembly in crenarchaea and has revealed a novel mode for dynamic processivity that occurs by a polymerase exchange mechanism. This work has important implications for processive DNA replication synthesis and also suggests a potential mechanism for polymerase switching to bypass lesions.

α-Complementation in an artificial genome replication system in liposomes

Genome size is considered one of the limiting factors for the replication of primitive life forms. However, the relationship between genome size and replication efficiency has not been tested experimentally. In this study, we examined the effect of genome size on genome replication by using an artificial cell model: a self-replicating RNA genome encapsulated in a liposome. For the reduced genome size we used α-complementation of the lacZ gene. We first characterized α-complementation in the purified translation system and then applied α-complementation to the genome replication system. The reduction in the genome size together with the addition of ω-fragment increased the replication efficiency approximately eightfold. This result provides experimental evidence that genome size can be a limiting factor for primitive self-replication systems; it also implies that this artificial cell model could be a useful experimental model to identify possible mechanisms of genome enlargement.

Methods, Challenges and Potentials of Single Cell RNA-seq

RNA-sequencing (RNA-seq) has become the tool of choice for transcriptomics. Several recent studies demonstrate its successful adaption to single cell analysis. This allows new biological insights into cell differentiation, cell-to-cell variation and gene regulation, and how these aspects depend on each other. Here, I review the current single cell RNA-seq (scRNA-seq) efforts and discuss experimental protocols, challenges and potentials.

Accurate and efficient bypass of 8,5'-cyclopurine-2'-deoxynucleosides by human and yeast DNA polymerase η

Reactive oxygen species (ROS), which can be produced during normal aerobic metabolism, can induce the formation of tandem DNA lesions, including 8,5'-cyclo-2'-deoxyadenosine (cyclo-dA) and 8,5'-cyclo-2'-deoxyguanosine (cyclo-dG). Previous studies have shown that cyclo-dA and cyclo-dG accumulate in cells and can block mammalian RNA polymerase II and replicative DNA polymerases. Here, we used primer extension and steady-state kinetic assays to examine the efficiency and fidelity for polymerase η to insert nucleotides opposite, and extend primer past, these cyclopurine lesions. We found that Saccharomyces cerevisiae and human polymerase η inserted 2'-deoxynucleotides opposite cyclo-dA, cyclo-dG and their adjacent 5' nucleosides at fidelities and efficiencies that were similar to those of their respective undamaged nucleosides. Moreover, the yeast enzyme exhibited similar processivity in DNA synthesis on templates housing a cyclo-dA or cyclo-dG to those carrying an unmodified dA or dG; the human polymerase, however, dissociated from the primer-template complex after inserting one or two additional nucleotides after the lesion. Pol η's accurate and efficient bypass of cyclo-dA and cyclo-dG indicates that this polymerase is likely responsible for error-free bypass of these lesions, whereas mutagenic bypass of these lesions may involve other translesion synthesis DNA polymerases. Together, our results suggested that pol η may have an additional function in cells, i.e., to alleviate the cellular burden of endogenously induced DNA lesions, including cyclo-dA and cyclo-dG.

A processive carbohydrate polymerase that mediates bifunctional catalysis using a single active site

Even in the absence of a template, glycosyltransferases can catalyze the synthesis of carbohydrate polymers of specific sequence. The paradigm has been that one enzyme catalyzes the formation of one type of glycosidic linkage, yet certain glycosyltransferases generate polysaccharide sequences composed of two distinct linkage types. In principle, bifunctional glycosyltransferases can possess separate active sites for each catalytic activity or one active site with dual activities. We encountered the fundamental question of one or two distinct active sites in our investigation of the galactosyltransferase GlfT2. GlfT2 catalyzes the formation of mycobacterial galactan, a critical cell-wall polymer composed of galactofuranose residues connected with alternating, regioisomeric linkages. We found that GlfT2 mediates galactan polymerization using only one active site that manifests dual regioselectivity. Structural modeling of the bifunctional glycosyltransferases hyaluronan synthase and cellulose synthase suggests that these enzymes also generate multiple glycosidic linkages using a single active site. These results highlight the versatility of glycosyltransferases for generating polysaccharides of specific sequence. We postulate that a hallmark of processive elongation of a carbohydrate polymer by a bifunctional enzyme is that one active site can give rise to two separate types of glycosidic bonds.

Monitoring processivity and length control of a carbohydrate polymerase

Carbohydrate polymerases are abundant in nature. Although they play vital physiological roles, the molecular mechanisms that they use for the controlled assembly of polymers are largely unknown. One fundamental issue is whether an enzyme utilizes a processive or distributive mechanism for chain elongation. The shortage of mechanistic information on polysaccharide-generating glycosyltransferases became apparent when we sought to carry out investigations of GlfT2, a glycosyltransferase essential for cell wall biosynthesis in Mycobacterium tuberculosis. GlfT2 catalyzes the formation of the cell wall galactan, which is a linear polysaccharide consisting of 20-40 repeating d-galactofuranose (Galf) residues. Recombinant GlfT2 can act on synthetic acceptors to produce polymers with lengths similar to those of endogenous galactan, indicating that GlfT2 has an intrinsic ability to control polymer length. To address whether GlfT2 utilizes a processive or distributive mechanism, we developed a mass spectrometry assay. Our approach, which relies on acceptors labeled with stable isotopes, provides direct evidence that GlfT2 is a processive polymerase that maintains contact with the glycan substrate through successive monomer additions. Given this finding, we probed further the catalytic mechanism of GlfT2 to address the basis of an observed kinetic lag phase. These studies suggest that GlfT2 possesses subsites for Galf residue binding and that substrates that can fill these subsites undergo efficient processive polymerization. The presence of these subsites and the kinetic lag phase are common features of processive enzymes. We anticipate that the strategies described herein can be applied to mechanistic studies of other carbohydrate polymerization reactions.

Why do RNA viruses recombine?

Recombination occurs in many RNA viruses and can be of major evolutionary significance. However, rates of recombination vary dramatically among RNA viruses, which can range from clonal to highly recombinogenic. Here, we review the factors that might explain this variation in recombination frequency and show that there is little evidence that recombination is favoured by natural selection to create advantageous genotypes or purge deleterious mutations, as predicted if recombination functions as a form of sexual reproduction. Rather, recombination rates seemingly reflect larger-scale patterns of viral genome organization, such that recombination may be a mechanistic by-product of the evolutionary pressures acting on other aspects of virus biology.

An electrochemical assay of beta-1,3-glucanase gene from transgenic capsicum using asymmetric PCR

5'-Thiol-derivatized specific DNA probes were added to the single primer polymerase chain reaction (asymmetric PCR) solution. In the PCR process, the DNA probes extended in the presence of target; the extended probes were then immobilized on a glassy carbon electrode (GCE) via gold nanoparticles. Finally, methylene blue and the extended probes were combined and the electrochemical signals were measured. This signal was higher than that of the GCE modified only by the original probe. When there was no target in PCR solution, the probe did not extend and the signal did not increase. The specific sequences of the beta-1,3-glucanase gene were detected successfully from three targets with different length: oligonucleotide, molecule clone vector DNA, and total genome DNA of transgenic capsicum. The detection limits of 2.6 x 10(-13), 7.8 x 10(-13), and 9.1 x 10(-13) moll(-1) for oligonucleotide, molecule clone vector DNA, and total transgenic capsicum genome DNA were estimated.

Conformational dynamics of bacteriophage T7 DNA polymerase and its processivity factor, Escherichia coli thioredoxin

Gene 5 of bacteriophage T7 encodes a DNA polymerase (gp5) responsible for the replication of the phage DNA. Gp5 polymerizes nucleotides with low processivity, dissociating after the incorporation of 1 to 50 nucleotides. Thioredoxin (trx) of Escherichia coli binds tightly (Kd = 5 nM) to a unique segment in the thumb subdomain of gp5 and increases processivity. We have probed the molecular basis for the increase in processivity. A single-molecule experiment reveals differences in rates of enzymatic activity and processivity between gp5 and gp5/trx. Small angle X-ray scattering studies combined with nuclease footprinting reveal two conformations of gp5, one in the free state and one upon binding to trx. Comparative analysis of the DNA binding clefts of DNA polymerases and DNA binding proteins show that the binding surface contains more hydrophobic residues than other DNA binding proteins. The balanced composition between hydrophobic and charged residues of the binding site allows for efficient sliding of gp5/trx on the DNA. We propose a model for trx-induced conformational changes in gp5 that enhance the processivity by increasing the interaction of gp5 with DNA.

A trimeric DNA polymerase complex increases the native replication processivity

DNA polymerases are essential enzymes in all domains of life for both DNA replication and repair. The primary DNA replication polymerase from Sulfolobus solfataricus (SsoDpo1) has been shown previously to provide the necessary polymerization speed and exonuclease activity to replicate the genome accurately. We find that this polymerase is able to physically associate with itself to form a trimer and that this complex is stabilized in the presence of DNA. Analytical gel filtration and electrophoretic mobility shift assays establish that initially a single DNA polymerase binds to DNA followed by the cooperative binding of two additional molecules of the polymerase at higher concentrations of the enzyme. Protein chemical crosslinking experiments show that these are specific polymerase–polymerase interactions and not just separate binding events along DNA. Isothermal titration calorimetry and fluorescence anisotropy experiments corroborate these findings and show a stoichiometry where three polymerases are bound to a single DNA substrate. The trimeric polymerase complex significantly increases both the DNA synthesis rate and the processivity of SsoDpo1. Taken together, these results suggest the presence of a trimeric DNA polymerase complex that is able to synthesize long DNA strands more efficiently than the monomeric form.

The noncellulosomal family 48 cellobiohydrolase from Clostridium phytofermentans ISDg: heterologous expression, characterization, and processivity

Family 48 glycoside hydrolases (cellobiohydrolases) are among the most important cellulase components for crystalline cellulose hydrolysis mediated by cellulolytic bacteria. Open reading frame (Cphy_3368) of Clostridium phytofermentans ISDg encodes a putative family 48 glycoside hydrolase (CpCel48) with a family 3 cellulose-binding module. CpCel48 was successfully expressed as two soluble intracellular forms with or without a C-terminal His-tag in Escherichia coli and as a secretory active form in Bacillus subtilis. It was found that calcium ion enhanced activity and thermostability of the enzyme. CpCel48 had high activities of 15.1 U micromol(-1) on Avicel and 35.9 U micromol(-1) on regenerated amorphous cellulose (RAC) with cellobiose as a main product and cellotriose and cellotetraose as by-products. By contrast, it had very weak activities on soluble cellulose derivatives (e.g., carboxymethyl cellulose (CMC)) and did not significantly decrease the viscosity of the CMC solution. Cellotetraose was the smallest oligosaccharide substrate for CpCel48. Since processivity is a key characteristic for cellobiohydrolases, the new initial false/right attack model was developed for estimation of processivity by considering the enzyme's substrate specificity, the crystalline structure of homologous Cel48 enzymes, and the configuration of cellulose chains. The processivities of CpCel48 on Avicel and RAC were estimated to be approximately 3.5 and 6.0, respectively. Heterologous expression of secretory active cellobiohydrolase in B. subtilis is an important step for developing recombinant cellulolytic B. subtilis strains for low-cost production of advanced biofuels from cellulosic materials in a single step.

Escherichia coli DNA adenine methyltransferase: the structural basis of processive catalysis and indirect read-out

We have investigated the structural basis of processive GATC methylation by the Escherichia coli DNA adenine methyltransferase, which is critical in chromosome replication and mismatch repair. We determined the contribution of the orthologically conserved phosphate interactions involving residues Arg(95), Asn(126), Asn(132), Arg(116), and Lys(139), which directly contact the DNA outside the cognate recognition site (GATC) to processive catalysis, and that of residue Arg(137), which is not conserved and contacts the DNA backbone within the GATC sequence. Alanine substitutions at the conserved positions have large impacts on processivity yet do not impact k(cat)/K(m)(DNA) or DNA affinity (K(D)(DNA)). However, these mutants cause large preferences for GATC sites varying in flanking sequences when considering the pre-steady state efficiency constant k(chem)/K(D)(DNA). These changes occur mainly at the level of the methylation rate constant, which results in the observed decreases in processive catalysis. Thus, processivity and catalytic efficiency (k(cat)/K(m)(DNA)) are uncoupled in these mutants. These results reveal that the binding energy involved in DNA recognition contributes to the assembly of the active site rather than tight binding. Furthermore, the conserved residues (Arg(95), Asn(126), Asn(132), and Arg(116)) repress the modulation of the response of the enzyme to flanking sequence effects. Processivity impacted mutants do not show substrate-induced dimerization as is observed for the wild type enzyme. This study describes the structural means by which an enzyme that does not completely enclose its substrate has evolved to achieve processive catalysis, and how interactions with DNA flanking the recognition site alter this processivity.

A tethering mechanism for length control in a processive carbohydrate polymerization

Carbohydrate polymers are the most abundant organic substances on earth. Their degrees of polymerization range from tens to thousands of units, yet polymerases generate the relevant lengths without the aid of a template. To gain insight into template-independent length control, we investigated how the mycobacterial galactofuranosyl-transferase GlfT2 mediates formation of the galactan, a polymer of galactofuranose residues that is an integral part of the cell wall. We show that isolated recombinant GlfT2 can catalyze the synthesis of polymers with degrees of polymerization that are commensurate with values observed in mycobacteria, indicating that length control by GlfT2 is intrinsic. Investigations using synthetic substrates reveal that GlfT2 is processive. The data indicate that GlfT2 controls length by using a substrate tether, which is distal from the site of elongation. The strength of interaction of that tether with the polymerase influences the length of the resultant polymer. Thus, our data identify a mechanism for length control by a template-independent polymerase.

Characterization of a dUTPase from the hyperthermophilic archaeon Thermococcus onnurineus NA1 and its application in polymerase chain reaction amplification

Genomic analysis of the hyperthermophilic archaeon Thermococcus onnurineus NA1 (TNA1) revealed the presence of a 471-bp open reading frame with 93% similarity to the dUTPase from Pyrococcus furiosus. The dUTPase-encoding gene was cloned and expressed in Escherichia coli. The purified protein hydrolyzed dUTP at about a 10-fold higher rate than dCTP. The protein behaved as a dimer in gel filtration chromatography, even though it contains five motifs that are conserved in all homotrimeric dUTPases. The dUTPase showed optimum activity at 80 degrees C and pH 8.0, and it was highly thermostable with a half-life (t (1/2)) of 170 min at 95 degrees C. The enzymatic activity of the dUTPase was largely unaffected by variations in MgCl(2), KCl, (NH(4))(2)SO(4), and Triton X-100 concentrations, although it was reduced by bovine serum albumin. Addition of the dUTPase to polymerase chain reactions (PCRs) run with TNA1 DNA polymerase significantly increased product yield, overcoming the inhibitory effect of dUTP. Further, addition of the dUTPase allowed PCR amplification of targets up to 15 kb in length using TNA1 DNA polymerase. This enzyme also improved the PCR efficiency of other archaeal family B type DNA polymerases, including Pfu and KOD.

Expression and characterization of a novel reverse transcriptase of the LTR retrotransposon Tf1

The LTR retrotransposon of Schizosacharomyces pombe, Tf1, has several distinctive properties that can be related to the unique properties of its reverse transcriptase (RT). Consequently, we expressed, purified and studied the recombinant Tf1 RT. This monomeric protein possesses all activities typical to RTs: DNA and RNA-dependent DNA polymerase as well as an inherent ribonuclease H. The DNA polymerase activity shows preference to Mn(+)(2) or Mg(+)(2), depending on the substrate used, whereas the ribonuclease H strongly prefers Mn(+)(2). The most outstanding feature of Tf1 RT is its capacity to add non-templated nucleotides to the 3'-ends of the nascent DNA. This is mainly apparent in the presence of Mn(+)(2), as is the noticeable low fidelity of DNA synthesis. In all, Tf1 RT has a marked infidelity in synthesizing DNA at template ends, a phenomenon that can explain, as discussed herein, some of the features of Tf1 replication in the host cells.

Structure and enzymatic properties of a chimeric bacteriophage RB69 DNA polymerase and single-stranded DNA binding protein with increased processivity

In vivo, replicative DNA polymerases are made more processive by their interactions with accessory proteins at the replication fork. Single-stranded DNA binding protein (SSB) is an essential protein that binds tightly and cooperatively to single-stranded DNA during replication to remove adventitious secondary structures and protect the exposed DNA from endogenous nucleases. Using information from high resolution structures and biochemical data, we have engineered a functional chimeric enzyme of the bacteriophage RB69 DNA polymerase and SSB with substantially increased processivity. Fusion of RB69 DNA polymerase with its cognate SSB via a short six amino acid linker increases affinity for primer-template DNA by sixfold and subsequently increases processivity by sevenfold while maintaining fidelity. The crystal structure of this fusion protein was solved by a combination of multiwavelength anomalous diffraction and molecular replacement to 3.2 A resolution and shows that RB69 SSB is positioned proximal to the N-terminal domain of RB69 DNA polymerase near the template strand channel. The structural and biochemical data suggest that SSB interactions with DNA polymerase are transient and flexible, consistent with models of a dynamic replisome during elongation.

Visualization of Rad54, a chromatin remodeling protein, translocating on single DNA molecules

Rad54 protein plays an important role in the recombinational repair of double-strand DNA (dsDNA) breaks. It is a dsDNA-dependent ATPase that belongs to the Swi2/Snf2 family of chromatin-remodeling proteins. Rad54 remodels (1) DNA structure, (2) chromatin structure, and (3) Rad51-dsDNA complexes. These abilities imply that Rad54 moves along DNA. Here, we provide direct evidence of Rad54 translocation by visualizing its movement along single molecules of dsDNA. When compared to the remodeling processes, translocation is unexpectedly rapid, occurring at 301 +/- 22 bp/s at 25 degrees C. Rad54 binds randomly along the dsDNA and moves in either of the two possible directions with a velocity dependent on ATP concentration (K(m) = 97 +/- 28 microM). Movement is also surprisingly processive: the average distance traveled is approximately 11,500 bp, with molecules traversing up to 32,000 bp before stopping. The mechanistic implications of this vigorous Rad54 translocase activity in chromatin and protein-DNA complex remodeling are discussed.

The catalytic properties of the recombinant reverse transcriptase of bovine immunodeficiency virus

Bovine immunodeficiency virus (BIV) is a lentivirus with no proven pathogenesis in infected cattle. Yet, in experimentally infected rabbits, it causes an AIDS-like disease. Consequently, we expressed two recombinant isoforms of BIV reverse transcriptase (RT), which differ in their C-termini, and studied their catalytic properties. Both isoforms prefer Mg(+2) over Mn(+2) with most DNA polymerase and ribonuclease-H substrates. The processivity of DNA synthesis by the BIV RTs is higher than that of HIV-1 RT, whereas the fidelity of synthesis is even lower than that of the HIV-1 enzyme. The ribonuclease-H cleavage pattern suggests that the spatial distance between the polymerase and ribonuclease-H active sites of the two BIV RT isoforms equals 20 nt, unlike the 17 nt distance observed in almost all other RTs. The longer BIV RT version is somewhat less active than the shorter version, suggesting that the extra 74 residues (with homology to dUTPases) might obstruct efficient catalysis.

Mechanism of action of theendo-(1 → 3)-α-glucanase MutAp from the mycoparasitic fungusTrichoderma harzianum

(1-->3)-alpha-glucanases catalyze the hydrolysis of fungal cell wall (1-->3)-alpha-glucan, and function during cell division of yeasts containing this cell wall component or act in mycoparasitic processes. Here, we characterize the mechanism of action of the (1-->3)-alpha-glucanase MutAp from the mycoparasitic fungus Trichoderma harzianum. We observed that MutAp releases predominantly beta-glucose upon hydrolysis of crystalline (1-->3)-alpha-glucan, indicating inversion of the anomeric configuration. After having identified (1-->3)-alpha-glucan tetrasaccharide as the minimal substrate for MutAp, we showed that reduced (1-->3)-alpha-glucan pentasaccharide is cleaved into a trisaccharide and a reduced disaccharide, demonstrating that MutAp displays endo-hydrolytic activity. We propose a model for the catalytic mechanism of MutAp, whereby the enzyme breaks an intrachain glycosidic linkage of (1-->3)-alpha-glucan, and then continues its hydrolysis towards the non-reducing end by releasing beta-glucose residues in a processive manner.

A UbcH5/ubiquitin noncovalent complex is required for processive BRCA1-directed ubiquitination

Protein ubiquitination is a powerful regulatory modification that influences nearly every aspect of eukaryotic cell biology. The general pathway for ubiquitin (Ub) modification requires the sequential activities of a Ub-activating enzyme (E1), a Ub transfer enzyme (E2), and a Ub ligase (E3). The E2 must recognize both the E1 and a cognate E3 in addition to carrying activated Ub. These central functions are performed by a topologically conserved alpha/beta-fold core domain of approximately 150 residues shared by all E2s. However, as presented herein, the UbcH5 family of E2s can also bind Ub noncovalently on a surface well removed from the E2 active site. We present the solution structure of the UbcH5c/Ub noncovalent complex and demonstrate that this noncovalent interaction permits self-assembly of activated UbcH5c approximately Ub molecules. Self-assembly has profound consequences for the processive formation of polyubiquitin (poly-Ub) chains in ubiquitination reactions directed by the breast and ovarian cancer tumor susceptibility protein BRCA1.

The highly processive DNA polymerase of bacteriophage T5. Role of the unique N and C termini

The DNA polymerase encoded by bacteriophage T5 has been reported previously to be processive and to catalyze extensive strand displacement synthesis. The enzyme, purified from phage-infected cells, did not require accessory proteins for these activities. Although T5 DNA polymerase shares extensive sequence homology with Escherichia coli DNA polymerase I and T7 DNA polymerase, it contains unique regions of 130 and 71 residues at its N and C termini, respectively. We cloned the gene encoding wild-type T5 DNA polymerase and characterized the overproduced protein. We also examined the effect of N- and C-terminal deletions on processivity and strand displacement synthesis. T5 DNA polymerase lacking its N-terminal 30 residues resembled the wild-type enzyme albeit with a 2-fold reduction in polymerase activity. Deletion of 24 residues at the C terminus resulted in a 30-fold reduction in polymerase activity on primed circular DNA, had dramatically reduced processivity, and was unable to carry out strand displacement synthesis. Deletion of 63 residues at the C terminus resulted in a 20,000-fold reduction in polymerase activity. The 3' to 5' double-stranded DNA exonuclease activity associated with T5 DNA polymerase was reduced by a factor of 5 in the polymerase truncated at the N terminus but was stimulated by a factor of 7 in the polymerase truncated at the C terminus. We propose a model in which the C terminus increases the affinity of the DNA for the polymerase active site, thus increasing processivity and decreasing the accessibility of the DNA to the exonuclease active site.

Unique roles of the rrn P2 rRNA promoters in Escherichia coli

In bacteria, genes are often expressed from multiple promoters to allow for a greater spectrum of regulation. Transcription of rRNA genes in Escherichia coli uses two promoters, rrn P1 and rrn P2. Under the conditions examined previously, the P1 and P2 promoters were regulated in response to many of the same changes in nutritional conditions. We report here that rrn P2 promoters play unique roles in rRNA expression during transitional situations. rrn P2 promoters play a dominant role in rRNA synthesis as cells enter into and persist in stationary phase. rrn P2 promoters also play a role in the rapid increases in rRNA synthesis that occur during outgrowth from stationary phase and during the initial stages of rapid shifts to richer media. We demonstrate that rrnB P2 directly senses the concentrations of guanosine 5'-disphosphate 3'-diphosphate (ppGpp) and the initiating nucleoside triphosphate (iNTP), thereby accounting, at least in part, for the observed patterns of regulation. Our work significantly extends previous information about the regulators responsible for control of the rrn P2 promoters and the relationship between the tandem rRNA promoters.