DNA-directed mutations. Leading and lagging strand specificity

Computationally derived RNA polymerase III promoters enable maize genome editing

CRISPR endonucleases require cognate non-coding RNA species for site-specific activity. These RNA species are typically expressed using endogenous RNA polymerase III (Pol III) promoters compatible with the host species. This study describes applications of novel Pol III promoters, which were computationally derived from a training set of monocot U6 and U3 promoters. These promoters enabled genome editing in maize protoplast cells and maize plants. Out of 37 novel promoters, 27 performed similarly to a control U6 promoter. Multiplexing five novel promoters in one construct enabled simultaneous editing of the maize genome at 27 unique sites in a single plant. Moreover, repeating the same CRISPR RNA (crRNA) with multiple novel promoters improved editing up to three-fold at a low-efficiency target site in maize plants. The ability to computationally derive novel Pol III promoters on-demand increases genome editing flexibility and efficiency in maize.

Bacillus subtilis stress-associated mutagenesis and developmental DNA repair

SUMMARYThe metabolic conditions that prevail during bacterial growth have evolved with the faithful operation of repair systems that recognize and eliminate DNA lesions caused by intracellular and exogenous agents. This idea is supported by the low rate of spontaneous mutations (10-9) that occur in replicating cells, maintaining genome integrity. In contrast, when growth and/or replication cease, bacteria frequently process DNA lesions in an error-prone manner. DNA repairs provide cells with the tools needed for maintaining homeostasis during stressful conditions and depend on the developmental context in which repair events occur. Thus, different physiological scenarios can be anticipated. In nutritionally stressed bacteria, different components of the base excision repair pathway may process damaged DNA in an error-prone approach, promoting genetic variability. Interestingly, suppressing the mismatch repair machinery and activating specific DNA glycosylases promote stationary-phase mutations. Current evidence also suggests that in resting cells, coupling repair processes to actively transcribed genes may promote multiple genetic transactions that are advantageous for stressed cells. DNA repair during sporulation is of interest as a model to understand how transcriptional processes influence the formation of mutations in conditions where replication is halted. Current reports indicate that transcriptional coupling repair-dependent and -independent processes operate in differentiating cells to process spontaneous and induced DNA damage and that error-prone synthesis of DNA is involved in these events. These and other noncanonical ways of DNA repair that contribute to mutagenesis, survival, and evolution are reviewed in this manuscript.

Excision of unstable artificial gene-specific inverted repeats mediates scar-free gene deletions in Escherichia coli

Inverted repeat and palindromic sequences have the propensity to form non-beta cruciform structures during DNA replication, leading to perturbations within the genome or plasmid replicon. In this study, the tolerance of the Escherichia coli genome to inverted repeat sequences from 25 to 1200 bp was investigated. Genomic inverted repeats were readily created via the homologous insertion of an overlap extension PCR product containing a gene-specific region of the genome together with thyA coding sequence, creating inverted repeat sequences of various lengths flanking the thyA selection marker in the resulting genome. Inverted repeat sequences below 100 bp were stably propagated, while those above and up to 1200 bp were found to be transiently unstable under auxotrophic thymine selection. Excision efficiency improves with increases of the inverted repeat until 600-800 bp, indicating that the genomic stability of inverted repeat sequences is due to secondary structure formation. Its effectiveness of creating precise and scar-free gene deletions was further demonstrated by deleting a number of genes in E. coli. The procedure can be readily adapted for sequence integration and point mutations in E. coli genome. It also has the potential for applications on other bacteria for efficient gene deletions.

Direct and inverted repeats elicit genetic instability by both exploiting and eluding DNA double-strand break repair systems in mycobacteria

Repetitive DNA sequences with the potential to form alternative DNA conformations, such as slipped structures and cruciforms, can induce genetic instability by promoting replication errors and by serving as a substrate for DNA repair proteins, which may lead to DNA double-strand breaks (DSBs). However, the contribution of each of the DSB repair pathways, homologous recombination (HR), non-homologous end-joining (NHEJ) and single-strand annealing (SSA), to this sort of genetic instability is not fully understood. Herein, we assessed the genome-wide distribution of repetitive DNA sequences in the Mycobacterium smegmatis, Mycobacterium tuberculosis and Escherichia coli genomes, and determined the types and frequencies of genetic instability induced by direct and inverted repeats, both in the presence and in the absence of HR, NHEJ, and SSA. All three genomes are strongly enriched in direct repeats and modestly enriched in inverted repeats. When using chromosomally integrated constructs in M. smegmatis, direct repeats induced the perfect deletion of their intervening sequences ~1,000-fold above background. Absence of HR further enhanced these perfect deletions, whereas absence of NHEJ or SSA had no influence, suggesting compromised replication fidelity. In contrast, inverted repeats induced perfect deletions only in the absence of SSA. Both direct and inverted repeats stimulated excision of the constructs from the attB integration sites independently of HR, NHEJ, or SSA. With episomal constructs, direct and inverted repeats triggered DNA instability by activating nucleolytic activity, and absence of the DSB repair pathways (in the order NHEJ>HR>SSA) exacerbated this instability. Thus, direct and inverted repeats may elicit genetic instability in mycobacteria by 1) directly interfering with replication fidelity, 2) stimulating the three main DSB repair pathways, and 3) enticing L5 site-specific recombination.

Non-B DNA Secondary Structures and Their Resolution by RecQ Helicases

In addition to the canonical B-form structure first described by Watson and Crick, DNA can adopt a number of alternative structures. These non-B-form DNA secondary structures form spontaneously on tracts of repeat sequences that are abundant in genomes. In addition, structured forms of DNA with intrastrand pairing may arise on single-stranded DNA produced transiently during various cellular processes. Such secondary structures have a range of biological functions but also induce genetic instability. Increasing evidence suggests that genomic instabilities induced by non-B DNA secondary structures result in predisposition to diseases. Secondary DNA structures also represent a new class of molecular targets for DNA-interactive compounds that might be useful for targeting telomeres and transcriptional control. The equilibrium between the duplex DNA and formation of multistranded non-B-form structures is partly dependent upon the helicases that unwind (resolve) these alternate DNA structures. With special focus on tetraplex, triplex, and cruciform, this paper summarizes the incidence of non-B DNA structures and their association with genomic instability and emphasizes the roles of RecQ-like DNA helicases in genome maintenance by resolution of DNA secondary structures. In future, RecQ helicases are anticipated to be additional molecular targets for cancer chemotherapeutics.

Genomic characterization of Campylobacter jejuni strain M1

Campylobacter jejuni strain M1 (laboratory designation 99/308) is a rarely documented case of direct transmission of C. jejuni from chicken to a person, resulting in enteritis. We have sequenced the genome of C. jejuni strain M1, and compared this to 12 other C. jejuni sequenced genomes currently publicly available. Compared to these, M1 is closest to strain 81116. Based on the 13 genome sequences, we have identified the C. jejuni pan-genome, as well as the core genome, the auxiliary genes, and genes unique between strains M1 and 81116. The pan-genome contains 2,427 gene families, whilst the core genome comprised 1,295 gene families, or about two-thirds of the gene content of the average of the sequenced C. jejuni genomes. Various comparison and visualization tools were applied to the 13 C. jejuni genome sequences, including a species pan- and core genome plot, a BLAST Matrix and a BLAST Atlas. Trees based on 16S rRNA sequences and on the total gene families in each genome are presented. The findings are discussed in the background of the proven virulence potential of M1.

Sequence context affects the rate of short insertions and deletions in flies and primates

BACKGROUND

Insertions and deletions (indels) are an important evolutionary force, making the evolutionary process more efficient and flexible by copying and removing genomic fragments of various lengths instead of rediscovering them by point mutations. As a mutational process, indels are known to be more active in specific sequences (like micro-satellites) but not much is known about the more general and mechanistic effect of sequence context on the insertion and deletion susceptibility of genomic loci.

RESULTS

Here we analyze a large collection of high confidence short insertions and deletions in primates and flies, revealing extensive correlations between sequence context and indel rates and building principled models for predicting these rates from sequence. According to our results, the rate of insertion or deletion of specific lengths can vary by more than 100-fold, depending on the surrounding sequence. These mutational biases can strongly influence the composition of the genome and the rate at which particular sequences appear. We exemplify this by showing how degenerate loci in human exons are selected to reduce their frame shifting indel propensity.

CONCLUSION

Insertions and deletions are strongly affected by sequence context. Consequentially, genomes must adapt to significant variation in the mutational input at indel-prone and indel-immune loci.

Duplications between direct repeats stabilized by DNA secondary structure occur preferentially in the leading strand during DNA replication

To ascertain a leading or lagging strand preference for duplication mutations, several short DNA sequences, i.e. mutation inserts, were designed that should demonstrate an asymmetric propensity for duplication mutations in the two complementary DNA strands during replication. The design of the mutation insert involved a 7-bp quasi inverted repeat that forms a remarkably stable hairpin in one DNA strand, but not the other. The inverted repeat is asymmetrically placed between flanking direct repeats. This sequence was cloned into a modified chloramphenicol acetyltransferase (CAT) gene containing a -1 frameshift mutation. Duplication of the mutation insert restores the reading frame of the CAT gene resulting in a chloramphenicol resistant phenotype. The mutation insert showed greater than a 200-fold preference for duplication mutations during leading strand, compared with lagging strand, replication. This result suggests that misalignment stabilized by DNA secondary structure, leading to duplication between direct repeats, occurred preferentially during leading strand synthesis.

Context of deletions and insertions in human coding sequences

We studied the dependence of the rate of short deletions and insertions on their contexts using the data on mutations within coding exons at 19 human loci that cause mendelian diseases. We confirm that periodic sequences consisting of three to five or more nucleotides are mutagenic. Mutability of sequences with strongly biased nucleotide composition is also elevated, even when mutations within homonucleotide runs longer than three nucleotides are ignored. In contrast, no elevated mutation rates have been detected for imperfect direct or inverted repeats. Among known candidate contexts, the indel context GTAAGT and regions with purine-pyrimidine imbalance between the two DNA strands are mutagenic in our sample, and many others are not mutagenic. Data on mutation hot spots suggest two novel contexts that increase the deletion rate. Comprehensive analysis of mutability of all possible contexts of lengths four, six, and eight indicates a substantially elevated deletion rate within YYYTG and similar sequences, which is one of the two contexts revealed by the hot spots. Possible contexts that increase the insertion rate (AT(A/C)(A/C)GCC and TACCRC) and decrease deletion (TATCGC) or insertion (GCGG) rates have also been identified. Two-thirds of deletions remove a repeat, and over 80% of insertions create a repeat, i.e., they are duplications.

Natural selection and the emergence of a mutation phenotype: an update of the evolutionary synthesis considering mechanisms that affect genome variation

Most descriptions of evolution assume that all mutations are completely random with respect to their potential effects on survival. However, much like other phenotypic variations that affect the survival of the descendants, intrinsic variations in the probability, type, and location of genetic change can feel the pressure of natural selection. From site-specific recombination to changes in polymerase fidelity and repair of DNA damage, an organism's gene products affect what genetic changes occur in its genome. Through the action of natural selection on these gene products, potentially favorable mutations can become more probable than random. With examples from variation in bacterial surface proteins to the vertebrate immune response, it is clear that a great deal of genetic change is better than "random" with respect to its potential effect on survival. Indeed, some potentially useful mutations are so probable that they can be viewed as being encoded implicitly in the genome. An updated evolutionary theory includes emergence, under selective pressure, of genomic information that affects the probability of different classes of mutation, with consequences for genome survival.

Analysis of the Pseudomonas aeruginosa oprD gene from clinical and environmental isolates

Genomes are constantly evolving. Our report highlights the wide mutational diversity of clinical as well as environmental isolates, compared with the laboratory strain(s), through the systematic genetic analysis of a chromosomal porin gene (oprD) in relation to a specific antibiotic resistance. Mutational inactivation of the oprD gene is associated with carbapenem resistance in Pseudomonas aeruginosa. The sequence of the oprD gene of 55 Pseudomonas aeruginosa natural isolates obtained from across the world--from sources as diverse as patients and rhizospheres--was analysed. A microscale mosaic structure for this gene--resulting from multiple intra- and possibly interspecies recombinational events--is reported. An array of independent and seemingly fast-occurring defective oprD mutations were found, none of which had been described before. A burn wound isolate demonstrated unusually high overall sequence variability typical of mutator strains. We also present evidence for the existence of OprD homologues in other fluorescent pseudomonads.

Base composition of mononucleotide runs affects DNA polymerase slippage and removal of frameshift intermediates by mismatch repair in Saccharomyces cerevisiae

The postreplicative mismatch repair (MMR) system is important for removing mutational intermediates that are generated during DNA replication, especially those that arise as a result of DNA polymerase slippage in simple repeats. Here, we use a forward mutation assay to systematically examine the accumulation of frameshift mutations within mononucleotide runs of variable composition in wild-type and MMR-defective yeast strains. These studies demonstrate that (i) DNA polymerase slippage occurs more often in 10-cytosine/10-guanine (10C/10G) runs than in 10-adenine/10-thymine (10A/10T) runs, (ii) the MMR system removes frameshift intermediates in 10A/10T runs more efficiently than in 10C/10G runs, (iii) the MMR system removes -1 frameshift intermediates more efficiently than +1 intermediates in all 10-nucleotide runs, and (iv) the repair specificities of the Msh2p-Msh3p and Msh2p-Msh6p mismatch recognition complexes with respect to 1-nucleotide insertion/deletion loops vary dramatically as a function of run composition. These observations are relevant to issues of genome stability, with both the rates and types of mutations that accumulate in mononucleotide runs being influenced by the primary sequence of the run as well as by the status of the MMR system.

Chemotherapeutically induced deletion of expanded triplet repeats

The number of neurodegenerative disorders associated with the expansion of DNA repeats, currently about 18, continues to increase as additional diseases caused by this novel type of mutation are identified. Typically, expanded repeats are biased toward further expansion upon intergenerational transmission, and disease symptoms show an earlier age of onset and greater severity as the length of the triplet repeat tract increases. Most diseases exhibit progressive neurological and/or muscular degeneration that can lead to total disability and death. As yet, no treatment exists for the genetic basis of any repeat disease. Given that the severity of these diseases is related to repeat tract length, reducing repeat lengths might delay the onset and reduce disease severity. Here, we test the hypothesis that the introduction of damage into DNA, which results in subsequent repair events, can lead to an increased rate of repeat deletion. Applying a sensitive genetic assay in Escherichia coli [Mut. Res. 502 (2002) 25], we demonstrate that certain DNA damaging agents, including EMS, ENU, UV light, and anticancer agents mitomycin C, cisplatin, and X-rays increase the rate of deletion of (CTG).(CAG) repeats in a length and orientation dependent fashion. In addition, oxidative damage to DNA also increases the deletion rate of repeats. These results suggest that a chemotherapeutic approach to the reduction in triplet repeat length may provide one possible rationale to slow, stop, or reverse the progression of these diseases.

Replication slippage involves DNA polymerase pausing and dissociation

Genome rearrangements can take place by a process known as replication slippage or copy-choice recombination. The slippage occurs between repeated sequences in both prokaryotes and eukaryotes, and is invoked to explain microsatellite instability, which is related to several human diseases. We analysed the molecular mechanism of slippage between short direct repeats, using in vitro replication of a single-stranded DNA template that mimics the lagging strand synthesis. We show that slippage involves DNA polymerase pausing, which must take place within the direct repeat, and that the pausing polymerase dissociates from the DNA. We also present evidence that, upon polymerase dissociation, only the terminal portion of the newly synthesized strand separates from the template and anneals to another direct repeat. Resumption of DNA replication then completes the slippage process.

Structure and dynamics of three-way DNA junctions: atomic force microscopy studies

We have used atomic force microscopy (AFM) to study the conformation of three-way DNA junctions, intermediates of DNA replication and recombination. Immobile three-way junctions with one hairpin arm (50, 27, 18 and 7 bp long) and two relatively long linear arms were obtained by annealing two partially homologous restriction fragments. Fragments containing inverted repeats of specific length formed hairpins after denaturation. Three-way junctions were obtained by annealing one strand of a fragment from a parental plasmid with one strand of an inverted repeat-containing fragment, purified from gels, and examined by AFM. The molecules are clearly seen as three-armed molecules with one short arm and two flexible long arms. The AFM analysis revealed two important features of three-way DNA junctions. First, three-way junctions are very dynamic structures. This conclusion is supported by a high variability of the inter-arm angle detected on dried samples. The mobility of the junctions was observed directly by imaging the samples in liquid (AFM in situ). Second, measurements of the angle between the arms led to the conclusion that three-way junctions are not flat, but rather pyramid-like. Non-flatness of the junction should be taken into account in analysis of the AFM data.