The effects of file size, sodium hypochlorite and blood on the accuracy of Root ZX apex locator in enlarged root canals: an in vitro study

Influence of Embedding Medium on iPex Electronic Apex Locator Accuracy: An Ex Vivo Comparative Study Using Alginate, Saline, and Gelatin Models

AIM

Accurate working length determination during root canal treatment is essential for achieving successful outcomes. This study aimed to evaluate the impact of embedding medium on the accuracy of iPex electronic apex locator (EAL).

MATERIALS AND METHODS

Sixty-one extracted single-rooted teeth were decoronated and coronally flared with Gates-Glidden burs. Actual canal length (ACL) was obtained by introducing a size 8 K-file until its tip reached the most coronal border of the apical foramen. This step was performed thrice and then averaged. Deducting 0.5 mm from the ACL provided the working length (WL). The teeth were randomly placed in plastic containers filled with freshly mixed alginate, gelatin, or saline, with the lip clip placed in the medium. The blinded operator obtained electronic measurements using iPex by advancing a K-file with a size compatible with the canal attached to the file clip and advanced until the 0.0 mark, then withdrawn to the 0.5 mark. This step was performed thrice and then averaged. Data were analyzed using ANOVA and Tukey's post hoc test, with significance level set at 5% (α = 0.05).

RESULTS

The mean difference between WL and iPex length obtained in the gelatin model was significantly longer than the difference with mean iPex length in alginate (p = 0.005) and in saline (p < 0.001). There was no significant difference between iPex readings obtained in alginate and saline (p = 0.249).

CONCLUSION

The use of freshly mixed alginate or saline for ex vivo assessment of iPex is recommended, whereas the use of gelatin could increase the chances of readings longer than looked for.

CLINICAL SIGNIFICANCE

Identifying the optimum embedding medium for ex vivo testing of EALs permits the comparison and assessment of several factors affecting EALs' precision under standardized conditions. This helps in understanding EAL performance in vivo and in optimizing its clinical utilization.

Influence of Hand File Size on the Accuracy of Root ZX and iPex Electronic Apex Locators: An In Vitro Study

OBJECTIVE

To investigate the effect of the hand file size on the accuracy of Root ZX (J. Morita Co., Kyoto, Japan) and iPex (NSK, Tochigi, Japan).

METHODS

Seventy-five single-rooted teeth were decoronated, and canals were coronally flared with Gates Glidden burs sizes 4, 3, and 2. Actual canal length was determined by averaging two readings obtained by inserting K-file size 8 until its tip was apparent at the most coronal border of the apical foramen. The reference length was actual length-0.5 mm. The blinded operator utilized Root ZX and iPex following the manufacturer's recommendations. Teeth were placed in sponge blocks soaked with Ringer's solution. Canals were irrigated with 5% sodium hypochlorite. K-file size 8 was attached to the lip clip and introduced until the APEX/0.0 mark, then withdrawn to the 0.5 mark. A stable meter gauge for five seconds indicated an acceptable reading. Readings with sizes 10 and 15 were obtained afterward. All measurements were done twice, then averaged. Data analysis was done using ANOVA and a posthoc Bonferroni test with the significance level set at P<0.05.

RESULTS

For Root ZX, the mean length with size 8 was not significantly different from the mean reference length (P=0.205). The same was found for its mean length at size 10 (P=0.093). However, the mean Root ZX length with size 15 was significantly shorter than the mean reference length (P=0.019). Mean iPex lengths with sizes 8, 10, and 15 were all significantly shorter than the mean reference length (P=0.038, 0.006, and 0.02, respectively).

CONCLUSION

The size of the hand file affected the precision of Root ZX and iPex.

Influence of Open Apex on Working Length Determination Using Cone-Beam Computed Tomography and Apex Locators: A Comparative In Vitro Study

Objectives

The aim of this study is to assess the effect of open apex on working length (WL) determination with aid of cone-beam computed tomography (CBCT) and electronic apex locators (EALs).

Methods

Thirty-two extracted human mandibular premolars were selected, and apical 5 mm was removed. Root canals were prepared from the apical to the coronal direction of the canal using peeso reamers up to size 5 (retrograde) to simulate open apex. The samples were analyzed by CBCT, and WL was established (CWL) by a radiologist. An endodontist prepared the access cavities, and visual working length (VWL) was recorded. The samples were embedded in a freshly mixed alginate mould up to cementoenamel junction. Each root canal length was measured with two different EALs—Root ZX mini and i Root. The measurements were repeated 3 times by using a digital caliper, and the mean was recorded by the endodontist who was blinded to the results of the CWL. The recorded data was statistically analyzed using the SPSS software.

Results

The results of this study showed statistically significant difference between VWL and i Root, CWL and i Root, and Root ZX mini and i Root (p < 0.05). Amongst EALs, a superior accuracy was noted for Root ZX mini than as compared to i Root. However, no statistically significant difference was seen between Root ZX mini and CWL (p > 0.05).

Conclusion

The present study showed that CWL is as accurate and reliable as VWL which is the gold standard. Amongst EALs, Root ZX mini performed more accurately than i Root. Preexisting CBCT scans should be used as an advantage in determining WL.

Kök Uçları Farklı Açılarda Rezeke Edilmiş Dişlerin Cerrahi Olmayan Yeniden Tedavilerinde 3 Elektronik Apeks Bulucunun Doğruluğu: In-Vitro Çalışma

Aim: The accuracy of three electronic apex locators (EALs) during retreatment of root-end resected teeth with different resection bevel angles were evaluated in the present study. Materials and Methods: Forty mandibular premolar teeth were divided into two groups regarding resection bevel angle after root canal filling. In the first group, the apical 3 mm of each specimen was resected at a 0-degree bevel angle using a diamond bur. The resection bevel angle was approximately 45-degree in the second group. Electronic length measurements were obtained with a size 15 K-file advanced apically in dissolved gutta percha using Dentaport ZX, Propex Pixi, and Apit 15. The filling materials were then completely removed from the root canals, and the actual lengths up to the resection region were determined. The actual length was subtracted from the electronic length measurements for each specimen. Measurements were analyzed statistically using independent sample t-test, repeated-measures analysis of variance, and Bonferroni tests. The level of statistical significance was defined as P

Effect of Sodium Hypochlorite Concentration on Electronic Apex Locator Reliability

This ex vivo study aimed to measure the performance of an electronic apex locator (EAL) in the presence of sodium hypochlorite irrigants with different concentrations. Two EALs (Root ZX Mini and Locapex 6) were used to locate the apical foramen in 10 extracted single-rooted teeth in the presence of 0.5%, 2.5% and 5% sodium hypochlorite. Visual working lengths were also determined using #10 K-file under a microscope before the electronic measurements were made. The performance of both EALs was compared for the electronic working lengths determined under the different concentrations of sodium hypochlorite. A multiple-way ANOVA and PLSD Fisher’s test with an α risk fixed at 5% were conducted. There were no statistical differences in the working lengths determined by both EALs between the three groups with different concentrations of sodium hypochlorite and their visual control measurements. When a ± 0.5 mm margin was applied, the Root ZX Mini and the Locapex 6 presented 88% and 83% accuracy, respectively. Sodium hypochlorite concentration in irrigants does not affect the accuracy and reliability of either the Root ZX Mini or the Locapex 6. Electronic apex locators are reliable with any concentration of sodium hypochlorite irrigants.

Apexoconnection: A Novel Technique to Determine Working Length

Purpose

The aim of this study was to evaluate and compare the accuracy of working length (WL) determination when using the conventional electronic WL (EWL) technique versus using the novel Apexoconnection technique involving EWL with a connector (EWLc).

Materials and Methods

Sixty extracted posterior teeth with a total of 118 root canals were selected for the study. The real WL (RWL) of each canal was verified using a dental microscope under 25.6x magnification. Root canal lengths were measured with an apex locator using the attachment device directly attached to the hand file in the root canal and then adding another hand file as a connector between the attachment device and the file in the root canal. The distance from the file’s stopper to its tip was measured using a digital caliper. Statistical analysis was carried out to analyze the data between experimental groups.

Results

The results of the statistical test showed that the differences in the WL determined by either technique and the proper length as determined under the microscope were not statistically significant. The results of the statistical test comparing the groups were also not statistically significant.

Conclusion

In this in vitro study, both the novel and conventional techniques were equally accurate for determining WL when compared with the RWL.

Accuracy of Root ZXII, E-PEX and FIND apex locators in teeth with vital pulp: an in vivo study

This research evaluated, in vivo, the accuracy of three electronic apex locators - EALs (Root ZXII, E-PEX and FIND) in teeth with vital pulp submitted to biopulpectomy, preserving the periodontal stump. For this study, 90 single-rooted teeth with extraction indication were selected. After positive pulpal cold sensitivity test, pulp chamber access was performed. The cervical and middle thirds of root canals were instrumented with Reciproc R25, and the K#15 file was used as a standard instrument to determine working length, forming 2 groups: Constriction (insertion of the instrument until the apical constriction limit) and Foramen (insertion of the instrument until the foramen and then repositioning at constriction, without removing the file from the canal). The hand file was stabilized with a light-cured flow resin. After extraction, the samples were analyzed through microCT SkyScan 1272, with CTAN software, which evaluated the proximity between the tip of the file to the apical constriction, providing data for comparative analysis using Kruskal-Wallis and Dunn tests (p<0.05). There was a statistically significant difference in the abilities of the EALs to detect the apical constriction after reaching the foramen with Root ZX II showing higher accuracy (89%). However, there was no difference in the accuracy of the three EALs in detecting the apical constriction without reaching the foramen. Based on the present results, we conclude that EALs may show accurate measures in detecting apical constriction and foramen, even without damaging the periodontal stump in biopulpectomy.

Comparative evaluation of root ZX Mini® apex locator and radiovisiography in determining the working length of primary molars: An In Vivo study

INTRODUCTION

Working length determination is a crucial step for success of pulpectomy. Various new modalities have been developed. The newest technology includes EAL. Electronic apex locators require less chair side time, do not produce pain and avoid unnecessary radiation which makes it more superior in paediatric endodontic procedures.

AIM

To evaluate and compare Root ZX mini apex locator and Radiovisiography (RVG) for determining working length in primary molars.

MATERIALS AND METHODS

A sample of 30 primary molar teeth was subjected to working length determination by Root ZX mini and RVG. The data was collected and then tabulated and subjected to statistical analysis.

RESULTS

On comparison among two groups, it was found there was no difference between the efficiency of modalities. A positive correlation was seen among Root ZX mini and RVG (ICC ​= ​0.99).

CONCLUSION

Root ZX mini and radiovisiography are seen to be precise in determination of working length in primary molars. It can be said that Root ZX mini i. e the electronic apex locators can be used as an adjunct to Radiovisiography and conventional radiography.

Ex Vivo Evaluation of the Accuracy of 3 Electronic Apex Locators in Different Environments: A Micro-Computed Tomography Study

Objective:

The aim of this study was to compare the accuracy of three electronic apex locators (EALs) (Propex Pixi, Mini Root ZX, Raypex 5) in determining working length (WL) under different environments (existence of blood-pulp/sodium hypochlorite in root canal space) using micro-computed tomography (micro-CT) measurements.

Methods:

Twenty-five single-rooted human teeth that were scheduled for extraction were selected for the study. Measurements were performed with the Propex Pixi, Mini Root ZX, Raypex 5 in vivo conditions in the presence of NaOCl irrigant solution or blood-pulp tissue. After that the teeth were extracted and scanned using micro-CT. The measurements of WL obtained with the different EALs in different environments were statistically compared. Significance was set at P<0.05.

Results:

There were no significant differences among the WL measurements performed with EALs or micro CT groups under different clinical enviroments. All EALs tested gave reliable results in respect to apical constriction.

Conclusion:

The accuracy of the tested EALs is not affected by pulp tissues and blood or NaOCl.

Accuracy and stability of electronic apex locator length measurements in root canals with wide apical foramen: an ex vivo study

The aim of the current study was to determine the accuracy of electronic apex locator (EAL) measurements when using files of different sizes in roots with wide apical foramina while considering a new parameter of stability of EAL reading. Ten teeth with straight roots were subjected to a sequential widening of the apical foramen to 0.6, 0.7, and 0.8 mm. The roots were embedded after each enlargement stage in an alginate mold and subjected to EAL readings. Measurements were done using sequential K-file sizes and the self-adjusting file (SAF). Measurement stability was introduced as a new additional parameter. As the difference between the file size used and the apical diameter of the canal decreases, the results obtained were more accurate and stable. The stability and accuracy of the measurements coincided with each other in a statistically significant manner. Within the limitations of the present ex vivo study, it may be concluded that in straight canals with wide apical foramina of 0.6–0.8 mm, both SS K-files which fit snugly to the walls of apical foramen and the SAF file may offer both accurate and stable EAL measurements.

The influence of two forms of chlorhexidine on the accuracy of contemporary electronic apex locators

Background

Accurate determination of working length (WL) is crucial for the success of endodontic therapy. The aim of this study was to determine the influence of 2% chlorhexidine digluconate solution, 2% chlorhexidine digluconate gel and 2% hypochlorite solution on the accuracy of two devices: the Raypex 5 and the ApexDal.

Methods

Twenty-nine single-rooted human teeth were used in this study. The crowns were cut horizontally and embedded in an alginate mass. In each tooth, six endodontic measurements were made using two electronic apex locators (EALs): a Raypex 5 and an ApexDal. For each EAL, measurements were taken with the following products: 2% chlorhexidine solution (CHX-S group), 2% chlorhexidine gel (CHX-G group) and 2% NaOCl (NaOCl group). After performing an endodontic measurement, the endodontic instruments were stabilized with flow resin composite. Afterwards, the roots were removed from the alginate mass, and the apical one-third of each root was cut lengthways to recover the canal system. Last, the distance between the file tip and the apical foramen was measured under a microscope at 60 x magnification.

Results

Statistically significant differences were found between CHX-S and NaOCl and CHX-G and NaOCl, but no significant differences were detected between CHX-S and CHX-G during the testing of both devices. No statistically significant differences were observed between the Raypex 5 and ApexDal for all intracanal media tested.

Conclusion

The EALs Raypex 5 and ApexDal had higher accuracy in the anatomical foramen of the root containing chlorhexidine in the gel or in the solution form than in the canal containing sodium hypochlorite.

Influence of the Maxillary Sinus on the Accuracy of the Root ZX Apex Locator: An Ex Vivo Study

This study evaluated the accuracy of the Root ZX (J. Morita, Tokyo, Japan) electronic apex locator in determining the working length when palatal maxillary molar roots are in a relationship with the sinus. Seventeen human maxillary molars with vital pulp were scheduled for an extraction and implant placement as part of a periodontal treatment plan. The access cavity was prepared, and a #10 K file (Dentsply Maillefer, Ballaigues, Switzerland) was inserted into the palatal root using the Root ZX apex locator in order to determine the electronic working length (EWL); then, the teeth were extracted. To determine the real working length (RWL), a #10 K file was introduced into the root canal until its tip touched a glass plate. EWL and RWL were compared. Images reconstructed with CBCT (cone beam computerized tomography) revealed that eight palatal roots were related to the maxillary sinus, whereas nine were not. The results showed a significant difference between the EWL and the RWL of the palatal roots related to the sinus (p < 0.001). No significant difference was observed in measurements of roots not in contact with the sinus (p > 0.05). Within the study limitations, the reliability of Root ZX was influenced by the relationship of the roots with the maxillary sinus.

A comparative evaluation of two working length determination methods

The purpose of this study was to explore the level of agreement between the radiographic and the electronic apex locator (EAL) working length assessment methods, amongst teeth with different diagnoses. Working length measurements along with pulpal and periapical diagnoses data were collected from the Patient Registry Database of our Institution. The null hypothesis of this study was that pulp status does not affect the level of agreement between the two methods. The degree of agreement was assessed using the Bland-Altman method, followed by a Kruskal-Wallis test (a = 5%) that would allow the null hypothesis to be accepted. The EAL measurements agree in general with those provided by a 1.5 mm file placed coronal to the radiographic apex amid teeth with different pulpal diagnoses. Within the limitations of this study, we suggest that this setting (i.e. the distance) may be applied to all cases of endodontically treated teeth, despite the differences in pulpal diagnosis.

An in vivo comparison of accuracy of two electronic apex locators in determining working length using stainless steel and nickel titanium files

Purpose

A key factor affecting the success of endodontic treatment is correct determination of root canal working length (WL). The purpose of this in vivo study was to compare the accuracy of Propex II and iPex II electronic apex locator (EAL) in determining the WL under clinical conditions, to that of radiographic working length (RWL) using stainless steel (SS) and nickel–titanium (NiTi) hand files.

Patients and methods

Thirty-seven patients, with 60 anterior teeth (60 canals) scheduled for endodontic treatment participated in this study after ethical approval. Electronic working length (EWL) was determined by the Propex II and iPex II according to manufacturer’s instructions using SS Hand K-files and NiTi Hand files. RWL was determined after EWL determination. The results obtained with each EAL with SS and NiTi files were compared with RWL. Data was analyzed statistically at a significance level of p < 0.05. Interclass correlation coefficient was calculated.

Results

Statistical analysis revealed no significant difference between the EALs, indicating similar accuracies between them with respect to accuracy in determining the WL (p > 0.05). No significant difference was found between the EWL and RWL and between SS and NiTi files for WL determination (p > 0.05) as well. The result also displayed a high intraclass correlation coefficient between the RWL and EWL measurement methods.

Conclusion

Under the in vivo clinical conditions of this study, both Propex II and iPex II were similar to the RWL determination technique showing high correlation to RWL. Both are clinically acceptable EAL for WL determination and both SS hand K-file and NiTi file can be used interchangeably without compromising the WL during treatment.

Comparison of four electronic root canal length measurement devices

OBJECTIVE

The objective of this study is to evaluate the performance of four electronic root canal length measurement devices (ERCLMDs) [Root ZX, Raypex 6, ProPex II, and VDW Gold with ERCLMD] in wet and dry root canals with different major foramen diameters, in association with three file positions within the final 1 mm of canals.

MATERIALS AND METHODS

Fifty roots were divided into five groups that were instrumented apically to the terminus diameter using K-files 15, 20, 30, 40, and 60. ERCLMD measurements were made when the file tip was at major foramen, 0.5 mm and 1.0 mm short of the foramen, when the apex touched to the surface of saline or was immersed 3 mm into saline, and when the canal was dry or was irrigated with saline. The differences between the electronic lengths and the actual lengths were calculated. The data were analyzed using the three-, two-, and one-way ANOVA and the LSD test (p < .05).

RESULTS

Overall, the four ERCLMDs demonstrated 12.8% unstable and beyond the foramen measurements (11.3%). About 85% of the beyond the foramen measurements had foramen diameters 0.40 and 0.60. ERCLMD comparisons related to the file positions in the foramen diameters showed significant differences between ERCLMDs in each foramen diameter (p < .05).

CONCLUSIONS

All ERCLMDs provided highly accurate measurements within the final 1 mm of the foramen. Wet or dry canals and apex conditions did not adversely affect the accuracy of the ERCLMDs' readings. ProPex II located the file positions in the teeth with different foramen diameters more accurately than the other ERCLMDs.

The Effect of File Size and Type and Irrigation Solutions on the Accuracy of Electronic Apex Locators: An In Vitro Study on Canine Teeth

Measurements of the root canal during endodontic treatment have a significant influence on the course of the therapeutic process as well as on its final result in both human and veterinary medicine. The apical constriction should be the termination point for the preparation and filling of the root canal. This research was conducted with the use of a Septodont kit consisting of a small chamber filled with the examined solution in which a healthy second incisor was placed. The step back method was applied for the root canal preparation and master apical file of 30 was used. The working length was 22 mm. The examination was conducted with the use of steel as well as nickel titanium hand instruments. Different irrigation solutions and two types of apex locators were used. Measurements of the working length of the root canal showed dependence on the size of the instrument. Examinations carried out in various environments showed that analogical measurements were obtained only for sodium hypochlorite solutions. In other environments the measured sections were shortened. Comparative examinations with the use of steel instruments demonstrated insignificant measurement differences. Compared to these results, the measurements in nickel titanium group were characterized by more considerable deviations.

Influence of Blood on the Accuracy of Raypex 5 and Root ZX Electronic Foramen Locators: An In Vivo Study

Abstract The aim of this study was to evaluate in vivo the accuracy of the Raypex 5 and Root ZX electronic foramen locators (EFLs) in the presence of blood in the root canal space. Forty single-canal teeth scheduled for extraction were selected. Access cavity was prepared and coronal enlargement was carried out. Approximately two drops of blood were collected by finger prick and injected into the root canal space. The electronic working length (EWL) of each tooth by each device was established twice before (NB group) and after (WB group) injecting blood into the root canal. The tooth was extracted and the actual working length (AWL) was determined. Data were analyzed using McNemar's test. The accuracy rates of Raypex 5 and Root ZX within 0.5 mm in the NB group were 88.9% and 91.5%, with 83.3% and 86.2% in the WB group, respectively. There were no significant differences between the accuracy of each EFL in the two groups (p>0.05). Considering the NB and WB groups, there were no statistically significant differences in the accuracy of the EFLs (p>0.05). The presence of blood in the root canal space did not influence the accuracy of the EFLs.

An in vitro evaluation of the accuracy of four electronic apex locators using stainless-steel and nickel-titanium hand files

Objectives

The purpose of this in vitro study was to evaluate the accuracy of working length (WL) determination of four electronic apex locators (EALs), namely, Root ZX (RZX), Elements diagnostic unit and apex locator (ELE), SybronEndo Mini Apex locator (MINI) and Propex pixi (PIXI) using Stainless steel (SS) and nickel-titanium (NiTi) hand files. The null hypothesis was that there was no difference between canal length determination by SS and NiTi files of 4 EALs.

Materials and Methods

Sixty extracted, single rooted human teeth were decoronated and the canal orifice flared. The actual length (AL) was assessed visually, and the teeth were embedded in an alginate model. The electronic length (EL) measurements were recorded with all four EALs using SS and NiTi files at '0.5' reading on display. The differences between the AL and EL were compared.

Results

The results obtained with each EAL with SS and NiTi files were compared with AL. A paired sample t test showed that there was a statistical significant difference between EAL readings with SS and NiTi files for RZX and MINI (p < 0.05). The accuracy of RZX, ELE, MINI and PIXI within ± 0.5 mm of AL with SS/NiTi files were 93.3%/70%, 90%/91.7%, 95%/68.3%, and 83.3%/83.3%, respectively.

Conclusions

The results of this study indicate that Root ZX was statistically more accurate with NiTi files compared to SS files, while MINI was statistically more accurate with SS files compared to NiTi files. ELE and PIXI were not affected by the alloy type of the file used to determine WL.

In vitro evaluation of Root ZX and Raypex 6 in teeth with different apical diameters

Background:

There is a growing interest about electronic apex locators for working length determination. There are several studies dealing with their performance in different conditions.

Aims:

The aim of this study is to evaluate the accuracy of Root ZX and Raypex 6 in teeth with different apical diameters.

Materials and Methods:

Actual working length (AWL) of 80 single rooted teeth were determined as 0.5 mm short of apical foramen. The teeth were divided into 4 groups (n = 20). First group (G 0) included teeth with mature apices. Root canals of the other groups (G 32, G 57 and G 72) were enlarged until apical sizes of 0.32, 0.57 and 0.72 mm were obtained. Samples were embedded in alginate and electronic measurements (EM) were performed.

Statistical analysis:

was achieved with Fisher exact test.

Results:

Both devices revealed a high rate of success in G 0 and G 32. Their accuracy decreased significantly in G 57 and G 72 groups (P < 0.05). Intra-group results of Root ZX and Raypex 6 were similar (P > 0.05).

Conclusions:

Root ZX and Raypex 6 are reliable in teeth with mature apices. At foramen diameters exceeding 0.57 mm, their accuracy is susceptible.

Influence of tooth length on the accuracy of the Root ZX electronic apical foramen locator: an ex vivo study

OBJECTIVE

Electronic apical foramen locators are now widely used to determine working length. This study was designed to determine whether tooth length influenced the accuracy of the Root ZX device.

MATERIALS AND METHODS

Forty extracted maxillary canine teeth with a length range of 27-29 mm were selected. Access cavities were prepared and coronal flaring of canals performed. The teeth were mounted in self-polymerizing acrylic resin to facilitate horizontal sectioning except for the apical 3-4-mm portion of the root and embedded in alginate as the electronic medium. Electronic measurements were taken at the major foramen, 'zero' reading using the Root ZX and compared with the actual root canal length. The teeth were sectioned 3 mm from the coronal reference point to create a second group with shorter length; these reductions in the length continued six times in all to create seven groups of 40 specimens each. The actual and electronic lengths of specimens in each group were measured. Data were analyzed by Pearson's correlation coefficient.

RESULTS

Identical measurements between the actual and electronic root canal length from the longest to the shortest groups were 12.5%, 10.0%, 20.0%, 27.5%, 37.5%, 35.0% and 45.0%, respectively. There was a mild negative correlation between the precise measurements of the Root ZX and root canal lengths in the seven groups (r = -0.964, p < 0.001).

CONCLUSION

Under the conditions of the study, the Root ZX device was more accurate in shorter teeth compared to longer ones.

Accuracy of electronic apex locators to detect root canal perforations with inserted metallic posts: an ex vivo study

INTRODUCTION

The detection of possible root canal perforations caused during a metal post placement is frequently difficult to diagnose. The aim of this study was to investigate the accuracy of apex locators to diagnose such perforations.

MATERIALS AND METHODS

Thirty mesiolingual root canals of extracted mandibular molars were instrumented (30/.04) and a post space was prepared. A root canal perforation was intentionally made at the bi-furcation (n = 15). Metal posts were cemented in 15 perforated and 15 non-perforated root canals. The teeth roots were embedded in an agar-agar solution. The resulting measurements ("short" or "beyond" the apex) disclosed if a perforation could be identified with five different apex locators (ProPex II, Elements Apex Locator, Apex NRG, Raypex 5 and Raypex 6). The sensitivity and specificity (95% interval confidence) were calculated.

RESULTS

All devices excluded the absence of perforations (100% with 95% confidence interval [78%; 100%] specificity). The Apex NRG and Raypex 6 detected all perforations (100% with 95% confidence interval [78%; 100%] sensitivity). The ProPex II, Elements Apex Locator, and Raypex 5 detected 14 out of 15 perforations (93% with 95% confidence interval [68%; 100%] sensitivity).

CONCLUSIONS

All devices determined root canal perforations, due to metallic posts, within clinical acceptable ranges.

Accuracy of the Dentaport ZX apex locator for working length determination when retreating molar root canals

The aim of this study was to evaluate the accuracy of the Dentaport ZX apex locator for working length determination during root canal retreatment of mandibular molars. Fifteen extracted mandibular first molars with separate mesial canals and apical foraminae and one distal canal were selected. The mesiobuccal and distal canals were investigated; the length with the file tip at the major diameter was defined as the tooth length (TL). The canals were prepared with ProTaper files to 1 mm short of this and filled with gutta-percha and AH Plus sealer. One week later, the root fillings were removed using ProTaper retreatment files. Tooth length was remeasured and recorded as the retreatment tooth length (RTL). Then electronic measurements were taken at the major (electronic apex locator (EAL) major) and minor (EAL minor) foraminae as suggested by the instrument display. These lengths were compared with RTL and measurements 0.5 and 1 mm short of this distance. For both canals, no significant difference was found between RTL and EAL major, and 0.5 mm short of RTL and EAL minor (P > 0.05). There were significant differences found between all other readings. The Dentaport ZX could not detect the minor foramen accurately but was able to indicate the major foramen in molars undergoing a root canal retreatment procedure.

Accuracy of electronic apex locator in enlarged root canals with different root canal irrigants: an in vitro study

AIM

To evaluate the accuracy of Root ZX-II (J Morita Corp) apex locator in enlarged root canals with different root canal irrigants.

MATERIALS AND METHODS

48 freshly extracted single rooted mandibular premolar teeth were used. The apical enlargement was done up to #45 K-file as the master apical file (MAF). The teeth were randomly divided into 4 groups and mounted in an experimental apparatus. The following irrigants were used during electronic canal measurements: group 1: saline; group 2: 3% NaOCl; group 3: 2% chlorhexidine; group 4: 17% EDTA. The canal measurement was done with Root ZX-II apex locator using #10 and #45 K-file. Data were analyzed by two way ANOVA and Bonferroni multiple comparison test.

RESULTS

Statistical analysis showed that there was statistically significant difference between #10 and #45 K-file for group 1 (p < 0.01).

CONCLUSION

Root ZX-II was accurate in the presence of 3% NaOCl and 17% EDTA when measured with smaller and larger files. However, it was accurate in the presence of saline and 2% CHX when larger files were used.

Effect of pre-flaring and file size on the accuracy of two electronic apex locators

OBJECTIVE

This ex vivo study evaluated the effect of pre-flaring and file size on the accuracy of the Root ZX and Novapex electronic apex locators (EALs).

MATERIAL AND METHODS

The actual working length (WL) was set 1 mm short of the apical foramen in the palatal root canals of 24 extracted maxillary molars. The teeth were embedded in an alginate mold, and two examiners performed the electronic measurements using #10, #15, and #20 K-files. The files were inserted into the root canals until the "0.0" or "APEX" signals were observed on the LED or display screens for the Novapex and Root ZX, respectively, retracting to the 1.0 mark. The measurements were repeated after the preflaring using the S1 and SX Pro-Taper instruments. Two measurements were performed for each condition and the means were used. Intra-class correlation coefficients (ICCs) were calculated to verify the intra- and inter-examiner agreement. The mean differences between the WL and electronic length values were analyzed by the three-way ANOVA test (p<0.05).

RESULTS

ICCs were high (>0.8) and the results demonstrated a similar accuracy for both EALs (p>0.05). Statistically significant accurate measurements were verified in the pre-flared canals, except for the Novapex using a #20 K-file.

CONCLUSIONS

The tested EALs showed acceptable accuracy, whereas the pre-flaring procedure revealed a more significant effect than the used file size.

Effects of Dissolving Solutions on the Accuracy of an Electronic Apex Locator-Integrated Endodontic Handpiece

The effects of three dissolving agents on the accuracy of an electronic apex locator- (EAL-) integrated endodontic handpiece during retreatment procedures were evaluated. The true lengths (TLs) of 56 extracted incisor teeth were determined visually. Twenty teeth were filled with gutta-percha and a resin-based sealer (group A), 20 with gutta-percha and a zinc oxide/eugenol-based sealer (group B), and 16 roots were used as the control group (group C). All roots were prepared to TL. Guttasolv, Resosolv, and Endosolv E were used as the dissolving solutions. Two evaluations of the handpiece were performed: the apical accuracy during the auto reverse function (ARL) and the apex locator function (EL) alone. The ARL function of the handpiece gave acceptable results. There were significant differences between the EL mode measurements and the TL (P < 0.05). In these comparisons, Tri Auto ZX EL mode measurements were significantly shorter than those of the TL.

Comparative evaluation of accuracy of two electronic apex locators in the presence of various irrigants: An in vitro study

Context:

The establishment of appropriate working length is one of the most critical steps in endodontic therapy. Electronic apex locators have been introduced to determine the working length. The development of electronic apex locators has helped make the assessment of the working length more accurate and predictable, along with reduction in treatment time and radiation dose.

Objectives:

The aim of this study was to compare the efficacy of electronic apex locators after cleansing and shaping of the root canals and whether there was any alteration in accuracy when used in the presence of irrigants.

Materials and Methods:

Seventy extracted human permanent molars with mature apices were selected. Equal number of maxillary and mandibular permanent molars (35 each) were sectioned at the cemento-enamel junction. Access opening was done and only the mesiobuccal root canal was studied for the purpose of standardization. Electronic working length measurements were taken before and after preparation of the mesiobuccal canal with Root ZX and ProPex II using various irrigants.

Statistical Analysis Used:

The data were statistically analyzed using a paired t-test at 0.05 level of significance.

Results:

P-values for actual and final canal lengths for Root ZX employing NaoCl(0.001), CHX(0.006), LA(0.020) and for ProPex II was (0.001) respectively. When the data were compared, results were statistically significant (P < 0.05).

Conclusion:

Within the limitations of this study Root ZX can be considered to be an accurate electronic apex locator and CHX as irrigant matched more precisely with the actual canal length measurements.

In vivo accuracy of conventional and digital radiographic methods in confirming root canal working length determination by Root ZX

Objectives

To compare, in vivo, the accuracy of conventional and digital radiographic methods in determining root canal working length.

Material and Methods

Twenty-five maxillary incisor or canine teeth from 22 patients were used in this study. Considering the preoperative radiographs as the baseline, a 25 K file was inserted into the root canal to the point where the Root ZX electronic apex locator indicated the APEX measurement in the screen. From this measurement, 1 mm was subtracted for positioning the file. The radiographic measurements were made using a digital sensor (Digora 1.51) or conventional type-E films, size 2, following the paralleling technique, to determine the distance of the file tip and the radiographic apex.

Results

The Student "t" test indicated mean distances of 1.11 mm to conventional and 1.20 mm for the digital method and indicated a significant statistical difference (p<0.05).

Conclusions

The conventional radiographic method was found to be superior to the digital one in determining the working length of the root canal.

Clinical evaluation of Root ZX II electronic apex locator in primary teeth

AIM

To evaluate the accuracy of Root ZX II electronic apex locator (EAL) for root canal working length determination in primary teeth.

METHODS

Forty primary maxillary incisor teeth were included in the study. Root ZX II EAL was used to determine the electronic working length (EL). The working length obtained with EAL was evaluated using digital radiography with the measuring file set to EL. The samples were categorised into three groups. Group 1 (acceptable): file tip 0-1mm short of the radiographic apex; Group 2 (short): file tip > 1mm short of the apex and Group 3 (long): file tip beyond the apex. Digital radiographic working length (RL) was derived by adjusting EL to the radiographic apex. The assigned calibrations were tabulated and statistically analysed.

RESULTS

Group 1 included 28 out of 40 teeth indicating a clinical accuracy of 70%. Group 2 contained 10 (25%) teeth whereas group 3 had only 2 (5%) teeth.

STATISTICS

Pearson correlation coefficient statistical analysis showed a high correlation (r = +0.82; p<0.001) among the groups.

CONCLUSION

Root ZX II EAL can be used as a reliable device for obtaining root canal length in primary maxillary incisor teeth.

Critical diameter of apical foramen and of file size using the Root ZX apex locator: an in vitro study

INTRODUCTION

An evaluation was made of the accuracy of the Root ZX apex locator (J. Morita Corp, Tokyo, Japan) in widened foramina, considering the existing controversy over this issue in the literature.

METHODS

Ten single-root teeth were embedded in an alginate mold. The foramina were widened from 0.6 mm to 1.0 mm. The measurements were taken with all possible file sizes ≥#10. The statistical accuracy of the Root ZX was calculated for the different diameters and for the influence of file size.

RESULTS

The accuracy of the Root ZX apex locator with a range of error of ±0.5 mm was 87% in an apical foramen size of 0.6 mm and 84% using files size 45 or larger in an apical foramen size of 0.7 mm. With a tolerance of ±1 mm, the accuracy was 99% in an apical foramen size of 0.6 mm, 98% using files size 45 or larger in an apical foramen size of 0.7 mm, and 95% using files size 70 or larger in an apical foramen size of 0.8 mm. In the rest, accuracy was not certain. The measurements taken with smaller files were shorter. There were no cases of overestimation of the working length.

CONCLUSIONS

The Root ZX apex locator was accurate for an apical size of 0.6 mm, independently of the file size; between 0.7 to 0.8 mm, we should adjust the files to the foramen, whereas above size 0.9 mm the locator is not accurate. The results show that the accuracy of this electronic apex locator is gradually lost as the foramen widens. Considering the stable conditions of in vitro studies, our findings advise caution in clinical application of the locator.

Investigation of apex locators and related morphological factors

INTRODUCTION

The purpose of this study was to investigate the ability of three electronic apex locators (EALs) to detect the minor foramen and morphological influencing factors relative to working length determination.

METHODS

Three hundred fifty-six extracted teeth were decoronated, and the coronal portion of the canal was flared. The distance between the major foramen and the file tips (DMFF) was determined by different EALs. The relationship between the DMFFs determined by the EAL and the morphological features of the root apex was analyzed by linear regression analysis.

RESULTS

The average DMFFs were 0.261 mm, 0.376 mm, and 0.383 mm for the Root ZX (J. Morita, Kyoto, Japan), Raypex 5 (VDW, Munich, Germany), and Elements Apex Locator (SybronEndo, Anaheim, CA), respectively. The file tips determined by EALs were much closer to the major foramen in teeth with a "lateral major foramen" (p < 0.001). The area and diameters of the minor foramen were significantly related to the variation of the DMFFs determined by EALs.

CONCLUSION

When the "minor foramen" reading was given, the file tip connected to the Root ZX was much closer to the major foramen than the other two EALs. The minor foramen's morphology and the major foramen's location were both important influencing factors on the performance of EALs.

Negotiation of C-shaped canal systems in mandibular second molars

INTRODUCTION

The purpose of this study was to investigate the method of canal negotiation in the presence of differently C-shaped orifices using the micro-computed tomography technique.

METHODS

Forty-four extracted mandibular second molars with C-shaped roots were collected from a Chinese population. Size 10 or 15 K files were used to explore the canal orifices when viewed under the surgical operating microscope. Choices in the number and position of the files inserted into the canal system were based on the different orifice shape. After the teeth with files were scanned and reconstructed, the number and position of the files were analyzed.

RESULTS

Among 44 teeth, a total of 132 initial files were inserted into 83 orifices, in which 42 orifices had only one initial file, 33 with two, and 8 orifices had three files inserted. Eight main canals were not located because of canal bifurcations in the root, calcification, and dentin fusion.

CONCLUSION

This new method for negotiation combined with careful exploration may provide an effective way for indentifying the nature of the canal system and enhancing debridement in these complex canal anatomies.

The effect of file size on the accuracy of the raypex 5 apex locator: an in vitro study

Background and aims

Determining the proper length of the root canals is essential for successful endodontic treatment. The purpose of this in vitro study was to evaluate the effect of file size on the accuracy of the Raypex 5 electronic apex locator for working length determination of uninstrumented canals.

Materials and methods

Twenty maxillary central incisors with single straight canals were used. Following access cavity preparation, electronic working length by means of Raypex 5 apex locator and actual working length were determined. Data were analyzed using ANOVA with repeated measurements and LSD test.

Results

There was no significant difference between electronic and actual working lengths when a size 15 K-file was used.

Conclusion

Under the conditions of the present study, a size 15 K-file is a more suitable size for de-termining working length.

Ex vivo evaluation of the ability of four different electronic apex locators to determine the working length in teeth with various foramen diameters

BACKGROUND

The aim of this ex vivo study was to evaluate the accuracy of four electronic apex locators (EALs) to determine the working length in teeth with various foramen diameters. Our previous study revealed that electronically measured canal length was influenced by the root canal diameter. It is not known whether foramen size would interfere with the reading accuracy of an EAL.

METHODS

A total of 36 extracted human lower single rooted premolar teeth were divided into four groups of nine teeth each. In groups A, B and C, the root canals were instrumented using #10-80, #10-100 and #10-120 K-files, and the tip of size #80, #100 and #120 K-files were permitted to pass through the apical foramen to a length of 1mm, respectively. In group D, the teeth were instrumented using #10-140 K-files and the tip of #140 K-file was permitted to pass through the apical foramen to a length of 5 mm. Thus, the average apical foramen diameters in groups A, B, C and D were approximately 0.82 mm, 1.02 mm, 1.22mm and 1.5 mm, respectively. The teeth were then mounted in 1% agar and four EALs were used: Root ZX, Foramatron D10, Apex NRG and Apit 7. For electronic measurement, sizes #10 and #80, #10 and #100, #10 and #120, and #10 and #140 K-files were used for groups A, B, C and D, respectively. During electronic measurement the canals were flushed with 6% sodium hypochlorite solution.

RESULTS

Three-way ANOVA and Bonferroni test showed that EAL, file size and foramen size all had a significant influence on the measurement error (P<0.0001), with all the interactions between these three factors being significant (P<0.0001).

CONCLUSIONS

The four EALs were unreliable to determine the working length of teeth with a wide apical foramen, when using a small size file. The Root ZX and Foramatron D10 showed significantly better scores than the other two EALs and may be more reliable to determine the working length of teeth with a wide apical foramen, if a tight-fit file is used.

In vitro evaluation of the accuracy of five different electronic apex locators for determining the working length of endodontically retreated teeth

The aim of this study was to evaluate the accuracy of five electronic apex locators (EALs) in determining the working length (WL) of teeth after removal of the root canal obturation materials. A total of 32 extracted straight, single-rooted teeth were used. The actual canal length (AL) was determined and the WL was established by subtracting 0.5 mm from the AL. The root canals were instrumented and divided into two groups. One group (n = 6) served as control, while the other group (n = 26) was the experimental group. In the experimental group, the root canals were obturated using vertically compacted gutta-percha with AH 26 sealer. In both groups, the access cavities were restored with a provisional restoration and stored for 15 days at 37 degrees C and 100% humidity. The root canal obturation material was removed, and the teeth were then mounted in an experimental apparatus. Five EALs were used: Dentaport ZX, ProPex, Foramatron D10, Apex NRG and Apit 7. For the electronic measurement of canal length, a size 25 K-file was used. During measurement, the canal was irrigated with 2.5% sodium hypochlorite. The difference (D) between the AL and the electronically determined length (EDL), AL-EDL, was calculated and recorded for each measurement. Data were analysed by two-way anova and Fisher's PLSD test. In both groups, statistically significant differences were found among the EALs (P < 0.01). In conclusion, the Dentaport ZX, ProPex and Foramatron D10 were more accurate than the other two EALs in determining the WL in teeth after removal of the root canal obturation materials. However, the Apex NRG and Apit 7 were also reliable for determination of the WL in the majority of the cases.

Accuracy of three different electronic apex locators in detecting simulated horizontal and vertical root fractures

The aim of this in vitro study was to evaluate the accuracy of three electronic apex locators (EALs): Root ZX, Foramatron D10 and Apex NRG, in the detection of fractures in teeth having simulated horizontal and vertical root fractures. A total of 90 extracted intact, straight, single-rooted teeth were divided into six groups of 15 teeth each. In Groups A, B and C, an incomplete horizontal fracture was simulated by preparing a horizontal incision in the coronal, middle or apical portion of the root until the circumferential half of the canal was exposed in the horizontal plane respectively. In Groups D, E and F, an incomplete vertical root fracture was simulated by preparing a vertical straight incision to expose the canal in the coronal, middle or apical portion of the root all the way in the longitudinal plane respectively. The simulated fractures were 0.25 mm in thickness in all groups. The teeth were embedded in 1% agar and the canals were irrigated with saline solution during electronic measurement. Detection of the simulated root fractures was established with a size 10 K-file when the meter value reached 'APEX' on each EAL. In Groups A, B and C, Kruskal-Wallis tests revealed that there were no statistically significant differences between the three EALs. However, statistically significant differences were found among the EALs in Groups D, E and F (P < 0.0001, one-way anova and Tukey's post-hoc test). In conclusion, the three EALs tested were accurate and acceptable clinical tools in the detection of horizontal root fractures. However, the three EALs were unreliable in detecting the position of vertical root fractures.