Molecular characterization of intergeneric hybrid between Aspergillus oryzae and Trichoderma harzianum by protoplast fusion

Improving the regeneration rate of deep lethal mutant protoplasts by fusion to promote efficient L-lysine fermentation

BACKGROUND

L-lysine is widely used for feed and special diet products. The transformation of fermentation strains plays a decisive role in the development of these industries. Based on the mutation breeding theory and metabolic engineering methods, this study aimed to improve the regeneration rate of high-lethality protoplasts by combining multiple mutagenesis and homologous cell fusion techniques to efficiently concentrate multiple dominant mutations and optimize the L-lysine production strain Escherichia coli QDW.

RESULTS

In order to obtain the best protoplasts, the optimal enzymolysis time was selected as 4 h. The optimal lysozyme concentration was estimated at 0.8 mg/mL, because the protoplast formation rate and regeneration rate reached 90% and 30%, respectively, and their product reached the maximum. In this study, it was necessary that UV mutagenesis be excessive to obtain an expanded mutation library. For high lethality protoplasts, under the premise of minimal influence on its recovery, the optimal time for UV mutagenesis of protoplasts was 7 min, and the optimal time for thermal inactivation of protoplasts at 85 ℃ was 30 min. After homologous fusion, four fusion strains of E. coli were obtained, and their stability was analyzed by flow cytometry. The L-lysine yield of QDW-UH3 increased by 7.2% compared with that of QDW in a fermentation experiment, which promoted the expression of key enzymes in L-lysine synthesis, indicating that the combination of ultraviolet mutagenic breeding and protoplast fusion technology improved the acid-production level of the fusion strain.

CONCLUSION

This method provides a novel approach for the targeted construction of microbial cell factories.

Formation of recombinant bifunctional fusion protein: A newer approach to combine the activities of two enzymes in a single protein

The tissue of insects, pests, and fungi has a chitin layer followed by protein in the cell membrane. The complete biodegradation of chitin and protein-present in the waste requires the action of two enzymes, namely chitinase, and protease. Combining chitinase and protease in a single protein/enzyme will serve as a bifunctional enzyme that can efficiently degrade the chitin and protein-rich biomass. The present study was aimed to fuse these two enzymes to produce a single protein and study the kinetics of the recombinant fusion protein. A chitinase and alkaline protease genes were isolated, cloned, and expressed successfully as a fusion product in heterologous host Escherichia coli. The two native genes were successfully fused in E.coli by using flexible glycine–serine (G₄S)₂ linker (GGGGS, GS linker). The recombinant fusion protein in E.coli showed hydrolyzed chitin and protein on chitin and bovine serum albumin agar plates confirming the successful cloning and expression of chitinase and protease enzymes in a single fusion protein. The common pUC18-T7 mini vector with the ompA signal sequence helps the extracellular expression of fusion protein efficiently. The native gel electrophoresis revealed a molecular mass of purified protein as 92.0 kDa. The fusion protein’s maximal chitinase and protease activity occurred at pH 5.0 and 8.0 and 30 ⁰C, respectively resembling the individual enzymes’. In the kinetic studies of the fusion protein, it was observed that the presence of metal ions such as Cu²⁺, Na²⁺, and Ca²⁺; significantly enhanced the enzyme activities while organic solvents oxidants and chemicals have drastically affected the activities of both the enzymes in the fusion protein. No such fusion protein has been produced in a heterologous host yet. The reports on fusion protein with biomass-degrading capacity are also scarce. This is probably the first report of a bifunctional chitinase/protease expressed in E. coli.

Interspecific hybridization as a driver of fungal evolution and adaptation

Cross-species gene transfer is often associated with bacteria, which have evolved several mechanisms that facilitate horizontal DNA exchange. However, the increased availability of whole-genome sequences has revealed that fungal species also exchange DNA, leading to intertwined lineages, blurred species boundaries or even novel species. In contrast to prokaryotes, fungal DNA exchange originates from interspecific hybridization, where two genomes are merged into a single, often highly unstable, polyploid genome that evolves rapidly into stabler derivatives. The resulting hybrids can display novel combinations of genetic and phenotypic variation that enhance fitness and allow colonization of new niches. Interspecific hybridization led to the emergence of important pathogens of humans and plants (for example, various Candida and 'powdery mildew' species, respectively) and industrially important yeasts, such as Saccharomyces hybrids that are important in the production of cold-fermented lagers or cold-cellared Belgian ales. In this Review, we discuss the genetic processes and evolutionary implications of fungal interspecific hybridization and highlight some of the best-studied examples. In addition, we explain how hybrids can be used to study molecular mechanisms underlying evolution, adaptation and speciation, and serve as a route towards development of new variants for industrial applications.

Strain improvement of Trichoderma spp. through two-step protoplast fusion for cellulase production enhancement

Fungal protoplast fusion is an approach to introduce novel characteristics into industrially important strains. Cellulases, essential enzymes with a wide range of biotechnological applications, are produced by many species of the filamentous fungi Trichoderma. In this study, a collection of 60 natural isolates were screened for Avicel and carboxymethyl cellulose degradation, and two cellulase producers of Trichoderma virens and Trichoderma harzianum were used for protoplast fusion. One of the resulting hybrids with improved cellulase activity, C1-3, was fused with the hyperproducer Trichoderma reesei Rut-C30. A new selected hybrid, F7, was increased in cellulase activity 1.8 and 5 times in comparison with Rut-C30 and C1-3, respectively. The increases in enzyme activity correlated with an upregulation of the cellulolytic genes cbh1, cbh2, egl3, and bgl1 in the parents. The amount of mRNA of cbh1 and cbh2 in F7 resembled that of Rut-C30 while the bgl1 mRNA level was similar to that of C1-3. AFLP (amplified fragment length polymorphism) fingerprinting and GC-MS (gas chromatography - mass spectrometry) analysis represented variations in parental strains and fusants. In conclusion, the results demonstrate that a 3-interspecific hybrid strain was isolated, with improved characteristics for cellulase degradation and showing genetic polymorphisms and differences in the volatile profile, suggesting reorganizations at the genetic level.

A novel Trichoderma fusant for enhancing nutritional value and defence activity in chickpea

In recent years, due to the rise in food consumption, much of the attention has been focused to increase the yield of the agricultural crops which resulted in compromised nutritional quality. Efforts have to be undertaken to enhance the nutritional attributes of legumes, cereals and staple food crops by increasing amino acids and mineral content. In the present study, we evaluated a protoplast fusant (H. lixii MTCC 5659) for its ability to enhance nutritional value and defence activity in chickpea. Essential amino acids; methionine (9.82 mg kg^-1 dw), cysteine (2.61 mg kg^-1 dw), glycine (11.34 mg kg^-1 dw), valine (9.26 mg kg^-1 dw), and non-essential amino acids; aspartic acid (39.19 mg kg^-1 dw) and serine (17.53 mg kg^-1 dw) were significantly higher in seeds of fusant inoculated chickpea. Fusant significantly improved accumulation of mineral nutrients i.e. Cu (157.73 mg kg^-1 dw), Co (0.06 mg kg^-1 dw), Ni (1.85 mg kg^-1 dw), Zn (157.73 mg kg^-1 dw) and S (16.29 mg kg^-1 dw) in seeds. Biocontrol and defence activities of chickpea increased from 20 to 35% in fusant inoculated plants suggesting its potential to ameliorate biotic stress. To the best of our knowledge, this is the first report of an increase in amino acids and mineral content of chickpea by fusant inoculation.

Intergeneric fusant development using chitinase preparation of Rhizopus stolonifer NCIM 880

Fungal chitinase have tremendous applications in biotech industries, with this approach we focused on extracellular chitinase from Rhizopus stolonifer NCIM 880 for the formation of fungal protoplasts. The maximum chitinase production reached after 24 h at 2.5% colloidal chitin concentration in presence of starch as an inducer. Chitinase was extracted efficiently at 65% cold acetone concentration and then purified by using DEAE-Cellulose column chromatography. Purified chitinase having molecular weight 22 kDa with single polypeptide chain was optimally active at pH 5.0 and temperature 30 °C. The purified chitinase revealed kinetic properties like Km 1.66 mg/ml and Vmax 769 mM/min. Crude chitinase extract efficiently formed protoplasts from A. niger, A. oryzae, T. viride and F. moniliforme. The formed protoplasts of A. niger and T. viride showed 70 and 66% regeneration frequency respectively. Further, intergeneric fusants were developed successfully and identified at molecular level using RNA profiling. Thus, this study could be useful for strain improvement of various fungi for biotechnological applications.

Two genomes are better than one: history, genetics, and biotechnological applications of fungal heterokaryons

Heterokaryosis is an integral part of the parasexual cycle used by predominantly asexual fungi to introduce and maintain genetic variation in populations. Research into fungal heterokaryons began in 1912 and continues to the present day. Heterokaryosis may play a role in the ability of fungi to respond to their environment, including the adaptation of arbuscular mycorrhizal fungi to different plant hosts. The parasexual cycle has enabled advances in fungal genetics, including gene mapping and tests of complementation, dominance, and vegetative compatibility in predominantly asexual fungi. Knowledge of vegetative compatibility groups has facilitated population genetic studies and enabled the design of innovative methods of biocontrol. The vegetative incompatibility response has the potential to be used as a model system to study biological aspects of some human diseases, including neurodegenerative diseases and cancer. By combining distinct traits through the formation of artificial heterokaryons, fungal strains with superior properties for antibiotic and enzyme production, fermentation, biocontrol, and bioremediation have been produced. Future biotechnological applications may include site-specific biocontrol or bioremediation and the production of novel pharmaceuticals.

Bioreactor with Ipomoea hederifolia adventitious roots and its endophyte Cladosporium cladosporioides for textile dye degradation

In vitro grown untransformed adventitious roots (AR) culture of Ipomoea hederifolia and its endophytic fungus (EF) Cladosporium cladosporioides decolorized Navy Blue HE2R (NB-HE2R) at a concentration of 20 ppm up to 83.3 and 65%, respectively within 96h. Whereas the AR-EF consortium decolorized the dye more efficiently and gave 97% removal within 36h. Significant inductions in the enzyme activities of lignin peroxidase, tyrosinase and laccase were observed in roots, while enzymes like tyrosinase, laccase and riboflavin reductase activities were induced in EF. Metabolites of dye were analyzed using UV-vis spectroscopy, FTIR and gas chromatography-mass spectrometry. Possible metabolic pathways of NB-HE2R were proposed with AR, EF and AR-EF systems independently. Looking at the superior efficacy of AR-EF system, a rhizoreactor was developed for the treatment of NB-HE2R at a concentration of 1000 ppm. Control reactor systems with independently grown AR and EF gave 94 and 85% NB-HE2R removal, respectively within 36h. The AR-EF rhizoreactor, however, gave 97% decolorization. The endophyte colonization additionally increased root and shoot lengths of candidate plants through mutualism. Combined bioreactor strategies can be effectively used for future eco-friendly remediation purposes.