Enhanced removal of Congo red dye from aqueous solution by surface modified activated carbon with bacteria

β-Cyclodextrin network crosslinked by novel phosphonium-based tetrakiscarboxylic acid derived from PH3 tail gas: Synthesis and application for rapid removal of organic dyes from wastewater

Organic dyes, such as methyl orange (MO), Congo red (CR), crystal violet (CV) and methylene blue (MB), are common organic pollutants existing in wastewater. Therefore, the exploration of bio-based adsorbents for the efficient removal of organic dyes from wastewater has gained many attentions. Here, we report a PCl₃-free synthetic method for the synthesis of phosphonium-containing polymers, in which the prepared tetrakis(2-carboxyethyl) phosphonium chloride-crosslinked β-cyclodextrin (TCPC-β-CD) polymers were applied to the removal of dyes from water. The effects of contact time, pH (1-11), and dye concentration were investigated. The selected dye molecules could be captured by the host-gest inclusion of β-CD cavities, and the phosphonium and carboxyl groups in the polymer structure would respectively facilitate the removal of cationic dyes (MB and CV) and anionic dyes (MO and CR) via electrostatic interactions. In a mono-component system, over 99 % of MB could be removed from water within the first 10 min. Based on the Langmuir model, the calculated maximum adsorption capacities of MO, CR, MB, and CV were 180.43, 426.34, 306.57, and 470.11 mg/g (or 0.55, 0.61, 0.96 and 1.15 mmol/g), respectively. Additionally, TCPC-β-CD was easily regenerated using 1 % HCl in ethanol, and the regenerative adsorbent still showed high removal capacities for MO, CR, and MB even after seven treatment cycles.

Effects of terminal electron acceptors on the biodegradation of waste motor oil using Chlorella vulgaris-Rhodococcus erythropolis consortia: Kinetic and thermodynamic windows of opportunity analysis

The Chlorella vulgaris-Rhodococcus erythropolis consortia was constructed for the biodegradation of waste motor oil (WMO), combined with thermodynamic calculations and stoichiometric analyses. The microalgae-bacteria consortium was constructed as C. vulgaris: R. erythropolis = 1:1 (biomass, cell/mL), pH = 7, 3 g/L WMO. Under the same condition, the terminal electron acceptors (TEAs) play a crucial role in the WMO biodegradation, which follows Fe3+ >SO42- > none. The biodegradation of WMO fitted well with the first-order kinetic model under experimental temperatures with different TEAs (R2 >0.98). The WMO biodegradation efficiency reached 99.2 % and 97.1 % with Fe3+ and SO42-as TEAs at 37 °C, respectively. Thermodynamic methanogenesis opportunity windows with Fe3+ as TEA are 2.72 times fold as large as those with SO42-. Microorganism metabolism equations demonstrated the viability of anabolism and catabolism on WMO. This work lays the groundwork for the implementation of WMO wastewater bioremediation and supports research into the biochemical process of WMO biotransformation.

The Defects, Physicochemical Properties, and Surface Charge of MIL-88A (Al) Crystal Were Regulated for Highly Efficient Removal of Anionic Dyes: Preparation, Characterization, and Adsorption Mechanism

In this paper, the physicochemical properties, surface charge, and crystal defects of MIL-88A (Al) were controlled by adjusting the ratio of metal ligands and temperature in the synthetic system without the addition of surfactants. The adsorption properties of different crystals for Congo red (CR) were studied. Among them, MIL-88A (Al)-130 and MIL-88A (Al)-d have the best adsorption properties. The maximum adsorption capacities are 600.8 and 1167 mg · g^-1, respectively. Compared with MIL-88A (Al)-130, the adsorption performance of MIL-88A (Al)-d was increased by 94.2%, and the adsorption rate was increased by about 4 times. It can be seen that increasing the proportion of metal ligands within a certain range will improve the adsorption capacity. The structure and morphology of the adsorbent were characterized by XRD, FTIR, SEM, EDS, TGA, BET, and zeta potential. The effects of time, temperature, pH, initial solution concentration, and dosage on CR adsorption properties were systematically discussed. The pseudo-second-order kinetic model and Langmuir isothermal model can well describe the adsorption process, which indicates that the adsorption process is a single-layer chemisorption occurring on a uniform surface. According to thermodynamics, this adsorption is an endothermic process. The mechanism of CR removal is proposed as the electrostatic attraction, hydrogen bond, metal coordination effect, π-π conjugation, crystal defect, and pore-filling effect. In addition, MIL-88A (Al)-d has good repeatability, indicating that it is a good material for treating anionic dye wastewater.

Efficient adsorption of Congo red by micro/nano MIL-88A (Fe, Al, Fe-Al)/chitosan composite sponge: Preparation, characterization, and adsorption mechanism

MIL-88A crystals with three different metal ligands (Fe, Al, FeAl) were prepared by hydrothermal method for the first time. The three materials' crystal structure and surface morphology are different, leading to different adsorption properties of Congo red (CR). The maximum adsorption capacities of MIL-88A (Fe), MIL-88A (FeAl), and MIL-88A (Al) are 607.7 mg · g^-1, 536.4 mg · g^-1, and 512.1 mg · g^-1 respectively. In addition, MIL-88A was combined with chitosan (CS) respectively, and MIL-88A/CS composite sponge was prepared by the freeze-drying method, which not only solved the defect that MIL-88A powder was difficult to recover but also further improved the removal ability of CR by the adsorbent. The maximum adsorption capacities of MIL-88A (FeAl)/CS, MIL-88A (Fe)/CS, MIL-88A (Al)/CS, and CS are 1312 mg · g^-1, 1056 mg · g^-1, 996.7 mg · g^-1, and 769.6 mg · g^-1, respectively. The structure and physicochemical properties of the materials were analyzed by SEM, FTIR, XRD, TGA, BET, and Zeta. The adsorption process of CR follows pseudo-second-order kinetics and Langmuir, Sips isotherm model. Combined with thermodynamic parameters, the adsorption behavior was described as endothermic monomolecular chemical adsorption. The removal of CR is attributed to electrostatic interactions, hydrogen bonding, metal coordination effects, and size-matching effects.

The effective removal of Congo Red using a bio-nanocluster: Fe3O4 nanoclusters modified bacteria

A bio-nanocluster (Fe₃O₄@bacteria) was prepared by simply mixture using the bacterial suspension and Fe₃O₄ nanoclusters to remove Congo red (CR) contamination from water resources. The bio-nanocluster was characterized by SEM, TEM and XPS. Adsorption efficiency, adsorption process and adsorption mechanism were comprehensively investigated. The maximum adsorption capacity (Q_m) of CR dye onto the Fe₃O₄@bacteria peaked at 320.1 mg/g, which was 2.88 times that of Fe₃O₄ under the same condition. Based on the equilibrium and kinetic studies, the Langmuir isotherm theory and pseudo-first-order model is appropriate to describe the adsorption process. The adsorption of CR is spontaneous and exothermic according to the thermodynamics parameters (ΔG^θ, ΔH^θ and ΔS^θ). The adsorption force dominated the Van der Waals force, biofloculation and chemisorption. The Fe₃O₄@bacteria could be applied potentially as an absorbent with high efficiency and environmentally friendly remediation of dyeing wastewater.